| Status |
Title, Date, Author |
 | Looking Back: The Columnists, February - 2024, James H. Lindsay |
| Hexavalent-Chromium-Free Aluminum Sacrificial Paint Validation, Feb - 2023, Brad Wiley |
| Tin-Zinc Alloy Electroplating and Its Corrosion Behavior, June - 2023, K. Wang |
| SUR/FIN 2023: Capsules from the Technical Sessions I: Emerging Technologies, August - 2023, Dr. James H. Lindsay |
| Calculating Applied Media Force During Vibratory Finishing, September - 2023, William P. Nebiolo |
| Practical Observations in Surface Chemistry and Boundary Layer Control to Enable Scalable Electrochemical Operation, June - 2023, Timothy Hall |
| Nanostructure of Nanoparticles, Self-assembled Inorganic Nanopatterns and Hybrid Sol-Gel Coatings in Surface Engineering, November - 2023, Xavier Albort Ventura |
| Examining Metallic Fastener Finishes: Performance Factors and Future Trends, December - 2023, Mark Schario |
| The AES Monthly Review: Volume 1, Number 1 (June 1914) Back to the Beginning, December - 2023, James H. Lindsay |
| A Novel Surface Finishing Technology for Alloys, May - 2023, Chris Goode |
| Analysis of Multi-component Dye Baths using CIELAB and Reflectance Spectrophotometry, April - 2023, Jacqueline Cook |
| Development of a Novel Hexavalent-Chromium-Free Aluminum Sacrificial Paint, Feb - 2023, Bruce McMordie |
| Electrodeposited Nickel Composites Containing Diamond Particles, April - 2023, J. Zahavi |
| Robust Colored Coating on Light Metal Alloys, May - 2023, Chris Goode |
| Nanostructure of the Anodic and Nanomaterials Nanoparticles in Polyelectrolyte Multilayer-by-Layer (LbL) Films, Nov - 2022, Xavier Albort Ventura |
| Zinc - An Important Nutrient, Jan - 2022, Jack Dini |
| Electrochemical Destruction of Perfluorooctanesulfonate
in Electroplating Wastewaters, Jan - 2022, Brian Chaplin |
| Development of a Sustainability Metrics System
and
a Technical Solution Method for Sustainable Metal Finishing, Jan - 2022, Yinlun Huang |
| A Process for Alkaline Non-cyanide Silver Plating for
Direct Plating on Copper, Copper Alloys and Nickel Without a Silver Strike Bath, Feb - 2022, Eric Olander |
| Phosphorus - Important to Platers, But More Important to Our Bodies, Feb - 2022, Jack Dini |
| The Basics of Automotive Surface Engineering by Isotropic Superfinishing, Mar - 2022, William P. Nebiolo |
| Electrochemical Approaches to Treatment of PFAS in Plating Wastewater, Mar - 2022, Prof. Qingguo (Jack) Huang |
| Improving the Wear Performance of Functional Trivalent Chromium Plating
Via Pulse-Reverse Electrodeposition, Apr - 2022, Andrew Moran |
| Development of a Sustainability Metrics System
and
a Technical Solution Method for Sustainable Metal Finishing, Apr - 2022, Yinlun Huang |
| Developing Standardized Testing for Trivalent Chromium Thickness - A Progress Report, Jun - 2022, Mark Schario |
| The History of Electroplating And A Historical Review of the Evolution of NASF, Aug - 2022, William P. Nebiolo |
| Non-PFAS Wetting Agents for Decorative Chromium(VI) Plating, Sep - 2022, Paul Madden |
| Development of a Sustainability Metrics System
and
a Technical Solution Method for Sustainable Metal Finishing, Aug - 2021, Yinlun Huang |
| Alumina Reinforced ENiP Offers a Versatile Substitute for Electroplated Hard Chromium, Jan - 2021, Leng Tay |
| Development of a Sustainability Metrics System and a Technical Solution Method for Sustainable Metal Finishing, Apr - 2021, Yinlun Huang |
| A Novel, Structurally Colored Coating for Aluminum Alloys, Apr - 2021, Ian Mardon |
| Gold's Many Uses, Mar - 2021, Jack Dini |
| Electrochemical Approaches to Treatment of PFAS in Plating Wastewater, Mar - 2021, Prof. Qingguo (Jack) Huang |
| Development of a Sustainability Metrics System
and
a Technical Solution Method for Sustainable Metal Finishing, Oct - 2021, Yinlun Huang |
| Silver:
From Decorative Jewelry to Infection Fighter
to Andy Warhol to the Manhattan Project, Sep - 2021, Jack Dini |
| Electro-codeposition of MCrAlY Coatings
for Advanced Gas Turbine Applications, May - 2021, Ying Zhang |
| Searching for Gold, May - 2021, Jack Dini |
| Electro-codeposition of MCrAlY Coatings
for Advanced Gas Turbine Applications, Jun - 2021, Ying Zhang |
| A Microscopic Study of Chromium Plating, Jun - 2021, M.H. Jones |
| Toxins That Can Help Us, Jul - 2021, Jack Dini |
| Qualitative Approach to Pulse Plating, Jul - 2021, Jean-Claude Puippe |
| Development of a Sustainability Metrics System
and
a Technical Solution Method for Sustainable Metal Finishing, Aug - 2021, Yinlun Huang |
| Mechanical Properties of Electroformed Metals
An Excerpt from the AESF Electroforming Course - 1996, Aug - 2021, |
| Electrochemical Approaches to Treatment of PFAS in Plating Wastewater, Sep - 2021, Qingguo (Jack) Huang |
| Silver:
From Decorative Jewelry to Infection Fighter
to Andy Warhol to the Manhattan Project, Sep - 2021, Jack Dini |
| Electrochemical Destruction of Perfluorooctanesulfonate
in Electroplating Wastewaters, Oct - 2021, Brian Chaplin |
| Development of a Sustainability Metrics System
and
a Technical Solution Method for Sustainable Metal Finishing, Oct - 2021, Yinlun Huang |
| Hybrid Sol-Gel Coatings in Surface Engineering: A Review, Nov - 2021, Xavier Albort Ventura |
| Electroforming of Electronic Devices [1997], Nov - 2021, Lubomyr T. Romankiw |
| The Sacrifices of World War II in the Plating Industry -
A Reflection in Light of the Covid Pandemic, Dec - 2021, James H. Lindsay |
| Electrochemical Approaches to Treatment of PFAS in Plating Wastewater, Dec - 2021, Prof. Qingguo (Jack) Huang |
| The 55th William Blum Lecture, Modeling and Simulation for the Finishing Industry, Nov - 2021, Dr. Keith Legg |
| AES Research Project #41: Plating on Aluminum Immersion Deposit Pretreatments for Electroplating on Aluminum Part 1: A Literature Review, Jul - 2020, David S. Lashmore |
| Celebrities Who Once Worked in Electroplating, Jul - 2020, Jack Dini |
| AES Research Project #41: Plating on Anodized Aluminum Part 3: Pore Structure and Bonding, Aug - 2020, David S. Lashmore |
| AES Research Project #41: Plating on Aluminum Immersion Coatings on Aluminum Part 2: Morphology, Jul - 2020, |
| AES Research Project #41: Part 4: Adhesion Failure of Electrodeposited Coatings on Anodized Aluminum Alloys, Aug - 2020, David E. Thomas |
| 1st Quarterly Report April-June 2020 AESF Research Project #R-121: Development of a Sustainability Metrics System and a Technical Solution Method for Sustainable Metal Finishing, Sep - 2020, Yinlun Huang |
| Copper - More Than Just a Metal We Electroplate, Sep - 2020, Jack Dini |
| Electro-codeposition of MCrAlY Coatings for Advanced Gas Turbine Applications, Oct - 2020, Ying Zhang |
| Electro-codeposition of MCrAlY Coatings for Advanced Gas Turbine Applications, Oct - 2020, Prof. Ying Zhang |
| Thermal Aging Effects Between Thick-Film Metallizations and Reflowed Solder Creams, Oct - 2020, S.J. Muckett |
| An Introduction to Fundamental Research on the Mechanism of the Electrodeposition of Metals, Nov - 2020, Brian E. Conway |
| Understanding the Anodic Oxide Finish – The First Commercially Available Nanoscale Coating, Nov - 2020, Jude M. Runge |
| A Novel Pretreatment Process for Direct Electrodeposition onto Aluminum Alloys, Dec - 2020, J. Xu |
| Development of a Sustainability Metrics System and a Technical Solution Method for Sustainable Metal Finishing, Dec - 2020, Yinlun Huang |
| Direct Copper Metallization of Aluminum: Elimination of Zincate, Jan - 2019, Richard DePoto |
| AES Research Project #16: Final Report (1965) On the Mechanism of Metal Electrocrystallization, Jan - 2019, A. Damjanovic |
| Innovative, Hybrid? Functional Coatings for Aluminum and Titanium Substrates, Feb - 2019, Chris Goode |
| Crack Formation during Electrodeposition and Post-deposition Aging of Thin Film Coatings, Feb - 2019, Stanko R. Brankovic |
| Cyanide Destruction: A New Look at an Age-Old Problem, Mar - 2019, Robin Deal |
| Phosphates: How They Impact Your Discharge, Mar - 2019, Robin Deal |
| Electro-codeposition of MCrAlY Coatings for Advanced Gas Turbine Applications, Apr - 2019, Ying Zhang |
| Nanoporous Anodic Oxides: Fabrication, Applications, Sensing and Biosensing, Apr - 2019, Xavier Albort Ventura |
| The Mechanism of Nickel Corrosion in ENEPIG Deposits and How to Mitigate It, May - 2019, George Milad |
| Advancements in Brush Plated Metal Matrix Composites, May - 2019, Danijela Milosevic-Popovich |
| Beyond Ni/Au: Next Generation Corrosion-Resistant Finishes for Electronics Applications, Jun - 2019, Rob Schetty |
| An Improvement in the Zincate Method for Plating on Aluminum, Jun - 2019, T.E. Such |
| Transition from a Simple Auxiliary Anode to a Fully-developed Conforming Anode System for Plating, Jul - 2018, LaRon Brown |
| Acid Copper Technologies for Plating on Plastics, Jul - 2018, Chrissy Pullara |
| Rack and Anode Effects on the Distribution of Functional Chromium Electrodeposits, Aug - 2018, E.C. Knill |
| The Effects of Stopoffs and Thieves on the Distribution of Functional Chromium Electrodeposits, Aug - 2018, E.C. Knill |
| The Effects of Shields and Baffles on the Distribution of Functional Chromium Electrodeposits, Aug - 2018, E.C. Knill |
| Innovative Applications of Electroplating and PVD for New Material Solutions, Jun - 2018, Dr. Per Møller |
| Electro-codeposition of MCrAlY Coatings for Advanced Gas Turbine Applications, Sep - 2018, Ying Zhang |
| Advances in Decorative PVD Chromium Coatings for Polymer Substrates, Oct - 2018, Gary Vergason |
| Crack Formation during Electrodeposition and Post-deposition Aging of Thin Film Coatings, Nov - 2018, Stanko R. Brankovic |
| Is it time to Revisit your Plastic Metallization Process?, Nov - 2018, David Wayness |
| Electro-codeposition of MCrAlY Coatings for Advanced Gas Turbine Applications, Dec - 2018, Ying Zhang |
| Technology Advancements for Select Key Hard Chromium Applications, Dec - 2018, Ron Cucuro |
| The 54th William Blum Lecture, Innovative Applications
of Electroplating and PVD for New Material Solutions, Jun - 2018, Dr. Per Møller |
| Calculating Applied Media Force during Vibratory Finishing, Jan - 2017, William P. Nebiolo |
| Crack Formation during Electrodeposition and Post-deposition Aging of Thin Film Coatings, Jan - 2017, Prof. Stanko R. Brankovic |
| Latest Developments in Mass Finishing, Feb - 2017, Bernhard Kerschbaum |
| Electrodeposition of Ni-Fe-Mo-W Alloys, Feb - 2017, Yujia Zhang and Prof. E.J. Podlaha-Murphy |
| The Elimination of Whiskers from Electroplated Tin, Mar - 2017, Masanobu Tsujimoto, Shigeo Hashimoto, Masayuki Kiso,
Raihei Ikumoto,Toshikazu Kano and Genki Kanamori |
| The Plater and Pollution, Mar - 2017, Joseph B. Kushner |
| Iron Tungsten Alloy Plating with Low Friction and Wear Resistance, Apr - 2017, Kiyohiko Watabe |
| Research and Decorative Coatings, Apr - 2017, Burton B. Knapp |
| Technical Communication, Apr - 2017, Frederick B. Lowenheim |
| Electrodeposition of Ni-Fe-Mo-W Alloys, May - 2017, Yujia Zhang and Prof. E.J. Podlaha-Murphy |
| Crack Formation during Electrodeposition and Post-deposition Aging of Thin Film Coatings, May - 2017, Prof. Stanko R. Brankovic |
| Electrodeposition of Ni-Fe-Mo-W Alloys, Oct - 2016, Ahn Phong Tran and Prof. E.J. Podlaha-Murphy |
| Electrodeposition and Government Laboratories, Oct - 2016, Fielding Ogburn |
| Electrodeposition of Ni-Fe-Mo-W Alloys, Nov - 2016, Yujia Zhang and Prof. E.J. Podlaha-Murphy |
| Crack Formation during Electrodeposition and Post-deposition Aging of Thin Film Coatings, Nov - 2016, Prof. Stanko R. Brankovic |
| Low Temperature Curing of Hydrogen Silsesquioxane Surface Coatings for Corrosion Protection of Aluminum, Jan - 2016, Felix Lampert |
| The Characterization of the Stannous Chloride/ Palladium Chloride Catalysts for Electroless Plating, Jan - 2016, E. Matijevi? |
| Simultaneous Thickness and Electrochemical Potential Determination of Individual Layers in Multilayer Nickel Deposits, Feb - 2016, Edward P. Harbulak |
| Electrodeposition of Ni-Fe-Mo-W Alloys, Dec - 2016, Yujia Zhang and Prof. E.J. Podlaha-Murphy |
| Crack Formation during Electrodeposition and Post-deposition Aging of Thin Film Coatings, Dec - 2016, Prof. Stanko R. Brankovic |
| Application of Dynamic Impedance Measurements for Adsorbed Plating Additives, Feb - 2016, J.C. Farmer |
| Electrochemical Assessment of Sn-Pb Solderability, Mar - 2016, D.M. Tench |
| Thin Multilayer Palladium Coatings for Semiconductor Packaging Applications Part I: Solderability, Mar - 2016, I.V. Kadija |
| The 53rd William Blum Lecture, Additive Manufacturing and Surface Finishing, - 2016, Dr. Melissa Klingenberg |
| Identifying New Alternatives for Hard Chromium Plating, Jan - 2015, Per Møller |
| Methods and Formulas to Determine Internal Deposit Stress in Applied Metallic Coatings, Feb - 2015, Frank Leaman |
| Manufacturing of Electrocatalytic Material for Large Scale Hydrogen Production by the Combination of Electroplating, PVD, Thermochemical Diffusion and Leaching Processes, Mar - 2015, Cecilía Kjartansdóttír |
| Electrodeposition of Ni-Fe-Mo-W Alloys, Apr - 2015, Prof. E.J. Podlaha-Murphy |
| The Rotating Cylinder Hull Cell: Design and Application, Apr - 2015, C. Madore |
| Nanoscale Characterization of Thin Immersion Silver Coatings on Copper Substrates, May - 2015, |
| The 2nd William Blum Lecture – Faraday’s Law Applied to Cleaning, May - 2015, Dr. A. Kenneth Graham |
| Electroless Nickel-plated Steel versus Stainless Steel: Case Studies, Jun - 2015, Lloyd Ploof |
| The 3rd William Blum Lecture - The Challenge Before Us, Jun - 2015, Dr. Charles L. Faust |
| Electrodeposition of Ni-Fe-Mo-W Alloys, Jul - 2015, Prof. E.J. Podlaha-Murphy |
| The 6th William Blum Lecture – Some Engineering Aspects of Electrodeposition, Jul - 2015, |
| Electrodeposition of Ni-Fe-Mo-W Alloys, Aug - 2015, Prof. E.J. Podlaha-Murphy |
| The 8th William Blum Lecture – Mechanism of the Plating Process, Aug - 2015, Dr. Henry B. Linford |
| The 10th William Blum Lecture - The Nucleation Dependent Growth Layer: A Structure Element in Electrocrystallization, Sep - 2015, Prof. Dr. Hellmuth Fischer |
| The 11th William Blum Lecture - Some Contributions of U.S. Supply Houses to Plating Science and Technology, Oct - 2015, Arthur H. DuRose |
| The Study of Copper Anodes in Acid and Cyanide Plating Baths, Nov - 2015, Charles L. Faust |
| The Adhesion of Electrodeposits to Plastics, Nov - 2015, Edward B. Saubestre |
| The Behavior of Intermetallic Compounds in Aluminum during Sulfuric Acid Anodizing Part 1: Al-Mn, Al-Fe, Al-Mg2Si, Al-Cr Alloys, Dec - 2015, J. Cote |
| The Behavior of Intermetallic Compounds in Aluminum during Sulfuric Acid Anodizing Part 2: Al-Cu, Al-Mg, Al-Si, Al-Ti, Al-Fe-Si, Al-Zn-Mg Alloys, Dec - 2015, J. Cote |
| The 52nd William Blum Lecture, Nickel: Science, Health and the Future, - 2015, Dr. Hudson Bates |
| Selective Brush Plating a Tin-Zinc Alloy for Sacrificial Corrosion Protection, Jan - 2014, Zhimin Zhong |
| Electrodeposition of Ni-Fe-Mo-W Alloys, Jan - 2014, Prof. E.J. Podlaha-Murphy |
| Evaluation of Atmospheric Corrosion on Electroplated Zinc and Zinc-Nickel Coatings by Electrical Resistance (ER) Monitoring, Feb - 2014, P. Møller |
| The 29th William Blum Lecture - The Tribology of Contact Finishes for Electronic Connectors Part I: Mechanisms of Friction and Wear, Feb - 2014, Dr. Morton Antler |
| NOx Scrubbing Technology Breakthrough, Mar - 2014, Robert Richardson Ph.D. |
| The 29th William Blum Lecture - The Tribology of Contact Finishes for Electronic Connectors Part II: The Effects of Underplate, Topography and Lubrication, Mar - 2014, Dr. Morton Antler |
| The Electroless Deposition of Nickel-Phosphorus-Tungsten Alloys, Apr - 2014, Vijaykumar Ijeri |
| A New Sacrificial Corrosion Protection Mechanism for High Performance Zinc/Aluminum Flake Coating Systems and Applications, May - 2014, Shusaku “Shu” Ishikawa |
| Chemical Milling Environmental Improvements, Aerospace is Green and Growing, Jun - 2014, David Tomlinson |
| Greener Hard Chromium Plating, Jul - 2014, Neil Patton |
| Chromium-free Etching and Palladium-free Plating of Plastics, Sep - 2014, Vijaykumar Ijeri |
| The Elimination of Whiskers from Electroplated Tin, Sep - 2014, Masanobu Tsujimoto |
| A Comparative Study of Gamma-Phase Zinc-Nickel Deposits Electroplated from Various Alkaline and Acid Systems, Oct - 2014, Tony Oriti |
| Electrodeposition of Ni-Fe-Mo-W Alloys, Nov - 2014, Prof. E.J. Podlaha-Murphy |
| Aluminum Surface Finishing Corrosion Causes and Troubleshooting, Dec - 2014, W. John Fullen |
| The 51st William Blum Lecture, Surface Finishing Sustainability: Technology Pathways, - 2014, Prof. Yinlun Huang |
| Functional Trivalent Chromium Electroplating of Internal Diameters, Jan - 2013, Burhanuddin Kagajwala |
| A Retrospective View of Nickel Plating, Jan - 2013, W. Wallace Sellers |
| Impact of REACH Regulation on the Global Finishing Market, Feb - 2013, Lionel Thiery |
| Development of Life Prediction Models for High Strength Steel in a Hydrogen Emitting Environment, Mar - 2013, Scott M. Grendahl |
| A Look at Early Advertising in the Surface Finishing Industry, Mar - 2013, James H. Lindsay |
| The 50th William Blum Lecture - Hexavalent Chromium What Else?, Apr - 2013, Patrick Benaben |
| Experimental Study on the Formation of Electroless Nickel-Boron Coatings from a Borohydride-Reduced Bath on Mild Steel, Apr - 2013, Véronique Vitry |
| Method for Comparison of Leveling in Decorative Acid Copper Plating, May - 2013, George S. Bokisa |
| The First AES Scientific Achievement Award - Education and the Electroplating Industry, May - 2013, Dr. William Blum |
| White Bronze, Copper-Tin-Zinc Tri-metal: Expanding Applications and New Developments in a Changing Landscape, Jun - 2013, Richard E DePoto |
| Are Ionic Liquids the Future of the Surface Treatment?, Aug - 2013, Patrick Benaben |
| Cyanide-Free Electroplating of Cu-Sn Alloys, Sep - 2013, Uwe Manz |
| Corrosion Resistance of High Phosphorus Electroless Nickel with a Lower Coefficient of Friction, Nanoparticle Codeposition Electroless Nickel Layer, Oct - 2013, Nicole Micyus |
| Electrodeposition of Ni-Fe-Mo-W Alloys, Oct - 2013, Prof. E.J. Podlaha-Murphy |
| Considerations Regarding the Proper Loading of Vibratory Finishing Bowls for Optimal Quality, Performance and Throughput Efficiency, Nov - 2013, William P. Nebiolo |
| Electrodeposition of Ni-Fe-Mo-W Alloys, Nov - 2013, Prof. E.J. Podlaha-Murphy |
| The 51st William Blum Lecture - Alloy Plating by Heating Stacked Single Layers and the Possibility of its Application in the Future, Dec - 2013, Hideyuki Kanematsu |
| Electroplated Tin-Nickel Coatings as a Replacement for Nickel to Eliminate Nickel Dermatitis, Dec - 2013, P. Møller |
| The 50th William Blum Lecture, Alloy Plating by Heating Stacked Single Layers and the Possibility of its Application in the Future, - 2013, Hideyuki Kanematsu |
| The 21st William Blum Lecture - Opportunism!, Jan - 2012, William H. Safranek |
| Estimating the Total Solids Burden during the Waste Water Treatment of Vibratory Finishing Effluents, Jan - 2012, William P. Nebiolo |
| Shot Peened Surface Characterization Using 3D Metrology, Jan - 2012, Craig Leising |
| Characterization of Electroless Deposition of Ni-P-Al2O3 and Ni-P-TiO2 from Alkaline Hypophosphite Baths in the Presence of Gluconate as a Complexing Agent, Feb - 2012, M.S. Ali Eltoum |
| Stripping Metallic Coatings, Feb - 2012, Frank Altmayer |
| The 23rd William Blum Lecture – Material Science of Electrodeposits, Mar - 2012, Dr. Rolf Weil |
| Growth of ZnO Nanorod Arrays on Flexible PDMS Substrates, Mar - 2012, Yi Chen |
| Plating’s Heyday, Apr - 2012, James H. Lindsay, Jr. |
| Electroplating of Zinc-Base Die Castings in a System Incorporating Dual Chromium, Apr - 2012, James H. Lindsay |
| The Mobile and Static Exposure of Decorative Nickel-Chromium Deposits, Apr - 2012, D.R. Millage |
| Corrosion-Current Data for Nickel-Chromium Couples, Apr - 2012, W.H. Safranek |
| Masking for Surface Finishing, May - 2012, Frank Altmayer |
| The Leading Edge Guide to Top Quality Anodizing using the Complete Spectrum Approach with a Universal Type I – II – III – (123) Mixed Electrolyte, Jun - 2012, Fred Charles Schaedel |
| A New Corrosion Protection System for Zinc and Zinc-Alloy Surfaces, Aug - 2012, |
| Automotive Decorative Plating: A Photo Portfolio of the First Golden Age of Surface Finishing, Aug - 2012, James H. Lindsay |
| Electrodeposition of Nanocrystalline Cobalt-Phosphorus Coatings as a Hard Chromium Alternative for Use in DoD Acquisition Programs, Sep - 2012, R.A. Prado |
| Nickel Deposition from a Watts Bath Containing Monosodium Glutamate, Sep - 2012, Magdy A.M. Ibrahim |
| Electrochemical Cell Geometry for Uniform Processing of Printed Circuit Boards, Oct - 2012, S.T. Snyder |
| Plating Bath Parameters Affecting the Performance of Zinc-Nickel Alloys for Post-Plate Fabrication, Nov - 2012, Leonard L. Diaddario, Jr. |
| Non-chromated Conversion Coating for Magnesium Alloys and Zinc-Nickel Plated Steel, Dec - 2012, Alp Manavbasi |
| History of Chromium Plating, Dec - 2012, George Dubpernell |
| New Developments in Corrosion Testing: Theory, Methods and Standards, Jan - 2011, K. Wojczykowski |
| An Overview of Hard Chromium Plating Using Trivalent Chromium Solutions, Jan - 2011, Patrick Benaben |
| Investigation of the Blackening Process of Electroless Nickel-Phosphorous Coatings and Their Properties, Jan - 2011, D. Beckett |
| Cr(III) Conversion Layers on Zinc and Zinc Alloys: Evolution and Perspectives, Feb - 2011, L. Theiry |
| Non-PFOS, Permanent Mist Suppressants for Hard Chromium Plating, Decorative Chromium Plating and Chromic Etch Applications, Feb - 2011, Neil Patton |
| Final Report AESF Research Project #R-116 Development of Ni-Based High Wear Resistance Composite Coatings, Feb - 2011, Branko N. Popov |
| Corrosion Resistance Mechanism of a Chromium-Free Zinc-Flake Coating Film on Scratched Areas, Jun - 2011, Masayuki Iijima |
| Cobalt-Free Technology for Trivalent Chromates on Zinc Plating, Jun - 2011, Rick Holland |
| Pollution Control and the Plating Industry, Jun - 2011, Kenneth R. Coulter |
| Validation of New Generation Tooling Concept for Electroplating of Copper on Printed Circuit Boards, Jul - 2011, Juergen Fischer |
| Membrane Technology by Electroplating Processes, Jul - 2011, Alexander Jiménez |
| A Protective Decorative Electrolytic Coloring Process for Aluminum, Jul - 2011, M. Reda Gad Abu El-Magd |
| Improvement of Corrosion Resistance of Magnesium by Anodizing in Alkaline Electrolytes, Aug - 2011, A. Manavbasi |
| Increasing Vibratory Efficiency by Optimizing the Choice of Media Shape Relative to Part Geometry, Aug - 2011, William P. Nebiolo |
| Effect of Surface Texturing on the Stretchability of Electrogalvanized Steel Sheets, Aug - 2011, Erfan Abbasi |
| A Quantitative Test for Determining the Bond Strength between an Electroplated Coating and the Basis Metal, Sep - 2011, V.V. Artamonov |
| Electrodeposition of Zinc Films from Environmentally-Friendly Gluconate Salt Solutions, Sep - 2011, S.S. Abd El Rehim |
| Investigation of Tin Whisker Formation, Sep - 2011, Grazyna Koziol |
| E-coating Simulation, Oct - 2011, Robrecht Belis |
| A Pulse/Pulse Reverse Electrolytic Approach to Electropolishing and Through-Mask Electroetching, Oct - 2011, E.J. Taylor |
| Materials and Coatings Development: From Bench Scale to Application, Nov - 2011, A. Lozano-Morales |
| Ionic Liquid [BMPy]Br as an Effective Additive During Zinc Electrodeposition from an Aqueous Sulfate Bath, Nov - 2011, Magdy A.M. Ibrahim |
| Electrodeposition and Characterization of Nickel–Titania Nanocomposite Coatings from Gluconate Baths, Nov - 2011, M.S. Ali Eltoum |
| Cobalt-Free Zinc and Zinc-Alloy Passivation, Dec - 2011, C. Werner |
| Electroless Nickel Duplex Coatings Using RoHS-Compliant Systems, Dec - 2011, Deepali Kozarekar |
| Gold-Iron High Speed Electrolytes: An Effective Alternative to Cobalt and Nickel Hard Gold Electrolytes, Dec - 2011, Olaf Kurtz |
| The 49th William Blum Lecture, Hexavalent Chromium What Else?, - 2011, Dr. Patrick Benaben |
| Advice & Counsel, Jan - 2010, Frank Altmayer |
| Fact or Fiction?, Jan - 2010, Jack W. Dini |
| A Double Dose of Dini, Jan - 2010, Jack W. Dini |
| Finishers$#39, Think Tank, Jan - 2010, Stephen F. Rudy, CEF |
| A New Model for the Formation of Anodic Coatings on Aluminum, Jan - 2010, Arthur W. Brace |
| Direct Plating of Magnesium with Electroless Nickel, Jan - 2010, Rich Bellemare |
| The Characteristics of an Electroless Nickel/Immersion Gold Plated PWB Surface Finish and the Quality of BGA Solder Joints, Jan - 2010, Grazyna Koziol |
| Advice & Counsel, Mar - 2010, Frank Altmayer |
| Fact or Fiction?, Mar - 2010, Jack W. Dini |
| Finisher's Think Tank, Mar - 2010, Stephen F. Rudy, CEF |
| The Plating Industry in World War II Part 1: The Winds of War, Mar - 2010, James H. Lindsay |
| Investigations into the Performance of Multi-layer Nickel Coatings in Both CASS and Exhaust Gas Corrosion Testing, Mar - 2010, Mike Barnstead |
| Sputter-Seeded Activation of Electroless Nickel on Composite Alloys, Mar - 2010, Leonard Nanis |
| Electroless Plating on Plastic Induced by Selective Laser Activation, Mar - 2010, Y. Zhang |
| The Plating Industry in World War II Part 2: After Pearl Harbor and Beyond, Apr - 2010, James H. Lindsay |
| Do's & Don'ts, Apr - 2010, Donald W. Baudrand |
| Fact or Fiction?, Apr - 2010, Jack W. Dini |
| Advice & Counsel, Apr - 2010, Frank Altmayer |
| Finisher's Think Tank, Apr - 2010, Stephen F. Rudy, CEF |
| Platinum Plating for Turbine Blades: Technology Development and Process Improvement, Apr - 2010, Stewart J. Hemsley |
| Developments in Ternary Electroless Nickel Deposits, Apr - 2010, Duncan Beckett |
| Metallizing of Plastics with Virtually Hexavalent Chromium-Free Etch Solutions, Apr - 2010, Andreas Fath |
| The Plating Industry in World War II Part 3: The Road to Victory, May - 2010, James H. Lindsay |
| Fact or Fiction?, May - 2010, Jack W. Dini |
| Advice & Counsel, May - 2010, Frank Altmayer |
| Finishers' Think Tank, May - 2010, Stephen F. Rudy, CEF |
| Characterization of NAVAIR Trivalent Chromium Process (TCP) Coatings and Solutions, May - 2010, Aparna Iyer |
| Codeposition of Amorphous Nickel-Chromium (Nichrome) Thin Film Alloys from Complexing Cr(III) Formate-Glycine Baths, May - 2010, Magdy A.M. Ibrahim |
| Nanocrystalline Ni-W Alloy Coating for Engineering Applications, May - 2010, A.R.Jones |
| Advice & Counsel, Junl - 2010, Frank Altmayer |
| Fact or Fiction?, Jun - 2010, Jack W. Dini |
| Finishers' Think Tank, Jun - 2010, Stephen F. Rudy, CEF |
| Did China Invent Chromium Plating Over 2200 Years Ago?, Junl - 2010, Jack W. Dini |
| Electroplating of Cd-Ni Alloy from Gluconate Baths, Jun - 2010, E. A. Abd El Megui |
| Recent Developments in the Field of Aluminum Deposition Using Ionic Liquids, Jun - 2010, A. Alemany |
| Zincate Free Plating of Beryllium, Magnesium, Aluminum and Their Alloys, Jun - 2010, John W. Bibber |
| Advice & Counsel, Aug - 2010, Frank Altmayer |
| Fact or Fiction?, Aug - 2010, Jack W. Dini |
| Finishers' Think Tank, Aug - 2010, Stephen F. Rudy, CEF |
| Investigation of the Stability of Cobalt-Iron Electrodeposition Solutions Containing Di-Ammonium Citrate, Aug - 2010, B. Crozier |
| Brush Plating a Metal Matrix Composite: Cobalt - Chromium Carbide, Aug - 2010, Haiming Xiao |
| High Speed Bulk Plating for 50 to 500 Kilogram Loads, Aug - 2010, Juergen Fischer |
| Walking the Line. You Know You're In Trouble When …, Sep - 2010, Ralph V. Dixon |
| Finisher's Think Tank, Sep - 2010, Stephen F. Rudy, CEF |
| Advice & Counsel, Sep - 2010, Frank Altmayer |
| Do's & Don'ts, Sep - 2010, Donald W. Baudrand |
| Fact or Fiction?, Sep - 2010, Jack W. Dini |
| Progress in Deposition of Wear and Corrosion-Resistant Composite Alloys, Sep - 2010, Leonard Nanis |
| Electrodeposition of Zn-Cd Binary Alloy Films from Gluconate Salt Solutions, Sep - 2010, E. A. Abd El Meguiim |
| Next Generation Tooling Concept for Pattern Electroplating, Sep - 2010, Bart Van den Bosschen |
| Voluntary Protection Programs (VPP) for the Metal Finisher, Oct - 2010, Fred Mueller, CEF |
| Finisher's Think Tank, Oct - 2010, Stephen F. Rudy, CEF |
| Advice & Counsel, Oct - 2010, Frank Altmayer |
| Fact or Fiction?, Oct - 2010, Jack W. Dini |
| America’s Most Wanted: Skilled Workers, Oct - 2010, Gerald Shankel |
| HPLC Study on Copper Plating Chemistry, Oct - 2010, Haiyan Zhang |
| Surface Finishing on the Pivot Orifice of an Artificial Heart Valve Ring, Oct - 2010, Hengquan Liu |
| An Investigation of the Effect of Nile Blue on the Electrodeposition of Nickel on Brass From a Watts Type Bath, Oct - 2010, P. Gondolias |
| Advice & Counsel, Nov Dec - 2010, Frank Altmayer |
| Fact or Fiction?, Nov Dec - 2010, Jack W. Dini |
| Do's & Don'ts, Nov Dec - 2010, Donald W. Baudrand |
| Finisher's Think Tank, Nov Dec - 2010, Stephen F. Rudy, CEF |
| Tanks and Liners: Is Conventional Wisdom or Reliance on Internet-Based Answers Putting your Company at Risk?, Nov Dec - 2010, Curtis Goad, CEF |
| Electroplating: An Alternative for Producing Low Magnetic Loss Amorphous Alloys, Nov Dec - 2010, R. Lacasse |
| Validation of New Generation Tooling Concept for Electroplating of Copper on Printed Circuit Boards, Nov Dec - 2010, Gert Nelissen |
| Functional Trivalent Chromium Electroplating, Nov Dec - 2010, T.D. Hall |
| The 48th William Blum Lecture, Decorative Electroplating: Theory to Explain Rapid Corrosion Due to Calcium Chloride ‘Russian Mud’, - 2010, Dr. Donald Snyder |
| Washington Update--Hope at the Inaugural, but Deficits, Regulations Ahead in 2009, Jan - 2009, Christian Richter & Jeff Hannapel |
| Finishers' Think Tank---Considerations for Heating Requirements, Jan - 2009, Stephen F. Rudy, CEF |
| Advice & Counsel--Keys to the Exam, Jan - 2009, Frank Altmayer, MSF |
| Fact or Fiction?--Creation of Life through Electricity, Jan - 2009, Jack W. Dini |
| Electrodeposited Nickel-Phosphorus, Jan - 2009, Darell E. Engelhaupt |
| Thick Coating of 316L Stainless Steel on Carbon Steel Using a High Power Fiber Laser: An Experimental Investigation of the Process Characteristics and Materials Properties, Jan - 2009, M.Z. Huq, D. Larson, J. Rindt and D.B. Mitton |
| Washington Update--Attend the NASF Washington Forum – Send a Message on “Card Check” Legislation, Mar - 2009, Christian Richter & Jeff Hannapel |
| The AESF Centennial One Hundred Years of Technical Education in Surface Finishing, Mar - 2009, |
| Finishers' Think Tank---Diffusing the Confusion in Terminology, Mar - 2009, Stephen F. Rudy, CEF |
| Advice & Counsel--100 Years of Training, Mar - 2009, Frank Altmayer, MSF |
| Fact or Fiction?--Poor Judgment (Lies?) by Environmental Groups, Mar - 2009, Jack W. Dini |
| Medical Applications of Radioactive Isotopes through Electroplating / Electrodeposition Techniques, Mar - 2009, Huixiong John Zhang, Shan Gao and Lei Sun |
| Advice & Counsel, Jan - 2009, Frank Altmayer |
| Fact or Fiction?, Jan Feb - 2009, Jack W. Dini |
| The Hull cell for Decorative Electroplating, Jan Feb - 2009, Ralph Dixon |
| Electrodeposited Nickel-Phosphorus, Jan Feb - 2009, Darell E. Engelhaupt |
| Finishers' Think Tank, Mar - 2009, Stephen F. Rudy, CEF |
| Advice & Counsel, Mar - 2009, Frank Altmayer |
| Fact or Fiction?, Mar - 2009, Jack W. Dini |
| Medical Applications of Radioactive Isotopes through Electroplating / Electrodeposition Techniques, Mar - 2009, Huixiong John Zhang |
| Best Practices, Jun - 2009, Peter Gallerani |
| Electroplating of Au-Ni and Au-Co Alloy Films, Jun - 2009, A. He |
| Effect of Phosphorus on the Hardness Temperature Resistance of Nanostructured Ni-W Electrodeposited Coatings, Jun - 2009, M J.L. Gines |
| Highly Corrosion Resistant Environmentally-Friendly Chromium Plating, Jun - 2009, Dr. Toru Murakami |
| Advice & Counsel, Jul - 2009, Frank Altmayer |
| Fact or Fiction?, Jul - 2009, Jack W. Dini |
| Finisher's Think Tank, Jul Aug - 2009, Stephen F. Rudy, CEF |
| Best Practices, Jul - 2009, Peter Gallerani |
| Do's & Don'ts, Jul - 2009, Donald W. Baudrand |
| Developments in Electroplating of Palladium and its Alloys, Jul - 2009, Stewart J. Hemsley |
| A New Pretreatment Cycle for Plating Magnesium Alloys, Jul - 2009, George Shahin |
| Effect of the Oxide Layer at the Coating/Substrate Interface on Plating Adhesion, Jul - 2009, S.B. Feng |
| Advice & Counsel, Sep - 2009, Frank Altmayer |
| Fact or Fiction?, Sep - 2009, Jack W. Dini |
| Do's & Don'ts, Sep - 2009, Donald W. Baudrand |
| A Double Dose of Dini, Sep - 2009, Jack W. Dini |
| Finisher's Think Tank, Sep - 2009, Stephen F. Rudy, CEF |
| Best Practices, Sep - 2009, Peter Gallerani |
| Advances in Selective Plating: Deposition on Titanium Alloys, Sep - 2009, Darrin Radatz |
| Dynamic Model of Wastewater Treatment for a Chromium Plating Process, Sep - 2009, N. Mbongw |
| Plated Metals and Alloys of Color, Sep - 2009, Ralph Dixon |
| The Role of Electroless Nickel in Multi-Chip Module (MCM-C) Fabrication, Mar - 2009, Donald W. Baudrand |
| Investigation of PVD-DLC Thin Films Manufactured Using HIPIMS Etch / Unbalanced Magnetron Sputter (UBM) Deposition and Secondary Mechano-Chemical Modification, Mar - 2009, L.A. Donohue |
| Advice & Counsel, Apr - 2009, Frank Altmayer |
| Fact or Fiction?, Apr - 2009, Jack W. Dini |
| Finisher's Think Tank, Apr - 2009, Stephen F. Rudy, CEF |
| Palladium-Nickel Alloys Electrodeposited from Chloride-Free Electrolytes, Apr - 2009, Olaf Kurtz |
| Optimization of Cu Seed Deposition from Organic Solution on TaSiN Barrier Layers Using Design of Experiment (DOE) Methods, Apr - 2009, Jingye Li |
| Trivalent Chromium for Enhanced Corrosion Protection on Aluminum Surfaces, Apr - 2009, Harish Bhatt |
| Fact or Fiction?, May - 2009, Jack W. Dini |
| Advice & Counsel, May - 2009, Frank Altmayer |
| A Double Dose of Dini, May - 2009, Jack W. Dini |
| Finisher's Think Tank, May - 2009, Stephen F. Rudy, CEF |
| Nickel Plated Invar-36 Alloy for Carbon Fiber Composite Molding Tools, May - 2009, C.S. Wang |
| Design for Plateability Analysis for the Decorative Chromium Plating Process for a Fog Lamp Bezel Part, May - 2009, B. Van den Bossche |
| Performance Characteristics of Zinc-Nickel Alloys and Dip Spin Coatings for Fastener Applications, May - 2009, Toshiaki Murai |
| Advice & Counsel, Jun - 2009, Frank Altmayer |
| Fact or Fiction?, Jun - 2009, Jack W. Dini |
| Finisher's Think Tank, Jun - 2009, Stephen F. Rudy, CEF |
| Do's & Don'ts, Jun - 2009, Donald W. Baudrand |
| Finisher's Think Tank, Oct - 2009, Stephen F. Rudy, CEF |
| Advice & Counsel, Oct - 2009, Frank Altmayer |
| Fact or Fiction?, Oct - 2009, Jack W. Dini |
| Do's & Don'ts, Oct - 2009, Donald W. Baudrand |
| Best Practices, Oct - 2009, Peter Gallerani |
| The 47th William Blum Lecture - Nickel and Surface Finishing: a Glorious Past – an Uncertain Future, Oct - 2009, Eric W. Brooman, Ph.D., AESF Fellow |
| Maximizing Decorative Electroplating Productivity by Optimizing the Rack Design for a Family of Ten Different Door Handles, Oct - 2009, Bart van Den Bossche |
| Niobium Electropolishing Using an HF-free Electrolyte, Oct - 2009, A. Lozano-Moralean |
| Manufacturer Simplifies Daily Electroforming Process Operatio with Automated Instrumentation to Monitor and Control Critical pH Levels of Metal Solution Bath, Nov - 2009, Andrew Heisler |
| Jessup Engineering meets 21st Century Challenges to the Surface Finishing Industry, Nov - 2009, James H. Lindsay |
| Advice & Counsel, Nov - 2009, Frank Altmayer |
| Fact or Fiction?, Nov - 2009, Jack W. Dini |
| Enhancing the Bottom Line Best practices in reducing workers’ compensation cost, Nov - 2009, Editor |
| Finisher's Think Tank, Nov - 2009, Stephen F. Rudy, CEF |
| Anodic Coating Formation on Aluminum without a “Barrier Layer”, Nov - 2009, Arthur W. Brace |
| Advancement in PTFE Dispersions for Electroless Nickel Codeposition, Nov - 2009, Nicole Micyus |
| Surface Cleaning with Laser Technology, Nov - 2009, Georg Heidelmann |
| Advice & Counsel, Dec - 2009, Frank Altmayer |
| Fact or Fiction?, Dec - 2009, Jack W. Dini |
| A Double Dose of Dini, Dec - 2009, Jack W. Dini |
| Do's & Don'ts, Dec - 2009, Donald W. Baudrand |
| Finisher's Think Tank, Dec - 2009, Stephen F. Rudy, CEF |
| Characterization of a Zinc/Nickel Plating Bath, Dec - 2009, Paulo Vieira |
| Comparison of Micro Arc Oxidation and Friction Stir Processed Coatings on Aluminum Alloys, Dec - 2009, Sudhir Baral |
| Zinc-Nickel (Zn / 12-15% Ni) Alloy Process: Features for High Performance and Economic Process Control, Dec - 2009, Andreas Smie |
| The 47th William Blum Lecture, Nickel and Surface Finishing: A Glorious Past - an Uncertain Future, - 2009, Dr. Eric W. Brooman |
| Palm Goes Green , Jan - 2008, Jim Destefani |
| Ultra-Beneficial , Jan - 2008, Renee Beall |
| Safe Surface Treatment , Jan - 2008, Jim Destefani |
| Tradin' Paint, Feb - 2008, Jim Destefani |
| ‘Non-Traditional' Goes Mainstream, Feb - 2008, Ray Dargis |
| Golden Alternative , Feb - 2008, Eric Olander |
| Flexible Thickness Measurement , Feb - 2008, Jim Destefani |
| New Finishing Technologies Taking Off , Mar - 2008, Keith O. Legg |
| Slowing the Pulse , Mar - 2008, Anne Deacon Juhl and Kirsten Burfelt |
| Standardization and Simulation , Mar - 2008, Jim Destefani |
| French Revolution , Apr - 2008, Roger Talbert |
| Designer EN , Apr - 2008, Rich Bellemare |
| Leaner and Greener , Apr - 2008, Jimd Destefani |
| Tech Notes: Autodeposition Update , Apr - 2008, Jim Destefani |
| Pumping Up Paint Productivity , May - 2008, Mark A. Freels |
| Stronger Than Dirt , May - 2008, Pauline Paul |
| From Lab to Production , May - 2008, Jim Destefani |
| Ramping Up PVD , May - 2008, Jim Destefani |
| Prevention and control of exposure to chromic acid , - 2008, Health and Safety Executive |
| Prevention of Exposure and Control of Chromic Acid Mist , - 2008, Health and Safety Executive |
| Health Surveillance for Hexavalent Chromium Compounds , - 2008, Health and Safety Executive |
| Monitoring for electrolytic hexavalent chromium processes , - 2008, Health and Safety Executive |
| Nickel and Nickel Alloy Plating Operations: Controlling the Risk of Inhaling Mist Containing Nickel, - 2008, Health and Safety Executive |
| Nickel and Nickel Alloy Plating Operations: Controlling the Risk of Skin Exposure , - 2008, Health and Safety Executive |
| Guidance on the use of trichloroethylene as a vapour degreasing solvent , - 2008, Health and Safety Executive |
| Washington Update -- Is Nickel Really Next?, Jun - 2008, Christian Richter, Jeff Hannapel |
| TOC Key to Bright Nickel Purity, Jun - 2008, Ralph M. Dixon |
| More Challenges for the Industry at the 4th Washington Forum 2008, Jun - 2008, P&SF |
| Advice & Counsel -- That Lump of Coal, Jun - 2008, Frank Altmayer |
| Fact or Fiction? -- Looking for Germs and Cocaine? Check Your Money, Jun - 2008, Jack W. Dini |
| Finishers' Think Tank -- Plate Less . . . Burnish More, Jun - 2008, Stephen F. Rudy |
| Washington Update -- Industry Engages Capitol Hill on Global Issues for Surface Finishing, May - 2008, Christian Richter, Jeff Hannapel |
| Developments in Citric Acid Passivation of Stainless Steel, May - 2008, R. Kremer* |
| BRIGHT DESIGN CHALLENGE 2008 Winners , May - 2008, P&SF |
| Advice & Counsel -- Stain-Less: Part 2, May - 2008, Frank Altmayer |
| Fact or Fiction? -- Volatile Organic Compounds in Foods and Beverages, May - 2008, Jack W. Dini |
| Finishers' Think Tank -- Stripping Organic Coatings: Options, May - 2008, Stephen F. Rudy |
| Washington Update -- New Developments Include Greenhouse Gas Emissions Reporting and OSHA Compliance Guidance, Mar - 2008, Christian Richter, Jeff Hannapel |
| Exterior Decorative Coatings Improvements on Commercial Airplanes, Mar - 2008, Elden Altizer |
| Novel, Effective, Non-toxic Zinc Free Anticorrosive Pigments for Industrial Maintenance Paints, Mar - 2008, Arieh Calahorra |
| Fact or Fiction? -- Cleaner Air, Mar - 2008, Jack W. Dini |
| Finisher's Think Tank -- Electrocleaning Roundup, Mar - 2008, Stephen F. Rudy |
| Advice & Counsel -- Sample Prep for Corrosion Testing, Mar - 2008, Frank Altmayer |
| Dollars & Sense -- The Surface Area of Some Selected Simple Shapes, Mar - 2008, Tom Rochester |
| Variation of Counterelectrode Size to Control Current Distribution in Parallel Plate Cells, Mar - 2008, Alonso Lozano-Morales,Heather McCrabb, E. Jennings Taylor and Alan C. West2 |
| Surface Coating Thickness Distribution in Electrodeposition: A Case Study on Copper Plating of a Tube Inner Surface, Mar - 2008, Xiang Li1, Helen H. Lou1, Jie Xiao and Yinlun Huang |
| Washington Update -- EPA Proposes New Air Emissions Standards for Plating and Polishing Area Sources, Apr - 2008, Christian Richter, Jeff Hannapel |
| The Fundamentals of Surface Engineering by Superfinishing using a Chemically Assisted Vibratory System, Apr - 2008, Jarrod Schell, Benjamin Hoiland,* Damian Wilmot & John Rindt, |
| An Easily Understood Technique for Measuring Vibratory Bowl Speed and Optimizing Vibratory Bowl Processing Efficiency, Apr - 2008, William P. Nebiolo |
| Finishers' Think Tank -- Stainless Steel: Facts & Information, Apr - 2008, Stephen F. Rudy |
| Advice & Counsel -- Stain-Less, Apr - 2008, Frank Altmayer |
| Fact or Fiction? -- Blame it on the Sun?, Apr - 2008, Jack W. Dini |
| Do's & Don'ts -- Corrosion! Oh No! Not Again #*!#!*!#*, Apr - 2008, Donald W. Baudrand |
| The Signifi cance and Determination by Image Analysis of Microcrack Density in Hard Chromium Plating, Apr - 2008, Marcelino Pereira do Nascimento* & Herman Jacobus Cornelis Voorwald |
| New Hexavalent Cr Free Etch for ABS and ABS/PC Electroplated Plastics, Apr - 2008, Walter Sommer, Kai Wang, Neil Brown & Jack McCaskie |
| Washington Update -- Climate Change and New Drinking Water Standard May Be Industry's Next Big Challenges, Feb - 2008, Christian Richter, Jeff Hannapel |
| Effect of Part Design on Injection-Molding and Plating-on-Plastic Processing, Feb - 2008, David M. Rudder |
| A Global Market Survey of Trends and Drivers in Decorative Plating on Plastics, Feb - 2008, Jack McCaskie |
| Fact or Fiction? -- Utopia Questioned, Feb - 2008, Jack W. Dini |
| Do's & Don'ts -- Hot Alkaline Cleaners, Feb - 2008, Donald W. Baudrand |
| Finisher's Think Tank -- Soak Cleaning Roundup, Feb - 2008, |
| Internal Stress of Electroless Nickel Deposits, Feb - 2008, David E. Crotty, Ph.D. & Nicole Micyus |
| Multi-layer Electroplating of Au-Co/188Re-Au on Stents for Lung Cancer Treatment, Feb - 2008, Huixiong John Zhang1* & Urs O. Häfeli2 |
| P&SF Retrospective -- , Feb - 2008, Ronald Kornosky |
| Washington Update -- Selected GR Information for Finishers, Jan - 2008, Christian Richter, Jeff Hannapel |
| Hexavalent Chromium (Cr+6) Reduction at U.S. Air Force Plant 44 in Tucson, Arizona, Jan - 2008, Paul Fecsik, Jim Arthur and Leanne Debias |
| Advice & Counsel -- Coagulation, Electrocoagulation & Flocculation, Jan - 2008, Frank Altmayer |
| Finisher's Think Tank -- Check List: Some Suggestions, Jan - 2008, Stephen F. Rudy |
| Fact or Fiction? -- Analysts Can Find Anything, Jan - 2008, Jack W. Dini |
| Trivalent Yellow Chromate, Jan - 2008, Eric Olander |
| Effect of Strain on the Magnetotransport Properties of Co/Ag Multilayer Films Grown by Pulse Electrochemical Deposition, Jan - 2008, C. S. Rizal, K. Ishida, A. Yamada and Y. Ueda |
| Evaluation of the Effect of Carbonate Concentration in the Electrodeposition of Copper on Mild Steel Coin Blanks, Jan - 2008, Angélica Inês Ferreira da Silva, Júlio Carlos Afonso, Luis Gonzaga Santos Sobral* |
| Replacement of Zinc Phosphating and E-Coating by a One-Step Primer?, Jan - 2008, P. Puomi, W.J. Van Ooij, Z. Yin and A. Seth |
| Washington Update--New New EPA Air Emissions Rule, Nickel Panel at SUR/FIN and EU REACH Guidance, Jul - 2008, Christian Richter and Jeff Hannapel |
| IS TRADITION COSTING YOU CUSTOMERS AND HIGHER REJECTS?, Jul - 2008, Charles Schultz |
| Advice & Counsel--That Lump of Coal - Part 2, Jul - 2008, Frank Altmayer |
| Fact or Fiction?--Superfund Sites Yield New Drugs/Tourist Attractions, Jul - 2008, Jack W. Dini |
| Finishers' Think Tank ‐ Filtration: Keeps Things Out ‐ Gets Things Out, Jul - 2008, Stephen F. Rudy |
| Washington Update--NASF REACH Education Effort – How Can We Help?, Aug - 2008, Christian Richter and Jeff Hannapel |
| REACH-ing Out: NASF is Issuing Key Guidance on the New European Union Chemicals Regulation, Aug - 2008, |
| Advice & Counsel--That Lump of Coal - Part 3, Aug - 2008, Frank Altmayer |
| Fact or Fiction?--Cremation and the Environment, Aug - 2008, Jack W. Dini |
| Finishers' Think Tank--Racks: We Cannot Plate Without Them, Aug - 2008, Stephen F. Rudy |
| Electrodeposition of Sn-0.7 wt% Cu Eutectic Alloys from Chloride-Citrate Solutions, Aug - 2008, Chunfen Han, Qi Liu and Douglas G. Ivey |
| Corrosion Resistance of ELV-compliant Mid- and Low/Mid- Phosphorus Electroless Nickel, Aug - 2008, Nicole Micyus |
| Design and Validation of Conformal Anodes for a Thermal Barrier Coating on a Triple Vane, Aug - 2008, G. Nelissen, B. Van den Bossche, A. Rose and J. Foster |
| Washington Update--EPA Plating and Polishing Area Source Final Rule, Sep - 2008, Christian Richter and Jeff Hannapel |
| What NASF Jobshops Need to Know About Pre-Registering, Sep - 2008, |
| Advice & Counsel--That Lump of Coal - Part 4, Sep - 2008, Frank Altmayer |
| Fact or Fiction?--Unlimited Oil?, Sep - 2008, Jack W. Dini |
| Finishers' Think Tank--Desired Plating Adhesion: Considerations of the Process, Sep - 2008, Stephen F. Rudy |
| Magnesium Repair by Cold Spray, Sep - 2008, Victor K. Champagne, Dr. Dennis Helfritch and Phillip F. Leyman |
| Operational Experience Using an Organically-Stabilized Electroless Nickel, Sep - 2008, Duncan Beckett |
| High-Speed Electroless Nickel - PTFE Plating, Sep - 2008, Michael Feldstein, Thomas Lancsek & Jijeesh Thotathil |
| Washington Update--New EPA Rules May Be Beneficial to the Surface Finishing Industry, Oct - 2008, Christian Richter and Jeff Hannapel |
| Advice & Counsel--That Lump of Coal - Part 5, Oct - 2008, Frank Altmayer |
| Finishers' Think Tank--Take the Chill Out of Winter, Oct - 2008, Stephen F. Rudy |
| Washington Update--New EPA Rules May Be Benefi cial to the Surface Finishing Industry, Oct - 2008, Christian Richter & Jeff Hannapel |
| Advice & Counsel--That Lump of Coal - Part 5, Oct - 2008, Frank Altmayer, MSF |
| Fact or Fiction ‐ Glaciers ‐ Some Melt ‐ Some Don 't, Oct - 2008, Jack W. Dini |
| Finishers' Think Tank--Take the Chill Out of Winter, Oct - 2008, Stephen F. Rudy, CEF |
| Determination of Pyridinium-1-Propane-2- Hydroxide-3-Sulfonate and Saccharin in a Bright Nickel Electroplating Bath, Oct - 2008, Ying Zheng, Canzhu Gao and Rutao Liu |
| Electrochemical Surface Preparation of Passive Metallic Substrates for Electroplating, Oct - 2008, A. Lozano-Morales, A. Bonifas, M. Inman, P. Miller and E.J. Taylor |
| Electronically Monitoring Plating Stress in Real-Time, Oct - 2008, Darell E. Engelhaupt |
| Washington Update--A Peek at What’s Ahead for Finishing in 2009, Dec - 2008, Christian Richter & Jeff Hannapel |
| Advice & Counsel--That Lump of Coal - Part 6, Dec - 2008, Frank Altmayer, MSF |
| Fact or Fiction?--Friendly Bacteria and the Hygiene Hypothesis, Dec - 2008, Jack W. Dini |
| Finishers' Think Tank--Decorative Trichrome: How Goes It?, Dec - 2008, Stephen F. Rudy, CEF |
| Adventures in Pulse/Pulse Reverse Electrolytic Processes: Explorations and Applications in Surface Finishing, Dec - 2008, Dr. E. Jennings Taylor |
| Sonochemical Surface Modifi cation: A Route to Lean, Green and Clean Manufacturing?, Dec - 2008, A.J. Cobley, T.J. Mason and J. Robinson |
| Corrosion Resistance of ELV-compliant Mid- and Low/Mid-Phosphorus Electroless Nickel, Jun - 2008, Nicole Micyus |
| Operational Experience Using an Organically Stabiliser Electroless Nickel, Jun - 2008, Duncan Beckett |
| HIGH SPEED ELECTROLESS NICKEL - PTFE PLATING, Jun - 2008, Michael Feldstein, Thomas Lancsek, Jijeesh Thotathil |
| Electrodeposited Nickel Phosphorus, Jun - 2008, Engelhaupt, Darell E. |
| Sonochemical Surface Modification A route to Lean, Green and Clean Manufacturing?, Jun - 2008, Cobley A J, Mason T J, & Robinson J, |
| Electrochemical Surface Preparation of Passive Metallic Substrates for Electroplating, Jun - 2008, A. Lozano-Morales, A. Bonifas, M. Inman, P. Miller and E.J. Taylor |
| Thick coating of 316L stainless steel on carbon steel using a high power fiber laser: an experimental investigation of the process characteristics and materials properties, Jun - 2008, M. Z. Huq, D. Larson, J. Rindt, D. B. Mitton |
| Investigation of PVD DLC Thin Films Manufactured using HIPIMS Etch / Unbalanced Magnetron Sputter (UBM) Deposition and Secondary Mechano-Chemical Modification., Jun - 2008, L.A.Donohue, A.Torosyan, P.May, J.Kulik, D.E.Wolfe |
| Silver Plating of Solar Wafers in Production, Jun - 2008, Steven Burling |
| PLATING FROM IONIC LIQUIDS JUST A GOOD IDEA OR A CHALLENGE FOR ELECTROPLATING?, Jun - 2008, C. Werner, A. Moebius, A. Koenig, F. Endres, G. Zeng, R. Pittner |
| Practical Process Sequences and Controls for Plating Various Substrates in Rack and Barrel MID Applications, Jun - 2008, John McCaskie, Tim Tubergen, Brandon Du, Vance Kan |
| Cadmium Coating Alternatives for High-Strength Steels - An Update, Jun - 2008, Dr. Elizabeth S. Berman, Mr. Thomas A. Naguy, Mr. Neil Huber, Ms. Leanne Debias |
| Properties of APCVD Aluminum Coatings - an Environmentally Acceptable Replacement for Electroplated Cadmium Coatings, Jun - 2008, Dr. Elizabeth Berman, Dr. Eric Brooman, and Mr. John Kleek, Dr. John Beatty, Prof. Roland Levy and Dr. Sungmin Maeng, Dr. Dennis Deavenport, Dr. Fernando Gómez, and Mr. Sam Newberg, Mr. Stephen Gaydos |
| The Hull Cell For Decorative Electroplating, Jun - 2008, |
| Plateability analysis for the decorative chrome plating process of a fog lamp bezel part, Jun - 2008, P.Vieira, M. Carroll, J. Randazzo, B. Van den Bossche, G. Nelissen, |
| Electronically Monitoring Plating Stress in Real-Time, Jun - 2008, Engelhaupt, Darell E., |
| Nickel Pulse Plating From Acetate-Chloride Bath, Jun - 2008, Sergey S. Krgulikov. Tatiana E. Tsupak, Nadya V. Peganova |
| Bright Tin-Bismuth Sulfate Baths, Jun - 2008, Sergey S. Kruglikov, Lucya V. Kosmodamyanskaya |
| Analyses and Discussion of Human Sensation / Reaction to Glossy Surfaces, Jun - 2008, Hideyuki Kanematsu, Dana M. Barry and Jake Benham |
| Electrochemical Formation of Phosphate Coatings with Superior Corrosion Resistance by Application of Bi-polar (DC+AC) Pulses, Jun - 2008, Mois Aroyo |
| New Non-Chrome Black Conversion Coating for Zinc Electroplated Steel, Jun - 2008, M. Shone, K. Brennan, R. Painter |
| Trivalent Chromium for Enhanced Corrosion Protection on Aluminum Surface, Jun - 2008, Harish Bhatt |
| Coating Systems That Complement and Can Replace Chromates are Based on Zirconia, Jun - 2008, Steven Erwin, Charles E. Tomlinson |
| Effect of P on the hardness temperature resistance of nanostructured Ni-W electrodeposited coatings, Jun - 2008, M J.L. Gines, M. J. Loureiro, F.J. Williams |
| Performance Characteristics of Zinc Nickel Alloys and Dip Spin Coatings for Fastener Applications, Jun - 2008, Toshiaki Murai |
| Nickel Plated Invar-36 Alloy for Carbon Fiber Composite Molding Tools, Jun - 2008, Wang, C. S. and Wang, Yar-Ming |
| Closed-loop Zinc Plating From Chloride Baths, Jun - 2008, Sergey S. Kruglikov, Elena S. Kruglikova, Ksenia V. Kazakova |
| Zinc Nickel (Zn Ni 12 – 15%) Alloy Process: Features for High Performance and Economic Process Control, Jun - 2008, Smie A. |
| Sn-Zn Alloy Films Produced by HSSL And Their Environmental Characteristics, Jun - 2008, Hideyuki Kanematsu, Kazufumi Murata, Akiko Ogawa, Yasuyuki Miyano |
| High Corrosion Resistant Environmentally Friendly Chrome Plating, Jun - 2008, Dr. Toru Murakami |
| Saving And Minimization Of Contaminants By Recovering Cations And Anions And Water Recycling, Jun - 2008, Dr. Xavier Albert Ventura |
| High Corrosion Resistance Mechanism of Chrome-Free Zinc-Rich Paint, Jun - 2008, Masayuki “Mark” Iijima |
| Environmentally Friendly Anticorrosive Primer Based on Oxy-Amino-Phosphate of Magnesia substituting Chemical Pretreatment for Aluminum, Jun - 2008, Arieh Calahorra |
| Formulated Didecyl Dimethyl Ammonium Bicarbonate/Carbonate (DDABC), a Multi-Metal Corrosion Inhibitor with Relevance to Commercial Surface Preparation and Coatings Technologies, Jun - 2008, Dr. Thomas C. Bedard, Dr. T. David Burleigh, Joseph Kimler |
| A new pretreatment cycle for Plating Magnesium Alloys., Jun - 2008, George Shahin C.E.F. |
| Hard Anodizing for Aluminium Pieces -Supporting Friction and Wearing- For the Automotion and Motorcycling Industry (II), Jun - 2008, Dr. Xavier Albert Ventura |
| Realizing New Limits Using Anodic Discharged Surface Activation and Conditioning for Type II (23) and Type III Anodize on All Alloys, Jun - 2008, Fred C. Schaedel |
| BETTER SOLUTION FOR AN OLD PROBLEM UV Curable Masking Resins for Surface Treatment Applications, Jun - 2008, Virginia P. Read |
| Developments in Electroplating of Palladium and its Alloys, Jun - 2008, Stewart J HEMSLEY & Yin Li CHACK |
| The 46th William Blum Lecture, Adventures in Pulse/Pulse Reverse Electrolytic Processes: Explorations and Applications in Surface Finishing, - 2008, Dr. E. Jennings Taylor |
| Awesome Alloy , Jan - 2007, Jim Destefani |
| Three Steps to Lower Energy Use , Jan - 2007, Rick Aquino |
| A Strong Finish , Feb - 2007, Jennifer Creighton |
| Take ‘Em for a Spin , Feb - 2007, Steven R. Alviti |
| Building Blocks of an Aqueous Cleaning Process , Mar - 2007, Chris Swainbank |
| Ultrasonic Cleaning Saves Time, Money , Mar - 2007, Jim Destefani |
| Electroless Nickel: Beyond ELV, Mar - 2007, Mike Barnstead |
| How to Maximize CARC Spraying Efficiency , Mar - 2007, Jim Destefani |
| Robotic Painting , Apr - 2007, Martin D. Rola |
| Better Plating Through Automation , Apr - 2007, Tim Josephs and Chuck Danto |
| Finished Parts Fly High, Apr - 2007, Eugen Holzknecht and Ross Jacobs |
| PC-based Control for Powder , Apr - 2007, Jim Destefani |
| Painting a Mustang , May - 2007, Jim Destefani |
| A New Spin on Electrowinning , May - 2007, Danielle Miousse |
| Bulk E-Coat Has Arrived , May - 2007, Roger Talbert |
| Clean, Economical Electropolishing , May - 2007, Jim Destefani |
| All-Purpose and Environmentally Friendly , May - 2007, Jim Destefani |
| No More Patches , May - 2007, Jim Destefani |
| Smooth Finish , Jun - 2007, Mario Orduz |
| System Synergy , Jun - 2007, Kosta Milojevic |
| Nimet Finds Its Niche , Jun - 2007, Jim Destefani |
| Approaching Zero Discharge , Jul - 2007, Jim Destefani |
| Finishing Transformation, Jul - 2007, Jim Destefani |
| Surface Treatment for Medical Parts , Jul - 2007, Jim Destefani |
| In Pursuit of Precision Blasting , Aug - 2007, J.C. Carson |
| Powder Formulation 101 , Aug - 2007, Dr. Owen Decker and Trena Benson |
| Making Stainless Steel Stainless , Aug - 2007, John H. Magee and Robert K. Mohr |
| High Marks for Markers, Aug - 2007, Jim Destefani |
| Expanding on E-Coat , Sep - 2007, Roger Talbert |
| Risks and Rewards , Sep - 2007, Jim Destefani |
| Improved Corona Guns for Powder , Sep - 2007, Jim Destefani |
| Conveying Luxury in Polished Metal , Oct - 2007, Jim Destefani |
| Nanotechnology in Finishing , Oct - 2007, Jim Destefani |
| Consistent Coating , Oct - 2007, Jim Destefani |
| All the Right Moves , Nov - 2007, Jerry Trostle |
| Silver Keeps Pace, Nov - 2007, Steven Burling and Stewart Hemsley and Jianqiao Hu |
| Lay It On THICK , Nov - 2007, Michael J. Aleskinas |
| 12 Tips for Better EN Operations , Nov - 2007, Kurt R. Weamer |
| Wiping Out Waste , Dec - 2007, Robert Masini |
| Digging in the Dirt , Dec - 2007, Kevin Lockwood |
| Evaluating Coating Options , Dec - 2007, Jim Destefani |
| Nickel: The Stuff of Legends, Dec - 2007, Frank J. Verderber |
| Advice & Counsel--"Measles Outbreak", Dec - 2007, Frank Altmayer, MSF, AESF Fellow |
| Do's & Don't's -- Troubleshooting On Plating on Plastics Revisited, Dec - 2007, Donald W. Baudrand, Consultant |
| Finisher's Think Tank--The Acid Copper Alternative, Dec - 2007, Stephen F. Rudy, CEF |
| Fact or Fiction?--Fearing Frog Deformities: Media and Environmentalists Croaking in the Wind, Dec - 2007, Jack W. Dini |
| Shop Talk--Plating & Surface Finishing Retrospective, Dec - 2007, Originally contributed by Ronald Kornosky; Compiled by Dr. James H. Lindsay, AESF Fellow |
| Fabrication Process for Electroabsorption Modulators, - 2007, Johns, Steven and Bussjager, Rebecca |
| Optical Parametric Oscillation in Orientation-Patterned Gallium Arsenide, - 2007, Shell, Scott A |
| Optical Parametric Oscillation in Orientation-Patterned Gallium Arsenide, - 2007, Shell, Scott A. |
| lead-free and the RoHS legislation , - 2007, Zetex' RoHS compliance |
| Washington Update--Critical Meetings Promoting Industry and International Regulations Impacting Operations Highlight GR Activities, Jan - 2007, Christian Richter & Jeff Hannapel, The Policy Group, Washington, DC |
| Shop Talk--Plating & Surface Finishing Retrospective, Jan - 2007, Originally contributed by Ronald Kornosky; Compiled by Dr. James H. Lindsay, AESF Fellow |
| Advice & Counsel ‐ Die Casting & Plating – Part II, Jan - 2007, Frank Altmayer, MSF, AESF Fellow |
| Finisher's Think Tank--A New Year with More New Challenges, Jan - 2007, Stephen F. Rudy, CEF |
| Emerging Surface Finishing Technologies--Modeling of Facilities, Processes and Products, Jan - 2007, Eric W. Brooman, Ph.D. |
| Fact or Fiction? -- Mercury, Jan - 2007, Jack W. Dini |
| Alternatives to the Hexavalent Chromates: An Evolution of Trivalent Chromate Technologies*, Jan - 2007, William Eckles and Rob Frischauf |
| Metal Finishing Industry Wins Major Concessions in Final Rule as California Air Resources Board Adopts Hexavalent Chromium Air Toxic Control Measure (ATCM), Jan - 2007, Daniel Cunningham, MFASC & STA Executive Director |
| Decorative Trivalent Chromium Plating ‐ The Challenges of Change Facing the Industry, Jan - 2007, Alan Gardner |
| Washington Update--Finishing Facilities Impacted by International and State Regulations, Feb - 2007, Christian Richter & Jeff Hannapel, The Policy Group, Washington, DC |
| Shop Talk--Plating & Surface Finishing Retrospective, Feb - 2007, Originally contributed by Ronald Kornosky; Compiled by Dr. James H. Lindsay, AESF Fellow |
| Advice & Counsel--Is Cadmium Finished?, Feb - 2007, Frank Altmayer, MSF, AESF Fellow |
| Fact or Fiction? -- Fear and Illness, Feb - 2007, Jack W. Dini |
| Do's & Don't's -- Hydrogen Embrittlement from Plating Processes, Feb - 2007, Donald W. Baudrand, Consultant |
| Finisher's Think Tank--The Importance of Surface Preparation, Feb - 2007, Stephen F. Rudy, CEF |
| Practical Selection of Periodic Pulse Reverse Rectifiers, Feb - 2007, Waasy Boddison |
| Will New Union Organizing Laws Rough up the Finishing Industry, Feb - 2007, Woodruff Imberman |
| Washington Update--Congress Kicks off Hearings on US-China Trade, Finishers Focus on Pentagon Priorities for Surface Finishing, Mar - 2007, Christian Richter & Jeff Hannapel, The Policy Group, Washington, DC |
| Advice & Counsel--Is Cadmium Finished? (Continued), Mar - 2007, Frank Altmayer, MSF, AESF Fellow |
| Do's & Don't's -- Plating onto High-strength and Leaded Alloys, Mar - 2007, Donald W. Baudrand, Consultant |
| Fact or Fiction? -- Noise Pollution, Mar - 2007, Jack W. Dini |
| Finisher's Think Tank--Electropolishing: Process Considerations, Mar - 2007, Stephen F. Rudy, CEF |
| Management Corner -- The Benefit of Employee Benefits, Mar - 2007, Paul Bronson |
| Enviolet-UV-Oxidation: A Proven Method for Bright-Nickel Plating Bath Purification, Mar - 2007, Rudy Mathis, Ralph Dixon, Martin Sørensen, Jürgen Weckenmann and Andreas Fath |
| P&SF Retrospective --Based on an original article from the early Finishers Think Tank series [Plating & Surface Finishing, 70 (7), 16 (1983)], Mar - 2007, Originally contributed by Ronald Kornosky; Compiled by Dr. James H. Lindsay, AESF Fellow |
| Washington Update--More Opportunities for Recycling with EPA's New Proposed Waste Defi nition, May - 2007, Christian Richter & Jeff Hannapel, The Policy Group, Washington, DC |
| Shop Talk--Plating & Surface Finishing Retrospective, May - 2007, Originally contributed by Ronald Kornosky; Compiled by Dr. James H. Lindsay, AESF Fellow |
| The Green Machine Metal Finishing – Green Chemistry 2007, May - 2007, Brian Wassell |
| Fact or Fiction? -- Food and Chemical Priorities, May - 2007, Jack W. Dini |
| Advice & Counsel--A Helping Hand, May - 2007, Frank Altmayer, MSF, AESF Fellow |
| Finisher's Think Tank--Troubleshooting Tips & Observations: Surface Preparation, May - 2007, Stephen F. Rudy, CEF |
| Do's & Don't's -- Bright Nickel Plating, May - 2007, Donald W. Baudrand, Consultant |
| Filtration Techniques in Relation to Waste Minimization, May - 2007, Huw Williams |
| Washington Update--NASF "Washington Forum" A Success in 2007, Jun - 2007, Christian Richter & Jeff Hannapel, The Policy Group, Washington, DC |
| Finisher's Think Tank--Time for a Mid Year Tune Up, Jun - 2007, Stephen F. Rudy, CEF |
| Advice & Counsel--Now That's What I Call Burning!, Jun - 2007, Frank Altmayer, MSF, AESF Fellow |
| Fact or Fiction? ‐ Technological Illiteracy ‐ How Do You Measure Up?, Jun - 2007, Jack W. Dini |
| Dollars and Sense--Seignorage, Jun - 2007, Tom Rochester |
| Thinking Outside the Shop, Jun - 2007, Judy Runge, Ph.D. |
| Shop Talk--Plating & Surface Finishing Retrospective, Jun - 2007, Originally contributed by Ronald Kornosky; Compiled by Dr. James H. Lindsay, AESF Fellow |
| Washington Update--Industry Focuses on Chemical Security, Workplace Safety and New Air Emission Regulation, Jul - 2007, Christian Richter & Jeff Hannapel, The Policy Group, Washington, DC |
| Finishing Industry–Department of Defense Meet for 3rd Defense Metal Finishing Workshop Held in Utah, Jul - 2007, |
| Mechanical Plating ‐ The Forté of Plating Systems & Technologies, Jul - 2007, |
| Advice & Counsel--Reel Problems, Jul - 2007, Frank Altmayer, MSF, AESF Fellow |
| Emerging Surface Finishing Technologies--Ionic Liquids for Surface Finishing Processes, Jul - 2007, Eric W. Brooman, Ph.D. |
| Fact or Fiction?--International Environmental Crime, Jul - 2007, Jack W. Dini |
| Finishers' Think Tank--Zinc & Post-Coatings: Facts to Consider, Jul - 2007, Stephen F. Rudy, CEF |
| Do You Have Control Of Your Learning Curve?, Jul - 2007, Jamie Flesch, CEF2 |
| Industrial Dry Coating Technologies and Applications, Jul - 2007, Keith Legg |
| Shop Talk--Plating & Surface Finishing Retrospective, Jul - 2007, Originally contributed by Ronald Kornosky; Compiled by Dr. James H. Lindsay, AESF Fellow |
| Washington Update--New Regulatory Options for Existing and Emerging Technologies Impact Surface Finishing Industry, Aug - 2007, Christian Richter & Jeff Hannapel, The Policy Group, Washington, DC |
| FriCSo's Innovative, Environmentally-Friendly Approach to Friction and Wear with Nanolayer-Based Technology, Aug - 2007, |
| Advice & Counsel--Reel Problems – Part 2, Aug - 2007, Frank Altmayer, MSF, AESF Fellow |
| Do's & Don'ts of Electroless Nickel Plating: Solutions using sodium hypophosphite, Aug - 2007, Donald W. Baudrand, Consultant |
| Fact or Fiction? ‐ Herbal Supplements ‐ Buyer Beware, Aug - 2007, Jack W. Dini |
| Finisher's Think Tank--Mass Finishing Review: Burnishing, Aug - 2007, Stephen F. Rudy, CEF |
| Management Corner -- The Psychology of Business Development, Aug - 2007, Michael P. Marshall, Ph.D. |
| Shop Talk--Plating & Surface Finishing Retrospective, Aug - 2007, Originally contributed by Ronald Kornosky; Compiled by Dr. James H. Lindsay, AESF Fellow |
| Washington Update--Congressional Action on Trade and Energy Issues: Is It Enough or Too Much?, Sep - 2007, Christian Richter & Jeff Hannapel, The Policy Group, Washington, DC |
| 2007 Bright Design Contest Winners, Sep - 2007, |
| Shop Talk--Plating & Surface Finishing Retrospective, Sep - 2007, Originally contributed by Ronald Kornosky; Compiled by Dr. James H. Lindsay, AESF Fellow |
| Finisher's Think Tank--Phosphate Coatings: Some Basic yet Pertinent Facts, Sep - 2007, Stephen F. Rudy, CEF |
| Dollars and Sense--An Introduction to the Economics of Metal Finishing, Sep - 2007, Tom Rochester |
| Advice & Counsel--Solving Acidic Solvent, Sep - 2007, Frank Altmayer, MSF, AESF Fellow |
| Fact or Fiction?--Changes and the Future, Sep - 2007, Jack W. Dini |
| Washington Update--Green Chemistry Legislation in Congress and Chemical Regulation in Europe, Oct - 2007, |
| Unexpected Results from Corrosion Testing of Trivalent Passivates, Oct - 2007, Tom Rochester & Zachary W. Kennedy |
| The Future of Metal Cleaning in North America, Oct - 2007, Mike Wyrostek |
| Management Corner--Safety First, Oct - 2007, Robert Green |
| Emerging Surface Finishing Technologies--Smart Coatings, Oct - 2007, Eric W. Brooman, Ph.D. |
| Finisher's Think Tank--Aluminum Designations Information Clarification, Oct - 2007, Stephen F. Rudy, CEF |
| Advice & Counsel--On the Rack, Oct - 2007, Frank Altmayer, MSF, AESF Fellow |
| Fact or Fiction?--Coal Mine Fires, Oct - 2007, Jack W. Dini |
| Shop Talk--Plating & Surface Finishing Retrospective, Oct - 2007, Originally contributed by Ronald Kornosky; Compiled by Dr. James H. Lindsay, AESF Fellow |
| Washington Update--GR Works with Several Federal Agencies on Efforts to Control the Use of Chemicals with Different Approaches, Dec - 2007, Christian Richter & Jeff Hannapel, The Policy Group, Washington, DC |
| Management Corner--Small Businesses Need a Plan, Dec - 2007, Alex Vasilantone |
| EPA Proposes New Area Source NESHAP Rule for Paint Stripping and Metal/Plastic Surface Coating Operations, Dec - 2007, K.P. Lowery, C. Buttry & Margot Fosnaugh |
| COST SAVINGS IN ELECTROLESS NICKEL DESPITE HIGH WORLD MARKET METAL PRICES, Jun - 2007, Michael Feldstein |
| Internal Stress of Electroless Nickel Deposits, Jun - 2007, David E. Crotty, Ph.D. and Nicole Micyus |
| Super High Speed Electroless Nickel Plating Process, Jun - 2007, Mahesh Darji |
| Wear properties of as plated Ni-2.5%P and Ni-5%P-SiC on Al356, Jun - 2007, S.H.Hashemi, S.R.Bakhshi, B.Adeli-moghaddam, E.Paymozd |
| An Easily Understood Technique for Measuring Vibratory Bowl Speed and Optimizing Vibratory Bowl Processing Efficiency, Jun - 2007, William P. Nebiolo |
| Investigation of Workload Fluid Characteristics in Vibratory Finishing, Jun - 2007, Thomas A. Silman and Joseph P. Domblesky |
| Developments In Citric Acid Passivation Of Stainless Steel, Jun - 2007, R. Kremer |
| The Fundamentals of Surface Engineering by Superfinishing using a Chemically Assisted Vibratory System, Jun - 2007, Jarrod Schell, Benjamin Hoiland, Damian Wilmot and John Rindt |
| Medical Device Surface Finishing by ECM, Jun - 2007, A. Lozano-Morales, L. Gebhart , M. Inman, E.J. Taylor, and P.O. Miller |
| Silver Plating; Past, Present and Future, Jun - 2007, Steven Burling, Stewart Hemsley, & Dr Jianqiao Hu |
| Observations on Porosity in Precious Metal Plating, Jun - 2007, Stewart Hemsley, Priscilla Hong, & Yin Li Chack |
| Receiver technology in draught power plants with heat accumulator, Jun - 2007, Radu Dan Rugescu |
| Effect of strain on the magnetotransport properties of Co/Ag multilayer films grown by pulse electrochemical deposition, Jun - 2007, C. S. Rizal, K. Ishida, A. Yamada, and Y. Ueda |
| Magnesium Repair by Cold Spray, Jun - 2007, Victor K. Champagne, Dr. Dennis Helfritch and Phillip F. Leyman |
| Chrome Free Conversion Coatings for Zinc and its Alloys, Jun - 2007, J.W. Bibber |
| Cerium Conversion Coatings on Zinc Plated Steels, Jun - 2007, Yon-Kyun Song and F. Mansfeld |
| Trivalent Yellow Chromate, Jun - 2007, Eric Olander CEF |
| Corrosion Resistance and Blackening Mechanism of Trivalent Black Chromium Passivation Films, Jun - 2007, Naruhiko Nojima |
| Alloying of Tin Plating Film with Silver by Combination of Multistage Plating and Heat Treatment for Antibacterial Property, Jun - 2007, Hideyuki Kanematsu, Hajime Ikigai, Michiko Yoshitake |
| The property of antibiotic antifinger –resin on zinc coated steel sheet, Jun - 2007, Hyun-Tae Kim |
| Non-reactive Stacked Surface Layers and Their Heat Treatment Behavior - The Application to Nickel Plating, Jun - 2007, |
| Electrochemical Formation of Nano-structured Metal Deposits and Anodic Oxide Coatings by Applying (DC+AC) Pulses and Using Drag Reducing Polymer Additives, Jun - 2007, Mois Aroyo |
| Design and validation of conformal anodes for thermal barrier coating on a triple vane, Jun - 2007, G. Nelissen, B. Van den Bossche, A. Rose, J. Foster |
| Nanocrystalline Cobalt-Alloy Coatings for Non-Line-of-Sight Chrome Replacement Applications, Jun - 2007, McCrea, J.L., Facchini, D., Gonzalez, F. and Palumbo, G. |
| New nickel- and hexavalent chromium free matte coating for decorative applications, Jun - 2007, Andreas Moebius, Danica Elbick and Guizhi Zeng |
| New Hexavalent Cr Free Etch for ABS and ABS/PC Electroplated Plastics, Jun - 2007, Walter Sommer, Kai Wang, Neil Brown, Jack McCaskie |
| A Global Market Survey of Trends and Drivers in Decorative Plating on Plastics, Jun - 2007, Jack McCaskie |
| Effect of Part Design on Injection-Molding and Plating-on-Plastic Processing, Jun - 2007, David M. Rudder |
| Functional and Decorative Trivalent Chromium Electroplating, Jun - 2007, A. Lozano-Morales, R.P. Renz, , J.J. Fortman,., E.J. Taylor, and P.O. Miller |
| Developing Pulse Phase Thermography as a Characterisation Tool for Grossly Sculpted Surfaces, Jun - 2007, Ang, K.C., Wood, R.J.K., Wang, L., Dulieu-Barton, J.M |
| Quantification of the influence of all important physical and chemical Tin plating bath parameters on the propensity for whisker formation, Jun - 2007, Dr. Juergen Barthelmes, Dr. Peter Kuehlkamp, Florence Lagorce-Broc, Din-Ghee Neoh, Gene Barlowe |
| Elaboration of highly ordered nanoporous alumina by two-step anodization: influence of experimental parameters on porous layer structure., Jun - 2007, P. THOMAS, P. BENABEN |
| Alternative to conventional aluminum anodize seals with an environmentally friendly seal process, Jun - 2007, Harish Bhatt |
| Hard Anodizing for Aluminion Pieces -Supporting Friction and Wearing- For The Automotion And Motorcycling Industry, Jun - 2007, Dr. Xavier Albert Ventura |
| Maximizing the Potential Future of Type II-III Anodizing Pushing the Envelope for Maximum Efficiency and Energy Savings, Jun - 2007, Fred Charles Schaedel |
| High Corrosion Resistant Plating Process for Magnesium Substrates, Jun - 2007, Eric J. Olander CEF |
| TOC Key to Bright Nickel Purity, Jun - 2007, |
| Handheld XRF for Coating Thickness and Coating Composition Measurement, Jun - 2007, Bogert, James R. |
| A NEW FRONTIER FOR DEPOSIT STRESS MEASUREMENTS, Jun - 2007, Leaman, F. H. |
| Visual degradation of Zinc-surfaces in salt-spray tests: Black spots and White haze, Jun - 2007, Dr. Sc. Marc Mertens |
| Quantifying Human Impressions of Glossy Plated Surfaces Using the Semantic Differential Technique, Jun - 2007, Hideyuki Kanematsu, Dana Barry, Jake Benham |
| Determination of Pyridinium-1-Propane-2-Hydroxide-3- Sulfonate and Saccharine in Brighten Nickel Electroplating Bath, Jun - 2007, Ying Zheng, Canzhu Gao, Rutao Liu |
| Exterior Decorative Coatings Improvements on Commercial Airplanes, Jun - 2007, Elden Altizer |
| Hexavalent Chromium (Cr+6) Reduction at U.S. Air Force Plant 44 in Tucson, Arizona, Jun - 2007, Paul Fecsik, Jim Arthur & Leanne Debias |
| Replacement of zinc phosphating and e-coating by a one-step primer?, Jun - 2007, Puomi, P., Van Ooij, W.J., Yin, Z. and Seth, A., |
| Novel, Effective, Non-toxic Zinc Free Anticorrosive Pigments for Industrial Maintenance Paints, Jun - 2007, Arieh Calahorra |
| How to Increase First Time Quality by Reducing Dirt Defects, Jun - 2007, Kevin Lockwood |
| THE FUTURE OF METAL CLEANING IN NORTH AMERICA, Jun - 2007, Mike Wyrostek |
| Consume Saving of Water and Energy Through Minimization, Jun - 2007, Dr. Xavier Albert Ventura |
| Is Tradition Costing Your Customers and Higher Rejects?, Jun - 2007, Charles Schultz |
| Closed-loop Chromium Plating Line, Jun - 2007, Sergey S. Kruglikov |
| Automatic Control of Process Solutions: the Use of Insoluble Anodes and Ion-exchange Membranes, Jun - 2007, Sergey S. Kruglikov |
| Shop Talk--Finishers' Think Tank Revisited--VII, Jan - 2006, By John Laurilliard, CEF Compiled by Dr. James H. Lindsay, AESF Fellow |
| The National Center for Manufacturing Sciences Cross-Sector Leveraging for Maximum Technology Output, Jan - 2006, By James H. Lindsay |
| Washington Update--Chrome Plating Receives Deferral From EPA, Jan - 2006, Christian Richter & Jeff Hannapel |
| Advice & Counsel--Titrating, Part II, Jan - 2006, Frank Altmayer, MSF |
| Finisher's Think Tank--A New Year, a New Set of Opportunities, Jan - 2006, Stephen F. Rudy, CEF |
| Fact or Fiction?--Enviromental Health Concerns, Jan - 2006, Jack W. Dini |
| Shop Talk--Plating & Surface Finishing Retrospective, Feb - 2006, By John Laurilliard, CEF Compiled by Dr. James H. Lindsay, AESF Fellow |
| Washington Update--Closing Arguments Given on Chrome PEL, Feb - 2006, Christian Richter & Jeff Hannapel |
| Advice & Counsel--WEEE + RoHS + ELV = Co + N + F +U + S + I + O + N --Complicated Regulations Make Life Tough for Surface Finishers, Feb - 2006, Frank Altmayer, MSF |
| Fact or Fiction? ‐ Forests ‐ Better Off Than You've Heard, Feb - 2006, Jack W. Dini |
| Finisher's Think Tank--Time is Valuable, Feb - 2006, Stephen F. Rudy, CEF |
| Shop Owner's Perspective, Mar - 2006, |
| Washington Update--FAA Drug & Alcohol Testing Requirements Will Impact Finishers, Mar - 2006, Christian Richter & Jeff Hannapel |
| Shop Talk--Plating & Surface Finishing Retrospective, Mar - 2006, By John Laurilliard, CEF Compiled by Dr. James H. Lindsay, AESF Fellow |
| Zinc-Nickel Electroplate as a Replacement for Cadmium on High Strength Steels, Mar - 2006, D.A. Wright, N. Gage and B.A. Wilson |
| Advice & Counsel--Galvanic and Other Corrosion Mechanisms, Mar - 2006, Frank Altmayer, MSF |
| Fact or Fiction?--Mother Nature's Surprising Pollutants, Mar - 2006, Jack W. Dini |
| Finisher's Think Tank ‐ Filtration ‐ It's a Must Have, Mar - 2006, Stephen F. Rudy, CEF |
| Industry News & Test Your Plating I.Q., Mar - 2006, |
| Washington Update--OSHA Issues Final Hexavalent Chromium PEL of 5 µg/m3, Apr - 2006, Christian Richter & Jeff Hannapel |
| Surface Finishing Management Forum, Apr - 2006, |
| Supplier's Perspective, Apr - 2006, |
| Mathematics and Modern Science, Apr - 2006, Bill Corzine |
| Shop Talk--Plating & Surface Finishing Retrospective, Apr - 2006, By John Laurilliard, CEF Compiled by Dr. James H. Lindsay, AESF Fellow |
| Advice & Counsel--OSHA Finalizes Cr+6 PEL, Now What?, Apr - 2006, Frank Altmayer, MSF |
| Fact or Fiction?--Sea Level Change, Apr - 2006, Jack W. Dini |
| Finishers' Think Tank--Filtering Cleaners is a Wise Choice, Apr - 2006, Stephen F. Rudy, CEF |
| The Story of Nickel Plating – Part I, Apr - 2006, George Dubpernell |
| Industry News & Test Your Plating I.Q., Apr - 2006, |
| Precision Spraying Makes Its Mark , Jan - 2006, Frank Linder and Benno Burggräf and Walter Kaspers |
| Specialty Finishing Boosts Customer Satisfaction, Jan - 2006, Jennifer Crighton and Jim Destefani |
| Better (and Safer) Buffing Through Chemistry, Jan - 2006, Jim Destefani |
| Vanadate Conversion Coatings: Alternative to Phosphate? , Jan - 2006, Donnald LaFlamme |
| Coating Thickness Measurement: The Fundamentals , Feb - 2006, Paul Lomax |
| Better Electrocleaning , Feb - 2006, Ray Dargis |
| Anodized Frames Go Off-Road , Feb - 2006, Jim Destefani |
| The Driving Force for the Ultimate Finish , Feb - 2006, Rich Domitrz |
| Powder Coating Spray Guns , Feb - 2006, Jennifer Creighton |
| The Importance of Powder Booth Filtration, Mar - 2006, Robert Allsop |
| Barrel Plating Continuous Improvement, Mar - 2006, Beverly A. Graves |
| Building an E-coat Line from the Ground Up, Mar - 2006, Jim Destefani |
| Solution Heating and Cooling , Mar - 2006, Jennifer Creighton |
| The Clear Alternative to Traditional Yellow Hex Films, Apr - 2006, Joe Ciejka |
| Sweeping Up Productivity Gains , Apr - 2006, Jim Destefani |
| Micro-Abrasive Blasting , Apr - 2006, Colin Weightman |
| Nozzle Maintenance for Finishing Fitness , Apr - 2006, Christian Canzano |
| Serendipity and Smart Management , May - 2006, Jim Destefani |
| Sublime Finishes , May - 2006, Jim Destefani |
| Small-Scale Thinking , May - 2006, Jim Destefani |
| THE POWDER COATING INSTITUTE , May - 2006, Gregory J. Bocchi |
| Curing with a Twist, Jun - 2006, Paul Mills |
| Maximizing Finishing Productivity, Jun - 2006, Ron Abramshe |
| Rising from the Ashes , Jun - 2006, Jim Destefani |
| Masking , Jun - 2006, Jennifer Creighton |
| Wearing Well, Jul - 2006, Michael D. Feldstein |
| Powder Coating Rx , Jul - 2006, Jim Destefani |
| Small Particles, Big Benefits, Jul - 2006, Sally Ramsey |
| Tiny Bubbles , Jul - 2006, F. John Fuchs |
| Unearthing Success , Aug - 2006, Jennifer Creighton |
| Choosing and Using Ball-Style Hones , Aug - 2006, Bruce Boyers |
| ELV, WEE, RoHS and Hex-Chrome Testing, Aug - 2006, Frank Altmayer |
| A New Take on Spray Guns, Aug - 2006, |
| Ovens for Curing, Baking and Stripping , Aug - 2006, Carl Izzo |
| Precision Painting at Precision Entry , Sep - 2006, Jim Destefani |
| Pretreatment Switch Nets Six-Figure Annual Savings , Sep - 2006, Jim Destefani |
| Custom Masking Helps Hixson Soar , Sep - 2006, Jim Destefani |
| Filter BEFORE the Plating Tank , Sep - 2006, Jack Berg |
| Spray Guns for Liquid Paint, Sep - 2006, Carl Izzo |
| Protecting the Troops—and Their Equipment , Oct - 2006, Bob McElroy |
| Cooking up Business, Texas-style , Oct - 2006, Jim Destefani |
| Improvements are Never Finished , Oct - 2006, Jim Destefani |
| The Illusion of Chrome , Oct - 2006, Robert Langlois |
| Conveyors and Paint Systems, Oct - 2006, Bernd Piel |
| Chrome Trim Gives the Jetta Some Pop, Nov - 2006, Jim Destefani |
| Paint Shop Life Cycle Management, Nov - 2006, Jan Pitzer and Tom Boyce |
| Teaming Up on Rejects , Nov - 2006, Rick A. Dostie |
| Keeping E-Coat Clean , Dec - 2006, Jim Destefani |
| Plate Better, Longer , Dec - 2006, Andreas Mobius |
| Better Spraying Off the Shelf, Dec - 2006, Jim Destefani |
| Try a Holistic Approach to Improve Anodizing Processes, Dec - 2006, Fred C. Schaedel |
| Coating Thickness Measurement , Dec - 2006, Paul Lomax |
| Investigation of Plasma Spray Coatings as an Alternative to Hard Chrome Plating on Internal Surfaces, - 2006, Legg, Keith O. and Sartwell, Bruce D. and Legoux, Jean-Gabriel and Nestler, Montia and Dambra, Christopher and Wang, Daming and Quets, John and Natishan, Paul and Bretz, Philip and Devereaux, Jon |
| Shop Talk--Plating & Surface Finishing Retrospective, Jun - 2006, Originally contributed by Ronald Kornosky Compiled by Dr. James H. Lindsay, AESF Fellow |
| Washington Update--Industry Approaches New OSHA Standard on Several Fronts, Jun - 2006, Christian Richter & Jeff Hannapel |
| The Golden Age of Electronics or "A Wonder-full Half-Century!", Jun - 2006, John G. Donaldson |
| Human Resources are Priority Issues For Finishing Shops of All Sizes, Jun - 2006, |
| Finisher's Think Tank--Alternatives for Hex Chrome Exposure Standard, Jun - 2006, Stephen F. Rudy, CEF |
| Advice & Counsel--Understanding Immersion Deposits, Jun - 2006, Frank Altmayer, MSF |
| Fact or Fiction?--Myths, Jun - 2006, Jack W. Dini |
| Zinc in the World of Electroplating, Jun - 2006, Ernest W. Horvick |
| Shop Talk--Plating & Surface Finishing Retrospective, Jul - 2006, Originally contributed by Ronald Kornosky Compiled by Dr. James H. Lindsay, AESF Fellow |
| Washington Update--EPA Sends Air Emissions Information Request to Hundreds of Finishing Facilities, Jul - 2006, Christian Richter & Jeff Hannapel |
| Chromium PEL Issues Dominate the Discourse at the Second SFIC Washington Forum, Jul - 2006, Dr. James H. Lindsay, AESF Fellow |
| Environmental Technology Verification Coatings and Coating Equipment Program (ETV CCEP). Final Technology Applications Group TAGNITE - Testing and Quality Assurance Plan (T/QAP), - 2006, Fisher, Robert J. |
| Evaluation of Shot Peening on the Fatigue Strength of Anodized Ti-6Al-4V Alloy, - 2006, Midori Yoshikawa |
| Magnetic Induction Machines Integrated into Bulk-Micromachined Silicon, - 2006, Arnaold, David P. and Das, Sauparna and Cros, Florent and Zana, Iulica and Allen, Mark G. and Lang, Jeffrey H. |
| Nanoimprinting of Micro-Optical Components Fabricated using Stamps Made with Proton Beam Writing, - 2006, van Kan, Jeroen A. and Bettiol, A. A. and Osipowicz, T. and Watt, F. |
| A Comparison of Bulk Precipitated Cerium Oxide Powders and Cerium Conversion Coatings and the Influence of Hydrogen Peroxide on Their Formation (Preprint), - 2006, Hayes, S. A. and Yu, P. and O'Keefe, T. J. and Stoffer, J. O |
| Nitric Oxide Generating Polymeric Coatings for Subcutaneous Glucose Sensors, - 2006, Meyerhoff, Mark E. |
| Pulse reverse plating for uniform nickel height in zone plates , - 2006, M. Lindblom,and_ H. M. Hertz, and A. Holmberg |
| Atlantic Region Metal Finishing Pilot Project, - 2006, Seider M. and Brodie F. Neil |
| Current Tin Whiskars Theory and Mitigation Practices Guidelines, - 2006, JEDEC |
| pH Measurement in Electroplating Processes, - 2006, Mettler - Toledo |
| Zetex' RoHS Compliance, - 2006, ZETEX Semiconductors |
| Pulse reverse plating for uniform nickel height in zone plates, - 2006, M. Lindblom, H. M. Hertz, and A. Holmberg |
| Atlantic Region Metal Finishing Industry Pilot Project, - 2006, Marc Sider, Eng., M.A.Sc. (Coordinator – Pollution Prevention and Energy Efficiency Canadian Association of Metal Finishers) |
| Electrodeposition of the Precious Metals: Osmium, Iridium, Rhodium, Rhenium, Ruthenium, - 2006, T. JONES, (Finishing Publications) |
| Evaluating a shot of peening on the fatigue strength of anodized Ti-6Al-4V Alloy , - 2006, Materials Research |
| Finisher's Think Tank--Caught on the Fly, Jul - 2006, Stephen F. Rudy, CEF |
| Fact or Fiction?--Is Environmentalism Dead?, Jul - 2006, Jack W. Dini |
| Washington Update--Industry to Assist with Pentagon's Coatings Technology Session this Fall, Aug - 2006, |
| Shop Talk--Plating & Surface Finishing Retrospective, Aug - 2006, Originally contributed by Ronald Kornosky Compiled by Dr. James H. Lindsay, AESF Fellow |
| Advice & Counsel--Cyanide Safety, Aug - 2006, Frank Altmayer, MSF |
| Fact or Fiction?--Organic Versus Synthetic, Aug - 2006, Jack W. Dini |
| Finisher's Think Tank--Nickel Plating Baths: Service Tips, Aug - 2006, Stephen F. Rudy, CEF |
| Washington Update--Federal and State Regulators Continue to Focus Attention on Chromium Plating, Sep - 2006, Christian Richter & Jeff Hannapel |
| Shop Talk--Plating & Surface Finishing Retrospective, Sep - 2006, Originally contributed by Ronald Kornosky Compiled by Dr. James H. Lindsay, AESF Fellow |
| Do's & Don't's--Copper Plating: Part I, Sep - 2006, Donald W. Baudrand |
| Advice & Counsel ‐ Cyanide Safety ‐ Part II: Emergency Response, Sep - 2006, Frank Altmayer, MSF |
| Fact or Fiction?--Treat Health Scares With Caution, Sep - 2006, Jack W. Dini |
| Finisher's Think Tank--The Bottom Line - Make it Better, Sep - 2006, Stephen F. Rudy, CEF |
| Improve the Benefits of Continuous Process Improvement, Sep - 2006, Bob Cicerone, Richard Sassaman and John Swinney |
| Washington Update--GR Highlights Technology Issues, Critical Supply Chains and Chemical Management Strategies, Oct - 2006, Christian Richter & Jeff Hannapel |
| Alternatives to Hexavalent Chromium to Comply with European Union's Directives (ELV, RoHS and WEEE), Oct - 2006, Harish Bhatt |
| Shop Talk--Plating & Surface Finishing Retrospective, Oct - 2006, Originally contributed by Ronald Kornosky Compiled by Dr. James H. Lindsay, AESF Fellow |
| Advice & Counse ‐ Cyanide Safety ‐ Part III: Emergency Response (Continued), Oct - 2006, Frank Altmayer, MSF |
| Fact or Fiction?--Radiation, Regulations and Terrorism, Oct - 2006, Jack W. Dini |
| Emerging Surface Finishing Technologies and Synergy, Oct - 2006, Eric W. Brooman, Ph.D. |
| Finisher's Think Tank--Analysis . . . Observation . . . Maintenance, Oct - 2006, Stephen F. Rudy, CEF |
| A Look Back in Plating & Surface Finishing: Copper Plating (1909-1959), Oct - 2006, Frank Passal |
| Washington Update--OSHA Issues Regulatory Clarifications for Finishing Industry on Hexavalent Chromium Workplace Exposure Rule Requirements, Dec - 2006, Christian Richter & Jeff Hannapel |
| Maryland Eastern Shore Microwave Company Invests in World-Class Plating, Dec - 2006, Al Knezevich |
| Shop Talk--Plating & Surface Finishing Retrospective, Dec - 2006, Originally contributed by Ronald Kornosky Compiled by Dr. James H. Lindsay, AESF Fellow |
| Advice & Counse ‐ Die Casting & Plating ‐ Part I, Dec - 2006, Frank Altmayer, MSF |
| Common Sense ‐ What You Don't Know Can Hurt You! Strategic Goals Revisited—Part II, Dec - 2006, Herb Nissen |
| Do's & Don't's--Copper Plating: Part I, Dec - 2006, Donald W. Baudrand |
| Finisher's Think Tank--Meeting Your Needs, Dec - 2006, Stephen F. Rudy, CEF |
| Fact or Fiction?--Perchlorate, Dec - 2006, Jack W. Dini |
| The Complete Spectrum Guide to Top Quality Anodizing: Maximizing Effi ciency and Energy Savings, Dec - 2006, Fred Charles Schaedel |
| A PREVENTATIVE MAINTENANCE PLAN FOR CONTINUOUS PAINT AREA PROCESS IMPROVEMENT, Jun - 2006, Walt Wick |
| THE NOVEO-AIR VENTILLATION CONTROLLER AT CANADEL: SPECTACULAR ENERGY SAVINGS!, Jun - 2006, J.F. Bond |
| The Basics of Surface Engineering by Isotropic Superfinishing (ISF) Using a Traditional Vibratory Finishing Bow, Jun - 2006, William P. Nebiolo |
| Development of Bristle Blasting Tool for Cleaning and Preparation of Metallic Surfaces, Jun - 2006, Stango, R. J. |
| A Process Model for Surface Material Removal in Vibratory Bowls and Finishing Processes, Jun - 2006, Joseph P. Domblesky and Thomas A. Silman |
| Erosion-corrosion behaviour of innovative hardening treatments and coatings on stainless steels for food industry applications., Jun - 2006, Morten S. Jellesen, Lisbeth Rischel Hilbert, Per Møller |
| Functional Single-Cell Trivalent Chromium Electroplating Method, Jun - 2006, John R. Willey, CEF |
| Control of Anisotropism for Electroplated Parts of Complex Shape, Jun - 2006, Craig Bishop, Agnes Rousseau |
| Nanostructure and Properties of Cr-C Coatings, Jun - 2006, M.J.L. Gines, F.J. Williams, and C. A. Schuh |
| Chromic Acid Etching-free Plating Process Using ABS Alloy Resin, Jun - 2006, Toshimitsu Nagao, Kazuya Satoh, Toshihiro Tai, Weihong Gu and Hitomi Omae |
| SIGNIFICANT CRACKING PROPENSITY REDUCTION OF HARD ANODIZED 7075 AND IMPROVED WEAR PERFORMANCE OF ANODIZED 2024 OBTAINED THROUGH CRYOGENIC TREATMENT, Jun - 2006, Mike G. Wilfley & George A. Calboreanu, Ph.D. |
| The Complete Spectrum Guide to Top Quality Anodizing Maximizing Efficiency and Energy Savings, Jun - 2006, Fred Charles Schaedel |
| New Methods For Non-Contact Anodize Measurement, Jun - 2006, Joseph Price |
| Sealing Abrasion Hard Anodizing With Silans And Polymers, Jun - 2006, Dr. Xavier Albert Ventura |
| Anodization of Twin Roll Cast Aluminum Sheets, Jun - 2006, Beril Dilsizoglu |
| Understanding the Anodic Oxide Finish – The First Commercially Available Nanoscale Coating, Jun - 2006, Jude M. Runge |
| Finishing Technology Method for the Lightweight Reaction Motor NERVA, Jun - 2006, Radu Dan Rugescu, Dragos Ronald Rugescu |
| SEM Investigation of Zinc Whiskers on Hot-dip Galvanized Coating and Bright Electroplated Coating, Jun - 2006, Reima Lahtinen, Tom E. Gustafsson |
| Characteristics of Electroplated Zinc Nickel Deposits from Alkaline and Acid Electrolytes, Jun - 2006, |
| Alloying of Stacked Nickel/Zinc Films Through Heat Treatment, Jun - 2006, Hideyuki Kanematsu, Hajime Ikigai & Michiko Yoshitake |
| Development of Corrosion Resistant Silica Coating on Surface Modified Zinc Coated Steel, Jun - 2006, Prabhu Ganesan, Yoon-Seok Choi, Swaminatha P. Kumaragu and Branko N. Popov |
| Development of Sacrificial Zn-Sn Coatings by Pulse Electrodeposition Process, Jun - 2006, Yoon-Seok Choi, Prabhu Ganesan, Swaminatha P. Kumaraguru and Branko N. Popov |
| Quantification of Human Sensitivity Affected By Surface Color Tone of Plating, Jun - 2006, Hideyuki Kanematsu, Koki Nio |
| Decorative trivalent chromium The challenges of change facing the industry, Jun - 2006, Alan Gardner |
| Lubrication of Fasteners with Different Geometries Using Minimal Treatments, Jun - 2006, Brad Staples, CEF, Bill Meyer, Craig V. Bishop |
| Organic Corrosion Inhibitors for Acidic Media, Jun - 2006, Frank Dietsche, Ralf Friedrich, Helmut Witteler & Michael J. Anchor |
| A new approach for biologically inhibiting surfaces, Jun - 2006, Per Møller and Lisbeth Rischel Hilbert |
| The Use of Immersed Electrochemical Modules (IEMs) in Plating Industry, Jun - 2006, Dr. Sergey S. Kruglikov |
| Electroplating as an in-house integrated production process - state of the art, Jun - 2006, Andreas Moebius |
| Industrial Dry Coating Technologies and Applications, Jun - 2006, Keith Legg |
| Benefits of modelling for the electroplating industry, Jun - 2006, Bart Van den Bossche, J. Deconinck, Gert Nelissen, Marius Purcar |
| Filtration Techniques in Relation to Waste Minimisation, Jun - 2006, Huw Williams |
| Removal of Cadmium and Cyanide Ions from Rinse Water in Plating Lines, Jun - 2006, Dr. Sergey S. Kruglikov, Victor I. Sirotkin, Nadya S. Kolotovkina, Dmitri Yu. |
| The Use of Immersed Electrochemical Modules (IEMs) in Plating Industry, Jun - 2006, Dr. Sergey S. Kruglikov |
| Electrowinning of Metals using the Rotating Electrode Technology, Jun - 2006, Danielle Miousse, Ph.D., CEF-4 and Frédéric Biton |
| Magnetoresistance effect, Magnetism, and Microstructure in Co-Au Granular Alloy Films Produced By Pulsed Electrochemical deposition, Jun - 2006, C.S. Rizal |
| ELECTRIC PROPERTIES OF COMPOSITION MODULATED NI-CO-CU PARTICLE AND MULTILAYER FILMS PRODUCED BY PULSE CONTROL ELECTROCHEMICAL DEPOSITION METHOD, Jun - 2006, C.S. Rizal |
| Metallization of Dielectrics Using Conductive Polymer, Jun - 2006, Dr. J. Rasmussen, Dr. W. Kronenberg & A. Lachowicz |
| Acid Gold Plating and Palladium Nickel in Electronic Applications An Update, Jun - 2006, Stewart J. HEMSLEY, Priscilla HONG, Yin Li CHACK |
| Laser Direct Structurization for the Selective Metallization of MIDs, Jun - 2006, Nils Heininger, Gerhard Naundorf, Wolfgang John, FriedrichTalgner, & John E. McCaskie |
| High-rate electron beam deposition – the possibility of high-quality coating of large areas, Jun - 2006, Frank-Holm ROEGNER, Christoph Metzner |
| Amorphous and nano-structured alloys of increased corrosion resistance deposited by magnetron sputtering, Jun - 2006, Eimutis Juzeliunas and Konstantinas Leinartas |
| Precious Metal Plating and the Environment., Jun - 2006, Steven Burling |
| ELECTROLYTE MAINTENANCE BY ADSORBER POLYMER AND LIQUID-LIQUID EXTRACTION, Jun - 2006, A. Möbius, C. Werner, A. Koenig, B. Griffith, S. Peto |
| Emission Estimate Methods, Jun - 2006, Fullen, Warren J. |
| Mathematical Optimization of plating processes, Jun - 2006, A. Telukdarie, W. Zhang |
| New Techniques For Minimization Of Waste And Contaminated Water, Jun - 2006, Dr. Xavier Albert Ventura |
| Improvement of hardness and mechanical properties of electroless nickel boron deposits by thermochemical treatment, Jun - 2006, V. Vitry, F. Delaunois, C. Dumortier |
| Metals Free Stabilized Electroless Nickel Processes for the 21st Century, Jun - 2006, David E. Crotty |
| Development of a New Electroplating Process for Hard Ni-W Alloys, Jun - 2006, Io Mizushima*, Peter T. Tang and Hans N. Hansen |
| Application of Autocatalytic or Electroless Nickel for the Recuperation of Corroded Electrolytic Cells, Jun - 2006, Amnon Vadasz F., Ph.D., P.E., CEF |
| Is There Relevance of Deposit Brightness in Electroless Nickel Processes?, Jun - 2006, Nicole J. Micyus, Carl P. Steinecker |
| Alternatives to Hexavalent Chromium to comply with European Union’s Directives (ELV, RoHS & WEEE), Jun - 2006, Harish Bhatt |
| Alternatives to the Hexavalent Chromates: An Evolution of Trivalent Chromate Technologies, Jun - 2006, William Eckles and Rob Frischauf |
| Analysis of Component Failures Related to Surface Finish and Plating Problems, Jun - 2006, Suess, S.J. |
| Novel Cost Reduction Strategy for High Speed Acid Copper Plating, Jun - 2006, George S. Bokisa |
| Mapping and Modeling Tools and Techniques for Metal Finishing Process Improvement, Jun - 2006, Kevin L. Klink, PE, Jeffrey R. Lord MSF and Peter Gallerani MSF AESF Fellow |
| Various Properties of Tin-Copper Alloy Film Produced By Heat Treatment, Jun - 2006, Hideyuki Kanematsu, Hajime Ikigai & Michiko Yoshitake |
| Enviolet-UV-Oxidation, a Proven Method for Bright-Nickel Plating Bath Purification, Jun - 2006, Rudy Mathis, Ralph Dixon, Martin Sørensen, Jürgen Weckenmann and Andreas Fath |
| Wear behavior of Ni-B electroless films on a steel S7, Jun - 2006, Carlos Domínguez-Ríos, Roal Torres-Sánchez and Alfredo Aguilar-Elguezabal |
| ELV-Compliant Speciality Electroless Nickel Processes, Jun - 2006, Christopher Ringholz and George Shahin C.E.F. |
| Throwing Power of Copper Sulfate Plating Baths, Jun - 2006, Dr. Sergey S. Kruglikov, Lucia V. Kosmodamianskaya, and Ksenia V. Kazakova |
| Practical Selection of Periodic Pulse Reverse Rectifiers, Jun - 2006, Waasy Boddison |
| The 45th William Blum Lecture, AESF Research Projects and Some Related Results, - 2006, Prof. Howard W. Pickering |
| Shop Talk--Some Production Plating Problems & How They Were Solved—Part 17, Jan - 2005, Collected and edited by Fred J. Kaim, Compiled and updated by Dr. James H. Lindsay, AESF Fellow |
| Advice & Counsel--So, What's New? Finishers Face Difficult Issues in 2005, Jan - 2005, Frank Altmayer, MSF |
| Finisher's Think Tank--Training is an Investment that Builds Experience, Jan - 2005, Stephen F. Rudy, CEF |
| Fact or Fiction?--Smell and Health Hazards, Jan - 2005, Jack W. Dini |
| Film Stress and Magnetic Properties of Nickel, Cobalt, Iron and Iron-Cobalt Alloy Electrodeposits, Jan - 2005, S. Kelcher, D-Y. Park, B-Y. Yoo and N.V. Myung |
| Conversion Coatings for Aluminum and Magnesium, Jan - 2005, Don Baudrand, CEF |
| A Surface Finishing Government Relations Update, Feb - 2005, Christian Richter & Jeff Hannapel |
| Shop Talk--Some Production Plating Problems & How They Were Solved—Part 18, Feb - 2005, Collected and edited by Walter H. Wade, Compiled and updated by Dr. James H. Lindsay |
| Advice & Counsel--Plating Magnesium, Feb - 2005, Frank Altmayer |
| Fact or Fiction?--Computer Models Don't Always Work, Feb - 2005, Jack W. Dini |
| Finisher's Think Tank--Alternative Procedures & Processes, Feb - 2005, Stephen F. Rudy |
| Finishing Facts, Feb - 2005, |
| Electropolishing Iron-Cobalt-Vanadium Laminate Stacks to Improve Performance of Electrical Machinery, Feb - 2005, Dr. Andrew Kenny, * Alan Palazzolo, Jason Preuss, Randall Tucker & Kevin Konno |
| Effects of Organic and Metal Contamination on the Etch Rate of Acid Baths - Implications for Extended Acid Use, Feb - 2005, A. Ellis, J. Deluhery & N. Rajagopalan |
| Surface and Mechanical Properties of Steel Processed By Electro-Plasma Technology, Feb - 2005, P. Gupta & G. Tenhundfeld |
| Shop Talk--Some Production Plating Problems & How They Were Solved—Part 19, Mar - 2005, Collected and edited by Walter H. Wade, Compiled and updated by Dr. James H. Lindsay |
| A Surface Finishing Government Relations Update, Mar - 2005, Christian Richter & Jeff Hannapel |
| Study Shows Acid Extender Really Works!, Mar - 2005, |
| Advice & Counsel--Hexavalent Chromium Headaches, Mar - 2005, Frank Altmayer |
| Fact or Fiction?--Gloomy Predictions Win The Day, Mar - 2005, Jack W. Dini |
| Finisher's Think Tank--There is No Alternative for Effective Cleaning, Mar - 2005, Stephen F. Rudy |
| Finishing Facts, Mar - 2005, |
| Experimentation and Modeling of Electrodeposition of Rhenium-188 ( 188 Re) on Medical 316L Stainless Steel Wires, Mar - 2005, Huixiong Zhang & Urs O. Häfeli |
| Novel and Innovative Non-Cyanide Silver Process: A Report on Commercial Plating Experiences, Mar - 2005, Sascha Berger & Gerhard Hoffacker |
| Understanding the Effect of Additives in Electroless Copper Deposition: Correlating Deposition Rates with Absorption and Complexation, Mar - 2005, Jun-Shang Chang, Show-Chin Kou and Aina Hung |
| Electrodeposition of Zinc from Acetate Baths, Mar - 2005, R Sekar & S. Jayakrishnan |
| Shop Talk--Some Production Plating Problems & How They Were Solved—Part 20, Apr - 2005, Collected and edited by Walter H. Wade, Compiled and updated by Dr. James H. Lindsay |
| A Surface Finishing Government Relations Update, Apr - 2005, Christian Richter & Jeff Hannapel |
| 118-Year-Old Job Shop Still Provides "Old-Time" Quality Finishing, Apr - 2005, Don Berry |
| Advice & Counsel--Do it Yourself PEL Testing, Apr - 2005, Frank Altmayer |
| Finisher's Think Tank--Compliance & Improvement are Helping the System, Apr - 2005, Stephen F. Rudy |
| Fact or Fiction?--Eco-Imperialism, Apr - 2005, Jack W. Dini |
| Nano-particle Composite Plating as an Alternative to Hard Chromium and Nickel Coatings, Apr - 2005, M.L. Klingenberg, E.W. Brooman and T.A. Naguy |
| Eductor Agitation for a Nickel Electroplating Installation, Apr - 2005, C. Porter & D.R. Gabe |
| Spectrophotometric Determination of Sulfamic Acid in Metal Sulfamate Bath Effluents, Apr - 2005, B. Deepa, K.S. Nagaraja and N. Balasubramanian |
| Electroless Deposition of Pure Nickel Films from a Simple Solution Consisting of Nickel Acetate and Hydrazine, Apr - 2005, S. Yae, K. Ito, T. Hamada, N. Fukumuro & H. Matsuda |
| Finishing Facts, Apr - 2005, |
| Shop Talk--Some Production Plating Problems & How They Were Solved—Part 22, May - 2005, Collected and edited by Isadore Cross, Compiled and updated by Dr. James H. Lindsay |
| A Surface Finishing Government Relations Update, May - 2005, Christian Richter & Jeff Hannapel |
| Fact or Fiction?--The Carcinogenic Body, May - 2005, Jack W. Dini |
| Advice & Counsel--Tin Basics, May - 2005, Frank Altmayer |
| Finisher's Think Tank--Trivalent Chromates Boosting Systems & Compliance, May - 2005, Stephen F. Rudy |
| Finishing Facts, May - 2005, |
| Chemical Oxidation of Aluminum in Chromic Acid Solutions, May - 2005, Stojan S. Djokic |
| A Fuzzy-Logic-Based Approach to Cleaner Production Evaluation for Surface Finishing Plants, May - 2005, Arnesh Telukdarie, Chris Brouckaert and Yinlun Huang |
| Electroplating of Copper on Annular Zirconium Alloy Billets, May - 2005, P. Balakrishna, B.N. Murty, S.K. Jha, P.K. Krishnan & N. Saibaba |
| Electroless Ni-P-TiO 2 -Based Composite Coatings for Surface Engineering Applications, May - 2005, S. John, K.N. Srinivasan, P.M. Kavimani, K. Hari Krishnan, J. Praveen, M.Ganesan |
| OSHA's Proposed Chromium PEL And the Problem of Sampling, Jun - 2005, Bill Corzine |
| Globalization and Trade: Current Policies Need Review, Jun - 2005, |
| Shop Talk--Some Production Plating Problems & How They Were Solved—Part 23, Jun - 2005, Collected and edited by John D. Horner, Compiled and updated by Dr. James H. Lindsay |
| Advice & Counsel--Working With Salt Spray Tests, Jun - 2005, Frank Altmayer |
| Fact or Fiction?--Carbon Dioxide and Climate Change, Jun - 2005, Jack W. Dini |
| Finisher's Think Tank ‐ Checklists ‐ Too Few, Just Right, Too Many?, Jun - 2005, Stephen F. Rudy |
| Corrosion Behavior of Electrodeposited Tin-Zinc Alloy Coatings on Steel, Jun - 2005, Eric Maurer, Howard W. Pickering & Konrad Weil |
| Finishing Facts, Jun - 2005, |
| Measuring the Elastic Moduli of Electroless Nickel-Phosphorus Deposits, Jun - 2005, Terry Sanderson |
| Design of an Optimal Reversed Drag-out Network for Maximum Chemical Recovery in Electroplating Systems, Jun - 2005, Qiang Xu and Yinlun Huang |
| Composite Nickel Coatings Containing Lubricating Oil Microcapsules and Their Tribological Properties, Jun - 2005, Liqun Zhu & Liu Feng and Yinghe He |
| Industry is Big Winner In Bright Design Competition, Jul - 2005, |
| Shop Talk--Finishers' Think Tank Revisited, Jul - 2005, By John Laurilliard, Compiled by Dr. James H. Lindsay |
| Surface Finishing Government Relations News, Jul - 2005, Christian Richter & Jeff Hannapel |
| Advice & Counsel--Why is Aluminum So Difficult to Plate?, Jul - 2005, Frank Altmayer |
| Finisher's Think Tank--Safety From an Application Side, Jul - 2005, Stephen F. Rudy |
| Fact or Fiction?--Future Generations, Jul - 2005, Jack W. Dini |
| Batch and Spot Repairs for Color-Anodized Panels, Jul - 2005, Hong-Hsiang (Harry) Kuo & Yar-Ming Wang |
| Direct Plating of Steel with Pyrophosphate Copper, Jul - 2005, S.B. Feng & S.B. Shang |
| Pro-active Job Shops Prosper In a Shrinking Finishing Market, Aug - 2005, Don Berry |
| Washington Report, Aug - 2005, Christian Richter & Jeff Hannapel |
| Shop Talk--Finishers' Think Tank Revisited—II, Aug - 2005, John Laurilliard, CEF, Compiled by Dr. James H. Lindsay, AESF Fellow |
| Advice & Counsel--Waste Treatment Queries, Aug - 2005, Frank Altmayer, MSF |
| Fact or Fiction?--Heat and Cold-Related Deaths, Aug - 2005, Jack W. Dini |
| Finisher's Think Tank--Some Basic Facts About NADCAP, Aug - 2005, Stephen F. Rudy, CEF |
| Finishing Facts, Aug - 2005, |
| Characterization of Cu/Ni-B Multilayers Deposited by Dynamic Chemical Plating, Aug - 2005, F. Ghanem, G. Stremsdoerfer * , P-H. Cornuault, Y. Meas-Vong and R. Ortega-Borges |
| Process and Properties of Electroless Ni-P-PTFE Composite Coatings, Aug - 2005, Yating Wu, Jiaqiang Gao, Bin Shen, Lei Liu, Wenbin Hu & Wenjiang Ding |
| Shop Talk--Finishers' Think Tank Revisited—III, Sep - 2005, John Laurilliard, CEF, Compiled by Dr. James H. Lindsay |
| Washington Report, Sep - 2005, Christian Richter & Jeff Hannapel |
| MFSA Conference Examines Science & Impact Of OSHA's Proposed Chromium PEL, Sep - 2005, James H. Lindsay |
| Advice & Counsel--"Verboten", Sep - 2005, Frank Altmayer, MSF |
| Fact or Fiction?--Overweight, But Healthy, Sep - 2005, Jack W. Dini |
| Finisher's Think Tank--Analysis, Observation & Maintenance Simple Concepts That Bring Big Benefits, Sep - 2005, Stephen F. Rudy, CEF |
| Twenty-six Year Corrosion Study Comparing Decorative Hexavalent and Trivalent Chromium, Sep - 2005, Dr. Donald L. Snyder, AESF Fellow |
| Finishing Facts, Sep - 2005, |
| A Continuous Electroplating Model for Poorly Conductive Substrates, Sep - 2005, Dian-long Wang, Chang-song Dai, Erhan Hai & Zhao-hua Jiang |
| Shop Talk--Finishers' Think Tank Revisited—IV, Oct - 2005, John Laurilliard, CEF, Compiled by Dr. James H. Lindsay, AESF Fellow |
| Washington Report, Oct - 2005, Christian Richter & Jeff Hannapel |
| Advice & Counsel--Mail Call--Recently Received Communications to "Advice & Counsel", Oct - 2005, Frank Altmayer, MSF |
| Finisher's Think Tank--Winter Means Heat Finishing Problems and Benefi ts Come With Changing Seasons, Oct - 2005, Stephen F. Rudy, CEF |
| Fact or Fiction?--The Ozone Hole, Oct - 2005, Jack W. Dini |
| Finishing Facts, Oct - 2005, |
| The Electrochemical Deposition of Tin-Nickel Alloys and the Corrosion Properties of the Coating, Oct - 2005, Morten S. Jellesen & Per Møller |
| Fabrication of a High Heat Dissipating Double-Sided Printed Circuit Board, Oct - 2005, Hu Wencheng, Yang Chuanren, Qiu Yan & Zhu Lin |
| Shop Talk--Finishers' Think Tank Revisited—V, Nov - 2005, John Laurilliard, CEF, Compiled by Dr. James H. Lindsay, AESF Fellow |
| Washington Report, Nov - 2005, Christian Richter & Jeff Hannapel |
| Advice & Counsel--Nickel Plating Headaches, Nov - 2005, Frank Altmayer, MSF |
| Fact or Fiction?--Polio Vaccine and Cancer, Nov - 2005, Jack W. Dini |
| Finisher's Think Tank--Corrosion Prevention is the Main Focus, Nov - 2005, Stephen F. Rudy, CEF |
| Finishing Facts, Nov - 2005, |
| Management of Spent Alkaline Cleaners, Nov - 2005, George Cushnie, Paul Chalmer, Greg Marsh and David Ferguson |
| Sputter Seeded Nucleation of Smooth Electroless Nickel Growth, Nov - 2005, Leonard Nanis |
| Electroplating in the Context of Worldwide Nanotechnology Initiatives, Jun - 2005, U. Erb |
| Synthesis, Structure and Properties of Nanocrystalline Nickel-Phosphorus Electrodeposits, Jun - 2005, Y. Zhou, U. Erb, K.T. Aust, F. Gonzalez and G. Palumbo |
| Are Direct Current Chromium Deposits Nanogranular?, Jun - 2005, Craig V. Bishop, Dr. Allen R. Jones, Dr. Agnes Rousseau and Dr. Charles McFarland |
| Composite Nanomaterials: Contribution of Chromium Electrodeposition, Jun - 2005, Prof. Patrick Benaben |
| Microribbons in Hard Chromium Electrodeposits, Jun - 2005, Allen R. Jones and Craig V. Bishop |
| Electroless Nickel and the End-Of-Life Vehicle Directive, Jun - 2005, Ronald N. Duncan |
| Converting to Lead Free, Cad Free Electroless Nickel, Jun - 2005, Kimberly Tress |
| The EDEN System for Electroless Nickel Bath Life Extension and Consistent Quality, Jun - 2005, Peter Longfield & Graham Orgill |
| Effectively Problem Solving an Electroless Nickel Plating Operation, Jun - 2005, Brad Durkin |
| Lead and Cadmium Free Electroless Nickel Processes For The 21st Century, Jun - 2005, David E. Crotty |
| Nickel- and Cobalt-Based Nano-Composite and Nano-Structured Alternatives to Chromium Coatings, Jun - 2005, Eric W. Brooman, Ph.D. |
| Electroplating Nanocomposite Films with an Impinging Jet Electrode, Jun - 2005, Steven J. Osborne, Wendi S. Sweet, and Jan B. Talbot |
| Magnetotransport Studies in Co/Cu and Ag Nano-structure Films Prepared by Pulse Electrochemical Deposition, Jun - 2005, C. S. Rizal |
| Optimization of a Nickel rack plating process using Elsyca PlatingMaster, Jun - 2005, G. Nelissen, B. Van den Bossche, L. Bortels |
| 3D Simulation and Validation of a Ni plating Process for Reflector Applications, Jun - 2005, Bart Van den Bossche, Leslie Bortels, Gert Nelissen, Chris Jensen, Karlheinz Strobl |
| Model development for optimum acid usage and production efficiencies, Jun - 2005, A. Telukdarie, & C.J. Brouckaert |
| Pulse Ramp Mixed Electrolyte Anodizing Automated & Practical – All Aluminum and Titanium Alloys, Jun - 2005, Fred Charles Schaedel |
| An RoHS Compliant Conversion Coating System For Aluminum And its Alloys, Jun - 2005, John W. Bibber, Ph. D. |
| The Effect of Sealing on Hard Anodized Aluminum, Jun - 2005, Dr. Xavier Albert Ventura |
| Batch and Spot Repairs for Color-Anodized Panels, Jun - 2005, Hong-Hsiang (Harry) Kuo and Yar-Ming Wang |
| Have You Checked Your Pulse Lately? A look at the most recent advances in Pulse Power Supply Technology., Jun - 2005, David Osero |
| Bi-polar (DC+AC) Pulse-Reverse Technique for the Deposition of Metal Coatings with Improved Properties, Jun - 2005, M. Aroyo, N. Tzonev |
| Electroforming of Thick Layers from Sulfite Gold Alloys in the LIGA Process, Jun - 2005, Dambrowsky N., Bade K., Schulz J., Köster F. |
| Evaluation of Defect Structure in Pulse Plated Trivalent Chromium Layers by Small Angle Neutron Scattering, Jun - 2005, Y. Choi, Y.S. Hahn, M. Kim & S.C. Kwon |
| A Study on the Composite Electrodeposition of Nickel With ?-Al2O3 nanoparticles, Jun - 2005, Jianping Liu, Guopeng Zhao, Chenggang Hu |
| Functional Trivalent Chromium Plating: An Alternative to Hexavalent Chromium Plating, Jun - 2005, R.P. Renz, CEF, J.J. Fortman, Ph.D., and E.J. Taylor, Ph.D. |
| Tin-Bismuth Finishes and the Phenomenon of Whiskers, Jun - 2005, Sudarshan Lal & Thomas D. Moyer |
| Alloy Film Production of Tin-Copper Through Heat Treatment of Stacked Layers, Jun - 2005, Hideyuki Kanematsu, Hisakazu Ezaki. Naoko Yanagi & Takeo Oki |
| Electrochemical Microfabrication for High-Aspect Ratio 3-D Microstructures, Jun - 2005, Gang Zhang |
| Modern Trends & Developments in Plating with Platinum Group Metals, Jun - 2005, Steven Burling |
| Pulsed Electrodeposited Sn-Cu Alloys for Use as Pb-Free Component Finishes in Microelectronic Applications, Jun - 2005, Kristian P. Olsen and Douglas G. Ivey |
| Palladium and its Alloys – A Revival?, Jun - 2005, Dr. C. A. Dullaghan, S. Daniels, S. Burling, J. Gonzalez & Stewart J. Hemsley |
| Antifungal Characteristics of Some Metal Plating, Jun - 2005, Hideyuki Kanematsu & Hajime lkigai, Kensuke Kuroda & Akira Ohmori |
| Antibacterial Activity by Alloying of Tin & Copper Plating, Jun - 2005, Hajime lkigai, Hideyuki Kanematsu, Kensuke Kuroda & Akira Ohmori |
| Thickness Distribution Calculation of Electroplating to a Resistive Electrode- Electrolytic Copper Plating to Electroless Copper Plating, Jun - 2005, Katsuhiko Ohara, Sugiura Yutaka, Asa Fujio & Hidekazu Kaneda |
| Toward Elimination of Cyanide Processes in the Airline Finishing Industry, Jun - 2005, Jeanne Durnford |
| Integrated Process Control for the Modern Surface Finishing Facility, Jun - 2005, Jeffrey R. Lord and Kevin L. Klink |
| Evaluating Process Control Test Methods in Establishing Process Limits Process Control in Surface Finishing: Part I, Jun - 2005, Jeffrey R. Lord, Peter A. Gallerani, and Kevin L. Klink |
| Building Your Own "HMI SCADA" Process Control System, Jun - 2005, John P. Bougneit & Craig A. Henry |
| Twenty-six Year Corrosion Study Comparing Decorative Hexavalent and Trivalent Chromium, Jun - 2005, Dr. Donald L. Snyder |
| The Electrochemical Deposition of Tin-Nickel Alloys and the Corrosion Properties of the Coating, Jun - 2005, Morten S. Jellesen, Per Møller |
| Decorative and Functional Finishes by Low Temperature Arc Vapor Deposition, Jun - 2005, Klaus Brondum |
| Vibratory Bowl Optimization by Proper Mechanical Set-up and the Use of Chemical Accelerators to Virtually Eliminate Hand Polishing of Steel Parts, Jun - 2005, William P. Nebiolo |
| A New Zinc Chloride Electroplating Bath, Jun - 2005, Richard Painter |
| Electrochemical Treatment of Jewelry Alloys of Gold in an Acidified Solution of Thiourea, Jun - 2005, Sergey Nersisyan |
| New Electrodeposited Rubber-bonding Alloy Coatings, Jun - 2005, Sergey S. Kruglikov. Valery I. Kharlamov and Tigran A. Vagramyan |
| Elastic Copper- and Nickel-based Composite Coating, Jun - 2005, Sergey S. Kruglikov, Elena A. Tuzhilkina |
| Emerging Boron-Doped Diamond Electrode Technology in Wastewater Treatment, Jun - 2005, |
| Overview of the Midos Process for Spontaneous Metal Deposition, Jun - 2005, Jingye Li, Matthew O'Keefe and Thomas O'Keefe |
| Surviving a NADCAP Audit – 10 Simple Rules, Jun - 2005, Lisa Fostveit and Milton F. Stevenson, Jr. |
| Electrochemical Removal of Beryllium from Acid Process Solutions, Jun - 2005, Sergey S. Kruglikov, Dmitri Yu. Turaev, Nadezhda Kolotovkina |
| The Do's & Don'ts of Trivalent Passivation Processes (Thick & Thin Film), Jun - 2005, Michael Wyrostek |
| Plating Shop Bath Life Extension for Removing Solids, Jun - 2005, Paul Brezovec, CEF, and Leanne Debias |
| Trouble Shooting the Unknown, Jun - 2005, Ralph V. Dixon |
| Troubleshooting of Electrolytic Color Anodizing of Aluminum, Jun - 2005, Bob Srinivasan |
| Troubleshooting Decorative Chromium Solutions, Jun - 2005, Anthony J. Varuolo |
| Troubleshooting Filters in Plating Shop, Jun - 2005, |
| Servicing a Hard Chromium Plating Operation, Jun - 2005, Ray Kern |
| Why your waste treatment system does not work, Jun - 2005, John C. Welkie |
| Surface Finishing Facility Commissioning: Bridging Facility Design and Construction with Facility Operations and Maintenance, Jun - 2005, Peter A. Gallerani, Jeffrey R. Lord and Glenn A. Zinkus |
| Overview of the U.S. Army Technology Demonstration for Prevention of Material Degradation Program, Jun - 2005, Robert B. Mason, Lawrence A. Gintert, and Mark F. Singleton, PhD & Don Skelton, |
| Evaluation of Advanced Coatings for Improved Performance on Military Hydraulic Equipment, Jun - 2005, Robert B. Mason, Martin Konrad, Paul Galbraith, and Mark F. Singleton, PhD & Don Skelton |
| BSAA Salt Spray Failure Troubleshooting, Jun - 2005, Fullen, Warren J. |
| What Your Chemical Supplier Should Tell You But Doesn't, Jun - 2005, Jack H Berg |
| Things to Review Before Your Next Rectifier Purchase, Jun - 2005, W. Boddison |
| Shop Talk---Finishers' Think Tank Revisited—VI, Dec - 2005, By John Laurilliard, CEF Compiled by Dr. James H. Lindsay, AESF Fellow |
| AESF Journals–Past, Present and Future, New Directions for a New Magazine and a New Journal, Dec - 2005, Dr. James H. Lindsay, AESF Fellow |
| Fact or Fiction?--Chemicals in Foods and Beverages, Dec - 2005, Jack W. Dini |
| Finishing Facts, Dec - 2005, |
| Finisher's Think Tank--The Right Additives for Bright Nickel Plating, Dec - 2005, Stephen F. Rudy, CEF |
| Advice & Counsel--Proper Titration Requires Skill, Dec - 2005, Frank Altmayer, MSF |
| Specifying Buffing Compound, Jan - 2005, William M. Schaffner |
| At Blum USA, Quality Finishing ""Hinges"" on Pretreatmen, Jan - 2005, Matthew J. Little |
| Plastic Man, Jan - 2005, Matthew J. Little |
| Calculating Corrosion , Jan - 2005, Markus Dahlhaus and Amy Tsang and Linda Wing |
| Test Methods For Evaluating Anodized Aluminum, Feb - 2005, Paul Lomax |
| What to do about Hard Chromium, Feb - 2005, Beverely A. Graves |
| Developing Racking and Production Strategies for Powder Coating, Mar - 2005, Lyle E. Gilbert |
| Automating the Barrel Finishing Process , Mar - 2005, Jerry Romito |
| Dirt Identification to Elimination, Mar - 2005, Joseph J. Subda |
| Life in the Fast Lane , Apr - 2005, Matthew J. Little |
| Striking Gold , Apr - 2005, Matthew J. Litlle |
| A Cool Technology , Apr - 2005, Matthew J. Little |
| In Control , May - 2005, Tom Quatsoe |
| A Look at Custom Masking , Jun - 2005, Matthew J. Little |
| Abrasive Blasting: Understanding the Basics of Media Selection, Jun - 2005, John C. Carson |
| Robot Saves on Labor Costs, Improves Quality, Jun - 2005, Matthew J. Little |
| Fine Tune Cleaning and Rinsing with Ultrasonic Retrofits, Jul - 2005, Cheryl Larkin |
| Tips for Improving Painting Lines , Jul - 2005, Bob McElroy and Harold Powers |
| PorterCorp Adds Color to the Great Outdoors , Jul - 2005, John Binder |
| A ""Fishy"" Philosophy , Jul - 2005, Matthew Little |
| A Current Affair: Examining the ""No Amperage"" Phenomenon , Aug - 2005, Craig Henry |
| Total Automation Finds a Total Solution, Aug - 2005, Matthew J. Little and Jennifer M. Kirtland |
| The Science of Small Grows BIG , Aug - 2005, Beverly A. Graves |
| Bobcat Company Improves Productivity and Quality with Custom Masks, Sep - 2005, Jennifer M. Kirtland |
| Palladium-Free Direct-Plate Technology for Plating on Plastics , Sep - 2005, Andreas Königshofen and Peter Pies and Brian Griffith |
| Not Your Average Recreational Powder Coating Facility , Sep - 2005, Beverly A. Graves |
| Avoid nickel plating losses , Sep - 2005, Bryan Fisher |
| Understanding Fluidized Bed Powder Coating, Part II, Oct - 2005, Lloyd Long and Ross Rector |
| The Basics of Vibratory Bowl Set-up, Oct - 2005, Bill Nebiolo |
| New Process Doubles Productivity for Auto Supplier , Oct - 2005, Jennifer M. Kirtland |
| Simulation Helps Overcome Paint Line Constraints , Nov - 2005, Jennifer M. Kirtland |
| The Hull Cell: Key to Better Electroplating, Nov - 2005, Ray Dargis |
| Improving First-Pass Transfer Efficiency , Dec - 2005, Harold Powers |
| Is In-house E-Coating Right For Your Company?, Dec - 2005, Lyle E. Gilbert |
| Reinventing Chrome Coatings , Dec - 2005, Klaus Brondum |
| MON MACT Impact , Dec - 2005, Mike Van Asten and Charles Martinson |
| Transforming Aerospace Metal Finishing Processes, Dec - 2005, Peter Gallerani and Kevin L. Klink |
| The Hull Cell: Key to Better Electroplating - Part II, Dec - 2005, Ray Dargis |
| Electro-Spark Deposited Coatings for Replacement of Chrome Electroplating, - 2005, Johnson, R. N. and Bailey, J. A. |
| Non Cyanide Alkaline Cooper Process, - 2005, Volk, Sigrid |
| Electroless Nickel / Immersion Gold Process Technology for Improved Ductility of Flex and Rigid-Flex Applications, - 2005, Kuldip Johal, Hugh Roberts, Sven Lamprecht, Christian Wunderlich |
| Implementing "Green" PCB production processes, - 2005, Sven Lamprecht, Günter Heinz, Neil Patton, Stephen Kenny, Patrick Brooks, Christoph Rickert, Dr. Jiangbo Liu |
| Reducing Air Pollution from: Electroplating Operations, - 2005, US EPA |
| Precious Metal Finishing Revisited, - 2005, Jones, T. |
| Electroplating, Plating, Polishing, Anodizing, and Coloring: 2002 , - 2005, U.S. Department of Commerce Economics and Statistics Administration U.S. CENSUS BUREAU |
| An Exploration of Patent Matters Associated With Emerging Technologies—Part 1 But … What Does Flight Have to do With It?, Feb - 2004, E. Jennings Taylor |
| Magnaplate Develops High Friction Coating For Decent Rate Limiter on Mars Explorer, Feb - 2004, |
| Some Production Plating Problems & How They Were Solved—Part 7, Feb - 2004, Contributed & edited by Dr. Samuel Heiman, Updated by Dr. James H. Lindsay, AESF Fellow |
| Innovative Regulatory Change Promotes Environment & the Bottom Line, Feb - 2004, |
| Advice & Counsel--Now You See It—Now You Don't, Rapidly Dissolving Anode Baskets Are Cause for Concern, Feb - 2004, Frank Altmayer |
| Fact or Fiction?--Cyanide and Gold Mining, Feb - 2004, Jack W. Dini |
| Rectifier Clinic--Spike Control for Rectifiers, Feb - 2004, Craig Henry |
| Finisher's Think Tank--Power to The People, Feb - 2004, Stephen F. Rudy, CEF |
| Finishing Facts, Feb - 2004, |
| Electroplating of Gold-Tin Alloys From a Sulfite-Citrate Bath, Feb - 2004, Y. Zhang & D.G. Ivey |
| Effects of Alloy Types On the Gloss of Anodized Aluminum, Feb - 2004, Y.-M. Wang, H.-H. (Harry) Kuo & S. Kia |
| Complex Chemistry & the Electroless Copper Plating Process, Feb - 2004, J. Li & P.A. Kohl |
| Update in Practical Cleaning Trends, Mar - 2004, Stephen F. Rudy, CEF |
| An Exploration of Patent Matters Associated With Emerging Technologies—Part 2 But … What Does Flight Have to do With It?, Mar - 2004, E. Jennings Taylor |
| Some Production Plating Problems & How They Were Solved—Part 8, Mar - 2004, Contributed & edited by Dr. Samuel Heiman, Updated by Dr. James H. Lindsay, AESF Fellow |
| Fact or Fiction?--Nitrates, Mar - 2004, Jack W. Dini |
| Advice & Counsel--Filtered Thoughts, Mar - 2004, Frank Altmayer |
| Rectifier Clinic--Rectifier Ripple, Mar - 2004, Craig Henry |
| Environmental Technology Verification for Metal Finishing Pollution Prevention Technologies (ETV-MF) Program, Feb - 2004, George Moore, Donn Brown & Scott Maurer |
| Effective Emergency Response Planning & the Consequences of an Incident, Feb - 2004, Steve Bold |
| EMIS: A Seamless Web Exchange for MSDSs, Feb - 2004, Andrew Rudnik |
| Reducing Waste, Making Money: Measuring the Impact of "Lean & Clean" Workshops At Suppliers Partnership for the Environment (SP) Member Sites, Feb - 2004, Daniel D. Luria |
| Assisting Indiana Electroplaters Develop and Implement an Environmental Management System (EMS), Feb - 2004, Shayla S. Barrett |
| The U.S. EPA's Metal Finishing Facility Pollution Prevention Tool (MFFP2T), Feb - 2004, William Barrett, Ph.D., P.E., and Paul Harten, Ph.D. |
| Non-Line-of-Sight (NLOS) Hard Chromium Alternatives Status Report, Feb - 2004, T. Naguy, J. Kolek, and Dr. E. Brooman |
| A Study on Friction and Wear Characteristics of NANON-9, A Chrome-Alternative Electrodeposited Nanocrystalline Coating Plated on High-Strength Steel, Feb - 2004, Wenhua Hui, PhD, & Rick Richardson, CEF-4 |
| Functional Trivalent Chromium Plating: An Alternative to Functional Hexavalent Chromium Plating, Feb - 2004, R.P. Renz, CEF, J.J. Fortman, Ph.D., and E.J. Taylor, Ph.D. |
| Replacing Chromates, Feb - 2004, Woody Allen, P.E., Nancy Heimann & Wayne Soucie |
| Evaluation of Nano-Composite Coatings as Environmentally Acceptable Alternatives to Hard Chromium Plating, Feb - 2004, M.L. Klingenberg, E.W. Brooman and T.A. Naguy |
| End of Life Vehicle Regulations and Automotive OEM Specifications Requirements for Product Content Reporting—Influence on a Tier 1 Automotive Supplier, Feb - 2004, Rebecca M. Spearot and Vijay P. Tandel |
| IPC Material Declaration Guidelines Project, Feb - 2004, John Sharp |
| International Material Restrictions and Metal Finishing, Feb - 2004, Tim Greiner, Vesela Veleva, Elizabeth Harriman & Todd MacFadden, |
| Integration of Chemistry with Equipment Improves Process and Environment, Feb - 2004, Donald L. Snyder & Dennis Dumsha |
| Electrochemical Regeneration of Acid Copper Etchants, Feb - 2004, Dr. Sergey S. Kruglikov, Dmitri Yu. Turaev |
| A Comprehensive Test of the Effect of a Fume Suppressant Used in Hard Chromium Electroplating on Emissions Quality, Worker Exposure, and Product Quality, Feb - 2004, |
| The Role of Advanced Sensing Technologies in Pollution Prevention, Feb - 2004, William M. Gutman, James G. Moran, and J. Richard Sena |
| Electrodeposition of High Quality Nickel Phosphorous Alloys for Pollution Reduction and Energy Conservation, Feb - 2004, Darell Engelhaupt and Brian Ramsey |
| Solvent Cleaning in Today's Environment, Feb - 2004, Joe McChesney |
| Effect of Organic Additives On the Mechanical Properties of Copper Electrodeposits, Feb - 2004, C.H. Huang, W.H. Liou, C.H. Lee, W.Y. Shu, and H.M. Wu |
| Electroless Nickel Technology Formulated Without Lead & Cadmium: An Overview of the Performance Characteristics, Feb - 2004, Dr. Alan J. Ruffini |
| Effectively Using Non-Chelating Materials in Mass Finishing Compounds, Feb - 2004, Andrew Kuuttila |
| Challenge and Experience with Implementation of New Wastewater Treatment/Water Reuse Process, Feb - 2004, Rudy Macko & Maritsa Goan |
| Recycling of ECM Metal Hydroxide, Feb - 2004, Terry Lievestro |
| Liquid Penetrant Degradation System, Feb - 2004, Danielle Miousse, Ph.D., CEF & Fabienne Biasotto, Ph.D., Serge Labbé, M.Sc., CEF-4 |
| Air Force Efforts to Identify and Evaluate Emerging Technologies, Feb - 2004, T. Naguy and J. Kolek |
| High-Strength Steel Joint Test Protocol For Validation of Alternatives to Low Hydrogen Embrittlement Cadmium For High-Strength Steel Landing Gear and Component Applications, Feb - 2004, Susan B. Van Scoyoc, Tom Naguy, Dr. Joseph Osborne, Ed A. Babcock & Stephen Gaydos |
| Engineered Applications of ElectroSpark Deposition (ESD) For Component Repair, Feb - 2004, Norma Price |
| DOD Initiatives to Rapidly Transition Advanced Coating & Surface Finishing Technologies for Military Turbine Engine Manufacture and Repair, Feb - 2004, Charles H. Alford |
| Rinsewater Reduction Calculator, Feb - 2004, Julie K. Unangst & Warren J. Fullen |
| Breakthrough Environmental and Safety Performance In Your Organization Using Six Sigma Methodology, Feb - 2004, Bob Iuliucci |
| Is Hexavalent Chromium Being Misreprensented?, Jan - 2004, Bill Corzine |
| Some Production Plating Problems & How They Were Solved—Part 6, Jan - 2004, Contributed by Stanley J. Beyer & edited by Dr. Samuel Heiman, Updated by Dr. James H. Lindsay |
| Advice & Counsel--Eductor 101, Jan - 2004, Frank Altmayer |
| Fact or Fiction?--Science by Press Release, Jan - 2004, Jack W. Dini |
| Finisher's Think Tank--Tips for Keeping Process Baths Optimal During Cold Weather, Jan - 2004, Stephen F. Rudy, CEF |
| Corrosion Behavior Of Electroplated Tin-Zinc Coatings, Jan - 2004, K. Wang, H.W. Pickering, & K.G. Weil |
| High Quality Copper-Nickel-Chromium Plating on Plastics: A Continuous Process & its Challenges, Jan - 2004, J.R. Arnold |
| Electrolytic Machining, Deburring & Polishing, Jan - 2004, D.G. Risko |
| Finishing Facts, Jan - 2004, |
| Finishing Facts, Mar - 2004, |
| A Low Cost Semiconductor Metallization/ Planarization Process, Mar - 2004, H. Dyar, E.J. Taylor, J. Sun, & M. Inman |
| Desirable Features of a Non-Chromate Conversion Coating Process, Mar - 2004, K. Sampath |
| Some Production Plating Problems & How They Were Solved—Part 9, Apr - 2004, Contributed & edited by Dr. Samuel Heiman, Updated by Dr. James H. Lindsay, AESF Fellow |
| Fact or Fiction?--Good Air--Bad Press, Apr - 2004, Jack W. Dini |
| Advice & Counsel--EU Regs are Tough on Nickel, Apr - 2004, Frank Altmayer |
| Finisher's Think Tank ‐ Rejects & Inattention—Simply Priceless, Apr - 2004, Stephen F. Rudy, CEF |
| In-Process Recycling of Rinse Water From Copper Plating Operations Using Electrical Remediation, Apr - 2004, H.M. Garich, R.P. Renz, CEF, E.J. Taylor, & J.J. Sun |
| Ultra-thin PdCo/Au Surface Finishes For Electronic Packaging, Apr - 2004, C. Fan, C. Xu, E.J. Kudrak & J.A. Abys |
| Study of PTFE Content & Anti-Corrosion Properties of Electroless Ni-P-PTFE Coatings, Apr - 2004, Y. Liu & Q. Zhao |
| Finishing Facts, Apr - 2004, |
| Electrochemical Metal Removal —Aligning the Field and the Forum, May - 2004, Phillip Miller & David Ku |
| Some Production Plating Problems & How They Were Solved—Part 10, May - 2004, Contributed & edited by Dr. Samuel Heiman,Updated by Dr. James H. Lindsay, AESF Fellow |
| Advice & Counsel--Stoichiometry & DTC, May - 2004, Frank Altmayer, MSF |
| Fact or Fiction?--Arsenic, May - 2004, Jack W. Dini |
| Finisher's Think Tank ‐ Help with Plating Problems—Keep it Easy, May - 2004, Stephen F. Rudy |
| Finishing Facts, May - 2004, |
| The Corrosion Behavior Of Nanocrystalline Electrodeposits, May - 2004, S.H. Kim, U. Erb, & K.T. Aust, F. Gonzalez & G. Palumbo |
| The Protection of Silver Against Atmospheric Attack, May - 2004, P-A. Gay, P. Berçot & J. Pagetti |
| Surface Nanocomposites Prepared By Electroless Plating, May - 2004, G. Jiaqiang, L. Lei, S. Bin, H. Wenbin & D. Wenjiang |
| Nanotechnology—From Electronics to Sunscreen, Jun - 2004, Phillip Miller & Francisco Gonzalez |
| Some Production Plating Problems & How They Were Solved—Part 11, Jun - 2004, Contributed & edited by Dr. Samuel Heiman,Updated by Dr. James H. Lindsay, AESF Fellow |
| Mexico Job Shop Celebrates Golden Anniversary, Jun - 2004, |
| Advice & Counsel--Interpreting CASS Results, Jun - 2004, Frank Altmayer, MSF |
| Finisher's Think Tank ‐ Beat the Heat ‐ Keep it Cool, Temperature can affect process performance, Jun - 2004, Stephen F. Rudy |
| Fact or Fiction?--Children and Risks, Jun - 2004, Jack W. Dini |
| More of Those Elusive Little Amperes ‐ Part I, Jun - 2004, V.E. Guernsey & J. Guernsey |
| Reduction of Silver Ions With Polyhydroxy Alcohols, Jun - 2004, Stojan S. Djoki? |
| Electrodeposition of Zinc From an Alkaline Non-cyanide Bath: Influence of a Quaternary Aliphatic Polyamine, Jun - 2004, V. Zúñiga, R. Ortega, Y. Meas, and G. Trejo |
| Finishing Facts, Jun - 2004, |
| Canadian Company is Engineering Innovative Materials For the Future Of Metal Finishing, Jul - 2004, James H. Lindsay, AESF Fellow |
| MEMS Technology—The Fusion of Chemistry, Electronics, & Mechanics, Jul - 2004, Phillip Miller & Dr. Pat Mentone |
| What Immigration Reforms Mean to Finishers, Jul - 2004, Woodruff Imberman & Mariah DeForest |
| Some Production Plating Problems & How They Were Solved—Part 12, Jul - 2004, Contributed & edited by Dr. Samuel Heiman,Updated by Dr. James H. Lindsay, AESF Fellow |
| Finishers Suffer When EPA Region IX Takes Different View of RCRA Exemptions, Jul - 2004, Stephen A. Johnson & David G. Lickteig |
| Advice & Counsel--Falling In STEP, Jul - 2004, Frank Altmayer, MSF |
| Fact or Fiction?--Mother Nature & Pre-Industrial Revolution Man Are/Were Also Polluters, Jul - 2004, Jack W. Dini |
| Finisher's Think Tank--Some Nickel Plating Considerations, Jul - 2004, Stephen F. Rudy |
| More of Those Elusive Little Amperes ‐ PART II, Jul - 2004, V.E. Guernsey & J. Guernsey |
| Anodized Aluminum Oxide Membranes As Templates for Nanoscale Structures, Jul - 2004, C.Y. Han, Z.L. Xiao, H.H. Wang, G. A. Willing, U. Geiser, U. Welp, W.K. Kwok, S.D. Bader & G.W. Crabtree |
| The Tribological Behavior Of Electroless Ni-P-SiC (Nanometer particles) Composite Coatings, Jul - 2004, X. Huang, Y. Wu & L. Qian |
| Finishing Facts, Jul - 2004, |
| The Synergy Between the Research Board & The Emerging Technologies Committee, Sep - 2004, Phillip Miller & Dr. E. Jennings Taylor |
| Some Production Plating Problems & How They Were Solved—Part 13, Sep - 2004, Contributed & edited by Dr. Samuel Heiman,Updated by Dr. James H. Lindsay, AESF Fellow |
| Cyanide Incident Results in Death At Indiana Plating Shop, Sep - 2004, Martha S. Martin, CEF-4, CECM |
| Advice & Counsel--In the Thick of Things, Measuring Plating Thickness Has Many Variables, Sep - 2004, Frank Altmayer, MSF |
| Fact or Fiction?--Of Mice And Men, Sep - 2004, Jack W. Dini |
| Finisher's Think Tank--A New Twist to an Old Song, Organic Film Technology Offers Improvements for Pretreatment, Sep - 2004, Stephen F. Rudy |
| Pulsed Deposition of Ultra-thin Copper Foils, Sep - 2004, Chein-Ho Huang, Wen-Yung Shu, Hsien-Ming Wu, and Chin-Ho Lee |
| The Process and Mechanism of Electrodepositing a Zn-Fe-SiO2 Composite Coating, Sep - 2004, Y. Zhang, Y. Fan, X. Yang, Z. Chen & J. Zhang |
| Solvents for Ultrasonic Cleaning, Sep - 2004, Bogdan Niemczewski |
| Case Studies of Blistering Problems in Zinc-plated Steel and Zinc-plated Die-cast Zinc Alloy Parts, Sep - 2004, Z. Panossian & J.V. Ferrari |
| Finishing Facts, Sep - 2004, |
| Corrosion Behavior of Tin-Zinc Alloy Electrodeposited Coatings on Steel, Jun - 2004, Eric Maurer, Howard W. Pickering and Konrad Weil |
| Development of a Plating Process for Deposition of Zn-Ni-X (X=Cu, Cd, P) Alloys as a Replacement for Cadmium Coatings, Jun - 2004, Swaminatha P. Kumaraguru, Prabhu Ganesan and Branko N. Popov |
| Residual Stress and Magnetic Properties of Nickel, Cobalt, Iron and FeCo Electrodeposits, Jun - 2004, S, Kelcher, D.-Y. Park, and N. V. Myung |
| Novel Non Chrome Process for the Protection of Zinc Coatings, Jun - 2004, Swaminatha P Kumaraguru, Branko N. Popov |
| Consistency of Electrolytic Nickel Processes for Optimum Performance, Jun - 2004, Donald L. Snyder & Dennis Dumsha |
| RINSING FOR RECOVERY, EFFICIENCY AND BETTER WORK, Jun - 2004, Jeffrey F. Kubiak |
| Nickel Iron Plating, Jun - 2004, Anthony J. Varuolo |
| Electrolytic Rack Stripping, Jun - 2004, Ralph V. Dixon |
| It's Your Nickel – So, Save It! Compliance and Waste Minimization for Today and Beyond, Jun - 2004, Julie C. Rogers, P.C. |
| A Novel Brightener System for Decorative Nickel Plating, Jun - 2004, Leonard L. Diaddario, Jr. & Brad Proper |
| Advancement in the Control and Prediction of CASS Test Performance, Jun - 2004, Markus Dahlhaus, Amy Tsang & Linda Wing |
| "Chromium Recovery and Minimization in Industrial Surface Treatment Processes", Jun - 2004, Dr. Xavier Albert Ventura |
| Recovery of Hexavalent Chromium From Plating Wastewaters Using A-LIX TM, Jun - 2004, H.N. Conkle, T.A. Ganey, S.P. Chauhan, V.V. Gadkari, and P.J. Usinowicz |
| Process for plating on ABS resin using of electroless copper plating solution using saccharides as reducing agent, Jun - 2004, Jun Okada, Makoto Imamura, Kazuya Satoh and Kuniaki Ohtsuka |
| Electroless Deposition of Bright/Black Pure Nickel Films from Simple Solution Consists of Nickel Acetate and Hydrazine, Jun - 2004, S. Yae, K. Ito, T. Hamada, N. Fukumuro, and H. Matsuda |
| Lead and Cadmium free Electroless Nickel for End-of-Life Vehicle Directive, Jun - 2004, Dr. Agnes Rousseau and George E. Shahin C.E.F |
| Lead-free Electroless Nickel by Induction Heating, Jun - 2004, A. Möbius, C. Werner |
| Properties of Electroless Nickel/PTFE Deposits with New Wetting Agents, Jun - 2004, David Crotty, Ph.D., & Duncan Beckett |
| Extending the Operating Life of Electroless Nickel by Chemical Means, Jun - 2004, Helmut Horsthemke, & Stanley Zabrocky |
| Base Metal Microstructure Considerations For Aluminum Finishing, Jun - 2004, Jude Mary Runge |
| INTERFERENCE-COLORED FINISHES FOR AUTOMOTIVE ALUMINUM ALLOYS, Jun - 2004, Hong-Hsiang (Harry) Kuo, Yar-Ming Wang, Loreto Iglesia-Rubianes, Hsai-Yin Lee & Sheila F. Kia |
| Closed Feedback Loop Anodizing, Jun - 2004, Paul J. Yursis |
| The Effect of Non-Nitric and Non-Cyanide Pretreatment On the Corrosion Resistance of Electroless Nickel on Aluminum Alloys, Jun - 2004, George E. Shahin, C.E.F. |
| Making the Lead-free Transition: The Enigma of Tin Whiskers in Connector Applications, Jun - 2004, Sudarshan Lal and Thomas D. Moyer |
| Investigation on the Stability of a Au-Sn Electroplating Solution, Jun - 2004, A. He, Q. Liu and D.G. Ivey |
| Tin-Bismuth Pre-Plating Technology for Alloy 42 LeadFrames, Jun - 2004, J.-D. Kim, W.-S. Choi, K.-S. Park, E.-H. Kim, S.-B. Lee and H.-G. Kim |
| Sn and Sn-Bi Alloy Plating Solution Development for High-speed Applications, Jun - 2004, Victor Roev & Seok Gwang Doo, Joong-Do Kim & Woo-Suk Choi |
| Analysis and Control of Plating Baths Chromatography Vs CVS, Jun - 2004, Beverly Newton |
| Optimizing Reel-to-Reel Hard Gold Plating, Jun - 2004, Steven Burling & Steve Daniels |
| Alternative to Hexavalent Chromium Coatings: Decorative & Functional Trivalent Chromium Plating, Jun - 2004, Donald L. Snyder, Ph.D. |
| Alternatives to Functional Hexavalent Chromium Coatings: HVOF Thermal Spray, Jun - 2004, Keith O. Legg & Bruce Sartwell |
| Development of Reference Materials for Surface Technology in the Micrometer and Nanometer Range, Jun - 2004, W. Paatsch, U. Beck, M. Senoner |
| ACD Co-P Interlayers in Soldering with Tin Alloys for Microelectronics, Jun - 2004, P.L. Cavallotti, L. Lombardi, L. Magagnin, V. Sirtori |
| Microelectroforming for Medical Applications, Jun - 2004, Heidi Fauser, Andreas Zielonka |
| ElectroChemical Pattern Replication (ECPR) - metal printing for microelectronics, Jun - 2004, P. Möller, M. Fredenberg, P. Wiwen-Nilsson, L. Montelius, P. Leisner, M. Östling |
| Conversion Coatings for Aluminum and Magnesium, Jun - 2004, Don Baudrand, CEF |
| Conversion Coatings For Magnesium and its Alloys, Jun - 2004, John W. Bibber, Ph.D. |
| Sealing Method for Anodizing Aluminium and Hard Anodizing and Test For Seal Quality Of Aluminium, Jun - 2004, Dr. Xavier Albert Ventura |
| Application of Inorganic Silicon Sealer to Anodic Oxide Coating, Jun - 2004, Hideyuki Kanematsu, Shinji Fujimoto, Kiyoshi Nogi, & Takeo Oki |
| Electroplating of Polyamide (Nylon) for Automotive Applications, Jun - 2004, Donald L. Snyder |
| Delivering High Performance Automotive Corrosion Coatings Through The ELVD Conduit, Jun - 2004, John R. Kochilla, Craig V. Bishop, Jim Tyler & Paul C. Wynn |
| Plating from a Functional Trivalent Chromium Bath to Replace Hexavalent Chromium Plating, Jun - 2004, R.P. Renz, CEF, J.J. Fortman, Ph.D., and E.J. Taylor, Ph.D. |
| Improving the Corrosion Resistance of Hard Chromium by Using Periodic Cathodic Current, Jun - 2004, Julieta Torres-Gonzales, Patrick. Benaben |
| Automatic Control of the Solution in Trivalent Chromium Plating Process, Jun - 2004, Sergey S. Kruglikov, Vladimir N. Kudryavtsev, Dmitri Yu. Turaev & Vitali V. Kuznetsov |
| The Use of Anionic Membranes for the Removal of Cationic Impurities from Chromium Plating Solutions, Jun - 2004, Sergey S. Kruglikov, Dmitri Yu. Turaev |
| CAD Based Optimization of cCromium Plating Processes for cCmplex Parts, Jun - 2004, G. Nelissen, Bart Van den Bossche, Marius Purcar, Johan Deconinck, Leslie Bortels, |
| Quantitative & Localized Hydrogen Analysis of Electroplated Material, Jun - 2004, Paatsch W. & Hodoroaba V.-D. |
| EDUCTOR AGITATION FOR A NICKEL ELECTROPLATING INSTALLATION, Jun - 2004, C. PORTER and D.R. GABE |
| Conversion Coatings for Zinc Substrates from Acidic Solutions of Cr(III) Compounds, Jun - 2004, R. Sarmaitis, V. Dikinis, V. Rezaite, I.Demcenko |
| Tin-copper Alloys Electroplating from Thiourea Solutions, Jun - 2004, M. Bestetti, A. Vicenzo, I. Lombardi and P.L. Cavallotti |
| Characterization of the Growth of Titania Coatings Under Plasma Electrolytic Oxidation of Titanium, Jun - 2004, E. Matykina, P. Skeldon, G.E. Thompson |
| Biological Cleaning for Organic Coatings, Jun - 2004, Juan Hajdu & Joseph W. Green |
| The Pretreatment System: Chemistry & Controls, Jun - 2004, Charles G. Galeas, Jr. and Terrence R. Giles |
| Palladium-free Direct Plate Technology for Plating on Plastics without Electroless Chemistries, Jun - 2004, Andreas Königshofen, Peter Pies, Brian Griffith |
| Viable Chromium (VI) - Free Treatment for Aluminum, Jun - 2004, Graig Matzdorf and Bill C. Nickerson |
| A Direct Plate Process for ABS and ABS/PC without use of Pd Catalyst or High Chrome Etch, Jun - 2004, Jack McCaskie, Michael B. Clark,Jr., Jeff Crosby, Yves Rouger, Stephen Christian, Hu Duan |
| Duplex Zinc + Zinc-Tin Alloy Coating with High Corrosion Resistance, Jun - 2004, Sergey S. Kruglikov, Valery I. Kharlamov, Alex H. Serov. |
| A Study on the Effects of Inorganic Additives on the Properties of Zinc Electrodeposits, Jun - 2004, Jin-su Ryu, Yu-Taek Jeon, Young-Jin Lee |
| A Study on the Improvement of Surface Appearance in Electrogalvanized Steel Sheet, Jun - 2004, Yu-Taek Jeon, Young-Jin Lee, Hyun-Woon Oh |
| Roadmap for Functional Coatings and Surface Modification, Jun - 2004, Dr. Aviezer Israeli |
| Trends in Dispersion Coatings in Japan, Jun - 2004, Tadao Hayashi |
| Fe-Cr Compositionally Graded Films by Use of Electroplating, Jun - 2004, Sachio Yoshihara, Kenji Kubota, Namio Kudoh, Wataru Oikawa |
| Electroforming of Tool Inserts for Injection Molding of Optical or Microfluidic Components, Jun - 2004, Peter T. Tang, Thomas R. Christensen & Martin F. Jensen |
| Antimicrobial Evaluation and ESR Measurement of Aluminum Anodic Oxide Films Containing an Iodine Compound, Jun - 2004, Katsumi YOSHIDA, Kazuaki HASHIMOTO and Yoshitomo TODA, Matsufumi TAKAYA & Akihiro KONNO |
| Electroplated Nanostructures for Functional and Structural Applications, Jun - 2004, Uwe Erb, Cedric Cheung, Gino Palumbo, Andy Robertson, Francisco Gonzalez and Klaus Tomantschger |
| Advancing Microsystem Technologies Through Electroplated Nanostructures, Jun - 2004, Cedric Cheung, Mohammad R. Baghbanan and Uwe Erb, & Gino Palumbo |
| Development of Stable Baths for Electroplating CoFe and CoFeNi Soft Magnetic Thin Films, Jun - 2004, Yahui Zhang and Douglas G. Ivey |
| In Situ Electrochemical AFM Observation for Dissolution of Plated Copper in Aqueous Solution, Jun - 2004, Nobumitsu Hirai, Hideyuki Kanematsu, Toshihiro Tanaka & Takeo Oki |
| Electrochemical Alternatives to Traditional Mechanical Operations, Jun - 2004, David Ku |
| Edge and Surface finishing with ECM, Jun - 2004, Donald G. Risko |
| Electrically Mediated Processes for Industrial Applications, Jun - 2004, A. Bonifas, Dr. E.J. Taylor, Dr. M. Inman, J. Sun, & T. Lievestro |
| Electro Chemical Machining (ECM) Surface Characteristics, Jun - 2004, Terry Lievestro |
| How Can Electropolishing Help You?, Jun - 2004, George R. Vraciu |
| Electropolishing Iron-Cobalt-Vanadium Laminate Stacks to Improve Performance of Electrical Machinery, Jun - 2004, Andrew Kenny, Alan Palazzolo, Jason Preuss, and Kevin Konno |
| New Methods Used to Evaluate Surface Corrosion Resistance, Jun - 2004, Gary Henrich |
| Marketing ‐ The New Sales Paradigm, Jun - 2004, Brooke Fix |
| Control Utility Cost and Max Savings, Jun - 2004, John M. Studebaker, Ph.D. |
| Continuing to control your shop with a Shop Management Software program and the new technologies being made available, Jun - 2004, Ira Handelsman |
| CLEANER PRODUCTION EVALUATION MODEL FOR SURFACE FINISHING PLANTS, Jun - 2004, Arnesh Telukdarie, Chris Brouchart, Yinlun Haung |
| Pumped Flow Eductor Agitation of Electroplating and Associated Solutions, Jun - 2004, Huw Williams |
| Various Plating Metals & Their Antimicrobial Effect, Jun - 2004, Hajime Ikigai, Hideyuki Kanematsu, Yasushi Kikuchi, & Takeo Oki |
| ‘L-CELL' - A NOVEL DEVICE FOR PLATING PROCESS DIAGNOSTICS, Jun - 2004, Eugene Malyshev and Uziel Landau |
| Simulation of Thickness Distribution of Electrodeposition Coating, Jun - 2004, Katsuhiko OHARA |
| 3 Dimensional Large Scale Current Distribution Analysis -Cu, Ni, and Cr Plating on Plastics, Jun - 2004, Katsuhiko OHARA, Yutaka SUGIURA and Hidekazu KANEDA |
| Electrodeposition of Zn-Mg Alloy from 1-Ethyl-3-Methylimidazolium Bromide Organic Molten Salt, Jun - 2004, Hiroaki YAMAMOTO, Hiroshi SHIRAI, Koichiro KOYAMA |
| Development of Nanostructured Electrodes for Fuel Cells Using Pulse Electrodeposition, Jun - 2004, Swaminatha P. Kumaraguru, Hansung Kim and Branko N. Popov |
| Nanostructured Zn-Ni Alloys by Pulse Electrodeposition, Jun - 2004, Prabhu Ganesan, Swaminatha P Kumaraguru and Branko N. Popov |
| Finishing Facts, Jan - 2004, |
| Spontaneous Electrochemical Deposition of Gold Coatings from Organic Solutions, Jan - 2004, E. Dahlgren, J. Sun, T.J. O'Keefe & M.J. O'Keefe |
| Electrodeposition and Characterization of Films of CoP, Jan - 2004, K. Mondal, N. Sathitsuksanoh & Shashi B. Lalvani |
| Innovation & Emerging Technologies: Technical Marketing and the Innovation Landscape—Lessons from a Hardened Marketing Geek, Oct - 2004, Phillip Miller & Amy Luther |
| Shop Talk: Some Production Plating Problems & How They Were Solved—Part 14, Oct - 2004, Contributed and edited by Isidore Cross Updated by Dr. James H. Lindsay, AESF Fellow |
| Washington Report: Government Relations Update for Finishers, Oct - 2004, Christian Richter & Jeff Hannapel |
| AESF Special Information: It's About the Money, Oct - 2004, Ken Gatchel |
| Advice & Counsel: What is RoHS?, Oct - 2004, Frank Altmayer, MSF |
| Fact or Fiction?--The 10/90 Gap, Oct - 2004, Jack W. Dini |
| Electrodeposition of Alloys and Composites with Superior Corrosion and Electrocatalytic Properties, Oct - 2004, Prof. Branko N. Popov |
| Finisher's Think Tank--RoHS is Coming, Oct - 2004, Stephen F. Rudy, CEF |
| Finishing Facts, Oct - 2004, |
| The Measurement of Internal Stress of Electroplated Deposits, Oct - 2004, David Crotty |
| Electrocodeposition of Nanocomposite Films, Oct - 2004, Jan B. Talbot |
| The Hardness of Fe-Ni-P Alloy and Fe-Ni-P-Si 3 N 4 Composite Coatings, Oct - 2004, Liang Hui & Zhang He-ling |
| Shop Talk: Some Production Plating Problems & How They Were Solved—Part 15, Nov - 2004, Contributed and edited by Arthur M. Linn Updated by Dr. James H. Lindsay, AESF Fellow |
| It's About the Money: The Discussion Continues …, Nov - 2004, Ken Gatchel |
| Advice & Counsel: Evaluating a Plating Line, Nov - 2004, Frank Altmayer, MSF |
| Finisher's Think Tank--What Happens Tomorrow?, Nov - 2004, Stephen F. Rudy, CEF |
| Fact or Fiction?--Junk Science, Nov - 2004, Jack W. Dini |
| Finishing Facts, Nov - 2004, |
| Electroless Ni-P/Pd/Au Plating for Semiconductor Package Substrates, Nov - 2004, Kiyoshi Hasegawa, Akio Takahashi, Takaaki Noudou & Akishi Nakaso |
| Micro-roughening of Epoxy and Cyanate Ester Laminates as a Precursor to Electroless Plating, Nov - 2004, Dr. Gregory L. Young |
| On the Oxidation of Tin(II) in Methanesulfonate Solutions and the Role of Trace Chloride, Nov - 2004, Nicholas M. Martyak and Robert Seefeldt |
| Electroless Nickel as a Preplate for Aluminum Alloy Wheels, Nov - 2004, Dai Chang-song, Wang Dian-long, Hu Xin-guo and Wang Kun |
| Reader Comments, Dec - 2004, |
| Innovation & Emerging Technologies: Technology Screening, Analysis and Management, Dec - 2004, Eric W. Brooman, Ph.D, AESF Fellow |
| Shop Talk: Some Production Plating Problems & How They Were Solved—Part 16, Dec - 2004, Contributed and edited by Dr. Samuel Heiman & John J. Laurillard, CEF Updated by Dr. James H. Lindsay, AESF Fellow |
| Post Election Analysis: Election Favors Republicans But Chrome Remains Under Pressure, Dec - 2004, Christian Richter |
| Surface Finishing Letter to OSHA, Dec - 2004, |
| The "Future of Finishing:" What's Your View?, Dec - 2004, Christian Richter |
| Advice & Counsel: Test Finished Parts for Hex Chrome, Dec - 2004, Frank Altmayer, MSF |
| Fact or Fiction?--New Report on Toxins, Dec - 2004, Jack W. Dini |
| Finisher's Think Tank--Nickel—It's Expensive, But In Demand, Dec - 2004, Stephen F. Rudy, CEF |
| Finishing Facts, Dec - 2004, |
| Interference-Colored Finishes for Automotive Aluminum Alloys, Dec - 2004, Hong-Hsiang (Harry) Kuo, Yar-Ming Wang, Loreto Iglesia-Rubianes, Hsai-Yin Lee & Sheila F. Kia |
| Comparison of Nickel Methanesulfonate and Nickel Sulfamate Electrolytes, Dec - 2004, Nicholas M. Martyak and Robert Seefeldt |
| Determination of Copper and Zinc Contents in Brass Plating Solutions by Titrimetric Analysis: A Review, Dec - 2004, Z. Panossian, J.V. Ferrari & M.B. de Almeida |
| Rinsewater Reduction Calculator, Dec - 2004, J.K. Unangst & W.J. Fullen |
| Composites Industry Paint Technology Advancements, Jan - 2004, David White |
| Eyeing Robotics?, Jan - 2004, Matthew Little |
| The Ekon-omy of Pretreatment, Jan - 2004, Matthew Little |
| Troubleshooting Zinc Electroplating Baths In the Laboratory, Feb - 2004, Richard E. Painter |
| Automation: To What Degree?, Feb - 2004, Nordson Corporation, Liquid Finishing Systems |
| Silver Bullet, Feb - 2004, Matthew Little |
| Walking on Air, Feb - 2004, Lyman Thornton |
| Efficient Electrocoat Tank Operation, Mar - 2004, Joseph J. Subda |
| Barrel Plating Blues, Mar - 2004, Frank Altamyer |
| C.I.L. ‐ Where Tradition Meets Today , Mar - 2004, A. Graves |
| Overcoming Nickel Plating Problems, Apr - 2004, Matthew Little |
| Powder Coating: Keeping Racks Clean, Apr - 2004, Scott Heran |
| Mass Finishing for Delicate Parts, Apr - 2004, Dan Cassino |
| UV Coating Technology on the Rise, Apr - 2004, Matthew Little |
| UV-Curable Basecoats and Clearcoats for Automotive Lighting, Apr - 2004, Eileen Weber and Phil Abell |
| Coating Heat Sensitive Substrates Can Expand Your Business, Apr - 2004, Susan Mitchell |
| Automotive Applications of UV-Cured Coatings, Apr - 2004, Kevin Joesel |
| The Burn that STILL Burns, Part 1 , May - 2004, V. E. Guernsey and Dr.-Ing N.V. Mandich |
| The ABC's of Success…, May - 2004, Mathew J. Little |
| The Burn that STILL Burns, Part 2 , Jun - 2004, V. E. Guernsey and Dr.-Ing N.V. Mandich |
| The Burn that STILL Burns, Part 3 , Jul - 2004, V. E. Guernsey and Dr.-Ing N.V. Mandich |
| Putting The Brakes On Lead and Cadmium, Jul - 2004, Beverly A.Graves |
| E-quation for Success , Jul - 2004, Barnie Haen and Joseph J. Subda |
| Manual Phosphating , Aug - 2004, Ron Ascenzo and Bob Bodak |
| Printed Circuit Boards: Final Finish Options, Aug - 2004, Donald E. Walsh, George Milad and Donald Gudeczauskas |
| True Blue , Sep - 2004, Matthew J. Little |
| Head of the Class , Sep - 2004, Mathew J. Little |
| Understanding Fluidized Bed Powder Coating, Oct - 2004, Lloyd Long and Ross Rector |
| Thermal Energy Deburring Heats Up, Oct - 2004, Thomas K. Brockbank |
| Optimizing Paint Durability, Part I, Nov - 2004, George Shaw |
| Questions for the Ages, Nov - 2004, Steve Chojnacki |
| A Baffling Development, Nov - 2004, Bob McElroy |
| Plating for Growth, Nov - 2004, Matthew J. Little |
| Jewel of Niles, Nov - 2004, Matthew J. Little |
| Optimizing Paint Durability, Part II, Dec - 2004, George Shaw |
| Network Advantage, Dec - 2004, Matthew J. Little |
| Do It Yourself, Dec - 2004, Matthew J. Little |
| Validation of HVOF WC/Co Thermal Spray Coatings as a Replacement for Hard Chrome Plating on Aircraft Landing Gear, - 2004, Sartwell, Bruce D. and Legg, Keith O. and Schell, Jerry and Sauer, John and Natishan, Paul |
| Replacement of Chromium Electroplating on Aircraft Landing Gear Using HVOF Thermal Spray Technology, - 2004, Bruce Sartwell |
| Replacement of Chromium Electroplating on C-2, E-2, P-3 and C-130 Propeller Hub Components Using HVOF Thermal Spray Coatings, - 2004, Sartwell, Bruce D. ; Legg, Keith O. ; Nardi, Aaron ; Kestler, Robert ; Assink, Warren |
| Magnetic Induction Machines Embedded in Fusion-Bonded Silicon, - 2004, Arnold, David P. and Cros, Florent and Zana, Iulica and Allen, Mark G. and Das, Sauparna and Lang, Jeffrey H. |
| Replacement of Chromium Electroplating on Aircraft Landing Gear Using, - 2004, Bruce D. Sartwell |
| Replacement of Chromium Electroplating on Propeller Hubs Using HVOF Thermal Spray Technology, - 2004, Bruce D. Sartwell |
| Thick Capacitive Meshes on Polyimide Substrates, - 2004, Lueker, Arne and Sternberg, Oren and Hein, Herbert and Schulz, Joachim and Moeller, Karl-Dieter |
| Reduced Air Emissions for Hard Chrome Plating at the NADEP NAS North Island, San Diego Using an Alternative Emission Control Technology, - 2004, Hutchins, Terry |
| Replacement of Chromium Electroplating on Propeller Hubs Using HVOF Thermal Spray Technology, - 2004, Sartwell, Bruce and Legg, Keith |
| High Performance Galvanising of Mass Articles in a Centrifuge , - 2004, Rolf Jansen |
| Substitution of Cr (VI) - containing chromate coatings by the European automobile industry, - 2004, INDIA SURFACE FINISHING |
| Electroless Nickel / Electroless Palladium / Immersion Gold Plating Process for Gold and Aluminum-Wire Bonding Designed for High-Temperature Applications, - 2004, Hugh Roberts, Sven Lamprecht, Kuldip Johal |
| Electroless Nickel / Electroless Palladium / Immersion Gold Process For Multi-Purpose Assembly Technology, - 2004, Hugh Roberts, Kuldip Johal, Sven Lamprecht |
| Immersion Tin - Kinetics of Whisker growth, - 2004, Sven Lamprecht, Carl Hutchinson |
| Size Control of Anodic Alumina Oxide Layer by an Anodic Oxidation Method for the Application of Magnetic Quantum Dots and Carbon Nanotubes, - 2004, Soo Ahn and Ji Hoon Kim and Kyoung Kyoung Nam Lee and Chae Ok Kim and Jin Pyo Hong_ |
| Continuous pH measurements in electroplating process baths improves cost-of-ownership at MTU Munich, Germany., - 2004, Mettler- Toledo GmbH |
| The 44th William Blum Lecture, Electrodeposition of Alloys and Composites with Superior Corrosion and Electrocatalytic Properties, - 2004, Prof. Branko N. Popov |
| Cross Into Chrome Free Pretreatment , Jan - 2003, Beverly A. Graves |
| On the Prowl(er) for High Standards , Jan - 2003, Matthew J. Little |
| Solutions at Work , Jan - 2003, Beverly A. Graves |
| Perspectives: Reconciling RCRA, Jan - 2003, Beverly A. Graves |
| Quality Finishing: Don't Starve Your Spray Gun for Air!, Jan - 2003, Steve Stalker |
| Quality Finishing: Cost Cutting Measures for Abrasive Finishing! , Jan - 2003, Greg Lucas |
| Managing Chemical Costs, Jan - 2003, Beverly A. Graves |
| Zinc Plating with Enthusiasm, Feb - 2003, Beverly A. Graves |
| Understanding Infrared Curing, Feb - 2003, Paul R. Horinka |
| Safe Exhaust Recirculation of Manned Spray Booths, Feb - 2003, Stephen P. Olivier |
| Fast and Flexible , Feb - 2003, Beverly A. Graves |
| Quality Finishing: Maximizing Electronics Plating Efficiency, Feb - 2003, |
| Quality Finishing: Troubleshooting Hexavalent Chromium Plating, Feb - 2003, |
| Stanrail Puts Painting on the Fast-Track, Mar - 2003, Matthew J. Little |
| The Real Cost of Not Maintaining Your Paint Pretreatment Washer, Mar - 2003, Eric Dill and Kim Markert |
| The Specifics of Architectural Anodizing, Mar - 2003, Beverly A. Graves |
| Surface Preparation Techniques for Large Parts, Mar - 2003, Beverly A. Graves |
| The Advantages of Thermal Spray, Apr - 2003, Klaus Dobler |
| Buffing Compound Application Methods, Apr - 2003, Greg Borrosch |
| Turning Off the Lights on VOCs, Apr - 2003, Matthew J. Little |
| Making the World a Brighter Place, Apr - 2003, John Binder, Harry Lader and Joe Schroeder |
| Quality Finishing: In-Depth Finishing Line Audits Can Improve the Bottom Line , Apr - 2003, Mark Foster & Rick Mott |
| Quality Finishing: Part I: Mechanical Finishing: A Review and New Technologies, Apr - 2003, Mark Cantwell |
| Cost-Effective Technologies for Meeting Effluent Limits, Apr - 2003, Ed Cote, P.E. |
| Coating Technology For Advanced Applications, May - 2003, Beverly A. Graves |
| New Final and Proposed Air Pollution Regulations, May - 2003, |
| Trends in the Automotive Industry Affecting Pretreatments, May - 2003, Mike Wichman |
| The End of Life Vehicle Directive and International Material Data System, May - 2003, Paul Wynn |
| Quality Finishing: Finishing is a Blast, May - 2003, Milt Stevenson, Sr. |
| Quality Finishing: Part II Mechanical Finishing: A Review and New Technologies, May - 2003, Mark Cantwell |
| True Temper Manages Every Detail to Stay on Top, May - 2003, Jennifer Kirtland |
| Low-Nickel Seal is Modern Solution, Jun - 2003, Ken Sigsbury |
| Guitar Finishes that Strike a Chord with Buyers, Jun - 2003, Matthew J. Little |
| Making Informed Choices, Jun - 2003, John Binder & Jeff Shutic |
| Part III Mechanical Finishing: A Review and New Technologies, Jun - 2003, Mark Cantwell |
| Keeping Up with Chromium MACT Standards, Jun - 2003, Wendell Turner |
| Mining for Efficiency, Jul - 2003, Matthew J. Little |
| Building a Custom Rack, Jul - 2003, Beverly A. Graves |
| Basics of Power Brush Selection, Jul - 2003, Imre Karetka |
| Zinc Phosphate: Questions and Answers, Jul - 2003, Imre Karetka |
| Putting Coatings to the Test, Jul - 2003, |
| Application Variables for Powder Coating Systems, Jul - 2003, Ken Kreeger |
| It's a Family Affair, Aug - 2003, Beverly A. Graves |
| Breakthrough in Total Closed Loop Recycling, Aug - 2003, Beverly A. Graves |
| Make Your Mark With The Powder Coated Tough Mark, Aug - 2003, |
| Powder Coating Expands Markets & Opportunities In The 21st Century, Aug - 2003, Greg Bocchi |
| Powder Coating Materials Offer a World of Colors Textures and Effects, Aug - 2003, Greg Bocchi |
| Powder Application Methods Offer Variety And Versatility, Aug - 2003, Greg Bocchi |
| Cutting-Edge Approaches to Coating Wood, Aug - 2003, Jeff Palmer |
| Antimicrobial Powder Coated Finish Resists & Reduces Germ Contamination, Aug - 2003, Jeff Palmer |
| Powder Coating: Transforming the Automobile Industry and Beyond, Aug - 2003, Jeff Palmer |
| Powder Coating Allows for Maximum Flexibility for Venerable Harley Davidson, Aug - 2003, Jeff Palmer |
| Knaack's Tool Boxes "Pick Up" Long-Term Appearance with Powder Coated Finish, Aug - 2003, Jeff Palmer |
| Special Coating System Keeps John Deere's Gator® Utility Vehicles Looking Good Under the Toughest Conditions, Aug - 2003, Jeff Palmer |
| Powder Coating Sets the Pace with Recumbent Bicycle Company, Aug - 2003, Jeff Palmer |
| US Blue Dot Uses Powder Coating to Stay on Course, Aug - 2003, Jeff Palmer |
| Changes South of the Border, Aug - 2003, Beverly A. Graves |
| Reproducible Decorative PVD Coatings, Sep - 2003, Michiel Eerden |
| The Road Ahead: An Interview with Toyota's Kevin Butt, Sep - 2003, Matthew J. Little |
| Great Balls of Fire!, Oct - 2003, Matthew J. Little |
| Gearing Up for Automotive Finishing, Oct - 2003, Beverly A. Graves |
| Automation in Mass Finishing: Get with the Program, Oct - 2003, Dan Cassino |
| Winding It All into One Line, Oct - 2003, Beverly A. Graves |
| Quality Filtration and Agitation Equals Quality Plating, Oct - 2003, Jack Berg |
| Legislative Relief on Health Insurance Costs, Oct - 2003, Jeffrey Hannapel |
| Large Plating Job Shop Survey, Nov - 2003, Beverly A. Graves |
| Electrocoat Earns an ' A ' , Nov - 2003, Matthew J. Little |
| ISO 14000: Environmental Management, Nov - 2003, Beverly A. Graves |
| Getting to Know Your POTW. It is a win-win situation…, Nov - 2003, Andrew Reyburn |
| Ultrasonic Cleaning Comes of Age, Nov - 2003, Brian Sutton |
| Crane Cams Delivers Performance, Jan - 2003, |
| Selection & Applications of Inorganic Finishes: Anodic Coatings for ‘Other' Metals*, Jan - 2003, Written by Fred Pearlstein, Updated by Dr. James H. Lindsay, AESF Fellow |
| Economy, Regulatory Issues & Globalization Top 2002 Challenges for Finishers, Jan - 2003, Christian Richter |
| Advice & Counsel: Bright Nickel Problems, Jan - 2003, Frank Altmayer |
| Rectifier Clinic: Buying a Used Rectifier, Jan - 2003, Craig Henry |
| Finisher's Think Tank: Cleaning Alternatives for Platers, Jan - 2003, Stephen F. Rudy, CEF |
| Fact or Fiction? Environmentalism & Culture, Jan - 2003, Jack W. Dini |
| Finishing Facts, Jan - 2003, |
| Influence of M12 Organic Additive On the Electrodeposition of Tin From an Acid Sulfate Solution, Jan - 2003, S. Bakkali, T. Jazouli, M. Cherkaoui, M. EbnTouhami, N. El Hajjaji & E. Chassaing |
| Mechanistic Study of Direct Copper Plating Using a Pd Catalyst & S Ligand, Jan - 2003, H.S. Chen, Y.J. Huang, & C.C. Wan |
| Energy Conservation In Hard Chromium Plating, Jan - 2003, Frank Altmayer |
| Electropolishing, Mar - 2003, Walter Schwartz, Updated Dr. James H. Lindsay |
| Central Florida Jobshop Specializes in Critical Finishes for Aerospace/Defense, Mar - 2003, |
| Passivation of Aerospace Stainless Parts With Citric Acid Solutions, Mar - 2003, Stephen P. Gaydos |
| Advice & Counsel: Is Sulfuric Acid Carcinogenic?, Mar - 2003, Frank Altmayer |
| Fact or Fiction? Chromium: Is It Really Bad for Us?, Mar - 2003, Jack W. Dini |
| Rectifier Clinic: Tapswitch Rectifiers, Mar - 2003, Craig Henry |
| Standards Report: ISO TC 107 Summary of Activities for 2002, Mar - 2003, Dr. George DiBari |
| Finisher's Think Tank: Additional Procedures & Tips For Analysis & Control, Mar - 2003, Stephen F. Rudy |
| Chromate-Free Conversion Coatings For Aluminum, Mar - 2003, Dr. John W. Bibber |
| Effect of 2,2'-dipyridine on Borate-Buffered Electroless Copper Deposition, Mar - 2003, Show-Chin Kou & Aina Hung |
| Tin Whisker Studies-Experimentation & Mechanistic Understanding, Mar - 2003, Rob Schetty |
| Finishing Facts, Mar - 2003, |
| Innovation & Commitment Keep Lincoln Plating Ahead of the Game, Apr - 2003, |
| Blackening of Metals, Apr - 2003, Written by Walter Schwartz, Updated by Dr. James H. Lindsay |
| A Strategic Goals Update: Data Shows Link Between Environmental & Economic Performance in Finishing, Apr - 2003, |
| Advice & Counsel: Ding Dong, the MP&M is Dead, Apr - 2003, Frank Altmayer |
| Rectifier Clinic: Powerstat (Variable Transformer) Rectifiers, Apr - 2003, Craig Henry |
| Fact or Fiction? "Environmentally Caused" Does Not Mean Caused by Industry, Apr - 2003, Jack W. Dini |
| Finishing Facts, Apr - 2003, |
| Electroless Gold Plating Using L-cysteine as Reducing Agent & its Deposition Mechanism, Apr - 2003, T. Takeuchi, Y. Kohashi, D.-H. Kim, * H. Nawafune, M. Tanikubo & S. Mizumoto |
| Emissivity of Titanium Oxide Powder Coating & Its Structure, Apr - 2003, H. Kanematsu * , N. Wada, & T. Oki |
| Non-Polluting Metal Surface Finishing Pretreatment & Pretreatment/Conversion Coating, Apr - 2003, David Ferguson, CEF * and Dr. Bruce Monzyk Battelle |
| Bio-contamination Control In Metal Surface Finishing Operations, May - 2003, W. John Fullen |
| Education & the Electroplating Industry, May - 2003, Dr. William Blum |
| Fact or Fiction: Particles & Exposure, May - 2003, Jack W. Dini |
| Advice & Counsel: A Batch of Trouble, Part 1: Wastewater Treatment Tips, May - 2003, Frank Altmayer |
| Finisher's Think Tank: More on Analysis & Control: Additional Procedures & Tips, May - 2003, Stephen F. Rudy |
| Rectifier Clinic: Switchmode Rectifiers, May - 2003, Craig Henry |
| Electropolishing of Copper Alloys in Phosphoric Acid Solutions with Alcohols, May - 2003, E. Pircher * , M. Ruíz Martínez, S. Hansal & W. Hansal |
| The Infl uence of "Light Green" Additive On the Anodizing of Aluminum In Sulfuric Acid, May - 2003, T. Dimogerontakis & I. Tsangaraki-Kaplanoglou * |
| CO 2 Laser-Induced Metal Deposition On Epoxy Resin Boards from Aqueous Solution, May - 2003, C. Chen,* J. Zheng, J. Liu, Z. Xu, H. Liu, & W. Huang |
| Finishing Facts, May - 2003, |
| Selection & Applications Of Inorganic Finishes: Metal Deposits, Feb - 2003, Fred Pearlstein, CEF, Updated by Dr. James H. Lindsay |
| Advice & Counsel: A Visit from Old Man "Whiskers", Feb - 2003, Frank Altmayer, MSF |
| The Insidious Nature Of Hydrogen Embrittlement, Feb - 2003, Jack L. Woods, CEF |
| Fact or Fiction? Beware of Statistics, Feb - 2003, Jack W. Dini |
| Finisher's Think Tank: Corrosion Testing Procedures & Alternatives, Feb - 2003, Stephen F. Rudy, CEF |
| Rectifier Clinic: Preventive Maintenance Checks, Feb - 2003, Craig Henry |
| Finishing Facts, Feb - 2003, |
| Nanotechnology Opportunities for Electroplating Industries, Feb - 2003, G. Palumbo, F. González , K. Tomantschger, U. Erb & K.T. Aust |
| Ni-W Alloy Electrodeposition From a Bath Containing an Organic Amine Substitute for Inorganic Ammonia, Feb - 2003, Yiyong Wu, Do-Yon Chang, Sik-Chol Kwon & Dongsoo Kim |
| Pulse Periodic Reverse Plating—Possibilities for Electrodeposition of Metal Coatings with Improved Properties: Part 2, Feb - 2003, M. Aroyo & N. Tzonev |
| Status Update for End-of-Life Vehicle (ELV) Directive; Replacement of Hexavalent Cr in Automotive Industry, Feb - 2003, Harish Bhatt |
| Implementation of the US Environmental Protection Agency's Metal Finishing Facility Pollution Prevention Tool (MFFP2T), Feb - 2003, William Barrett, Ph.D., P.E. and Paul Harten, Ph.D. |
| Conflicting Environmental Regulations, Feb - 2003, Barbara Kanegsberg & Ed Kanegsberg |
| Chromate-based Solutions Are Not Dumped Any More: Industrial Experience in Russia, USA & Germany, Feb - 2003, Dr. Sergey S. Kruglikov, Dmitri Yu. Turaev |
| Using Weak Acid Ion Exchange Resin to Neutralize & Remove Metals from Plating Rinsewaters – An Operational Perspective, Feb - 2003, Bruce Bishkin |
| Recycling Emulsified Oils Using Percentrifugation Technology, Feb - 2003, Danielle Miousse, Serge Alex & Bruno Ponsard |
| Advanced Oxidation Process to Decompose Oils & Greases, Feb - 2003, Danielle Miousse & Fabienne Biasotto |
| Air Emission Factors for Metals Finishing Operations, Feb - 2003, Glenn A. Zinkus |
| Zero Air Emissions for Hard Chrome Plating and Chromic Acid Anodizing Applications An Alternative Emission Control Technology, Feb - 2003, Terry W. Hutchins |
| Stifling Those Troublesome Fumes, Feb - 2003, Charles Schultz & Richard Crain |
| Treatment of Acid Wash Wastewater from Electropolishing Parts with Ultrafiltration—A Case Study, Feb - 2003, Richard S. Merryman |
| In-Process Treatment of Copper-CMP Wastewater Using Electrical Mediation, Feb - 2003, H.M. Krall, R.P. Renz, CEF, E.J. Taylor, PhD, & M.E. Inman, PhD |
| Effluent Polishing with Selective Ion Exchange Resins, Feb - 2003, Phil Fatula |
| Automatic Wax Collector Principles & Characteristics of the Machine, Feb - 2003, Douglas Tomkins & Dr. Martin Leduc |
| Electrodeposited Nanocrystalline Cobalt-Phosphorus Alloys ‐ An Advanced Alternative to Hard Chrome Plating for Non-Line of Sight Coating Applications, Feb - 2003, Jonathan L. McCrea, Gino Palumbo, Doug E. Lee, Uwe Erb, Maureen J. Psaila-Dombrowski |
| A Functional Trivalent Chromium Process to Replace Hexavalent Chromium Plating, Feb - 2003, R.P. Renz, CEF, J.J. Fortman, Ph.D., E.J. Taylor, Ph.D., & M.E. Inman, Ph.D. |
| Developing New Surface Engineering Processes, Feb - 2003, Craig V. Bishop, Dr. Charles W. McFarland |
| Quality Through Consensus Standards, Feb - 2003, Donald L. Snyder |
| Other Methods of Thickness Testing, Feb - 2003, Joe Cummings |
| Interpretation of Hull Cells, How & Why, Feb - 2003, Raymond G. Dargis |
| Integration of Quality, Environmental, and Health & Safety Standards Optimizing Business Improvement and Minimizing Risk: Recent Trends, Feb - 2003, Amy L. Carlson |
| A Comparison of Hexavalent & Trivalent Chromium for Use as a Base Material for Decorative PVD Coatings, Feb - 2003, Bryce R. Anton, George E. Shahin, CEF, Dr. Brajendra Mishra |
| NOVEL NON-CHROME PROCESS FOR PROTECTION OF ZINC COATINGS, Feb - 2003, Swaminatha P Kumaraguru, Basker Veeraraghavan, Bala Haran, Branko N. Popov, Bob Heimann |
| NON-ANOMALOUS NI-ZN COATINGS FOR THE CORROSION PROTECTION OF STEEL - AS A REPLACEMENT FOR CADMIUM COATINGS, Feb - 2003, Swaminatha P Kumaraguru, Basker Veeraraghavan, Bala S. Haran and Branko N. Popov |
| Deposition of Non-anomalous Ni-Zn-P Alloys for Replacement of Cadmium Coatings, Feb - 2003, Basker Veeraraghavan, Swaminatha P Kumaraguru, Bala Haran and Branko Popov |
| Nanoindentation studies of oxide aluminum-chrom carbide composite coating, Feb - 2003, Maksim Kireitseu |
| Getting Corrosion Protection from Aqueous Inhibiting Compounds, Feb - 2003, Andrew Kuuttila |
| Rheological Behaviour and Model of Metal-Polymer-Ceramic NanComposite, Feb - 2003, Maksim Kireitseu |
| Performance Validation of Thin-Film Sulfuric Acid Anodization (TFSAA) on Aluminum Alloys, Feb - 2003, Erin Beck |
| Trivalent Chromium-based Post-treatment for Sacrificial Coatings, Feb - 2003, Craig Matzdorf |
| Shop Talk: The Plater's Lament: Tell Me Why …*, Jun - 2003, Dr. Donald A. Swalheim, Updated by Dr. James H. Lindsay, AESF Fellow |
| Advice & Counsel: A Batch of Trouble, Part 2: Wastewater Treatment Tips, Jun - 2003, Frank Altmayer |
| Fact or Fiction: A Pesticide Mystery, Jun - 2003, Jack W. Dini |
| Finisher's Think Tank: Additional Procedures & Tips For Analysis & Control: Acid Dips & Pickles, Jun - 2003, Stephen F. Rudy |
| Direct & Pulse Current Electrodeposition of Iron Group Thin Film Alloys Containing Vanadium, Jun - 2003, M. Schwartz, C. Arcos & K. Nobe |
| Electrically Mediated Process For Functional Trivalent Chromium To Replace Hexavalent Chromium: Scale-up for Manufacturing Insertion, Jun - 2003, R.P. Renz, J.J. Fortman, E.J. Taylor & M.E. Inman |
| Anodic Oxide Finishes: Relating Engineering Performance To Microstructure & Hardness, Jun - 2003, M. Runge & A. Pomis |
| Finishing Facts, Jun - 2003, |
| Electrochemical Machining At Sermatech Is State of the Art In Metal Removal, Jul - 2003, |
| Shop Talk: Some Production Plating Problems & How They Were Solved—Part 1, Jul - 2003, By Dr. Samuel Heiman, Updated by Dr. James H. Lindsay, AESF Fellow |
| Advice & Counsel: A Batch of Trouble, Part 3: Wastewater Treatment Tips, Jul - 2003, Frank Altmayer |
| Fact or Fiction: Regulatory Abuse, Jul - 2003, Jack W. Dini |
| Rectifier Clinic: Chemical & Dirt Damage, Jul - 2003, Craig Henry |
| Evaluation of Electrolytic Nickel-Phosphorus Finish For Applications in Electronics, Jul - 2003, C. Fan, C. Xu, E.J. Kudrak & J.A. Abys |
| Effect of Processing Parameters On the Electroplating of Au-Sn Solders, Jul - 2003, S. Akhlaghi & D.G. Ivey |
| Corrosion of Copper in Acid-Sulfate Plating Baths with Additives, Jul - 2003, D. Hua & D. Barkey |
| Finishing Facts, Jul - 2003, |
| The Behaviour Of The Aluminium Pore In Anodizing Depending On The Electrolyte, Current Density & Time Agitation Of Micro Bubble, Jun - 2003, Dr. Xavier Albert Ventura |
| Analog circuit simulator as research tool for AC anodizing of aluminum, Jun - 2003, Toshihiko SATO |
| Electrolytic Coloring of Hard Anodized Aluminum Alloys, Jun - 2003, Leonid M. Lerner |
| Anodize Additives and Pulse Ramp Systems Optimizing the Chemistry and the Power, Jun - 2003, Fred Charles Schaedel |
| Facility Savings Opportunities Possible Through Utility Cost Reduction Strategies, Jun - 2003, John M. Studebaker, Ph.D. |
| Educational Java Games for Electroplaters, Jun - 2003, Toshihiko SATO |
| Anodized Aluminum Oxide Membranes as Templates for Nanoscale Structures, Jun - 2003, Catherine Y. Han, Z.L. Xiao, H.H. Wang, G A. Willing, U. Geiser, U. Welp, W.K. Kwok, S.D. Bader, and G.W. Crabtree |
| Is Barrier Layer Responsible for Cellular Structure Of Aluminum Oxide Film Anodized in Sulfuric Acid?, Jun - 2003, Dr. Moisey Lerner |
| Effects of Alloy Types on the Gloss of Anodized Aluminum, Jun - 2003, Yar-Ming Wang, Hong-Hsiang (Harry) Kuo, Sheila Kia |
| Role of Grain-boundary-free Energy & Surface-free Energy for Tin Whisker Growth, Jun - 2003, Kiyotaka Tsuji |
| Lead-Free Plating for Semiconductor Devices Production Qualification & Implementation, Jun - 2003, Anocha Sriyarunya, Rob Schetty |
| Synergistic Effects of Copper Plating Additives & Filter Type for Coil Plating in Write Heads, Jun - 2003, Saad Doss, Satinder Singh, Thomas E. Dinan and Leonora Balbuena |
| Topographical Observation of Tin Precipitation for Pulse Plating by Using SEM & AFM, Jun - 2003, Hideyuki Kanematsu, Nobumitsu Hirai, Toshihiro Tanaka & Takeo Oki |
| Non-uniform Microdistribution of Zinc-Nickel Alloy Electrodeposits & Its Effect on the Protective Properties of the Coatings, Jun - 2003, Dr. Sergei S. Kruglikov, Dr. Valeri I. Kharlamov |
| Rack Design & Maintenance for Decorative Automotive Applications, Jun - 2003, Donald Bauer |
| Periodic Pulse Reverse Opportunities In the General Metal Finishing Industry, Jun - 2003, John Kelly |
| Updating Anodizing Equipment, Jun - 2003, Drew Nosti, CEF |
| Long-time Stability of Electrochemical Ni-layers on Aluminium Applied with Different Pretreatments, Jun - 2003, Werner Pessenhofer, Bernhard Gollas, Jörg Albering, J.O. Besenhard |
| Tin Whiskers: Their Appearance & Minimization In Electronic Connectors, Jun - 2003, Dr. Sudarshan Lal, CEF |
| An Investigation into Methods for Minimising Tin Whisker Growth, Jun - 2003, Keith Whitlaw & Jeff Crosby |
| Novel Technique for Replenishing Tin & Controlling Tin Baths, Jun - 2003, William Copping |
| Nickel Coatings With Special Properties, Jun - 2003, Prof. Vladimir Kudryavtsev, T.E.Tsupak & K.I.Kryschenko |
| In-Process Recycling of Rinse Water from Copper Plating Operations Using Electrical Remediation, Jun - 2003, H.M. Krall, R.P. Renz, CEF, E.J. Taylor, Ph.D., & J.J. Sun |
| Electrically Mediated Process for Functional Trivalent Chromium to Replace Hexavalent Chromium: Scale-Up for Manufacturing Insertion, Jun - 2003, R.P. Renz, CEF, J.J. Fortman, Ph.D., and E.J. Taylor, Ph.D. |
| Pre-treatment of Exotic Plastics for an Ever-more Technically Demanding Customer, Jun - 2003, Mariola Brandes |
| High Quality Copper-Nickel-Chrome Plating on Plastics -- A Continuous Process and its Challenges, Jun - 2003, Joseph R. Arnold |
| Uses & Properties of Multilayer Nickel Systems & Alternative Finishes in the Aluminum Wheel Market, Jun - 2003, Michael Crary |
| Troubleshooting Plating Problems From a Laboratory Perspective, Jun - 2003, Anthony J. Varuolo |
| Mass Transfer Effect in Plating Reactors, Jun - 2003, G. Nelissen, B. Van Den Bossche, A. Van Theemsche, J. Deconinck |
| Gold Plating Technologies Using "Sulphite Systems", Jun - 2003, Steve Burling & Diane Markey, Giorgio Bolli & Hirohiko Shiokawa |
| Ultra-thin PdCo/Au Surface Finishes for Electronic Packaging, Jun - 2003, Chonglun Fan, Chen Xu and Joseph A. Abys |
| High-speed NiP Process for Connector Applications, Jun - 2003, Jochen Heber & Thomas Gaethke |
| A Low Cost Semiconductor Metallization/Planarization Process, Jun - 2003, H. Dyar, E.J. Taylor, J. Sun, Maria Inman |
| A New Copper Etching Process by Using Electrically Mediation For PWB Manufacturing Application, Jun - 2003, J.J. Sun, E.J. Taylor, L.E. Gebhart and Alan West |
| Waste & Sludge Minimization from Surface Treatments & Waste Recovery from Industrial Processes, Jun - 2003, Dr. Xavier Albert Ventura |
| Spill Response, Jun - 2003, Martha S. Martin, CEF-4 |
| Recycling Used Rinse Water Using Reverse Osmosis on Standard (Iron-phosphate) Washer, Jun - 2003, Thomas Borcherding |
| Continuous Electrodialysis Treatment of Electroless Nickel Field Results, Jun - 2003, David Crotty, PhD, Franck Robin, & Dan Bailey |
| Nanotechnology Opportunities For Electroplating Industries, Jun - 2003, G. Palumbo, F. Gonzalez, K. Tomantschger, U. Erb & K.T. Aust |
| Nanostructured Zn-Ni Alloys as a Replacement for Cadmium Coatings, Jun - 2003, Swaminatha P Kumaraguru, Basker Veeraraghavan, Bala S. Haran and Branko N. Popov |
| Nanostructured Titania Coatings on Electrolytic Plasma-Polished Titanium Alloys, Jun - 2003, A. Stanishevsky & A. Parshouto & A. Mahiout |
| Development of Nanostructured Ni-Zn-P Alloys by Electroless Deposition for Replacement of Cadmium Coatings, Jun - 2003, Basker Veeraraghavan, Swaminatha Prabu Kumaraguru, Bala Haran and Branko Popov |
| Electrodeposition of Cobalt Platinum Alloys Micromagnets, Jun - 2003, S. Franz, P.L. Cavallotti, M. Bestetti, V. Sirtori and L. Lombardi |
| What is the Alternative to the Salt Spray Test, Jun - 2003, W. Paatsch |
| Microindentation and XPS Characterization of ACD Ni-P, Jun - 2003, L. Magagnin, M. Ghilardi, F. Pagano, L. Lombardi, V. Sirtori and P.L. Cavallotti |
| Electrodeposition and Properties of Silver-Antimony Alloy Multilayers, Jun - 2003, Andreas Zielonka & Ivan Krastev |
| A New Zinc Chloride Electroplating Bath, Jun - 2003, Richard Painter |
| Effect of Metallic Bath Contaminants On Zn-Ni Electroplated Alloy Properties, Jun - 2003, Eric Vignola, Richard Menini, George Petrescu & Lucian Gurban |
| Regeneration of Chromate-free Zinc Passivating Solutions, Jun - 2003, Dr. Sergey S. Kruglikov, Dmitri Yu. Turaev and Dr. Elena S. Kruglikova |
| Evaluation of Alloy Coatings Being Developed As Alternatives to Cadmium Coatings, Jun - 2003, Captain Gary C. Wright, Eric W. Brooman, Milissa A. Pavlik and Susan B. Van Scoyoc |
| Corrosion Characteristics of Alloy Films Produced By HSSL Process, Jun - 2003, Hideyuki Kanematsu, Tatsumasa Kobayashi, Noriyuki Wada, Takeo Oki |
| Nano-particle Composite Plating as an Alternative to Hard Chromium and Nickel Coatings, Jun - 2003, M.L. Klingenberg, E.W. Brooman and T. A. Naguy |
| Wear Properties of Nanocrystalline Electrodeposits, Jun - 2003, D.H. Jeong, U. Erb, J. McCrea and G. Palumbo |
| Electrocodeposition of Nanocomposite Films, Jun - 2003, Jan B. Talbot |
| The Corrosion Behaviour of Nanocrystalline Electrodeposits, Jun - 2003, S.H. Kim, U. Erb, F. Gonzalez & G. Palumbo |
| Structural Repair of Degraded Process Piping By In-Situ Deposition of Nanostructured Materials, Jun - 2003, I. Brooks, G. Palumbo, F. Gonzalez, A. Robertson, K. Tomantschger & K. Panagiotopoulos |
| Modern Applications for Electropolishing, Jun - 2003, Edwin P. Bayha |
| Electro Chemical Machining (ECM) What is It?, Jun - 2003, Terry Lievestro |
| Electrolytic Machining, Deburring & Polishing, Jun - 2003, Donald G. Risko |
| Electrically Mediated Edge and Surface Finishing: Application to Industrial Parts, Jun - 2003, A. Bonifas, Dr. E.J. Taylor, Dr. M. Inman, J. Sun, J. Wallace, T. Lievestro |
| Practical Applications & Considerations of Electro-Chemical Deburring, Jun - 2003, Rich Taufer |
| Shop Talk--Some Production Plating Problems & How They Were Solved—Part 2, Sep - 2003, Dr. Samuel Heiman, Updated by Dr. James H. Lindsay |
| Advice & Counsel--RCRA Recriminations, Sep - 2003, Frank Altmayer |
| Fact or Fiction?--Regulatory Alchemy, Sep - 2003, Jack W. Dini |
| Rectifier Clinic--Rectifier Bussing, Sep - 2003, Craig Henry |
| Finishing Facts, Sep - 2003, |
| Lead-free Coatings in High Speed Electronic Connectors, Sep - 2003, Sudarshan Lal, James A. Kopec and Stephen R. Angeli |
| Printed Circuit Board Wastewater Recovery: Overview & Case Study, Sep - 2003, Philip M. Kemp, and Alan Karg |
| Effect of Post-detachment Cleaning on the Hydrophilic Nature of Nickel Thin Film Nozzle Plates for Piezo Ink-jet Printer Heads, Sep - 2003, Sungkyu Lee, Jaekyu Lee, Jong-Hee Kim and Hyungsik Chung |
| Non-Chromated Technology Works on Aircraft, Oct - 2003, Laura Roberts & Anthony Laura Roberts & Anthony Galanis |
| Shop Talk--Some Production Plating Problems & How They Were Solved—Part 3, Oct - 2003, Dr. Samuel Heiman, Updated by Dr. James H. Lindsay |
| Rectifier Clinic--Firing Boards, Oct - 2003, Craig Henry |
| Finisher's Think Tank ‐ Chromium Plating ‐ Additional Tips for Good Service Performance, Oct - 2003, Stephen F. Rudy |
| Advice & Counsel--Adhesion to Plastic Substrates Depends on Type of Plastic, Oct - 2003, Frank Altmayer |
| Fact or Fiction?--Supreme Arrogance, Oct - 2003, Jack W. Dini |
| Propylene Glycol Ethers for Ultrasonic Cleaning, Oct - 2003, Prof. Bogdan Niemczewski |
| Formation of an Fe-Sn Intermetallic Layer During the Refl ow Process After Tin Plating, Oct - 2003, Marcelo J. L. Gines, Gonzalo J. Benítez, Walter Egli, J. L. Zubimendi and Teresa Pérez |
| Metrology Errors in the Use of Insulating Dots for Plated Thickness Measurements, Oct - 2003, Dr. Thomas E. Dinan |
| Finishing Facts, Oct - 2003, |
| Shop Talk--Some Production Plating Problems & How They Were Solved—Part 5, Dec - 2003, Dr. Samuel Heiman, Updated by Dr. James H. Lindsay |
| Advice & Counsel--Got Nickel? The Trend is to Restrict Its Use, Dec - 2003, Frank Altmayer |
| Fact or Fiction?--Twentieth Century Environmental History (Abridged), Dec - 2003, Jack W. Dini |
| Rectifier Clinic--Shunts & Amperage Monitoring, Dec - 2003, Craig Henry |
| Finisher's Think Tank--Is It Soup Yet? On the Track of Perfect Surface Finishing, Dec - 2003, Stephen F. Rudy |
| Finishing Facts, Dec - 2003, |
| The Corrosion Behavior of Cadmium, Zinc, Zinc-Nickel & Nickel-Phosphorus/Zinc Commercial Coatings in Chloride Solutions, Dec - 2003, L.A.S. Silva & L. Sathler |
| Applying Commonly Available Software For Quality Control & Troubleshooting, Dec - 2003, P.D. Stransky, CEF |
| Compound-Layer Blackening of Steel at Room Temperatures, Dec - 2003, Z. Zhongcheng |
| Pollution Prevention painting & Compliance Enhancement, - 2003, Iowa Waste Reduction Center |
| The Use of Wetting Agents/Fume Suppressants in Hard Chromium Electroplating Baths, - 2003, Kathleen Paulson |
| Test and Evaluation of a Pilot System for Ion Exchange Treatment of Cadmium Cyanide Wastes, - 2003, Bowen, Richard and O'Donnell, Joyce and Balasco, Armand |
| Removal, Separation, and Recovery of Heavy Metals from Industrial Wastestreams Using Molecular Recognition Technology (MRT), - 2003, Dr Katherine Ford |
| Removing Chromium (VI) from Wastewater by Anionic Liquid Ion Exchange (A-LIX), - 2003, Larry Cook |
| Materials and Fabrication Methods for High Temperature Micro-Magnetic Machines for Micro-Turbine Power Generation, - 2003, Arnold, David P. and Cros, Florent and Glover, Tiffany and Allen, Mark G. and Hillman, Keithan and Veazie, David |
| Energy Analysis Tools, - 2003, Fournier, Donald |
| EC and life vehicles directives and hexavalent chromium, - 2003, Patricia Preikschat |
| Impacts of Bulk Phosphorous Content of Electroless Nickel Layers to Solder Joint Integrity and their Use as Gold- and Aluminum-Wire Bond Surfaces, - 2003, Sven Lamprecht, Kuldip Johal, Hugh Roberts, Dr. Hans-Juergen Schreier |
| Investigation of the recommended immersion Tin thickness for lead free soldering, - 2003, Sven Lamprecht |
| Pollution Prevention Technology Profile Trivalent Chromium Replacements for Hexavalent Chromium Plating, - 2003, |
| Pulse Anodizing in an Existing Anodizing Line , - 2003, Anne Deacon Juhl |
| Energy Efficiency Improvement and Cost Saving Opportunities for the Vehicle Assembly Industry, - 2003, Christina Galitsky and Ernst Worrell |
| Trivalent Chromium Replacements for Hexavalent Chromium Plating, - 2003, Pollution Prevention Technology Profile |
| Beyond Awareness: Effective Outreach to the Metal Finishing Industry, Jan - 2002, Linda Darveau & Dr. Ihab Farag |
| Revised Method 306-A: A Simplified Way for Finishers to Do Certification Testing, Jan - 2002, Frank R. Clay |
| Designing Environmentally Safe Compounds for Mass Finishing, Jan - 2002, Andrew Kuuttila |
| The Road to a Cyanide Free Plating Shop, Jan - 2002, Glen H. Graham |
| A Study of Wear Resistance of a New Cr Replacement: An Electrodeposited Ni-Co-X Alloy, Jan - 2002, Wenhua Hui, Fanjuan Meng, Kaiyuan Ji, & Lei Li |
| Overview of U.S. HCAT Technology Insertion Program On Qualification of Thermal Spray Coatings As Replacement for Hard Chromium Plating on Aircraft Components, Jan - 2002, Bruce D. Sartwell |
| Improving Aluminum Ion Vapor Deposition, Jan - 2002, Lisa Cato & Melissa Klingenberg |
| Alternative Coatings for Wear and Corrosion: The Electrospark Deposition Process, Jan - 2002, Roger N. Johnson |
| How to read - and read into - a MSDS, Jan - 2002, Michael F. Burnson, CEF |
| Getting Health & Safety Right: Economics & Creativity, Jan - 2002, Philip A. Platcow, C.I.H. |
| PRE-OSHA INSPECTION PLANNING GUIDELINES, Jan - 2002, Robert F. Lee, CEF REA |
| NON-MAIN STREAM REGULATIONS, Jan - 2002, Robert F. Lee, CEF REA |
| Enhancement of the U.S. EPA's Metal Finishing Facility Risk Screening Tool (MFFRST), Jan - 2002, William M. Barrett Jr., Ph.D., P.E. & Paul Harten, Ph.D., Matt Lorber, Charles Peck & Steve Schwartz |
| Ion Beam and Plasma Based Alternatives to Chrome Plating of Gas Turbine Engine Parts, Jan - 2002, Lisa Cato & Melissa Klingenberg |
| Non-line-of-sight (NLOS) Hard Chromium Alternatives Status Report, Jan - 2002, T. Naguy, M. Klingenberg, M. Neidbalson, M. Pavlik & D. Schario |
| Environmentally Acceptable Technologies For the Replacement of Cadmium Coatings for Defense Applications, Jan - 2002, Dr. Michael Kane |
| Trivalent Chromium Pretreatments for Defense Applications, Jan - 2002, Craig Matsdorf |
| Optimizing Fume Scrubber Efficiency by the Application of Water Soluble Dispersants, Jan - 2002, Mark E. Andrus |
| Utilization of Polymerized Aluminum Coagulant Technology to Reduce Toxicity of the Wastewater from an Integrated Metal Drawing, Tempering & Electroplating Facility, Jan - 2002, Frederick M. Lehmann and Mark E. Andrus |
| A Non-toxic Alternative to Metal Precipitation, Jan - 2002, Roy Norcross & Ruediger Peldszus |
| Managing Cyanide Effluents: Field Evaluation of Reverse Osmosis For Recycling Copper Cyanide Rinses, Jan - 2002, N. Rajagopalan, J.M. Pickowitz, C.J. Jahp, J.L Talbott & T. Chow |
| Treatment & Control of Nickel Electroplating Baths Using Catalyzed Hydrogen Peroxide, Jan - 2002, Peter Forth, Art Vibert, Madeline Busch and Sarah Stevenson |
| The Impact of Barrel Design on Drag-out Rates, Jan - 2002, Frank Altmayer, MSF, AESF Fellow, Jeff Zak, P.E., CEF, Kevin Wasag, CEF, Brian Cavanaugh |
| Environmentally Benign Manufacturing: Integrated-model-based Process Modification, Jan - 2002, H.H Lou & Y.L. Huang |
| Integrating Pollution Prevention, Pollution Control & Energy Efficiency In Surface Finishing through Process Modeling & Engineering Analysis, Jan - 2002, Kevin Klink, P.E., Peter Gallerani, CEF-2 & Eric Fountain, CEF |
| Performance Verification of an Industrial Wastewater Recycling System, Jan - 2002, Scott Maurer, Chris Start & Alva Daniels |
| Metals Removal to Low Levels Using Chemical Precipitants, Jan - 2002, Angela Kowalski |
| MP&M Compliance Using a Patented Vapor Compression Flash Evaporation System, Jan - 2002, Bob Torstrick |
| Electrodeposited Nanocrystalline Cobalt-Iron Alloys As an Environmentally Benign Replacement to Hard Chrome Plating, Jan - 2002, J.L. McCrea, G. Palumbo, M. Marcoccia & U. Erb |
| Waterborne Dip Coating, Jan - 2002, Steven R. Kline, Jr. |
| Aqueous Cleaning Basics, Jan - 2002, Vince Pavone |
| Catalytic Oxidizers: What You Should Know, Jan - 2002, Charles Martinson |
| Racking Parts More Efficiently, Jan - 2002, Richard Dooley |
| UV Powder on MDF, Feb - 2002, Steven R. Kline, Jr. |
| Dry Deburring Improves Production, Feb - 2002, Beverly A. Graves |
| Zinc Plating Using Split Rail Technology, Feb - 2002, Beverly A. Graves |
| Waiting for OSHA's APFs, Feb - 2002, Roger Brooks |
| Electropolishing as a Pretreatment for Anodizing, Mar - 2002, Beverly A. Graves |
| A Homegrown Painting System, Mar - 2002, Steven R. Kline, Jr. |
| Increase Parts Washing Capacity, Mar - 2002, Beverly A. Graves |
| Industrial Assessments for Pollution Prevention and Energy Efficiency, Mar - 2002, U.S. EPA, Office of Research and Development |
| The EN Plating Edge, Apr - 2002, Beverly A. Graves |
| Powder Coating Replaces Anodizing, Apr - 2002, Steven R. Kline, Jr. |
| New Dip/Spin Facility Improves Efficiency, Apr - 2002, Steven R. Kline, Jr. |
| Signing On a New Finish, Apr - 2002, Beverly A. Graves |
| Easy Waste Treatment for Spent EN Baths, Apr - 2002, Lloyd Ploof |
| Approaching Zero Discharge in Surface Finishing, Apr - 2002, U.S. EPA, Office of Research and Development |
| Bolting Together a Good Cleaning System, May - 2002, Beverly A. Graves |
| Saving Water, Saving Chemicals, Saving Money, May - 2002, Beverly A. Graves |
| Environmentally Friendly Fastener Finishes, May - 2002, Andrew R. Pfeifer and George Shaw |
| Advancements in Automated Polishing, Buffing and Deburring, May - 2002, Glen Carlson |
| Finishing First in Quality, Jun - 2002, Beverly A. Graves |
| Herman Miller Adds Powder Coating, Jun - 2002, Steven R. Kline, Jr. |
| Software Improves Production Quality, Jun - 2002, Kevin Roach |
| Preventing Cross Contamination, Jun - 2002, |
| Improving Painting Efficiency and Quality , Jul - 2002, Kevin Jagielski |
| The Technology of Tiny Parts, Jul - 2002, Beverly A. Graves |
| Finishing Solutions Beyond the Surface, Jul - 2002, Beverly A. Graves |
| Selecting SCR Power Controllers, Jul - 2002, Michael Hardy |
| pH, Hydrogen Evolution
& Their Significance
In Electroplating Operations, Jan - 2002, N. V. Mandich |
| The Effect of Conductivity
On Current Distribution in the Hull Cell, Jan - 2002, M. Ghorbani, Sh.A. Sharifabadi & M.N. Zahed |
| Think Tank: Mechanical Processing—
An Alternative
To Traditional Plating, Jan - 2002, Stephen F. Rudy |
| SVC Topics: Applications
Of Vacuum Coatings, Jan - 2002, Donald M. Mattox |
| How Did
MP&M Come About?, Jan - 2002, George Cushnie, Paul Chalmer |
| Pulse Anodizing of Aluminum:
The Recovery Effect, Jan - 2002, Dr. Jean Rasmussen |
| Fact or Fiction: Chocolate—
LOTS of Chemicals, Jan - 2002, Jack W. Dini |
| Chat Room: How Many Are Online?, Jan - 2002, Travis Stirewalt |
| Advice and Council: Lead &TRI Reporting, Jan - 2002, Frank Altmayer |
| Lead-free Component Finishes –
A Market & Technical Analysis, Jan - 2002, John Swanson & Yun Zhang |
| Autocatalytic (Electroless) Nickel Systems, Feb - 2002, By Donald W. Baudrand, CEF |
| Finishing Cycles & Types of Parts Plated*, Feb - 2002, |
| Electroplating Processes*, Feb - 2002, |
| Fact or Fiction: Iron, Feb - 2002, Jack W. Dini |
| Advice & Counsel: More on Lead &TRI Reporting, Feb - 2002, Frank Altmayer, MSF, AESF Fellow |
| Chat Room: Online Purchasing Methods, Feb - 2002, Travis Stirewalt |
| Think Tank: Cool It ... Chill Out, Feb - 2002, Stephen F. Rudy, CEF |
| NMFRC News: Who's Meeting The MP&M Limits?, Feb - 2002, George Cushnie & Dr. Paul Chalmer |
| The Effect of Barrel Design on Drag-out, Feb - 2002, Frank Altmayer, MSF; Jeff Zak, P.E.; Kevin Wasag, CEF & Brian Cavanaugh, CEF |
| Practical Effects of Unclogging Pores With AC Power During Aluminum Anodizing in Sulfuric Acid Electrolytes, Feb - 2002, M. Lerner |
| Copper Metallization on Photosensitive-Crystallizable Glass Surfaces, Feb - 2002, By T. Nishiwaki & H. Honma |
| Effect of Buffer On Electroless Copper Deposition, Feb - 2002, S.-C. Kou & A. Hung |
| Finishing Facts, Feb - 2002, |
| Autocatalytic (Electroless) Plating on Aluminum, Mar - 2002, Donald W. Baudrand, CEF & updated by James H. Lindsay, AESF Fellow |
| Selecting an Aqueous Cleaning System, Mar - 2002, Edward H. Tulinski |
| Averting a Hydrogen Embrittlement Crisis, Mar - 2002, By Megan Pellenz, CEF & Milt Stevenson, Jr., CEF |
| Advice & Counsel: Welding & Lead Emissions, Mar - 2002, Frank Altmayer |
| Think Tank: Beating Those Rusty Blues: Effective Rust Prevention, Mar - 2002, Stephen F. Rudy, CEF |
| Fact or Fiction: Toxic Humans, Mar - 2002, Jack W. Dini |
| Understanding & Troubleshooting Electroplating Installations: Stray Currents & Bipolar Effects, Mar - 2002, N.V. Mandich |
| Use of Pulse- & Constant-current Plating for the Creation of Desirable Surface Microgeometry*, Mar - 2002, S.S. Kruglikov, P. Becker & O. Jankowski |
| Analysis of Electroless Nickel Solutions By Anion Chromatography, Mar - 2002, P.T. Bolger & D.C. Szlag |
| Finishing Facts, Mar - 2002, |
| Important Considerations In Hard Chromium Plating, Apr - 2002, Written by Myron E. Browning, CEF Updated by Dr. James H. Lindsay, AESF Fellow |
| The Use of "Fuzzy Logic" for Identifying Significant Environmental Aspects, Apr - 2002, Dr. Wayne E. Bates, P.E. |
| Chat Room: High-speed Internet Access Use is Growing, Apr - 2002, Travis Stirewalt |
| Fact or Fiction: NO-From Pollutant To Molecule of the Year, Apr - 2002, Jack W. Dini |
| Advice & Counsel: Magnesium, Apr - 2002, Frank Altmayer |
| Finisher Think Tank: Taking Control: Do It Right ... Do It Once, Apr - 2002, Stephen F. Rudy, CEF |
| An Electrodeposited Copper Zeolite Catalyst for the Removal of the Pollutant, Nitric Oxide, from Combustion Gases, Apr - 2002, F. Uddin-Chishti, J. Orrin & A.F. Averill |
| Purification of Hard Chromium Plating Baths-Options & Challenges, Apr - 2002, V.S. Donepudi, N.R. Khalili, R. Kizilel & J.R. Selman |
| Hierarchical Optimization of Cleaning & Rinsing Operations in Barrel Plating, Apr - 2002, Q. Zhou & Y.L. Huang |
| Basic Chemistry for Electroplaters, May - 2002, Fred Pearlstein, CEF |
| Finishing Facts, May - 2002, |
| Pulse Plating: Pulsed Power Technology: Wave Sequencing, May - 2002, Enrique Gutiérrez, Jr. |
| Advice & Counsel: Making a Company Resistant to Terrorism, May - 2002, Frank Altmayer |
| Fact or Fiction: What If Noah Had to Build the Ark Today?, May - 2002, Jack W. Dini |
| Finishers Think Tank: Spring Training-It Never Ends, May - 2002, Stephen F. Rudy, CEF |
| The Baghdad Battery-Myth or Reality?, May - 2002, Dr. D.E. Von Handorf |
| Electrically Mediated Plating of Semiconductor Substrates, Chip Scale Packages & High-density Interconnect PWBs, May - 2002, E.J. Taylor, J.J. Sun, B. Hammack, C. Davidson & M.E. Inman |
| Electrically Mediated Edge & Surface Finishing for Automotive, Aerospace & Medical Applications, May - 2002, J.J. Sun, L.E. Gebhart, M. Inman & E.J. Taylor |
| Commitment Keeps Pennsylvania Plater Adapting to Better Serve Customers
, Jul - 2002, |
| Air Agitation Systems, Jul - 2002, Louis Gianelos
Updated by Dr. James H. Lindsay
|
| Design Freedom Leads Furniture Manufacturer to Switch to Powder, Jul - 2002, Greg Bocchi |
| Advice & Counsel--MP&M Plus NODA = ???
, Jul - 2002, Frank Altmayer, MSF |
| Fact or Fiction? The Precautionary Principle, Jul - 2002, Jack Dini |
| Finishers' Think Tank ‐ Spray Cleaning ‐ Doing it the Right Way, Jul - 2002, Stephen Rudy |
| Electroless Nickel Plating from a Methanesulfonate Solution
, Jul - 2002, N.M. Martyak |
| Pulse Periodic Reverse Plating—New Possibilities for Electrodeposition of Metal Coatings with Improved Properties: Part 1, Jul - 2002, M. Aroyo & N. Tzonev |
| Studies on Formaldehyde-free Electroless Copper Deposition, Jul - 2002, S. Karthikeyan, T. Vasudevan, K.N. Srinivasan & S. John |
| Finishing Facts, Jul - 2002, |
| European End-of-Life Vehicles Directive Prompts Automakers to Recycle, Sep - 2002, |
| Eliminating Problems In Cyanide Copper Plating
, Sep - 2002, |
| Advice & Counsel--Comments on MP&M Plus NODA, Sep - 2002, Frank Altmayer |
| Fact or Fiction? ‐ Food-borne Illness ‐ It's Caused by Bacteria, Not Chemicals, Sep - 2002, Jack Dini |
| Finishers' Think Tank ‐ Back to School ‐ Great Benefits for Finishers
, Sep - 2002, Stephen Rudy |
| Finishing Facts, Sep - 2002, |
| Effect of Ceramic Particle Pretreatment and Surface Chemistry on Electrocomposite Coatings, Sep - 2002, Y. M. Henuset & R. Menini |
| Troubleshooting Electroplating Installations:
Nickel Sulfamate Plating Systems, Sep - 2002, N.V. Mandich & D. W. Baudrand |
| Development of the Metal Finishing Facility Risk Screening Tool (MFFRST), Oct - 2002, |
| When it Comes to Electropolishing, This Baltimore Jobshop Has it All Together, Oct - 2002, |
| What is Under the Plate?, Oct - 2002, George B. Hogaboom, Updated by Dr. James H. Lindsay, AESF Fellow |
| Advice & Counsel-‐ Switching From 40CFR Part 413 To 40CFR Part 433, Oct - 2002, Frank Altmayer, MSF, AESF Fellow |
| Fact or Fiction? Expensive Animals, Oct - 2002, Jack W. Dini |
| Finisher's Think Tank ‐ Functional Plating ‐ Applications for 16 Deposits, Oct - 2002, Stephen F. Rudy, CEF |
| Rectifier Clinic--Replacing Thyristors, Oct - 2002, Craig Henry |
| Finishing Facts, Oct - 2002, |
| Influence of 1,3,6 Naphthalene Trisulfonic Acid on Microstructure & Hardness in Electrodeposited Ni-layers, Oct - 2002, A.A. Rasmussen, * P. Møller & M.A.J. Somers |
| A Summary of the EPA Capsule Report On Nickel Plating Emission Issues, Control Technologies, & Management Practices, Oct - 2002, T. David Ferguson, CEF* & Frank Altmayer, MSF |
| Hydrogen Embrittlement in Coating Technology ‐ Measurement & Testing, Oct - 2002, Dr. W. Paatsch * & V.-D. Hodoroaba |
| Ideal Layout for a Hard Chromium Plating Shop, Jun - 2002, By Arthur W. Logozzo, Updated by Dr. James H. Lindsay |
| Minnesota Finisher Offers High-Purity Aluminum As an Environmentally Friendly Coating, Jun - 2002, |
| European Union ELV Directive: How will It Impact the Automotive & Metal Finishing Industries?, Jun - 2002, Dr. James H. Lindsay |
| Printed Circuit Plating Technology Update From the IPC Printed Circuits Expo, Jun - 2002, Dr. James H. Lindsay |
| A New 3D Electroplating Simulation & Design Tool, Jun - 2002, F. Druesne, M. Afzali & R. Mouton |
| Advice & Counsel: Surface Tension & The Chromium MACT, Jun - 2002, Frank Altmayer |
| Fact or Fiction: Nuclear Power ... Stay Tuned, Jun - 2002, Jack W. Dini |
| Finishers Think Tank: Time Check for Finishing, Jun - 2002, Stephen F. Rudy, CEF |
| Finishing Facts, Jun - 2002, |
| Corrosion Resistance of Electroplated Sn-Zn Alloy & Its Improvement, Jun - 2002, K. Wang, H.W. Pickering & K.G. Weil |
| The Effect of Polyethylene Glycol 8000 Additive on the Deposition Mechanism & Morphology of Zinc Deposits, Jun - 2002, G. Trejo, R. Ortega & Y. Meas |
| The Environmental Benefits of Composite Electroless Nickel Coatings, Aug - 2002, Michael D. Feldstein |
| Powder Coating Filter Saves Time & Money, Aug - 2002, John Walz |
| Wastewater Treatment Made Simple, Aug - 2002, Ratana Kanluen and Sultan I. Amer |
| Anodizing Comes in Out of the Cold, Sep - 2002, Beverly A. Graves |
| Tooling Up a Tough Thin Film, Sep - 2002, Beverly A. Graves |
| Non-Electrolytic Aluminum Oxide Conversion Coating, Sep - 2002, John W. Wibber, Ph.D. |
| Connecting with the Right Finish, Oct - 2002, Beverly A. Graves |
| On My Mind: Disaster Recovery, Oct - 2002, Steven R. Kline Jr. |
| Steel Media Shines, Oct - 2002, Kelly Parent |
| Long Live Acid Baths!, Nov - 2002, Beverly A. Graves |
| Permit-Free Chromium Plating, Nov - 2002, Beverly A. Graves |
| E-Coated for Life, Nov - 2002, Cindy Oravitz |
| Film Shrinkage as a Part of Coating Costs, Nov - 2002, Joseph J. Subda |
| The Evolution of FrameCoat™ Electrocoat, Nov - 2002, Robert Woodall |
| One Company, Two Different E-Coat Systems, Nov - 2002, Barnie Haen |
| Bulk Application of Electrocoat: The Application of the Future, Nov - 2002, John L. Zbiegien |
| Added Efficiency And Cost Savings Through Anode Switching, Nov - 2002, Craig A. Henry |
| Weight Loss vs. Coating Density as a Measure of Applied Coating Cost, Nov - 2002, Daniel M. Ruble |
| Testing For Electrocoat Paint Baths To Optimize Cost Savings, Nov - 2002, William C. Lemons |
| Understanding Your Total Costs For Electrocoating, Nov - 2002, Michael A. Contos |
| Shining Up Bright Nickel Plating Baths, Dec - 2002, Beverly A. Graves |
| Powder Brings Out Maysteel's True Colors, Dec - 2002, Matthew J. Little |
| Complex Parts, Innovative Solutions, Dec - 2002, Matthew J. Little |
| Customizing Surface Abrading for a Perfect Finish, Dec - 2002, Terry Nuttall |
| Perspectives: Automotive Update, Dec - 2002, Beverly A. Graves |
| Saving Valuable Bath Chemicals, Dec - 2002, Beverly A. Graves |
| Alkaline Etching of Aluminum & Its Alloys ‐ A New Caustic Soda Recovery System, Jun - 2002, Dr. Enzo Strazzi, Silvia Bellei, & Dennis Duncan |
| Is There Any Similarity between Pulse Plating and Aluminum Pulse Anodizing?, Jun - 2002, Moisey Lerner |
| Effect of Additives on Faraday Power Reduction in Sulfuric Acid Anodizing of Al, Jun - 2002, Moisey Lerner |
| Comparing Different Pulse Anodizing Processes on Aluminium and its Alloys, Jun - 2002, Maksim Kireitseu, M. Istomin, Sergey Yerakhavets, V. Basenuk |
| Mass transfer effects in plating reactors, Jun - 2002, G. Nelissen, B. Van Den Bossche, A. Van Theemsche, J. Deconinck |
| Considerations for Copper Deposition for ULSI Interconnects, Jun - 2002, Alan C. West |
| Improvement of Mechanical Fatigue Life of Tool Steel with Electrochemical Finishing, Jun - 2002, B. W. Lilly, J. R. Brevick, A. Bonifas, M. Inman, J. Sun, E.J. Taylor |
| Study of the Corrosion Inhibition of Zinc by Benzotriazole with an Electrochemical Quartz Crystal Microbalance, Jun - 2002, K. Wang, H. W. Pickering and K. G. Weil |
| A Computer in a Finishing Shop? -What a Novel Idea!, Jun - 2002, Ira S. Handelsman |
| Technical Information and Calculation by Access to the Internet with Mobile Telephones, Jun - 2002, Dr. Ryushin OMASA, Shunsuke KAWAUCHI and Toshihiko SATO |
| Using e-Commerce to Increase Revenues & Profits in Your Plating Shop, Jun - 2002, Joseph L. Hellmers |
| Tin Whisker Studies—Experimentation & Mechanistic Understanding, Jun - 2002, Rob Schetty |
| An Empirical Study into Whisker-Growth of Tin & Tin Alloy Electrodeposits, Jun - 2002, Keith Whitlaw & Jeff Crosby |
| Whisker Formation on Electroplated Sn-Cu, Jun - 2002, M. E. Williams, C. E. Johnson, K.-W. Moon, G. R. Stafford, C. A. Handwerker, and W. J. Boettinger |
| Issues Affecting Small Chrome Plating Facilities, Jun - 2002, Julie C. Rogers |
| Energy Conservation in Hard Chromium Plating, Jun - 2002, Frank Altmayer |
| Analytical Methods: Hexavalent Chromium Plating Solutions, Jun - 2002, Mary C. Traficante |
| Temperature of Aluminum Being Anodized, Jun - 2002, Takafumi Mita & Tomohiro Kaneko AKAO, Dr. Ryushin OMASA & Professor Dr. Toshihiko SATO |
| The Future of Aluminum Anodizing in Sulfuric Acid Electrolytes, Jun - 2002, Moisey Lerner |
| Anodic Oxide Finishes: Relating Engineering Performance to Microstructure and Hardness, Jun - 2002, Jude M. Runge |
| Frictional Vibration of Anodic Alumina-based Ceramic Friction Pairs and Brake Pads (Effects of hardness, deformation and poro, Jun - 2002, Maksim Kireitseu, Sergey Yerakhavets, M. Istomin |
| Fracture of hard alumina-based ceramic composite coatings on a metal substrate, Jun - 2002, Maksim Kireitseu, M. Istomin, Sergey Yerakhavets |
| Recycling of Process Water & Energy Saving in Surface Treatment Processes to Prevent Environmental Impact in The Twenty-First, Jun - 2002, Prof. Xavier Albert Ventura |
| Printed Circuit Board Wastewater Recovery – Overview & Case Study, Jun - 2002, Philip M. Kemp, & Richard B. Wood |
| Integration of Ceramic Micro Filtration & Reverse Osmosis for Recycle of Metal Finishing Wastewater, Jun - 2002, Gary Carlson |
| Tin Whisker Observations on Pure Tin-Plated Ceramic Chip Capacitors, Jun - 2002, Gary Carlson |
| Effect of PWB Plating on the Microstructure and Reliability of SnAgCu Solder Joints, Jun - 2002, Y. Zheng, C. Hillman, P. McCluskey |
| Belt & Re-work Strippers for Lead-free Solders, Jun - 2002, A. Chirafisi, I. Boguslavsky, M. Toben, M. Leung, C. Wong |
| Lead-free Coatings in High Speed Electronic Connectors, Jun - 2002, Dr. Sudarshan Lal |
| Analysis of Functional Chromium Electrodeposits, Jun - 2002, Dr. Allen R. Jones and Chris Ringholz |
| Troubleshooting Decorative Chromium Baths, Jun - 2002, Jeff Guernsey |
| The Decorative Colors of Trivalent Chromium Deposits, Jun - 2002, Dr. Donald L. Snyder |
| Some Aspects of Recent Development on Functional Trivalent Chromium Plating, Jun - 2002, Patrick Benaben |
| Electrically Mediated Process for Functional Trivalent Chromium to Replace Hexavalent Chromium: Scale-up for Manufacturing Insertion, Jun - 2002, R.P. Renz, J.J. Fortman, E.J. Taylor, & M.E. Inman |
| General Considerations for Construction and/or Renovation of Anodizing Facilities, Jun - 2002, Angela M. Vawter |
| Surface Engineering & Process Feasibility Study of Anodically Treated Aluminum vs. Aluminum Applied with an Electroless Nickel Coating, Jun - 2002, Ira J. Donovan |
| Chromate - Free Conversion Coatings For Aluminum, Jun - 2002, John W. Bibber |
| Different Sealing Methods For Anodized Aluminium & New Sealing Techniques & Fluorpolymers Sealing; Environmental Impact Recapitulation & Parameters Optimization--Part III, Jun - 2002, Prof. Xavier Albert Ventura |
| Micro-Macro Behavior Near the Crack Tip in a Composite Materials Based on Anodic Hard Ceramics, Jun - 2002, Maksim Kireitseu |
| Chemistry: The Core of Cleaning, Jun - 2002, Eric M. Dill |
| Designing the Proper Cleaning System for the Substrate, Jun - 2002, Richard W. Mahn |
| New Cleaning Technology ‐ Low pH, Recyclable, Heavy-duty Aqueous Cleaners, Jun - 2002, Michael Endres & Mark Ventura |
| Reel-to-Reel Selective Plating Processes, Jun - 2002, Dr. Kan-Lin Hsueh & Dr. I-Yuan Wei |
| Reductions in the Thickness of Gold Layers For Connector Applications by Utilizing Undercoats of Electrolytic Nickel Phosphorous Alloys, Jun - 2002, Steve Burling, Mike Wild & Sandra Teague & Christian Leclere |
| A New High Speed Acid Gold Process, Developed & Characterised for Connector Market, Jun - 2002, Lionel Chalumeau, José Gonzalez, Christian Leclere, Michel Limayrac, Martine Wery, Jacques Pagetti |
| Effects of Molecular Weight of Organic Additives on the Mechanical Properties of Acid Copper Deposits, Jun - 2002, C.H. Huang, C.H. Lee, W.Y. Shu and H.M. Wu |
| Electrically Mediated Metallization of Printed Wiring Board and VLSI Features, Jun - 2002, E. J. Taylor, J.J. Sun, B. Hammack, C. Davidson, M. Inman |
| Alloying Behavior of Tin-Zinc from Stacked Single Layers, Jun - 2002, Hideyuki Kanematsu, Tatsumasa Kobayashi, Takeo Oki |
| High Nickel Alloy & Tin-Silver Alloys, Jun - 2002, Toshiaki Murai |
| Zinc-Nickel Alloy Plating Utilizing Boxed Anode Technology, Jun - 2002, Rob Frischauf |
| Enhancement of Co-W Electrodeposits on Cast Iron & Steel Substrates by use of a Cobalt Strike, Jun - 2002, H.Capel, P.H. Shipway, S.J. Harris |
| Recent Developments in Trivalent Chromium Plating Process, Jun - 2002, Dr. Sergei S. Kruglikov, Dr. Vladimir N. Kudryavtsev, Dmitri Yu. Turaev, Vitali V. Kuznetsov |
| Decorative applications for alloy plating, Jun - 2002, Michael Wyrostek |
| New Pretreatment in Plating Lines, Jun - 2002, Dr. Karl Brunn |
| Advances in Biological Cleaning, Jun - 2002, Juan Hajdu |
| Extending Cleaner Life Through Particulate & Oil Removal by Filtration & Coalescing, Jun - 2002, Richard Crain, Charles Schultz & Jack H. Berg |
| EPA Environmental Technology Verification Experience, Jun - 2002, James Totter & George Moore |
| Tin-Nickel Alloy Films Produced from Stacked Single Layers by Heating & Their Characteristics, Jun - 2002, Hideyuki Kanematsu, Tatsumasa Kobayashi & Noriyuki Wada, Takeo Oki |
| High Performance Alkaline Cyanide-free Zinc Plating Carbon-rich Deposit, Jun - 2002, Nabil Zaki & Ray Lindemann |
| The Role of Mass Transport Phenomena in the Microdistribution of Electrodeposited Alloys, Jun - 2002, S.S. Kruglikov, V.I. Kharlamov, T.A. Vagramyan |
| Closing the Loop on Bright Nickel Electroplating; 2nd-Year U.S. Status, Jun - 2002, Howard M. Smith & Dr. Donald Snyder |
| Chloride-Based & Chloride-Free Products For the Rotogravure Industry, Jun - 2002, Grant Keers |
| Nickel Defense Strategy, Jun - 2002, William J. Saas |
| Electrodeposited Nanocrystalline Coatings for Hard-Facing Application, Jun - 2002, G. Palumbo, U. Erb, J.L. McCrea, G.D. Hibbard, I. Brooks, F. Gonzalez and K. Panagiotopoulos |
| Air Force Hard Chromium Coatings Replacement Efforts, Jun - 2002, E. Brooman, J. Kolek, T. Naguy, and M. Klingenberg, M. Pavlik and D. Schario |
| Electrodeposition of Nickel, Nickel -Boron Alloy and Nickel -Composite Coatings from Ammonia-Citrate Bath, Jun - 2002, Kudryavtsev V.N., Makkaveyeva S., Pilipenko D.G., Yarlykov M.M., Anufriev N.G., Fedoseev |
| Comparison of Reciprocating Wear Behavior of Electrolytic Hard Chrome And Arc-PVD CrN Coatings, Jun - 2002, Ebru Bozyazi, Mustafa Ürgen, Ali Fuat Çakir |
| Alternatives to coatings from Chromium VI baths, Jun - 2002, M. Bestetti, N. Lecis, L. Magagnin, R. Pirovano and P.L. Cavallotti |
| Composition and Morphology Changes and their Influence on Hydrogen Evolution on Ni-Mo and Fe-Mo Alloys Electrodeposited by DC and Pulsed Current, Jun - 2002, V. D. Jovic, B. M. Jovic, G. R. Stafford |
| Investigation of Zn Corrosion in Chromium (VI) - SO 2, Jun - 2002, R.Sarmaitis, V.Dikinis, R.Rezaite, I.Demcenko |
| Electrodeposition of Cu-Sn and Ag-Sn alloys from thiourea containing electrolytes, Jun - 2002, M. Bestetti, A. Vicenzo and P.L. Cavallotti |
| Field Experiences with High Corrosion Resistance Trivalent Conversion Coatings, Jun - 2002, Richard Painter |
| Surface Preparation of Metals Prior to Plating, Jun - 2002, Dr-Ing. N. V. Mandich |
| Titanium Oxide Powder Coating for High Emissivity, Jun - 2002, Hideyuki Kanematsu, Naoki Takayama, Toyofumi Ogura, Takeo Oki |
| New Ultrasonic Technology ‐ Multi-Frequency Transducers, Precise Digital Waveform Control and Compact, High Efficiency Power Supplies., Jun - 2002, F. John Fuchs |
| A Low-cost Method for Polishing Aluminum Wheels for Chrome Plating, Jun - 2002, Pat Curran |
| Beyond Periodic Pulse Reverse, Jun - 2002, Enrique Gutierrez, Jr. |
| Pulse Effects at Anodes and Cathodes, Jun - 2002, Pat F. Mentone |
| Electrically Mediated Edge and Surface Finishing: Application to Industrial Parts and Effect on Mechanical Properties such as Fatigue Life, Jun - 2002, M. Inman, J. Sun, E.J. Taylor, B. Lilly, A. Bonifas, C. Lombard, Jr. |
| A-C modified Pulsed Pulse Reverse (PPR) Techniques - Effective Means for the Deposition of High-Quality Metal and Conversion Coatings, Jun - 2002, M. Aroyo, N. Tzonev |
| Microstructure & Other Properties of Pulse-Plated Copper for Electroforming Applications, Jun - 2002, P.T. Tang, J.D. Jensen, H.C. Dam & P. Møller |
| Pulse Deposition of Ternary Zn-Ni-X (X=Fe, SiO, Cd) from Sulfate Electrolytes, Jun - 2002, Swaminatha P. Kumaraguru, Kim Hansung & Branko N. Popov |
| Pulse-Plating of Gold-Copper-Cadmium Alloys, Jun - 2002, Ulrike Fastner, Selma Hansal CEF-3, Wolfgang E. G. Hansal CEF-3 |
| Pulse Plating of Gold-Tin Alloys for Microelectronic and Optoelectronic Applications, Jun - 2002, Anqiang He, Barbara Djurfors, Siamak Akhlaghi and Douglas G. Ivey |
| Pulse Plating of Binary Alloys Exhibiting Induced Codeposition, Jun - 2002, A. Marlot and D. Landolt |
| Effect of Sulfur on Corrosion Behavior of Pulse Plated Nanocrystalline Ni, Jun - 2002, S.H. Kim, K. T. Aust & U. Erb, & F. Gonzalez |
| The Effect of Phosphorus Content on the Structure and Wear Properties of Electrodeposited Nanocrystalline Ni-P Alloys, Jun - 2002, D.H. Jeong, U. Erb, K.T. Aust and G. Palumbo |
| Application of Pulse Plating and Pulse Reverse Plating techniques in Nickel electrodeposition ‐ a review, Jun - 2002, J.J.T.T. Vermeijlen |
| A One-of-a-kind Plating Shop That Specializes In Restoring All Kinds of Metal Antiques, Dec - 2002, |
| Selection & Applications of Inorganic Finishes: Chromate Coatings, Dec - 2002, Written by Fred Pearlstein, Updated by Dr. James H. Lindsay, AESF Fellow |
| Finishers Hear Good News, Talk to Officials About Environment and Trade Policy Issues, Dec - 2002, Christian Richter |
| Advice & Counsel: What Causes Macro-Cracks In Chromium Deposits?, Dec - 2002, Frank Altmayer |
| Rectifier Clinic: Effects of Heat & Humidity, Dec - 2002, Craig Henry |
| Finisher's Think Tank: End-of-year Note: Check Equipment & Processes, Dec - 2002, Stephen F. Rudy, CEF |
| Fact or Fiction? Indoors in the Good Old Days, Dec - 2002, Jack W. Dini |
| In situ Detection of Cracks During Electroplating Processes By Acoustic Emission, Dec - 2002, Tsutomu Morikawa* & Kanji Ono |
| Electrolytic Codeposition Of Diamond Particles With Nickel and Cobalt Metals, Dec - 2002, E.C. Lee & I.T. Moon |
| Finishing Facts, Dec - 2002, |
| Development of a Center for Advanced Mold/Mask Processes and Applications for the Miniaturization Technologies, - 2002, Varahramyan, Kody and Coane, Phillip and Hosseini, Mahmoud and Chen, Shin-Shiu |
| Replacement of Hexavalent Chrome Passivation on Galvanized Steel , - 2002, Peter Hülser |
| Processing of Plastics for Automotive Application, - 2002, |
| High Phosphorus ENIG - highest resistance against corrosive environment, - 2002, Sven Lamprecht, Petra Backus |
| Electroplating, Plating, Polishing, Anodizing and Coloring: 2002, - 2002, Juddy M. Dodds |
| The 43rd William Blum Lecture, Hydrogen Embrittlement of High Strength Steel: The Russian Approach, - 2002, Vladimir N. Kudryavtsev |
| How Long Should Cleaners & Acids Last?, Jan - 2001, By Dr. James H. Lindsay, Jr., AESF Fellow, Contributing Technical Editor |
| Guardian's New Paint Line Gets a Boost from Robotics, Jan - 2001, |
| A Metal Finisher's Evaluation of Commercially Available Lead-Free Solder Coatings, Jan - 2001, By M.J. Brouillard, CEF-SE & Dr. Raymond O. England, CEF |
| Jobshops Benefit From Strategic Goals Program, Jan - 2001, By Dr. James H. Lindsay, Jr., AESF Fellow, Contributing Technical Editor |
| Santa was "Naughty," Not Nice, Jan - 2001, Frank Altmayer, CEF |
| Multilayer Printed Circuit Board Analysis of Interlayer Adhesion Failure, Jan - 2001, Dr. Joseph A. Abys |
| 2001: A Plating & Surface Finishing Odyssey, Jan - 2001, Stephen F. Rudy, CEF |
| The Invention or Innovation Industry ... Autonomous & Connected, Jan - 2001, Dr. E. Jennings Taylor |
| To Fuse or Not Diffuse, Jan - 2001, Steve Koelzer |
| Reactive Sputter Deposition, Jan - 2001, Donald M. Mattox |
| Corrosion of Electrolytically Gilded Silver: A Case Study, Jan - 2001, E. Cano, J. Simancas & J.M. Bastidas |
| Effect of Agitation on Tin-Lead Alloy Deposition In a Methane Sulfonate System, Jan - 2001, C.S. Chen, C.C. Wan & Y.Y. Wang |
| Copper Corrosion Inhibition In Printed Circuit Board Production, Jan - 2001, E. Stupnisek-Lisac, M. Lisica and D. Reichenbach |
| Developments in Platinum Electroplating: P & Q Salt Solution Optimization, Jan - 2001, S.E. Hadian & D.R. Gabe |
| Cloaking the F-22, Feb - 2001, |
| Replacing Hexavalent Chromium, Feb - 2001, By Paul C. Wynn & Craig V. Bishop |
| So You Think You Have a Cleaning Problem?, Feb - 2001, By Dr. James H. Lindsay, Jr., AESF Fellow, Contributing Technical Editor |
| Tin/Zinc Alloy Plating, Feb - 2001, By Dr. Jean Rasmussen |
| MP&M Aftermath, Feb - 2001, Frank Altmayer, CEF |
| Plating Mysteries: Part 1, Feb - 2001, Jack W. Dini |
| 2001: A Plating & Surface Finishing Odyssey The Journey Continues ..., Feb - 2001, Stephen F. Rudy, CEF |
| Mid-frequency Magnetron Sputtering, Feb - 2001, Donald M. Mattox |
| Periodic Reverse Copper Electroforming from a Low Cu-content Acid Copper Sulfate Bath, Feb - 2001, K. Tajiri & T. Imamura |
| Study of Electroless Ni-P-Nanometer Diamond Composite Coatings, Feb - 2001, Yingwei Xiang, Jinyuan Zhang & Chenghai Jin |
| The Effect of Sealers on Increase Of Corrosion Resistance of Chromate-free Passivates on Zinc & Zinc Alloys, Feb - 2001, P. Upton |
| Framing Up a New Wastewater Treatment System, Jan - 2001, Beverly A. Graves |
| Keeping Pretreatment Simple , Jan - 2001, Beverly A. Graves |
| Painting More Efficiently, Jan - 2001, Steven R. Kline, Jr |
| Automatic Powder Coating ‐ Meeting Customers' Demands, Feb - 2001, Steven R. Kline, Jr |
| Replacing Hexavalent Chromium in Passivations on Zinc Plated Parts, Feb - 2001, Paul C. Wynn and Craig V. Bishop |
| How To Choose and Use Non-Woven Abrasives, Feb - 2001, David E. Simon |
| Anodized Bright; Anodized Tough, Mar - 2001, Beverly A. Graves |
| Treating Plating Wastewater, Mar - 2001, Ratana Kanluen and Sultan I. Amer, Ph.D. |
| New Electrocoating Equals Success, Mar - 2001, Steven R. Kline, Jr, |
| High-Precision Aqueous Cleaning, Mar - 2001, Shean R. Dalton |
| Opening the Gate to a Simpler Process, April - 2001, Steven R. Kline, Jr. |
| Nickel Plating Primer, April - 2001, Beverly A. Graves |
| Low-Cure High-Solids Coating, April - 2001, Jim Egizio |
| Growth and Diversification through Vertical Integration, April - 2001, Steven R. Kline, Jr. |
| Reducing the Red Tape Hassle, May - 2001, Steven R. Kline, Jr. |
| Pretreatment Makes Vending Machine One Tough Customer, May - 2001, Beverly A. Graves |
| New Plastics Plating Technology for 100-Year-Old Company, May - 2001, Beverly A. Graves |
| EMI Shielding with Turbine Power, June - 2001, Steven R. Kline, Jr. |
| Testing Report on Turbine-Powered Spray Guns, June - 2001, Steven R. Kline, Jr. |
| Quick, Effortless Color Changes, June - 2001, Steven R. Kline, Jr. |
| Production Application of Flat Solderable Tin Finishes: Some Practical Considerations, July - 2001, David H. Ormerod |
| Precision Coating for the Military, July - 2001, Martha McEachem |
| Ceramically Enhanced Ultrasonics, July - 2001, J. Michael Goodson |
| Considerations for Applying UV Coatings, July - 2001, John Owed |
| Spinning Away Waste, Aug - 2001, Sallie Guskey |
| Thermoplastic Powder for Outdoor Furniture, Aug - 2001, Steven R. Kline, Jr. |
| Optimizing Craftsmen's Polishing Skills, Aug - 2001, Mark Bergonzi |
| Protecting and Enhancing Decorative Plated Componentry at Keeler Brass, Aug - 2001, Beverly A. Graves |
| Profile of a Pretreatment System, Sept - 2001, Beverly A. Graves |
| Physical Vapor Deposition Processes, Sept - 2001, Donald M. Mattox |
| Reducing Compressed Air Costs, Sept - 2001, Wayne Perry |
| Delisting F006 Hazardous Waste: A learning experience, Jan - 2001, David R.Stewart,Ph.D.,PE,Tom Norman,PE,Robert Blinderman, Mr.John Babish,Mr.Jim Cahill,and Mr.Dan Cahill |
| Using the Internet to quickly, effectively, and inexpensively manage Environmental Health & Safety Issues, Jan - 2001, Amy L. Carlson and Richard Detrick |
| EPA's Metal Finishing Facility Risk Screening Tool (MFFRST) Status and Update, Jan - 2001, Matthew Lorber, Greg Schweer, Stephen Schwartz & Charles Peck, |
| A Validation of the Emissions Model from EPA's Metal Finishing Facility Risk Screening Tool--MFFRST, Jan - 2001, Stephen M. Schwartz & Matthew Lorber |
| The Use of "Fuzzy Logic" for the Identification of Significant Environmental Aspects, Jan - 2001, Wayne E. Bates |
| Tools for EPA's Performance Tracking Program: The New EPA/NSF Implementation Guide for Environmental Management Systems, Jan - 2001, S.P.Davis |
| Development of a New Chromium Coating Method to Eliminate Hexavalent Chromium, Jan - 2001, Mandar Sunthankar & Dan Storey |
| Non-Polluting Metal Surface Finishing Pretreatment and Pretreatment/Conversion Coating, Jan - 2001, MR. DAVID FERGUSON & DR. BRUCE MONZYK |
| Non-Line-of-Sight Hard Chromium Alternatives, Jan - 2001, T. Naguy, M. Klingenberg, M. Neidbalson, M. Pavlik, and D. Schario |
| The Study on Microstructure and Wear-resistance Mechanism of a Chromium Replacement Coating, Jan - 2001, Wenhua Hui and Phil Hanqiu Chen |
| Ion Beam and Plasma Based Alternatives to Chrome Plating of Gas Turbine Engine Parts, Jan - 2001, Lisa Cato & Melissa Klingenberg |
| A Thiosulfate-Sulfite Gold Electroplating Process for Monolithic Microwave Integrated Circuits (MMICs), Jan - 2001, L.G. Bhatgadde & S. Joseph |
| Efficient Wastewater Cleanup with Clay Based Flocculants, Jan - 2001, George Alther & Walter Ellis |
| Treatment of Metals Finishing Wastewaters from the Aerospace Industry, Jan - 2001, G.Dave Manku, P.Eng., Dr.Stephen R.Harper, P.E., & Randall C.Shaw |
| Developing and Implementing an Aggressive Water & Wastewater Strategy (W3SW) Plan at Raytheon Company in Tucson, Arizona, Jan - 2001, Paul W. Fecsik, CEF |
| The Effect of Cooling Water & Boiler Water Treatment Discharge Sources Upon Metal Finishing Wastewater Treatment Operations, Jan - 2001, Mark E.Andrus |
| Lead Removal by Ion Exchange, Jan - 2001, Peter Meyers |
| Case History: Optimization of a Wastewater Treatment Membrane System Designed for a Heat Treating & Metal Finishing Facility, Jan - 2001, Frederick Lehmann |
| In-Process Contaminant Removal from Hard Chromium Plating Baths Using a Fuel Cell Electrode Ion-Exchange Membrane Process (FC, Jan - 2001, M. I. Ahmed, N. R. Khalili, V. S. Donepudi, E. S. Smotkin, J. R. Selman and T.M. Holsen |
| Alkaline Cleaner Recycling Using Microbial Digestion An Environmental Technology Verification-Metal Finishing (ETV-MF) Pollut, Jan - 2001, James Totter, Gus Eskamani and Karrie Jethrow |
| Microfiltration for Cleaner Bath Life Extension An EPA Environmental Technology Verification of a Metal Finishing Pollution P, Jan - 2001, |
| Comprehensive Optimization of Cleaner Concentration Settings of Cleaning Operations in Electroplating Plants, Jan - 2001, H.H.Lou &Y.L.Huang |
| Field Experience with an Integrated Biological Degreasing System, Jan - 2001, Timothy P. Callahan, Mikael Norman and Juan Hajdu |
| Detailed investigation of the rejuvenation of a spent electroless nickel solution by electrodialysis with a view to optimizin, Jan - 2001, Paul Bolger, David Szlag, Albert Foster and Mike Goss |
| Closed-Loop Treatment of Electrolytic Nickel Rinse Water by Point-Of-Use Ion Exchange: A Case Study, Jan - 2001, Dave Szlag, Joe Leonhardt, Albert Foster, Mike Goss and Paul Bolger |
| Electroless Nickel Treatment Process Model, Jan - 2001, Victoria R. Allies and Mark F. Lloyd |
| Advances in the Electrodialysis of Electroless Nickel Baths, Jan - 2001, David Crotty, Ph.D. |
| Optimizing Chromium Remediation, Jan - 2001, Judy Fassbender |
| Innovative Technologies for Chromium Remediation, Jan - 2001, Jennifer Ronk |
| A Closed-Loop Recovery Process for Plating Wastes Based on Insoluble Hexavalent Chromium, Jan - 2001, Jeffrey A.Sturgill and Joseph T.Swartzbaugh |
| Membrane Electrolysis as Rejuvenation Method for Hard Chrome Plating Solutions, Jan - 2001, Jim Beninati |
| Development of a Zero-Emission Process for Electroplating Operations, Jan - 2001, Rakesh Govind, Susheel Yadav and Ramesh Melarkode |
| Studies on Eliminating Aerosol Emissions from Electroplating Tanks, Jan - 2001, Susheel Yadav, Rakesh Govind, and Ramesh Melarkode |
| Investigation of a Functional Trivalent Chromium Plating Process, Jan - 2001, R.P. Renz, E.J. Taylor, & M.E. Inman |
| A New Alternative to Decorative Chrome Plating, Jan - 2001, Frank Dunigan |
| Chromium Alternatives, Jan - 2001, Jim Menturweck |
| Cr(VI)-Free Post-Treatment Processes for Zinc & Zinc Alloys, Jan - 2001, Claudia Andrle, Birgit Sonntag, Roland Vogel & Martin Silomon |
| The Use Of Chromate-free Passivates & Passivate Sealers On Zinc And Zinc Alloys., Jan - 2001, Paul Upton |
| Nickel Plating, Past, Present and Future., Jan - 2001, George Shahin |
| Bright Nickel Solution Maintenance &Purification, Jan - 2001, Gene Torcoletti and Dr.Donald Snyder |
| Alternatives to Nickel Coatings: Are they Needed and What Are They?, Jan - 2001, E. W. Brooman, A. J. Kesslak, and M. A.B. Pavlik |
| Surface Preparation—Meeting & Exceeding Today's Requirements, Mar - 2001, Stephen F. Rudy, CEF |
| Selection & Application of Inorganic Finishes Anodic Coatings for Aluminum—Part I , Mar - 2001, Dr. James H. Lindsay, Jr., AESF Fellow |
| MP&M Fallout, Mar - 2001, Frank Altmayer, CEF |
| The Effect of Chromium Contamination In a Tin Plating Bath, Mar - 2001, Dr. Joseph A. Abys |
| OSHA's New Ergonomic Standard, Mar - 2001, Joelie Hill, CEF |
| Internet Strategy, Mar - 2001, Travis Stirewalt |
| The 15th Meeting of ISO/TC 107, Mar - 2001, Dr. George A. DiBari |
| Plating Mysteries: Part 2, Mar - 2001, Jack W. Dini |
| Acquisition of Electronics Metallization Technology, Mar - 2001, Dr. Jennings Taylor |
| Reactive Plasma Stripping, Mar - 2001, Donald M. Mattox |
| Hard Chromium Plating From Trivalent Chromium Solution, Mar - 2001, G. Hong, K.S. Siow, G. Zhiqiang & A.K. Hsieh |
| Efficient Trivalent Bath For the Recovery of Chromium, Mar - 2001, A. Deep, P. Malik, B. Gupta & S.N. Tandon |
| A Novel Method of Controlling Metal Deposition During a Pulse Plating Process, Mar - 2001, M. Gladstein & H. Guterman |
| Selection & Application of Inorganic Finishes: Anodic Coatings for Aluminum—Part II, Apr - 2001, Dr. James H. Lindsay, Jr., AESF Fellow |
| What Can Be Done to Fix MP&M?, Apr - 2001, Frank Altmayer, CEF |
| Wastewater Treatment & Recycling Panel Provides Forum for Further Discussion Of MP&M & Other Concerns*, Apr - 2001, P&SF |
| Hazardous Waste Survival Tips, Apr - 2001, Martha S. Martin, CEF, CECM |
| How Toxic Are Toxic Chemicals in Soil?*, Apr - 2001, Jack W. Dini |
| Pasteur's Quadrant & the Acquisition of Innovative Technology, Apr - 2001, Dr. Jennings Taylor |
| Applying an Environmental Awareness To Quality Cleaning Techniques & Practices, Apr - 2001, Patrick A. Scalera, CEF & Lawrence R. Carlson, CEF |
| Protecting Your Brand Online, Apr - 2001, Travis Stirewalt |
| Plasma Technology: Arcs, Microarcs & Flashovers, Apr - 2001, Donald M. Mattox |
| 2001: A Plating & Surface Finishing Odyssey The Journey Continues, Part 3, Apr - 2001, Stephen F. Rudy, CEF |
| 2001: Una odisea en el mundo del acabado de superficies (Enero 2001), Apr - 2001, Stephen F. Rudy, CEF |
| Alloys at Low Nickel-release: Pd-Ni Coatings on Copper, Apr - 2001, G. Moretti, F. Guidi & R. Tonini |
| Evaluation of an Electroless Nickel Interlayer On the Fatigue & Corrosion Strength Of Chromium-plated AISI 4340 Steel, Apr - 2001, M.P. Nascimento, H.J.C. Voorwald, R.C. Souza & W.L. Pigatin |
| Developments in Platinum Electroplating: P & Q Salt Solution Optimization, Apr - 2001, S. E. Hadian and D. R. Gabe |
| Selection & Application of Inorganic Finishes: Barrier Layer Protective Metal Deposits, Apr - 2001, Fred Pearlstein & compiled by Dr. James H. Lindsay, AESF Fellow |
| Orlando Jobshop Looks to Future & Expands Finishing Operations, May - 2001, P&SF |
| Comments on Proposed MP&M Rule, May - 2001, Frank Altmayer, CEF |
| Where Are the Customers?, May - 2001, Travis Stirewalt |
| Cyanide: Watch What You Eat & Breathe, May - 2001, Jack W. Dini |
| Dyeing Anodized Aluminum, May - 2001, Mark Jozefowicz |
| Plasma Technology: Plasma Chemistry, Etching & Deposition*, May - 2001, Donald M. Mattox |
| 2001: A Plating & Surface Finishing Odyssey The Journey Continues, Part 4, May - 2001, Stephen F. Rudy, CEF |
| Solderability & Wirebonding Performance Of Nickel/Palladium-plated Leadframes, May - 2001, Dr. Joseph A. Abys |
| The Effect of Direct-reverse Pulse Parameters On the Morphology & Corrosion Resistance Of Nickel Deposits, May - 2001, C. Yang, Z. Yang, M. An, J. Zhang, Z. Tu & C. Li |
| In situ Measurement of the Mixed Potential Of Electroless Copper Deposition, May - 2001, S.-C. Kou & A. Hung |
| Electrodeposition of Gradient Zinc Alloys, May - 2001, E.C. Lee, J.G. Ahn & C.I. Ma |
| Throwing Power Measurement: The Assaf Cell, May - 2001, D.R. Gabe, M. Ward & Y. Assaf |
| Selection and Application of Inorganic Finishes: Metal Deposits for Specialized Characteristics—Part 1, Jun - 2001, Fred Pearlstein & James H. Lindsay, AESF Fellow |
| Old News is Bad News, Jun - 2001, Travis Stirewalt |
| Clusters, Jun - 2001, Jack W. Dini |
| Electrolytic Coloring: A Primer, Jun - 2001, Charles A. Grubbs |
| Pulsed Power Technology—Part I: Technology Overview, Jun - 2001, Enrique Gutiérrez, Jr. |
| Water & Water Vapor, Jun - 2001, Donald M. Mattox |
| 2001: A Plating & Surface Finishing Odyssey The Journey Continues, Part 5, Jun - 2001, Stephen F. Rudy, CEF |
| The Structure & Microhardness Of Ni-Fe-P & Ni-Fe-P-B Alloy Deposits Prepared by Electroless Plating, Jun - 2001, L. Wang, L. Zhao, G. Huang, X. Yuan, B. Zhang & J. Zhang |
| Evaluation of the Phosphorus Content Of Electroless Nickel Coatings by XRD & DSC, Jun - 2001, Y. Xiang, W. Hu, X. Liu & S. Luo |
| The Electrochemical Behavior & Lifetime Of a Hot-Dip 5-Wt% Al-Zn Coating In Chloride Environments, Jun - 2001, H.C. Shih, J.W. Hsu, C.N. Sun & S.C. Chung |
| Effect of Temperature & Bulk Stirring On Electroplating of Brass From Pyrophosphate Electrolyte, Jun - 2001, K. Johannsen |
| Environmental Management Systems: An Implementation Guide for Small and Medium-Sized Organizations, Jun - 2001, Philip J. Stapleton,
Margaret A. Glover and S. Petie Davis |
| Research Findings to Date From the National Database on Environmental Management Systems, Mar - 2001, |
| MID Technology: New Applications, Materials, Plating Concepts, Jul - 2001, Wera Leonhard & Dr. Ellen Maaßen |
| Selection & Application of Inorganic Finishes: Metal Deposits for Specialized Characteristics-Part II*, Jul - 2001, Fred Pearlstein & compiled by Dr. James H. Lindsay |
| Training Columbo Returns: Why Are Some Metals Colorful?, Jul - 2001, Frank Altmayer, CEF |
| Analysis of Adhesion Failures of Thermally Treated Tin-plated Copper Using AES, Jul - 2001, Dr. Joseph A. Abys |
| Illegal CFCs, Jul - 2001, W. Jack Dini |
| Agitation for Anodizing: It's All About Surface Area, Jul - 2001, Gary Kriesch |
| Managing Innovation ... The Science of Creativity?, Jul - 2001, Dr. E. Jennings Taylor |
| Pulsed Power Technology: Pulse Transition Characteristics*, Jul - 2001, Enrique Gutiérrez, Jr. |
| 2001: A Plating & Surface Finishing Odyssey The Journey Continues, Part 6, Jul - 2001, Stephen F. Rudy, CEF |
| Bondability & Solderability of Neutral Electroless Gold, Jul - 2001, J.L. Fang |
| A Comparison of Alkaline Zinc Plating With Potassium & Sodium Salts, Jul - 2001, D.E. Crotty |
| Gold Wire Bonding To Nickel/Palladium Plated Leadframes, Jul - 2001, C. Fan, C. Xu, J.A. Abys, A. Blair & V. Chinchankar |
| Evaluation of a Printable Catalyst for Use in Flex-Circuit & PCB Applications, Jul - 2001, A. Kuruganti, K.S. Chen & E.E. Kalu |
| Acid Copper-Application & Keys to Consistency*, Sep - 2001, Larry T. Rudolph & James H. Lindsay |
| Hard Chrome Jobshop in Tennessee Has Big Plans for the Future, Sep - 2001, |
| More on MP&M, Sep - 2001, Frank Altmayer, MSF |
| Pulsed Power Technology: Peak, Average & RMS Defined, Sep - 2001, Enrique Gutiérrez, Jr. |
| The Identification of Particulate Surface Contaminants Using SEM/EDS, Sep - 2001, Dr. Joseph A. Abys |
| AESF's OSHA Committee & the Past 30 Years, Sep - 2001, Michael Philipp & Philip A. Platcow, CIH |
| Location, Location, Location, Sep - 2001, Travis Stirewalt |
| 2001: A Plating & Surface Finishing Odyssey The Journey Continues, Part 7, Sep - 2001, Stephen F. Rudy, CEF |
| TRI Reporting Threshold Lowered For Lead & Lead Compounds, Sep - 2001, Jeff Hannapel |
| Nature's New Chemical, Sep - 2001, Jack W. Dini |
| History of Vacuum Coating-Sputter Deposition: Early Efforts, Sep - 2001, Donald M. Mattox |
| Advancing Innovation-Is There a Role for AESF?, Sep - 2001, Dr. E. Jennings Taylor |
| Fundamental Aspects of Alloy Plating, Sep - 2001, Dr. D. Landolt |
| Rapid Spectrometric Determination of Ni(II) In Electroless Nickel Deposition Baths Containing Iron, Sep - 2001, R. Liu, C. Gao, S. Hua, Y. Feng, & J. Yang |
| Troubleshooting Decorative Electroplating Installations, Part 4: Plating of Non-conductors, Sep - 2001, N.V. Mandich, CEF & D.W. Baudrand, CEF |
| Process for Autocatalytic Brass Plating On Zamak Alloys, Sep - 2001, C. Dominguez, M.V. Moreno, A. Aguilar-Elguézabal |
| Improving Performance
Of Decorative Chromium Plating Baths, Oct - 2001, Joseph P. Branciaroli |
| Advice and Council: P2 Technology for Barrel Plating, Oct - 2001, Frank Altmayer |
| The Chat Room: Oh, That Nasty Spam!, Oct - 2001, Travis Stirewalt |
| Enviroscope: Toxic Organic Management Plans:
Pleasing the Powers That Be & Staying Sane, Oct - 2001, Julie C. Rogers |
| Fact or Fiction: Amazing Bacteria, Oct - 2001, Jack Dini |
| Health and Safety: Making Health & Safety Work for You, Oct - 2001, Philip A. Platcow |
| Finisher's Think Tank: 2001: A Plating & Surface Finishing Odyssey
The Journey Continues, Part 8, Oct - 2001, Stephen F. Rudy |
| SVC Topics: Surface & Film Characterization:
Film Adhesion & "De-adhesion", Oct - 2001, Donald M. Mattox |
| Troubleshooting Decorative Electroplating
Installations, Part 5: Plating Problems Caused
By Heat & Bath Temperature Fluctuations, Oct - 2001, N.V. Mandich |
| A Review of Acid Copper Plating
Bath Life Extension & Copper Recovery
From Acid Copper Baths, Oct - 2001, D. Bless |
| Influence of Selenium-containing
Additives on the Electrodeposition
Of Zinc-Manganese Alloys, Oct - 2001, B. Bozzini, E. Griskonis, A. Sulcius & P.L. Cavallotti |
| Isotropic Finishing of Helicopter and Turboprop Gearbox Components, Aug - 2001, William P. Nebiolo |
| Jet Engine Overhaul Environmental Management System 14001, Aug - 2001, Larry McCarthy |
| Deep Cryogenic Treatment of Materials for Aerospace Applications, Aug - 2001, Joseph Shenosky, A. Alan Swiglo, Ali Manesh |
| The Propulsion Environmental Working Group (PEWG) Influences Environmental Operations &Compliance Strategies At Industrial Sources &Federal Facilities, Aug - 2001, Frank T.Ivancic, Robert E.Bondaruk, Charles H.Alford & Penny P.Kretchmer |
| Hydrogen Embrittlement in Coating Technology ‐
Measurement & Testing, Aug - 2001, Dr. W. Paatsch & V.-D. Hodoroaba |
| Status Report on Non-line-of-sight (NLOS) Hard Chromium Alternatives, Aug - 2001, T.Naguy, M.Klingenberg, M.Neidbalson, M.Pavlik & D.Schario |
| ACID CLEANING OF AIRPLANE FUSELAGE PRIOR TO PAINTING, Aug - 2001, Thomas Stewart |
| Formulation and Evaluation of Chemistries for Cleaning Applications, Aug - 2001, Rick Reynolds |
| Aircraft Engine Parts Washwater Recycling System -- An EPA ETV-MF P2 Technologies Center Test Report, Aug - 2001, Donn Brown,P.E. & Dr.A.Gus Eskamani |
| Status of DoD Program on Replacement of Hard Chrome Plating With Thermal Spray Coatings on Aircraft Components, Aug - 2001, Bruce D.Sartwell |
| The manufacturing of carbide materials for HVOF, Aug - 2001, Dipl.Ing. Falko Fischer |
| Optimization of Precision Grinding Process, Aug - 2001, Michael Nanlawala, Dr. Ali Manesh, P.E. & Pankaj Patel |
| Materials Of Concern For Gas Turbine Propulsion Systems, Aug - 2001, Glenn Welcher |
| Improvements in Blasting Process Media, Aug - 2001, Raymond Williams |
| Anodizing of Castings, Aug - 2001, Dr. Jean Rasmussen |
| In Tank Removal of Hard Chromium Plating Contaminants, Aug - 2001, David R. Stewart, Ph.D., PE, Paul Thoen, PhD, Tom Grove |
| Improved Threaded Fastener Coatings for Turbine Engines, Aug - 2001, Dr.Paul Sutor |
| Technology Use at Tinker AFB, Aug - 2001, Geri Hart & Linda Basinger |
| Productivity Improvements With a New Vapor Degreasing Cleaning Process At Williams International, Aug - 2001, Roger Evans, John Hoffman & B. Carroll Smiley |
| Insights Regarding the Adhesion Mechanism for Supplementary Organic Coatings on Porous Anodic Films, Aug - 2001, J. M. Runge, Ph.D. and A. J. Pomis |
| Recycling Wax:What are the Benefits?, Aug - 2001, Carol Eden |
| A Step-by-step Approach for Specifying & Designing an Engine Overhaul Cleaning System, Aug - 2001, Greg Heilman |
| Coatings Applied by High Enthalpy Plasma Spraying with Axial Feed, Aug - 2001, L. B. Delcea & L. C. George |
| Important New Tools for Plating & Anodizing Engineering, Aug - 2001, Roger Mouton and Mark Thede |
| Electrodialysis of Chromic Acid Anodizing Solutions for Bath Maintenance -- An Environmental Technology Verification-Metal Finishing (ETV-MF) Pollution Prevention Center Test Report, Aug - 2001, Chris Start & James Totter |
| Using Aqueous Chemistry to Clean Aircraft Engine Tubing, Aug - 2001, Parky May |
| 21st Century Process Surface Finishing Control at Pratt & Whitney, Aug - 2001, Peter Gallerani, CEF, Brent Pettegrow & William Shively |
| Corrosion protection of aluminum alloys by magnetron sputtering and ion implantation, Aug - 2001, J. Kohlscheen, H.-R. Stock, P. Mayr |
| Powder Coating System Phones Home, Oct - 2001, Diane Frakes |
| EN Process Performance, Oct - 2001, Matthew J. Sisti and Jean LaPlante |
| Mechanical Plating, Oct - 2001, Paul C. Wynn and Jonathon Timms |
| Quality is Job 1, Oct - 2001, Steven R. Kline, Jr. |
| Steps for Safe Hazmat Shipping, Oct - 2001, Prokopis A. Christou |
| Zero-Discharge Cleaning, Oct - 2001, Steven R. Kline, Jr. |
| Quantifying Paint System Performance, Nov - 2001, George Shaw |
| Regulations Report: An Update, Nov - 2001, Christian Richter |
| Vapor Degreasing Medical Parts, Nov - 2001, Win Sabatka |
| UV Powder Reaching New Markets, Dec - 2001, Susan Mitchell |
| Chromium Alternative Solves Problem, Dec - 2001, Daniel Brockman & Michael Wyrostek |
| Selectively Plating Plastics the Seleco Way, Dec - 2001, Beverly A. Graves |
| Up and Running with Hard Coating, Dec - 2001, Steven R. Kline, Jr. |
| Better Bath Management with Meter Controls, Dec - 2001, Craig Henry |
| Reducing Stiffness and Electrical Losses of High Channel Hybrid Nerve Cuff Electrodes, - 2001, Schuettler, M. and Stieglitz, T. and Gross, M. and Altpeter, D. and Staiger, A. |
| Special Advanced Studies for Pollution Prevention. Delivery Order 0065: "The Monitor" - Summer 2000, - 2001, Science Applications International Corp Reston Va |
| Laser Pulse Heating of Gun Bore Coatings, - 2001, Cote, P. J. and Kendall, G. and Todaro, M. E. |
| Waves and Vibrations in Electroplated Piezoelectric Plates and Substrate Systems, - 2001, Lee, Peter C. |
| Replacement of Chromium(VI) in Passivations on Zinc And Zinc Alloys, - 2001, Patricia Preikschat and Dr. Rolf Jansen |
| The Thick Layer Passivation for Zinc and Zinc Alloys Free of Hexavalent Chromium, - 2001, Rolf Jansen and Patricia Preikschat |
| Zinc Nickel Electroplating in the New Millennium, - 2001, |
| CleanTech, - 2001, Salerno, Cheryl |
| Treatment of Electroplating Rinse Solution by Continuous Membrane Extraction and Diffusion Dialysis , - 2001, R. Wódzki, P. Szczepa?ski |
| Recycling Chemicals on the Anodizing Line, - 2001, Paul Pajunen |
| Treatment of Electroplating Rinse Solution by Continuous Membrane Extraction and Diffusion Dialysis, - 2001, R. Wódzki, P. Szczepa?ski |
| The 42nd William Blum Lecture, Fundamental Aspects of Alloy Plating, - 2001, Prof. Dr. Dieter Landolt |
| Electroless Plating Processes Developing Technologies for Electroless Nickel, Palladium and Gold , Jun - 2000, Don Baudrand Consultant for MacDermid, Inc. Waterbury, CT |
| Electroless Nickel: Past, Present And Future , Jun - 2000, Ronald N. Duncan, Palm International, Inc., LaVergne, Tennessee |
| Long-life Electroless Nickel Process by Continuous Regeneration with Electrodialysis , Jun - 2000, Rainer Born, Jens Heydecke & Werner Richtering, Atotech Germany GmbH, Berlin, Germany |
| Simultaneous Protection against Erosion and Corrosion , Jun - 2000, Amnon Vadasz F., Ph.D., P.E., President of C.A. Tecnología Aplicada, San Diego de Los Altos, Edo. Miranda, VENEZUELA |
| Electroless Deposition of Palladium-Nickel-Phosphorous Alloy , Jun - 2000, Prof. Sergei S Kruglikov, Dmitri Yu. Sinyakov, Raissa G. Golov chanskaya, S.S.Kruglikov Consultants, Moscow, Russia |
| High Temperature Heat Treatment Of Electroless Nickel Deposits For Improved Corrosion Resistance and Abrasion Properties , Jun - 2000, Gerald Evarts and Robert Tracy, Occidental Chemical Andy Ethridge, Halliburton Inc. Bill McNabb and Phil Juve, ENP of Louisiana |
| A New Method for In-Situ Plating of Components with Electroless Nickel , Jun - 2000, Ronald N. Duncan, Palm International Inc., LaVergne, Tennessee Werner Richtering, Atotech Deutschland GmbH, Berlin, Germany |
| Finishing Technology into the Millenium , Jun - 2000, Richard K. Mayes, Shipley Ronal, Freeport, NY, USA |
| Marketing/Management Concept for 2000: The Merger of Six Shops In Cross-country Locations Creates Nation's Largest Surface Finishing Company , Jun - 2000, Bruce Bradley, Lombard Technologies, Inc., Bethesda, MD |
| World-class for the New Millennium Through Production Monitoring , Jun - 2000, Howard L. Saunders & Mike Harper, Nashville Wire Products, Nashville, TN |
| WHAT TO DO ABOUT P2 CULTIVATING AN ENVIRONMENTAL MANAGEMENT SYSTEM , Jun - 2000, Author unknown |
| Practical Solutions for Persistent, Everyday Problems , Jun - 2000, Yair Assaf, Bohak PlatingCompany, Holon, Israel |
| Environmental Guide for Texas Metal Finishers, Jan - 2000, |
| Color Sorting Aluminum Alloys For Recycling-Part I, Apr - 2000, P.B. Schultz & R.K. Wyss |
| Wastewater Treatment Forum Addresses Old & New Problems, Apr - 2000, no author given |
| Improving Powder Coatings' Corrosion Protection, Jan - 2000, Kuruvila Varughese |
| The Regulatory Framework: Trends, Challenges & Opportunities in the New Millenium, Jan - 2000, Christian Richter & Al Collins |
| Strategic Goals Accomplishments: Collaboration Wins, Jan - 2000, Robert Benson |
| The Crystal Ball: The Future of Innovation is in the States, Jan - 2000, Peter Wise, Terry Fabian, Linda Wiese |
| Keynote Address (invited speaker), Jan - 2000, J. Charles Fox |
| In the Trenches of Strategic Goals: Making It Work at the Local Level, Jan - 2000, David Jacobs, John Chamalian, & Rich Sustich |
| Surface Finishing Environmental Benchmarking Study: Trends & Implications, Jan - 2000, George Cushnie & Edie Wiarda |
| ISO 14000 & Environmental Management Systems: The Future?, Jan - 2000, Laura Bloch |
| Environmental Technology Verification for Metal Finishing, Jan - 2000, Alva Daniels & James E. Voytko |
| EPA's Metal Finishing Facility Risk Screening Tool (MFFRST): Part 1, Status & Update, Jan - 2000, Matthew Lorber, Paul Shapiro, Greg Schweer, Stephen Schwartz, Charles Peck & David Bottimore |
| EPA's Metal Finishing Facility Risk Screening Tool (MFFRST): Part 2, Updates to Source Emission Characterization, Jan - 2000, Stephen Schwartz & Matthew Lorber |
| Risk Screening of Chemicals in the Absence of Data, Jan - 2000, Ihab H. Farag, Melissa Waleryszak, William T. Waugh & Maggie Wilson |
| Integrated Plant Model for Maximum Waste Reduction in Cleaning & Rinsing Operations, Jan - 2000, H.H. Lou & Prof. Yinlun Huang |
| Surface Finishing Government Relations Update & Regulatory Overview, Jan - 2000, Christian Richter & Al Collins |
| Resource Conservation & Recovery Act: F006 Regulatory Update, Jan - 2000, Kristina Meson |
| Clean Water Act: Metal Products & Machinery Rule, Jan - 2000, Shari Zuskin |
| Clean Water Act: Industrial Pretreatment Streamlining Rule, Jan - 2000, Guy Aydlett |
| Clean Air Act: Regulatory Update, Jan - 2000, Laura McKelvey |
| Non-line-of-sight Hard Chromium Alternatives, Jan - 2000, T. Naguy, M. Klingenberg, M. Pavlik & D. Schario |
| A New Ni-Fe-Co Alloy Substitute for Chromium Plating, Jan - 2000, Wenhua Hui |
| A New Alternative for Decorative Hexavalent Chromium Plating, Jan - 2000, Blair Vandivier |
| Hard Chrome Alternatives Team Update Improving Performance While Reducing Cost, Jan - 2000, Keith Legg & Bruce Sartwell |
| MFASC-SCAQMD Nickel Electroplating Emissions & Control Technology Study, Jan - 2000, M. Dean High |
| Choosing Options for a Washer, Jan - 2000, Harish A. Bhatt |
| Case Study: Integrated Water Recycling System for Semiconductor Manufacturer Reduces Consumption by 15.8 Million Gallons/Yr, Jan - 2000, George Sendrey |
| Estimating Chemical Air Emissions from Solutions in Process Tanks at a Plating Jobshop Using a Timely & Inexpensive Method, Jan - 2000, James C. Tobin |
| IPC's Health & Safety Audit Form, Jan - 2000, Joan Girard |
| Rinsewater Recycle Design & Operations, Jan - 2000, Gregory R. Allan & Charles M. Babb |
| A Review of Nickel Plating Bath Life Extension, Nickel Recovery & Copper Recovery from Nickel Baths, Jan - 2000, Diana R. Bless |
| Elimination of Chromates in Paint Preparation, Jan - 2000, Richard H. Buchi & Clyde J. Gowers |
| Validation of a Functional Trivalent Chromium Plating Process, Jan - 2000, R.P. Renz, P.O. Miller, E.J. Taylor & C.D. Zhou & R.A. Richardson |
| Machine Cutting Fluids Environmental Problem or Improvement Opportunity?, Jan - 2000, Thomas Schoonover |
| Corrosion Performance of Environmentally Acceptable Alternatives to Chromium Coatings, Jan - 2000, D.A. Schario, M.A. Pavlik, M.L. Klingenberg & E.W. Brooman |
| Vacuum Deposition of Chromium as an Alternative to Hexavalent or Trivalent Chromium Plating, Jan - 2000, Dr. Brent Lee & Stephen M. Koelzer |
| Wastewater Treatment Panel of Experts, Jan - 2000, Frank Altmayer, Lyle Kirman, Jeffrey R. Lord, Dr. Fred Reinhard |
| Using Information Technology to Benchmark Environmental Performance, Jan - 2000, Glenna Ford |
| The Application of Membrane Technology as an Element of Business Competitive Advantage, Jan - 2000, James A. Bilgo, Eric D. Fessler, Kenneth E. Kaszubowski & Robert F. Peschel |
| The Ion Exchange Resource Recovery Business, Jan - 2000, Peter Meyers & Larry Gottlieb |
| Economics of Health & Safety, Jan - 2000, Philip A. Platcow |
| Development & Implementation of an ISO 14001 Environmental Management System: The Advantages of Becoming ISO 14001 Certified, Jan - 2000, Jeffrey A. Hedges |
| Aqueous Cleaner Recycling at Raytheon Missile Systems Company, Jan - 2000, Paul Fecsik & Lyle Carman |
| Purification of Sulfuric Anodizing Bath Using Patented Ion Exchange Technology, Jan - 2000, Mohamed Abid |
| Treatment & Disposal of Spent Electroless Nickel Plating Solutions, Jan - 2000, Dr. David Crotty & Don Baudrand |
| A Sulfamate Nickel Ammonium Removal System, Jan - 2000, Anthony D'Amato |
| Use of Membrane Technologies for Source Reduction & Waste Minimization in the Metal Finishing Process, Jan - 2000, Ken Martins |
| How to Use a Life Cycle Assessment to Its Fullest: The Fundamentals, Jan - 2000, Dr. Wayne E. Bates |
| Implementation Tips, Jan - 2000, Andrea L. Clemencio & Patrick R. Curran |
| Environmental Preparedness, Jan - 2000, Terry Begnoche & John S. Vargo |
| EMS Template for Metal Finishers: EMS Implementation at Several Southern California Sites, Jan - 2000, Laura Bloch, Michael Keefe & Patrick Wooliever |
| Segregated Wastewater Treatment for Environmental Excellence & Cost Effectiveness, Jan - 2000, Paul Eckerson |
| Wastewater Treatment of Combined Electroplating, Powder Coating & E-coat Process Operations That Are All Routed Through a Conventional Flow-through Treatment System, Jan - 2000, Mark E. Andrus |
| Organoclays Reduce P&T Costs, Jan - 2000, George R. Alther |
| The Use of Bromine Chemistry for Sand Filter Disinfection, Jan - 2000, Frederick M. Lehmann |
| Ceramic Microfiltration for Metal Finishing Wastewater Treatment: Lower Costs with Better Removal Efficiency, Jan - 2000, Dr. David R. Stewart, Paul Thoen & Tom Grove |
| In-process Purification of Plating Baths, Jan - 2000, R.P. Renz, P.O. Miller, E.J. Taylor & C.D. Zhou |
| 3-D Electrolytic Cell Provides New Option for Wastewater Recycle & Waste Minimization, Jan - 2000, B. George Kniazewycz & Charles E. Lemon |
| Removal of Chrome & Creation of a Zero Discharge System Using Electronic Water Purification, Jan - 2000, Robert Atlas |
| An Environmental & Economic Comparison of Ion Exchange & Recently Commercialized Electrochemical Technologies for the Recovery of Rinsewater in a Bright Nickel Plating Facility, Jan - 2000, Dave Szlag & Chris Dillhoff |
| The Effectiveness of Electrocoagulation as an Aid in Wastewater Treatment, Jan - 2000, Jerry C. Brown |
| Bioremediation in Metal Cleaning Applications, Jan - 2000, Barry Williams |
| Cleaning Technology Options ‐ Achieving Zero Discharge, Jan - 2000, Rick Reynolds |
| Aqueous Based Cleaners and the Potential Impacts on Industrial Wastewater, Jan - 2000, Wayne Bates, Christopher Walton |
| Electrochemical Treatment of Spent Electroless Nickel Solution, Jan - 2000, Rudy Macko |
| Cleaning the Cleaners With Microfiltration, Jan - 2000, Stephen Perrone, Richard Heller |
| Elimination of Chromates In Paint Preparation Elimination of Chromates In Paint Preparation, Feb - 2000, Richard H. Buchi, Ken Paterson & Clyde J. Gowers |
| Shop Talk: Practical Information for Finishers Shop Talk: Practical Information for Finishers: Automated Bath Maintenance, Feb - 2000, J.P. Bougneit & C.A. Henry |
| Can a Plating Shop Operate Without Vapor Degreasers- Even for Wax Coatings?, Feb - 2000, Carol Eden |
| Aerospace/Airline Forum Attendees To Tour GE Aircraft Engines- World Headquarters for Leader in Jet Propulsion Technology, Feb - 2000, P&SF Editor |
| Advice & Counsel: Training "Colombo"-Part XI Carbonates & Cyanide Solutions, Feb - 2000, Frank Altmayer |
| Finishers' Think Tank The Past: Alive & Well in the Future, Feb - 2000, Stephen F. Rudy |
| Fact or Fiction?: Biomonitors Fact or Fiction?, Feb - 2000, Jack W. Dini |
| SVC Topics: The Return of the Piston Pump SVC Topics, Feb - 2000, Donald M. Mattox |
| Pulse Plating: To PCB or Not to PCB ..., Feb - 2000, Steve Koelzer |
| Hands-on Management Hands-on Management: ISO 14000 Compliance Demanded by Ford & GM, Feb - 2000, Fred Mueller |
| Use of Fume Suppressants In Hard Chromium Baths-Quality Testing, Feb - 2000, T.D. Ferguson, M. Zellen, D. Brennan & J. Lutz |
| Derivation and Rapid Spectrophotometric Determination of Iron In Electroless Nickel Plating Solution, Feb - 2000, R. Liu, C. Gao, S. Hua, J. Yang & Y. Lu |
| The Use of Neural Networks to Identify
Anodizing Process Defects, Feb - 2000, A. W. Brace |
| Women in Plating-Their contributions to the Finishing Industry, Jan - 2000, W. Joan Harrison |
| New Electrolytic Iron Plating Process Provides Tough Coating Without Hazards, Jan - 2000, Charles F. Lowrie |
| Tribute to Abner Brenner 1908-1999, Jan - 2000, Fielding Ogburn |
| Training "Colombo"-Part X Acid Copper (continued), Jan - 2000, Frank Altmayer |
| The Effect of Base Metal Impurities on the Solderability & Wirebonding of Semiconductor Leadframes, Jan - 2000, Joseph A. Abys |
| Making More Waves, Jan - 2000, Steve Koelzer |
| Finishers' Think Tank New Year/New Challenges, Jan - 2000, Stephen F. Rudy |
| Fact of Fiction: Environmental Education, Jan - 2000, Jack W. Dini |
| The Origin of Specifications (& Government Inspectors), Jan - 2000, Fred Mueller |
| SVC Topics: PVD Processes: Mid-frequency Magnetron Sputtering, Jan - 2000, Donald M. Mattox |
| Use of Fume Suppressants In Hard Chromium Baths: Emission Testing, Jan - 2000, T.D. Ferguson, B. Sprague, D. Brennan & J. Lutz |
| Characterization of Chromium Deposits Obtained From Electrochemically Regenerated Electroplating Solutions, Jan - 2000, N.V. Mandich, K. Mondal, J. Pattanayak & S.B. Lalvani |
| Fugitive Emission Measurements Above a Hard Chromium Plating Tank Using Spark-Induced Breakdown Spectroscopy (SIBS), Jan - 2000, M.E. Fraser, T. Panagiotou, A.J.R. Hunter, E.B. Anderson, S.J. Davis, G. Braybrooke & K.J. Hay |
| The Use of Personal Computers In Metal Finishing, Jan - 2000, Arthur W. Brace |
| Managing the ISO Secretariat: You Should Take It Personally, Mar - 2000, Paul Frank |
| Electrochemical Treatment of Spent Electroless Nickel Of EN Waste Solution, Mar - 2000, Rudy Macko & Tom Mason |
| Control of Damascene Copper Processes By Cyclic Voltammetric Stripping, Mar - 2000, Peter Bratin, Gene Chalyt & Michael Pavlov |
| Shop Talk: Practical Information for Finishers Basics of Filtration, Mar - 2000, Jack H. Berg |
| Member Profile: Member Profile: Wichita Plater Rewarded for Hard Work, Mar - 2000, P&SF Editor |
| Advice and Council: Training "Colombo"-Part XII An Alternate Chloride Procedure, Mar - 2000, Frank Altmayer |
| Analytical Techniques for Problem Solving: The Effect of Carbon Content on the Solderability/ Reflowability of Tin & Tin-Lead Electrodeposits, Mar - 2000, Joseph A. Abys |
| Circuit Circuit Technology: High-density Interconnection Surface Finish Issues, Mar - 2000, James P. Langan |
| Pulse Plating: Pulse Barrel Plating Pulse Plating, Mar - 2000, Steve Koelzer |
| Finishers' Think Tank: Glitches in Every Direction; Problems in Any Possible Way, Mar - 2000, Stephen F. Rudy |
| SVC Topics: A Concise History Of Vacuum Coating Technology, Mar - 2000, Donald M. Mattox, |
| Hands-on Hands-on Management : Preparing for ISO 9000 Begins with Management, Mar - 2000, Fred Mueller, |
| Fact of Fiction?: "Bugs", Mar - 2000, Jack W. Dini |
| Standards Report, Mar - 2000, George A. Di Bari |
| Properties of High-Speed Gold Electrodeposits Applied To Ceramic Electronic Packages By E.D. Winters, J.M. Coronati, D.N. Braski & T.R. Watkins, Mar - 2000, E.D. Winters, J.M. Coronati, D.N. Braski & T.R. Watkins |
| Improvement of Adhesion for Layer-to-Layer Connection for Built-up Printed Circuit Boards, Mar - 2000, T. Kobayashi, J. Ishibashi & H. Honma |
| Electrodeposition Behaviors of Solder Bumps from Fluoroborate & Sulfonate Baths By K-L. Lin & K-T. Hsu, Mar - 2000, K-L. Lin & K-T. Hsu |
| Marking on a Transparent Acrylic by YAG Laser Resin, Jun - 2000, Toshihiko SATO, Department of Material Science and Engineering, Shibaura Technical University, Tokyo, JAPAN Yoshizo MARUYAMA, Youichi UEHARA and Teruo TOSHIMA Tokyo Name platers Association ,Tokyo, JAPAN |
| Tin-Zinc Alloy Electroplating and Its Corrosion Behavior, - 2000, K. Wang, H. W. Pickering and K. G. Weil, The Pennsylvania State University, Department of Materials Science and Engineering, University Park, PA 16802 |
| NAMEPLATES BY SAND BLASTING USED CD-ROM DISKS , - 2000, Toshihiko SATO, Masayuki SUZUKI and Yoshihiro IMAI Department of Material Science and Engineering, Shibaura Technical University, Tokyo, JAPAN |
| A NEW GENERATION OF POLLUTION PREVENTION TECHNOLOGY AND ITS APPLICATIONS IN ELECTROPLATING PLANTS, Jun - 2000, H. H. Lou, J. Q. Zhou, and Y. L. Huang* Department of Chemical Engineering and Materials Science Wayne State University Detroit, Michigan 48202 |
| Classification System for Deburring Systems, Jun - 2000, Author unknown |
| Effects of Phenolsulfonate on the Electrolyte, Plating Efficiency and the Deposit, Jun - 2000, J. H. Cho, T. Y. Kim, D. C. Bae & J. R. Lee Coating Technology & Electriccal Steel Research Group, Technical Research Laboratories, Pohang Iron & Steel Co., Ltd., Pohang, Korea |
| Passivation of Stainless Steels , Jun - 2000, Hamish Hunt, Global Stainless Technology Inc, Toccoa, GA. |
| AUTOMATIC HOIST SYSTEMS UTILIZED IN METAL FINISHING: PAST AND PRESENT , Jun - 2000, Tom Brady, KCH Services, Inc., Brockton, MA |
| Rapid Cycle Vacuum Deposition Techniques & Materials - A Plating Alternative , Jun - 2000, G. Vergason, S. Gaur, Vergason Technology, Inc., Van Etten, New York |
| A Business Strategy for Electric Power Deregulation, Jun - 2000, Dr. Kenneth Saulter, Michigan Manufacturing Technology Center, Ann Arbor, MI |
| On-line Monitoring of Copper Interconnect Deposition Processes , Jun - 2000, Hanna Wikiel and Kazimierz Wikiel, Technic, Inc., R&D, Cranston, RI |
| Formation of Sub-micron Scale Features Using Electroplated Copper , Jun - 2000, Jonathan Reid and Steven Mayer Novellus Systems, Portland Technology Center, Wilsonville, OR 97070 |
| Simulation of Copper Electroplating in Damascene Feature , Jun - 2000, |
| Enhanced Copper Electroplating Using High Frequency Acoustic Streaming , Jun - 2000, A. A. Busnaina, C. S. Tiwari and I. I. Suni Clarkson University, Potsdam, NY and V. Reynolds, M. Nakoski, C. Neely, and T. Way Reynolds Tech, Syracuse, NY Introduction |
| Copper Sulfonate Electrolytes for Metallization of Interconnect Technology , Jun - 2000, Nicholas M. Martyak Elf Atochem NA Organic Chemicals 900 First Avenue King of Prussia, PA 19406 and Robert Mikkola Sematech and APRDL, Motorola Austin, TX 78721 |
| THE EFFECT OF CELL GEOMETRY ON DEPOSIT THICKNESS UNIFORMITY IN A WAFER PLATING CELL, Jun - 2000, Allan H. Reed, Technic Incorporated, Cranston, RI 02910 |
| The Mass Transfer Rate of an Array of Rectangular Pins in a Channel Flow Cell , Jun - 2000, Dr. Kan-Lin Hsueh NanoSciences Corporation Lancaster, PA U.S.A. and Marjorie K. Myers Tyco Electronics Harrisburg, PA U.S.A. |
| Electrodeposion of the Interior Surface of 2.0 Inch I.D. Tubes 36 Ft. in Length and Cell Geometry Designed to Generate Plating Waveforms , Jun - 2000, Richard Haynes Richard Haynes Consultants |
| Electroforming Applications in the Fabrication of Advanced Miniature 3-D Structures , Jun - 2000, Don Sedberry & Irina Shvets, Max Levy Autograph, Philadelphia, PA |
| Practical Rules & Tips for Precision Electroforming of Fine-featured Items , Jun - 2000, Irina Shvets & Don Sedberry, Max Levy Autograph, Philadelphia, PA |
| PRECIOUS METAL PROCESS PARAMETERS AND THEIR IMPACT ON METAL DISRIBUTON , Jun - 2000, Steve Daniels, David R. Mason & Patrick H. Stafford |
| A Novel, Highly Acidic, Pure Palladium Strike, Jun - 2000, Dr. C. A. Dullaghan, J. J. Maisano, Oscar Khaselev and J. A. Abys, Electroplating Chemicals & Services, Lucent Technologies, Staten Island, NY |
| A Study on the Surfaces of the Ni-Pd Lead Finishing for the Plastic Package During Semiconductor Assembly Process Steps, Jun - 2000, Joong-Do Kim, Young-Ho Baek, Woo-Suk Choi & Kyoung-Soon Bok Samsung Aerospace Industries, Ltd., Suwon P.O. Box 111, 440-600 Korea |
| Nickel/Palladium Leadframe Surface Finishing New Technical and Economical Developments in , Jun - 2000, C. Fan, A. Blair, L. Mayer and J. A. Abys Lucent Technologies, Electroplating Chemicals & Services 236 Richmond Valley Road, Staten Island, NY 10309 |
| dNi Ductility - A DesiPgned Experiment , Jun - 2000, Dr. C. A. Dullaghan and J. A. Abys, Electroplating Chemicals & Services, Lucent Technologies, Staten Island, NY |
| Solderability and Wirebonding Performance of Palladium-Cobalt Finish , Jun - 2000, C. Fan, B. Stacy, C. Xu and J. A. Abys Lucent Technologies, Electroplating Chemicals & Services 236 Richmond Valley Road, Staten Island, NY 10309 |
| Opening the Line of Communications Technical Assistance and Industrial Pretreatment Regulatory Initiatives , Jun - 2000, James C. McCaughey, P.E., Narragansett Bay Commission, Providence, RI |
| EPA-Industry Program for Verification of Metal Finishing Pollution Prevention Technologies , Jun - 2000, Donn W. Brown, P.E., Concurrent Technologies Corporation, Largo, FL Alva Daniels, U.S. Environmental Protection Agency, Cincinnati, OH James E. Voytko, CEF, Concurrent Technologies Corporation, Largo, FL |
| WASTEWATER CLEANUP WITH CLAY BASED FLOCCULANTS , Jun - 2000, George Alther Biomin, Inc. Ferndale, Michigan U.S.A. |
| MODEL-BASED DESIGN OF A WATER USE AND REUSE SYSTEM IN AN ELECTROPLATING PLANT , Jun - 2000, J. Q. Zhou, H. H. Lou, and Y. L. Huang * Department of Chemical Engineering and Materials Science Wayne State University Detroit, Michigan 48202 |
| A Review of Wastewater Characteristics for Water Reuse/Recycling after Chemical and Equipment Processing, Jun - 2000, Mark E. Andrus Water Treatment Division TASKEM, Inc. Brooklyn Hts., OH |
| Modeling for Rinse Water Reduction, Jun - 2000, W. John Fullen, Boeing Commercial Airplanes, Seattle, WA |
| DIFFERENT SEALING METHODS FOR ANODIZED ALUMINIUM AND NEW SEALING TECHNICS, Jun - 2000, Dr. Xavier Albert Ventura, Laboratory of Electrochemical Research & Development, Integral Centre, Barcelona, Spain |
| Anodic Oxide Film Formation: Relating Technical Properties to Composition and Structure , Jun - 2000, Dr. Jean Rasmussen 1 Jahl Technology Inc. Maribel, Wisconsin, USA |
| Anodic Oxide Film Formation Relating Mechanism to Composition and Structure , Jun - 2000, Jude M. Runge, Ph.D. and Aaron J. Pomis The C.J. Saporito Plating Company, Cicero, Illinois, USA |
| Metallurgy of Magnesium - a Problem in Surface Treatment? , Jun - 2000, Associate Professor Per Moeller, B. Sc. Kirsa S. Pedersen and B. Sc. Michael Oertenblad, The Technical University of Denmark, Lyngby, Denmark |
| Magnesium Anodization Reaction Kinetics , Jun - 2000, Philip Ross & John MacCulloch, Magnesium Technology Licensing Ltd., Auckland, New Zealand |
| Production of an Adhesive Substrate Using Phosphoric Acid and a Continuous Coil Operation , Jun - 2000, Gregory S. Marczak and Philip O. Wakeling, Lorin Industries, Muskegon , MI |
| Base Metal Microstructural Considerations for Aluminum Finishing , Jun - 2000, Jude M. Runge, C.J. Saporito Plating Company, Cicero, IL |
| Developing a Computer Program for Anodizing Aluminum, Jun - 2000, Hans Sellge, Semano Inc, Hayward, CA. |
| Copper Microelectrodeposition: The Influence of Different Additives on Growth in Microprofiles, Jun - 2000, P.L.Cavallotti, R. Vallauri, A.Vicenzo Dip. Chimica Fisica Applicata - Politecnico di Milano Via Mancinelli,7 - 20131 Milan, Italy |
| Electrodeposition of New Magnetic Materials, Jun - 2000, Andreas R. Zielonka & Heidi G. Fauser Forschungsinstitut für Edelmetalle und Metallchemie, Schwäbisch Gmünd, Germany |
| Developments in Platinum Electroplating: P and Q Salt Solution Optimization , Jun - 2000, S.E. Hadian and D.R. Gabe Institute of Polymer Technology and Materials Engineering, Loughborough University, Loughborough LE11 3TU, UK |
| Throwing Power Measurement: the Assaf Cell , Jun - 2000, D.R. Gabe, M. Ward and Y. Assaf * IPTME, Loughborough University, LE11 3TU, UK * Bohak Plating Co. Ltd., Hollon, Israel |
| New Tin-Alloy Electrolytes for the Deposition of Decorative and Functional Layers , Jun - 2000, By Franz Simon, Klaus Leyendecker and Franz Glaser, Degussa Electroplating GmbH |
| The Effect of Pretreatment and Thin Layer Sulfuric Acid AC Anodization on The Corrosion Resistance of 6063 Aluminium Alloys , Jun - 2000, Feriha Serçelik, Istanbul -TURKEY Ali Fuat Çakýr, Istanbul Technical University, - TURKEY Mustafa Ürgen, Istanbul Technical University, , Istanbul - TURKEY David R. Gabe, IPTME, Loughborough University, UK |
| The Effect of Electroplating Bath Composition on the Passivation and Subsequent Corrosion Performance of Zinc Electrodeposits, Jun - 2000, N.D. Cato G.M. Treac, G.D. Wilco & R.Aki IPTME, Loughborough University, Loughborough, UK |
| Some Aspects of Modern Zinc Plating (Process & Equipment) , Jun - 2000, P. Moller Associate Professor The Technical University of Denmark, Lyngby, Denmark and Morten Frydendall (M. Sc.), Arvid Nilsson Group, Vojens, Denmark. |
| High-speed Electroplating of Lead-free Solder, Jun - 2000, Brenda Fernandes & Dr. Kazimierz Wikiel, Technic, Inc., R&D, Cranston, RI |
| Pb-free Component Finishes, Jun - 2000, Rob Schetty, Shipley Ronal, Freeport, NY, USA |
| A Metal Finisher's Evaluation of Commercially Available Lead-Free Solder Coatings , Jun - 2000, Michael J. Brouillard, HHEM, HH Sumco, Indianapolis, IN Raymond O. England Ph.D., HHEM, Handy and Harman Electronic Materials Corp., East Providence, RI |
| Properties of Electroplated Tin & Tin Alloy Coatings, Jun - 2000, Yun Zhang, Chen Xu, Chonglun Fan & J.A. Abys, Electroplating Chemicals & Services, Staten Island, NY |
| Pb- Free Memory Module with Sn-Bi Lead Finish and Sn-Ag-Cu solder Paste, Jun - 2000, Jang Won Han. Samsung Electronics Co. Ltd. Asan-City, Changnam, Korea |
| The Nature of Plating Solution Turbidity and its Effects on Plated Parts , Jun - 2000, Aleli L. Tumibay, Sally V. Barrinuevo and Baby M. Regalado, Analog Devices General Trias, Cavite, Philippines |
| Economic Savings in the Plating Industry Through Recycling & Recovery of Metals from Sludge, Jun - 2000, Dr. Javier Albert Ventura, Laboratory of Electrochemical Research & Development, Integral Centre, Barcelona, Spain |
| The Advantages & Drawbacks of the EPA's Coating & Composites Coordinated Rule Development, Jun - 2000, Bill Roth-Evans, Trinity Consultants, Inc., Overland Park, KS |
| Using a Recycling Facility for Metal-Bearing Plating Waste , Jun - 2000, Tim Cimperman, Inmetco, Ellwood City, PA |
| Innovative Chromium Remediation Technologies, Jun - 2000, Jennifer J. Ronk, Applied Environmental Solutions, Milwaukee, Wisconsin |
| Chromium Remediation Case Studies, Jun - 2000, Judy Fassbender, Applied Environmental Solutions, Inc., Oconomowoc, WI |
| Reduce Pressure Filter Cycle Times and Stop Buying Presses , Jun - 2000, John Seldon, Temporary Operations & Maintenance Inc., Waterloo, Ontario Canada Al Bates, Robin Leach, Kuntz Electroplating Inc., Kitchener, Ontario, Canada |
| Environment, Health & Safety Technology Review , Jun - 2000, Alan V. Carter, Scott R. Smith Environmental Management Consultants, Inc., Lexington, KY |
| HEA - HIGH EFFICIENCY ANODIZING A Unique & Progressive System Designed to Produce High-Speed, High-Throughput Anodizing, Jun - 2000, Dr. Enzo Strazzi and Silvia Bellei Research and Development Laboratory Italtecno S.r.l. Modena, Italy |
| Improving Engineering Properties of Anodic Films Through Microstructural Modification, Jun - 2000, Aaron J. Pomis and Jude M. Runge, C.J. Saporito Plating Company, Cicero, IL |
| Interference Coloring for Architectural & Special Applications, Jun - 2000, Dr. Walter Dalla Barba & Mr. Fabio Vincenzi Italtecno S.r.l., Modena, Italy; & Dennis G. Duncan, Aluminum Finishing Division-North America, Chemetall Oakite, Berkeley Heights, NJ |
| Performance Results for Sealed Type III Anodic Oxides , Jun - 2000, Tami Westre, B. Rachel Cheng, Ling Hao, and Sjon Westre METALAST International, Inc., Minden, NV |
| Depth Profile of the Wear Resistance of Anodic Coatings Formed by Current Control Anodizing on Aluminum Alloys , Jun - 2000, B. Rachel Cheng and L. Hao METALAST International, Inc., Minden, NV 89423 |
| Theoretical & Practical Aspects of Direct Nickel Plating on Aluminum for Electrical Connectors, Jun - 2000, J.S. Safrany & G. Columbier, Pechiney Centre de Recherche de Voreppe, France & B. Loreau, Aluminium Pechiney, France |
| Ion vapor-deposited Aluminum Coating inside the Hollow Tube , Jun - 2000, Sik-Chol Kwon, W-S. Baek, G-H. Lee K. and G.Masui Surface Technology Department, Korea Institute of Machinery & Materials |
| Applications of Nickel Matrix Composite Coatings in Textile Industry Equipment , Jun - 2000, P. Gyftou, E. Pavlatou and N. Spyrellis, Laboratory of General Chemistry, Chemical Engineering Department, National Technical University of Athens, 9 Iroon Polytechniou Str., Zografos Campus, Athens 15780, Greece |
| Kinetic of Manganese Electrodeposition Reaction , Jun - 2000, Tamaz Agladze, Maia Gabrichidze,Marina Mdivani |
| Electrodeposition of Intermetallics of Ag, Cu and Au with Sn , Jun - 2000, P. L. Cavallotti, M. Bestetti, L. Magagnin, L .Nobili, A. Vicenzo Dip. Chimica Fisica Applicata - Politecnico Milano Via Mancinelli,7 - 20131 Milano, Italy |
| Fluid Flow, Potential and Concentration Distributions in Electrochemical Processes , Jun - 2000, G. Nelissen, B. Van Den Bossche, A. Van Theemsche, J. Deconinck Vrije Universiteit Brussel, Department of Electrical Engineering TW/ETEC In this paper a software tool called ELSY + |
| Bright "white" Rhodium Plating of Decorative Components, Jun - 2000, S.Burling & D.Markey, E-CLAL UK, G.Bolli, E-CLAL Italy and S.Hemsley, E-CLAL Singapore |
| Corrosion Resistance and Microstructure of Electrolytic Zinc Composite Coatings , Jun - 2000, Frank Fontenay, Per Møller and Lasse B. Andersen, Department of Manufacturing Engineering, Technical University of Denmark, Lyngby, Denmark. |
| Electroless Gold for Micro and Macro Electronic Applications , Jun - 2000, S.Burling, E-CLAL UK and K.Shiokawa, NECC Japan |
| Morphological and Hardness Properties of Bright and Leveled Silver Electrodeposit , Jun - 2000, O.A. Ashiru, SABIC Technology Center, Jubail, Saudi Arabia |
| Quantitative Characterization of Rhodium and other Platinum Group Metal Electrodeposits. , Jun - 2000, Alan Blair, Michael Ammerman, Chen Xu & Joseph Abys Lucent Technologies EC&S |
| Corrosion Behavior of Electroless Nickel Coatings in Concentrated Salt Solutions , Jun - 2000, Sudarshan Lal FCI Electronics (USA), Inc. |
| An Overview of Surface Analysis Techniques and It's Practical Application in Electroplating Industries , Jun - 2000, C. Xu, C. Fan, Y. Zhang and J.A. Abys EC&S Staten Island, NY |
| Laser-Induced Selective Deposition of Pt on p-Silicon Wafers , Jun - 2000, Cui Qiming Shanghai Institute of Measurement and Testing Tech., Shanghai, P.R.C. Yu Zuzhan Department of Chemistry, FUDAN Univ., Shanghai, P.R.C. |
| Electroless Plating Process For High Density Ceramic Packages & MCM-C Substrates , Jun - 2000, Xia Chuanyi,Hebei Semiconductor Research Institute,China |
| Cathodic Adsorption Mechanisms of Typical Leveling and Brightening Agents: A Re-visit , Jun - 2000, O.A. Ashiru, SABIC Technology Center, Jubail, Saudi Arabia |
| Electrodeposition of Heat-Treatable Ni-P-Al2-O3 Composite Coatings, Jun - 2000, Raj Narayan. Dept of Materials & Metallurgical Engineering. Indian Inst. Of Tech. Kampur 208016 India |
| Combination of Pulse- & Constant-current Plating for the Creation of Desirable Surface Microgeometry , Jun - 2000, Dr. Sergei S. Kruglikov, S.S. Kruglikov Consultants, Moscow, Russia Paul Becker and Orion Jankowski*, Tyco International, Menlo Park, Ca |
| Use of Experimental Design in the Optimization of Electroplating Solutions , Jun - 2000, George E. Shahin C.E.F. Atotech USA Inc. Rock Hill, South Carolina |
| Adhesion Testing of Hard Chromium Electrodeposits , Jun - 2000, Dr. Allen R. Jones, Seiho Sugawara, and Dr. Jack Enloe, Atotech, Rock Hill, SC |
| Gear Reclamation by Hard Chromium Plating - A Case Study , Jun - 2000, Dr. C.K.B. Nair, Heavy Vehicles Factory, Avadi, Chennai, India -600 054 |
| Electrocoat & Phosphate Process for Parts Manufacturing with a Computerized Program for QS 9000 Standards & First-run Capability , Jun - 2000, Walt Wick, IPC Consultants, Beverly Hills, MI & Wes Amann, MicroMain Inc., Austin, TX |
| Fast and Accurate Deposit Internal Stress Determination , Jun - 2000, Berl Stein, CEF, NiCoForm, Inc., Rochester, NY |
| Instrument for Continuous Monitoring of Individual Anode Currents in a Plating Bath , Jun - 2000, Fred Dyer, Catherine W. Dyer & Roger Derby, Industrial Instruments, Inc., Newport News, VA |
| The Application of Electrodeless Conductivity Measurement in Chemical Process Control for Surface Finishing , Jun - 2000, Charles T. Johnson, Walchem Corporation, Holliston, MA |
| New Manufacturing Concepts with Line-integrated Plating Process , Jun - 2000, Dr. H. Holeczek & T. Bolch, Fraunhofer Institute for Manufacturing Engineering & Automation, Stuttgart, Germany |
| MID-Technology: New Applications, Materials, Plating Concepts , Jun - 2000, Wera Leonhard, Fraunhofer-Institut für Produktionstechnik und Automatisierung (IPA), Nobelstraße 12, D-70569 Stuttgart; Dr. Ellen Maaßen, AHC-Oberflächentechnik Holding GmbH, Boelckestraße 25 - 57, D-50171 Kerpen |
| The Effect of Additives for Varying Qualities of Organic Coated Steel Sheet , Jun - 2000, C. S. Park and Y. G. Jung Coating Technology & Electrical Steel Research Team, Pohang Iron & Steel Co., Ltd, KOREA |
| Change of the Crystallinity of Heat-sealed PET Film on Laminated Sheet Steel , Jun - 2000, Yong-Gyun Jung & Chan-Sup Park, Coating Technology & Electrical Steel Research Group, Technical Research Laboratories, Pohang Iron & Steel Co., Ltd., Pohang, Korea |
| INNOVATIVE METHODS FOR THE SURFACE TREATMENT INDUSTRY , Jun - 2000, Franco Marchetti |
| The Internet for Finishers , Jun - 2000, Ira S. Handelsman, Sales Manager, Cornerstone Systems, Inc., Crystal Lake, IL |
| The Design Engineer's Internet Desktop , Jun - 2000, Anthony D. Merenda, I-Mark, Inc., Hartford, CT |
| www.aesf.org-A Work-in-Progress Enhances Member Service & Entertainment , Jun - 2000, Sylvia L. Baxley, AESF International Headquarters, Orlando, FL |
| State of the Net Address: A Surface Finishing Prospective , Jun - 2000, Travis Stirewalt |
| PWB Requirements for Increasing Interconnect Density , Jun - 2000, James P. Langan |
| Immersion Silver Surface Finish: Usage Requirement Test Results & Production Experience , Jun - 2000, George M. Wenger & Robert G. Furrow Lucent Technologies Princeton, NJ / North Andover, MA & Numerous Lucent Technologies Colleagues |
| An Analysis of Lead-free Final Finishes: The First Step in Producing a Lead-free Printed Wiring Board , Jun - 2000, Richard M. Edgar, Florida Cir Tech Inc., Greeley, CO |
| Application, Process Control and Requirements of Electroless Nickel Immersion Gold (ENIG) in PCB, High Density Microelectronics and Wafer , Jun - 2000, Stewart J. Hemsley, Engelhard-CLAL (Singapore) Pte Ltd K.Shiokawa, N.E.Chemcat.Japan |
| Immersion Tin as a High Performance Solderable Finish for Fine Pitch PWBs , Jun - 2000, David H. Ormerod - Enthone division of Polyclad Technologies. |
| The Performance and Attributes of the Immersion Silver Solderability Finish , Jun - 2000, J. Lee Parker, Jr., Ph.D. Viasystems Richmond, VA |
| Electrodialysis in Chromium Plating and in Chromate Treatment , Jun - 2000, Prof. Sergei S Kruglikov, Dr. Elena S. Kruglikova and Dmitri Yu Turaev S.S. Kruglikov Consultants, Moscow, Russia |
| Purification and Recycling Process of Hexavalent Chromium Solutions Using a Low Cost Chemical Method , Jun - 2000, Patrick Benaben and Joseph Popakul, SMS Division. Ecole Nationale Superieure des Mines.F-42023 - Saint-Etienne Cedex 2 (France) |
| Non-line-of-sight Hard Chromium Alternatives Update , Jun - 2000, T. Naguy, Air Force Research Laboratory/MLQE & M. Klingenberg, M. Pavlik & D. Schario, Concurrent Technologies Corporation (CTC), Johnstown, PA |
| A Novel Chromium Plating from Trivalent Chromium Solution , Jun - 2000, Gu Hong, Kok Siong Siow, Gao Zhiqiang, An Kong Hsieh,Department of Chemistry, National University of Singapore, 10 Kent Ridge Crescent, Singapore 119260, Republic of Singapore |
| Thermal Alloying of Tin/Nickel Films as Substitutes for Chromium Plating , Jun - 2000, Hideyuki Kanematsu, Tatsumasa Kobayashi, Dept. MS & E. Suzuka National College of Tech., Suzuka Mie JAPAN Takeo Oki, Professor Emeritus, Nagoya University, Chikusa-ku, Nagoya, Aichi, JAPAN |
| Electrodeposited Alloys as a Alternative for Decorative Hexavalent Chromium , Jun - 2000, George E. Shahin C.E.F., Atotech U.S.A., Rock Hill, South Carolina |
| TROUBLESHOOTING ZINC ELECTROPLATING BATHS IN THE LABORATORY , Jun - 2000, Richard E. Painter |
| Alternatives to Chromate as a Conversion Coating for Electronic Enclosures , Jun - 2000, Bill Trumble, Nortel Networks, Kanata, Ontario, Canada |
| Non-Hexavalent Chrome Passivation Technologies for Zinc and Zinc Alloys , Jun - 2000, Craig V. Bishop John R. Kochilla McGean-Rohco, Inc. |
| The Effect Of Sealers On Increasing The Corrosion Resistance Of Chromate Free Passivates On Zinc And Zinc Alloys , Jun - 2000, Paul Upton |
| Electrochemical Deposition of Sn/Zn Alloys , Jun - 2000, Dr. Jean Rasmussen 1 Jahl-Technology, Inc. & Edward Budman 2 Chemtech Finishing Systems |
| Non-cyanide Alkaline Zn-Fe Alloy Electroplating Bath & Process , Jun - 2000, Zeng Xin & Zhang Liang, Oriental Metal Finishing Technical Corporation, Hangzhou, China |
| Corrosion Behavior of Zinc & Zinc-Cobalt Coatings Electrodeposited from an Acidic Chloride Bath , Jun - 2000, G. Trejo, H. Ruiz, R. Ortega Borges & Y. Meas V., Centrol de Investigación y Desarrollo Tecnológico en Electroquimica (CIDETEQ), Querétaro, Mexico |
| Benign Zinc-plated Coatings , Jun - 2000, John Hadley, CChem MRSC, Enthone-OMI, 'S-Hertogenbusch, The Netherlands |
| Automatic Bath Control Systems For Electroless Nickel Plating , Jun - 2000, Charles M. Johnson and Ronald N. Duncan, Palm Instruments, Inc., LaVergne, TN |
| Five Steps to a Cleaner, Safer, More Efficient Plating Shop , Jun - 2000, Eric Burghardt, 5S Team Leader, Anoplate Corp., Syracuse, NY Milt Stevenson, Jr., President, Anoplate Corp., Syracuse, NY |
| A Study of the Costs & Benefits Associated with ISO 9000 In Selected Wisconsin Companies , Jun - 2000, Robert B. Anderson, CEF, Scot Industries, Muscoda, WI & Dr. Larry Sallee, DBA, CPA, CMA, Winona State University, Rochester, MN |
| ASTM Standard Test Method F1940 Process Control Verification to Prevent Hydrogen Embrittlement-A Demonstration of the Application Guidelines , Jun - 2000, Dr. J. Barton Boodey, RSL Technology Center, Inc., Richboro, PA |
| ISO 14001 Environmental Management Systems (EMS) for the Electroplating Industry , Jun - 2000, Tim Denhof, TTEMI, Inc, Chicago, IL and Mike Kenel, PhD, McNamee Industrial Services, Inc., Ann Arbor, MI |
| Cleaning Techniques for Functional Finishes: From Aluminum to Magnesium & Super-Nickel Alloys , Jun - 2000, Douglas B. Wyatt, United Airlines Maintenance Operations San Francisco International Airport, San Francisco, CA |
| Development of a Single-step Cleaner/Deoxidizer/Activitator , Jun - 2000, Barrie Singer, Infinity Chemicals Group |
| Effective Use of Ultrasonic Cleaning for Pretreatment , Jun - 2000, F. John Fuchs, Director of Applications Technology, CAE Cleaning Technologies |
| Oil Control & Surfactant Preservation in Aqueous Cleaning Processes , Jun - 2000, John P. Scambos, Aqueous Recovery Resources |
| The Dynamics of Switching to Aqueous , Jun - 2000, Michael Endres, Safety-Kleen Corp., Elk Grove Village, IL |
| Chemical Milling Environmental Improvements , Jun - 2000, Tom Foulds, Boeing Manufacturing R&D, Seattle, WA & Jim Wichmann, A.C. Products |
| Automation and Chemical Milling , Jun - 2000, Rick Wire, Manufacturing Research and Development, Boeing, Auburn/WA |
| A WATER BASED MASKANT BECOMES MORE USER FRIENDLY , Jun - 2000, Thomas D. Brown Principal Engineer/ Scientist Boeing Phantom Works, Long Beach Division Long Beach, California Jo Ann Garner Engineer Scientist - Specialist Boeing Information, Space, and Defense Systems Division Huntington Beach, California |
| Plating on Plastics Has a Home in the AESF, Apr - 2000, Paul Frank |
| Hang 'em Up, Hang 'em Right, Hang 'em High, Apr - 2000, Stephen F. Rudy |
| We Can't Please All of the People, All of the Time, Apr - 2000, James H. Lindsay |
| Pulse Plating & Other Myths, Apr - 2000, Fred Mueller |
| Fact or Fact or Fiction? One in a Million, Apr - 2000, Jack W. Dini |
| Creating Functionally Graded Microstructures by Electrodeposition & Diffusion Annealing, Apr - 2000, F. Czerwinski |
| A Review of Electroplating Nickel Bath Life Extension, Nickel Recovery & Copper Recovery from Nickel Baths, Apr - 2000, F. Czerwi Diana Bless nski |
| Training "Colombo"-Part XIII Electroless Nickel Solutions & Processes, Apr - 2000, Frank Altmayer |
| Feasibility of Restricting Lead From Electronic Products, May - 2000, James P. Langan |
| Fact or Fiction? Fact or Fiction? Radiation Hormesis, May - 2000, Jack W. Dini |
| Not All Electric Fields are Created Equal For Emerging Electronic Applications, May - 2000, E. Jennings Taylor |
| Polarization & Hydrogen Overvoltage, May - 2000, James H. Lindsay, |
| PVD Processes: Pulsed DC for Sputtering & Biasing, May - 2000, Donald M. Mattox |
| Studies of Acid Sulfate Copper Pulse Reversal Current Electrodeposition, May - 2000, ShowChin Kou & Aina Hung |
| ElectrodepositionofPlatinum FromanAlkalineElectrolyte, May - 2000, StojanS.Djokic |
| Formation of Ductile Amorphous & Nanocrystalline NiW Alloys by Electrodeposition, May - 2000, T. Yamasaki, R. Tomohira, Y. Ogino, P. Schloßmacher & K. Ehrlich |
| Checklist for Waste Reduction Strategies, May - 2000, no author given |
| Analytical Techniques for Problem Solving, May - 2000, Joseph A. Abys |
| Shop Talk: Practical Information for Finishers: Hull Cell Review, Jun - 2000, James H. Lindsay |
| Titanium Diboride (TiB 2 ) Formation By Electroplating in Molten Salt With Continuous & Pulsed Current, Jun - 2000, G. Ett & E.J. Pessine |
| Troubleshooting Decorative Electroplating Installations-Part 1, Jun - 2000, N.V. Mandich & W. Saas |
| Electrodeposition of Ni/Cu Multilayers, Jun - 2000, N.V. Myung & K. Nobe |
| Pretreatment Feature: Practical Information for Finishers: Effective Use of Ultrasonic Cleaning For Pretreatment, Jun - 2000, F. John Fuchs |
| Shop Talk: Ultrasonics in Cleaning & Electroplating Practical Information for Finishers , Jun - 2000, S.B. Awad |
| John Maliszewski Retires As CEO of Reliable Plating, Jun - 2000, p&sf |
| Color Sorting Aluminum Alloys For Recycling-Part II, Jun - 2000, P.B. Schultz & R.K. Wyss |
| Finishers' Think Tank: Phosphate Coatings: Spearheading Metal Finishing Progress, Part 2, Jun - 2000, Stephen F. Rudy |
| Handson Management: Carbon Treatment & Filtration, Jun - 2000, Fred Mueller, CEF |
| Fact or Fiction? Plating & Green Chemistry Fact or Fiction?, Jun - 2000, Jack W. Dini? |
| Pulse Plating Control: Modulated Current + Electrolyte Additives, Jun - 2000, Steve Koelzer |
| SVC Topics: A Concise History of Vacuum Coating Technology Part 2b: 1940-1975 SVC Topics, Jun - 2000, Donald M. Mattox |
| Shop Talk: Practical Information for Finishers: Controlling Thickness Distribution To Improve Quality-Part I , Jul - 2000, James H. Lindsay |
| Shop Talk: Practical Information for Finishers Basics of Magnetic & Eddy Current Thickness Measurements Shop Talk: Practical Information for Finishers, Jul - 2000, Bob Wells Shop Talk: Practical Information for Finishers |
| Replacement of Chromium Electroplating Using Advanced Material Technologies On Gas Turbine Engine Components, Jul - 2000, Jerry D. Schell & Mark Rechtsteiner |
| Advice & Counsel Advice & Counsel Manufacturing Trouble (Again) , Jul - 2000, Frank Altmayer |
| Pollution Prevention vs. Process Improvement, Jul - 2000, Tony D'Amato |
| Analytical Techniques for Problem Solving: High Temperature Finish For Automotive Connector Applications, Jul - 2000, Joseph A. Abys |
| Pulse Plating: How I Learned to Love Pulse Plating Automation, Jul - 2000, Steve Koelzer |
| Finishers' Think Tank: Rinsing: More is Better ... Less is Better, Jul - 2000, Stephen F. Rudy |
| SVC Topics: A Concise History Of Vacuum Coating Technology Part 2c: 1940-1975, Jul - 2000, Donald M. Mattox |
| Finishing Trends & Technologies: A New Millennium Vision Based on Electric Field Process Control, Jul - 2000, E. Jennings Taylor |
| Standards Report: A Generic Method of Specifying Coatings, Jul - 2000, George A. DiBari |
| Troubleshooting Decorative Electroplating Installations Part 2, Jul - 2000, N.V. Mandich & W. Saas |
| Copper Electrodeposition From Non-Polluting Aqueous Ammonia Baths, Jul - 2000, Magdy A.M. Ibrahim |
| Corrosion Resistance Of Velour Cu/Ni Electroplates, Jul - 2000, L. Valentelis, L. Grinceviciene, D. Bucinskiene & M. Gladkovas |
| A Zero Emission Electrochemical Flow Reactor For Electrodeposition of Multilayer NanoStructures, Jul - 2000, N.V. Myung, M. Schwartz & K. Nobe |
| Equipment for Finishing Milwaukee Plating Takes the Prize For World's Oldest Coil, Jul - 2000, P&SF |
| Shop Talk: Practical Information for Finishers: Pickling & Acid Dipping, Nov - 2000, James H. Lindsay, Jr. |
| Computerizing Lab Control Records & Activities, Nov - 2000, Tom Luteran |
| Advice & Counsel: P2 for Electroless Nickel (continued), Nov - 2000, Frank Altmayer |
| Analytical Techniques for Problem Solving: Analytical Techniques for Problem Solving Optimization of Tin Plating Process For Adhesive Bonding, Nov - 2000, Dr. Joseph A. Abys |
| Pulse Plating: Pulse Plating Back to Basics: The Diffusion Zone, Nov - 2000, Steve Koelzer |
| Finishers' Think Tank: Hard Chrome ... Hard Facts, Nov - 2000, Stephen F. Rudy |
| Finishers' Think Tank en Español Enjuague: Más es mejor ... menos es mejor (Publicado en P&SF, Julio 2000), Nov - 2000, Stephen F. Rudy |
| SVC Topics: PVD: The Beginnings SVC Topics, Nov - 2000, Donald M. Mattox |
| Effect of SO 2 & Air Sparging In Electrowinning of Copper, Nov - 2000, G.R.K. Rao, J.K. Pradhan, K.G. Mishra, P. Venkateswarlu, T. Subbaiah & R.P.Das |
| Process Management to Control Risk Of Hydrogen Embrittlement, Nov - 2000, J.H. Schmidt, R.B. Meade & L. Raymond |
| Chromiumceria Electrocomposite Coatings, Nov - 2000, R. Narayanan & S.K. Seshadri |
| Profitable Pollution Prevention: Concept, Fundamentals & Development, Nov - 2000, H.R. Lou & Y.L. Huang |
| Troubleshooting Zinc Electroplating Baths in the Laboratory, Nov - 2000, Richard Painter |
| Chromium is Prominent on 2000 Auto Designs, Oct - 2000, P&SF |
| Shop Talk: Practical Information for Finishers: Some Guidelines for the Design, Care & Construction of Plating Racks, Oct - 2000, James H. Lindsay, Jr. |
| Adding Color to the Olympic Torch: Anodized Aluminum Provides Vibrant Blue For the Sydney 2000 Olympic Torch, Oct - 2000, P&SF |
| Guest Editorial Rinse Water Economy, Oct - 2000, W. J. McLay |
| Advice & Counsel: P2 For Electroless Nickel, Oct - 2000, Frank Altmayer |
| Pulse Plating: Pulse Coverage & Throw Testing, Oct - 2000, Steve Koelzer |
| Finishers' Think Tank: Bridging the Gap, Oct - 2000, Stephen F. Rudy |
| Finishing Trends & Technologies: Chemically Mediated Metal Finishing Processes & the Founders of Electrochemistry, Oct - 2000, E. Jennings Taylor |
| SVC Topics: Arc Vaporization & Arc Vapor Deposition SVC Topics, Oct - 2000, Donald M. Mattox |
| Electrochemical Measurement Of the Activity of Printable Catalysts Used for Electroless Metallization, Oct - 2000, E.E. Kalu |
| A Practical Guide for Scoring Environmental Aspects for Impact on the Environment, Oct - 2000, Robert L. Iuliucci |
| Velour Electroplates of Copper & Nickel, Oct - 2000, L. Valentelis, O. Grincevichene, S. Jakobson & D. Crotty |
| Study of Corrosion Resistance of NiWB Amorphous Alloy Deposits, Oct - 2000, L. Zhu, Q. Zhong & J. Liu |
| Shop Talk: Practical Information for Finishers: Controlling Thickness Distribution To Improve Quality-Part II, Sep - 2000, James Lindseyk: Information for Finishers |
| Cleaning Techniques for Functional Finishes: From Aluminum to Magnesium & SuperNickel Alloys, Sep - 2000, Douglas B. Wyatt, Jr. |
| Mathematical Modeling of Electrodeposition, Sep - 2000, Ralph E. White & Venkat R. Subramanian |
| Finishing Trends & Technologies: An Increased Role for Intellectual Property In the Metal Finishing Industry, Sep - 2000, E. Jennings Taylor |
| Advice & Counsel The "Attractive" Side of Electroless Plating, Sep - 2000, Frank Altmayer |
| Analytical Techniques for Problem Solving: Ion Chromatography as a Process Control Tool In Semiconductor Leadframe Manufacturing, Sep - 2000, Joseph A. Abys |
| Health & Safety: Shop Safety: Understanding Operational Risks, Sep - 2000, Robert F. Lee |
| Pulse Plating: Nanopulse, Micropulse, Millipulse & Pulse, Sep - 2000, Steve Koelzer |
| Standards Report: Getting Ready for the Next Meeting, Sep - 2000, Dr. George A. DiBari |
| Finishers' Think Tank: Electropolishing: Relatively New ... Interestingly Diverse, Sep - 2000, Stephen F. Rudy |
| SVC Topics: Surface Preparation: Pure & UltraPure Water, Sep - 2000, Donald M. Mattox |
| Catalytic Activity of Sputtered Palladium Films For Electroless Nickel Plating Studied Using a Quartz Crystal Microbalance, Sep - 2000, K. Kobayakawa, M. Morita, K. Miyauchi, Y. Sato & E. Fujimoto |
| Pulse Plating of Hard Chromium From Trivalent Baths, Sep - 2000, Y.B. Song & D.T. Chin |
| Surface Morphology, Appearance & Tribology of Electrodeposited Tin Films, Sep - 2000, C. Xu, Y. Zhang, C. Fan, P. Chiu & J.A. Abys |
| Electroplating of Tin From Acidic Gluconate Baths, Sep - 2000, S.S. Abd El Rehim, S.M. Sayyah & M.M. El Deeb |
| InterMetro de Mexico Opens New Plating Line In Chihuahua, Dec - 2000, Brett S. Drozic, CEF & Tom Rash |
| The Five "P"s of Management, Dec - 2000, James H. Lee |
| EMF Series: A Guide to Troubleshooting, Dec - 2000, Dr. James H. Lindsay, Jr., AESF Fellow, Contributing Technical Editor |
| Back to Basics: Pulse Math, Dec - 2000, Steve Koelzer |
| Change is Good ... Change is Ongoing ... To Chrome or Not to Chrome, Dec - 2000, Stephen F. Rudy, CEF |
| What Does Innovation Have to do With It?, Dec - 2000, Dr. E. Jennings Taylor |
| DC Glow Discharge for Sputtering & Biasing, Dec - 2000, Donald M. Mattox |
| Charge Modulated Electrochemical Deposition of Copper for Electronic Interconnect Applications, Dec - 2000, E.J. Taylor, J.J. Sun & M.E. Inman |
| Troubleshooting Decorative Electroplating Installations—Part 3: Pores, Spotting-out, Pits, Peeling & Blistering, Dec - 2000, N.V. Mandich |
| Pulse Plating Effects In Silver Electrodeposition, Dec - 2000, P.-A. Gay, P. Berçot & J. Pagetti |
| Purification & Recycling Process For Hexavalent Chromium Solutions Using a Low-cost Chemical Method, Dec - 2000, P. Benaben & J. Popakul |
| MP&M Lands with a Thud, Dec - 2000, Ken Lemke, AESF Fellow |
| Improving Functional Powder Coatings' Corrosion Protection, Jan - 2000, Kuruvila Varughese |
| PVD Protects and Beautifies, Jan - 2000, Beverly A. Graves |
| Tapping into a Better Clean, Jan - 2000, Beverly A. Graves |
| Metal Recovery and Wastewater Reduction Using Electrowinning, Jan - 2000, Laura Bloch |
| Automation Sends Productivity Soaring, Feb - 2000, Steven R. Kline, Jr. |
| Zinc Finds New Home at Anoplate, Feb - 2000, Milt Stevenson, Jr. and Milt Stevenson, Sr. |
| Non-Chromated Rinses as Replacements for Chromated Rinses, Feb - 2000, Curtis N. Morehead |
| Aiming for the Perfect Finish, Feb - 2000, Richard Johnson |
| Reducing Rinse Water Use, Feb - 2000, Laura Bloch |
| PING Stays Away from the Rough, Mar - 2000, Beverly A. Graves |
| Choosing the Right VOC Emission Control Technology, Mar - 2000, Mohit Uberoi |
| Color Matching All Aluminum Parts, Mar - 2000, Beverly A. Graves |
| Are You Realizing the True Value of SCRAP? , Mar - 2000, Brad Durkin, Mike Barnstead and Boules Morcos |
| Reducing Dragout with Spray Rinses , Mar - 2000, Laura Bloch |
| NKT Improves Plating with Filtration, Mar - 2000, Ib-René Therkildsen |
| Meeting the Challenges of Contract Electrocoating, April - 2000, Keith Anderson |
| Nickel Chromium Plating in Duncan, Oklahoma, April - 2000, Beverly A. Graves |
| Enhance Your Cleaning Process with Ultrasonics, April - 2000, Jeff Hancock |
| A Mass Finishing Niche, April - 2000, Beverly A. Graves |
| Coating Really Small Parts - A Finisher's Perspective , May - 2000, Jon Shain |
| Hard Chrome Plating on Plastics Tooling: Now More Than Ever, May - 2000, Marshall DeLaPuenta |
| The Total EN Solution, May - 2000, Dan Englebert |
| Improving Process Efficiency , May - 2000, Laura Bloch |
| Painting a Victory, June - 2000, Beverly A. Graves |
| Speeding to the Finish , June - 2000, Steven R. Kline, Jr. |
| Saving Water Plating PCBs, July - 2000, Beverly A. Graves |
| High-Tech "Weaponry" for Painters, July - 2000, Steven R. Kline, Jr. |
| PVD Coatings for Medical Device Applications, July - 2000, Mark Pellman |
| Powder Coating in the Year 2000, July - 2000, Greg Bocchi |
| Powder Coating Materials, July - 2000, Greg Bocchi |
| Powder Application Methods, July - 2000, Greg Bocchi |
| Powder Coating Takes First Place, July - 2000, Jeff Palmer |
| Cutting Costs and Improving Quality, July - 2000, Jeff Palmer |
| Powder Coating Enhances High-Tech Gadgetry, July - 2000, Jeff Palmer |
| Powder Coating Provides Competitive Edge, July - 2000, Jeff Palmer |
| Powder Coating Conveys Success, July - 2000, Jeff Palmer |
| Riding Powder Coating to the Top, July - 2000, Jeff Palmer |
| Wastewater Challenges Simplified , Aug - 2000, Beverly A. Graves |
| Simplifying Aqueous Cleaning, Aug - 2000, Edward O'Neill, Anthony Miremadi, Rigoberto Romo, Alex Guzman, Masha Shub and Barbara Kanegsberg |
| Understanding Your Mass-Finishing Process , Aug - 2000, Eric Hurley |
| Changing Your Painting Process, Sep - 2000, Steven R. Kline, Jr. |
| Decorative Plating at Quaker City, Sep - 2000, Bev Graves |
| Adding Process Control Cuts Etch Time by Half, Oct - 2000, Kurt A. Burton |
| Cost-Cutting Benefits of Chemical Stripping, Oct - 2000, Tim McNeilly |
| Controlling Your Electrocoating Line, Oct - 2000, Steven R. Kline, Jr |
| Analyzing a Waterborne Paint Line , Nov - 2000, Don Cassil |
| Acid Recycling at Plating for Electronics, Nov - 2000, Sean Delaney, David Hill, and Daniel Bailey |
| Making Pollution Prevention Work, Nov - 2000, Dr. Alex Ross |
| Electropolishing: A Chemical Alternative, Nov - 2000, Beverly A. Graves |
| Consolidating Electronics Plating Lines , Nov - 2000, Beverly A. Graves |
| Profiting from Control—The (Up)Right Way , Dec - 2000, Steven R. Kline, Jr. |
| Black Oxide Boosts Business, Dec - 2000, Beverly A. Graves |
| Increasing Productivity with New Barrel Line, Dec - 2000, Beverly A. Graves |
| Powder Coating—Simpler and Smarter, Dec - 2000, Tom Matthey |
| Metal Finishers Guide to Reducing Energy Costs, Nov - 2000, |
| Chemical Processing of Nanostructured Coatings, - 2000, Kurihara, Lynn K |
| Use of Sorbent Materials for Treating Hazardous Wastes, - 2000, Ronald Patun |
| Evaluation of Aluminum-Manganese as a Cadmium Replacement, - 2000, Kane, Michael and Matzdorf, Craig and Green, James |
| Use of Sorbent Materials for Treating Hazardous Wastes, - 2000, Ronald Patun |
| Black Layers with Cathodic Corrosion Protection , - 2000, Rolf Jansen, Sigrid Volk and Patricia Preikschat |
| New Concepts in Non Cyanide Alkaline Zinc Plating , - 2000, Rolf Jansen |
| Hexavalent Chromium Processes, - 2000, Bettina Kerle and Mathias Opper and Sigrid Volk |
| Electrochemical Basics of Electroplating , - 2000, Rolf Jansen |
| Controlling hazards in the electroplating industry , - 2000, |
| Toxics Release Inventory (TRI) Reporting of Nitrates for Metal Finishers - The Quick and Dirty Guide, - 2000, Woosley, Julie |
| Titatnium Anodizing, - 2000, Metalast |
| Information on the Misuse of Sodium Dimethyldithiocarbamate, - 2000, Michael B. Cook, Director Office of Wastewater Management |
| Titanium Anodizing, - 2000, METALAST |
| The 41st William Blum Lecture, Mathematical Modeling of Electrodeposition, - 2000, Dr. Ralph E. White |
| Epidemiologic Study Of Chromate Production Workers: A Summary, April - 1999, Dr. Herman J. Gibb |
| Excerpts of Topics Discussed At the Wastewater Treatment Forum, April - 1999, |
| Hands-On Management: Before We Can Follow the Road, We Have to Help Build It, April - 1999, Fred Mueller |
| Advice and Council:, April - 1999, Frank Almayer |
| Pulse Plating: Tackling Current Distribution, April - 1999, Steve Koelzer |
| Finishers' Think Tank: Aluminum: The Lightweight Industry Heavyweight, April - 1999, Stephen F. Rudy |
| Fact or Fiction: Radiation, April - 1999, Jack W. Dini |
| SVC Topics: PVD Processes: Ophthalmic Coatings, April - 1999, Donald M. Mattox |
| Nickel Electroplating On Steel From Acidic Citrate Baths, April - 1999, M.A.M. Ibrahim, S.S. Abd El Rehim, S. M. Abd El Wahaab, M.M. Dankeria |
| Balancing Quality and Compliance, Nov - 1999, Beverly A. Graves |
| Aqueous Cleaning Hits a Home Run, Nov - 1999, Steven R. Kline, Jr. |
| Fasteners and Finishes, Nov - 1999, Thomas S. Doppke |
| The Next U.S. Workforce, Nov - 1999, Bev Graves |
| Electroplating/Electroless Plating for Electronic Applications, Dec - 1999, Don Baudrand |
| Anticipating the Future of Electronics Plating, Dec - 1999, Beverly A. Graves |
| Total Control Anodizing, Dec - 1999, Beverly A. Graves |
| Powder Coating Simplified, Dec - 1999, Beverly A. Graves |
| Chrome-Free Pretreatment Rinse, Dec - 1999, David Crosley |
| Guaranteeing Color: The Digital Way, Dec - 1999, Brian Levey |
| Thank You for the Fun, Dec - 1999, Bev Graves |
| Nothing but Net: The Customer Experience, Dec - 1999, Travis Stirewalt |
| Review of Chrome Plater Emission Test Methods, Jan - 1999, Peter Grohse, Research Triangle Institute; Gene Riley, USEPA |
| A Risk Assessment Tool for the Metal Finishing Industry, Feb - 1999, Matthew Lorber & Paul Shapiro |
| Fugitive Emission Reduction and Measurement Above a Hard Chromium Plating Tank, Feb - 1999, Mark E. Fraser, Thomai Panagiotou, and Amy J.R. Hunter |
| Energy Conservation & Process Control Utilizing Covered Tanks, Feb - 1999, Kenneth C. Hanldnson, Tom Brady & Adam Chmielewsla |
| Ratio of Hexavalent To Total Chromium In Stack Testing-- A Gauge Of Control Efficiency?, Feb - 1999, Thomas E Miles |
| In-Process recycling of a Spent Electroless Nickel Plating Bath, Feb - 1999, R.P. Renz. TM. Schumaker, .ZD Chromick, B.D. Grant, E.T. Taylor, P.O. Miller, and C.D. Zhou, J.J. Sun |
| Controlled Atmosphere Separation Technology Recovery of Wastewater and Process Chemistries in Metal Finishing and Electronics Applications, Feb - 1999, Steven Brown |
| Unique Membrane Technology for Removal/Recovery of Metals from Wastewaters & Process Streams, Feb - 1999, W.S. Winston Ho, Tarun K. poddar, Rajko Pusic, & Justin Roller |
| Reducing Operating Costs and Waste Using Electrodialysis to Regenerate Electroless Nickel Baths, Feb - 1999, Mark Williams and Douglas Vogel |
| New 3-D Electrolytic Cell Overcomes PPM Barrier for Metal Effluent Discharges, Feb - 1999, B. George Kniazewycz & Paul De Baldo |
| Assessing Chemical Risk in the Absence of Data: Pollution Prevention Assessment Framework, Feb - 1999, Ihab H. Farag and Rudolph A. Cartier Jr |
| Beyond Environmental Compliance with Pollution Prevention: CLEAN-P2, Feb - 1999, Dwight Peavey and William T. |
| Approaching Zero Discharge Technology Demonstration Report, Feb - 1999, A. Gus Eskamani |
| Environmental Technology Verification Program for Metal Finishing, Feb - 1999, Jim Voytko and Alva Edwards Daniels |
| Waste Minimization in Cadmium & Zinc Plating Using a Zero Waste PVD Method, Feb - 1999, Mandar Sunthankar |
| Chromium Alternatives Update, Feb - 1999, M. Klingenberg, B. Manty, D Schario |
| HVOF Thermal Spray Coatings as an Alternative To Hard Chrome Plating on Military and Commercial Aircraft, Feb - 1999, Bruce D. Sartwell and Bruce Bodger |
| Industrial Cleaning Y2K and Beyond The Future Following the Montreal Protocol, Feb - 1999, Richard Reynolds |
| An Alternate Wear Treatment to Replace Chrome Plating, Feb - 1999, William L. Kovacs |
| Made from Scratch: The Design, Installation & Operation Of a New Waste Treatment System, Feb - 1999, Britt E. Allgood |
| Application of Polymer Filtration to Metal Finishing Industrial Process Streams, Feb - 1999, Julia A. Thompson |
| Demonstration of Russian Electroflotation Technology at Raytheon Missile Systems Company Tucson, Arizona, Feb - 1999, Paul Fecsik |
| Hydrazine Hydrate as the Reducing Agent in the Treatment of Wastewater Containing Chromic Acid, Feb - 1999, Gus Griffin |
| The Use of Polymer Technology to Replace Inorganic Coagulants, Feb - 1999, Mark E. Andrus |
| Update on HADCO's Project XL "Streamlined" Delisting of F006 Sludge from PWB Manufacturing, Feb - 1999, Lee R. Wilmot |
| Update On Chromium and Nickel Regulations In California, Feb - 1999, M. Dean High |
| Case Study: Eaton/Cutler-Hammer's New Plating & Wastewater Treatment System Plant at Arecibo, Puerto Rico, Feb - 1999, Steve Schachameyer & Anton Antonov & Ken Lineman |
| ISO 14001-A Strategic Opportunity, Feb - 1999, Roger S. Gibb |
| A Conceptual Framework for Performance-based Incentives Under the Strategic Goals Program in Chicago, Feb - 1999, Richard C. Sustich, Cecil Lue-Hing, Richard Lanyon. Louis Kollias |
| EMS User Groups: A Cost Effective Approach to Implementing an Environmental Management System Extended Abstract, Feb - 1999, Janerte Lutz |
| Development of a Life Cycle Assessment Screening Model, Feb - 1999, Wawze E. Bates, James O'Shaughnessy, Sharon A. Johnson |
| Life Cycle Assessment & Electroplating, Feb - 1999, Allan Herrstedt Jensen |
| Implementing ISO 14001 in a QS-9000 (ISO 9002) Certified Surface Finishing Facility: Kuntz Electroplating lnc.'s Experience, Feb - 1999, Brigitte Lebel |
| Controlling Dragout Loss from Process Baths Using Conductivity Measurements, Feb - 1999, Leif Magnuson, Patrick Wooliever and Peter Ko |
| Using Material Flow & Waste Generation Metrics To Identify Process Efficiency, Feb - 1999, Leif Magnuson, Michael Keefe & Peter Ko |
| State-of-the-Art Closed-loop Systems in Europe, Feb - 1999, Andreas Moebius |
| Chemical Choices For Zero Discharge Systems, Feb - 1999, Stephen Pertone |
| Closing the Loop in a Small Plating Shop, Feb - 1999, Bill Vins |
| Design of a Wastewater Reuse Network for Electroplating Processes, Feb - 1999, H.R. Lou, KH. Yang & Y.L. Huang |
| Case Study: Zero Sewer Discharge for a Hard Chrome Plating Facility, Feb - 1999, Sam Mason |
| In-Process Recycling of a Hexavalent Chromium Plating Bath, Feb - 1999, R.P. Renz , TM. Schumaker |
| Treatment of Hexavalent Chromium in Groundwater Using Ion Exchange: Development of Remedial Technology, Feb - 1999, Paula J. Hansen and Mark L. Gage |
| Hexavalent Chrome Recovery from Wastewater, Feb - 1999, Timothy M. Werner |
| Zero Air Discharge for Automatic Plating Lines: The Next Generation of Emission Control, Feb - 1999, Paul Newsad |
| A Case Study in a PWB Manufacturing Company: Copper Recovery by Electrochemical and Ion Exchange Technologies, Feb - 1999, Shih-Min Lin, Hann-Ming Yang and Sen-Yuan Huang |
| A STUDY OF ELECTROWINNING APPLICATIONS & ECONOMIC EVALUATION IN METAL FINISHING & CIRCUIT BOARD MANUFACTURING, Feb - 1999, JUZER JANGBARWALA |
| Constructing & Using a Database for Environmental Reporting, Feb - 1999, John Sharp |
| Next Generation EMSs: Utilizing Software to Streamline Data Management, Feb - 1999, Gabriele Crognale |
| Water Impurities & Their Effect on Surface Finishing Operations, Feb - 1999, Jeffrey Lord and Peter Gallerani |
| Water Purification & Recovery Technologies A Critical Review, Feb - 1999, Dr. Fred Reinhard |
| Rinse Water Quality Standards for Surface Finishing Operations, Feb - 1999, Peter A. Gallerani |
| Make It a New Year's Resolution:
Be a Better Communicator, Jan - 1999, Robert T. Groom |
| Mass Laminate Manufacturer Builds Bridge to Zero Discharge, Jan - 1999, PSF Staff |
| The Design for the Environment Printed Wiring Board Project: A Partnership to Identify Cleaner Technologies, Jan - 1999, Kathy Hart, Dipti Singh, Holly Evans, Lori Kincaid, Jack Geibig & Mary Swanson |
| Advice & Counsel, Jan - 1999, Frank Altmayer |
| Circuit Technology: Millennium Predictions for Printed Circuits, Jan - 1999, James P. Langan |
| Finisher's Think Tank :Soak Cleaning ... The Right Stuff, Jan - 1999, Stephen F. Rudy |
| PVD Processes: Polymers As Substrate Materials, Jan - 1999, Donald M. Mattox |
| Mass Transfer Conditions in an Electrochemical Cell In the Presence of Turbulence Promoters, Jan - 1999, T. Subbaiah, P. Venkateswarlu, S.C. Das, R.P. Das & G.J.V.J. Raju |
| Electrodeposition & Characterization of a Corrosion Resistant Zinc-Nickel-Phosphorus Alloy, Jan - 1999, A. Krishniyer, M. Ramasubramanian, B.N. Popov & R.E. White |
| Zinc Anodizing & Coloring by Chemical Conversion & Spark Discharges, Jan - 1999, H.C. Shih, F.Y. Shyr, J.W. Hsu, S.C. Chung & S.L. Sung |
| The Electrodeposition & Material Properties Of Palladium
Cobalt, Jan - 1999, J.A. Abys, G.F. Breck, H.K. Straschil, I. Boguslavsky & G. Holmbom |
| The Outlook is Good for Finishers in '99, Feb - 1999, Robert T. Groom |
| Metal Surfaces Equips Itself for Bold Future, Feb - 1999, PSF Staff |
| Precision Cleaning Prior to Plating and Coating Applications, Feb - 1999, Brian T. Nevill |
| Advice and Council:
Taking a Powder, Feb - 1999, Frank Altmayer |
| Finisher's Think Tank
Electrocleaning ... The Right Choice, Feb - 1999, Stephen F. Rudy |
| Hands-on Management: Maintaining Laboratory Controls, Feb - 1999, Fred Mueller |
| Fact or Fiction:
Indoor Air Pollution, Feb - 1999, Jack W. Dini |
| Plain Language Regulatory Guide Expanded, Feb - 1999, George Cushnie & William D. "Bill" Bonivert |
| PVD Processes: Crystalline Structure By Diffraction Techniques, Feb - 1999, Donald M. Mattox |
| Effect of Heat-Treatment
On Magnetic Properties of Electroless Ni-B Films, Feb - 1999, T. Saito, E. Sato, M. Matsuoka & C. Iwakura |
| The Influence of Kinetic & Hydrodynamical Factors On the Structure & Properties of Conversion Coatings, Feb - 1999, M. Aroyo & N. Tzonev |
| Direct Metallization Using Ni-Co Alloy On Surface Modified Polyimide Film, Feb - 1999, M. Seita, M. Kusaka, H. Nawafune & S. Mizumoto |
| Silver Reduction from Low-Cyanide-Concentration Solutions: Special Features from an EQCM, Feb - 1999, H. Sanchez & Y. Meas |
| Helpful Advice for Finishing Companies: Use the SFMRB Reports
To Meet ISO Certification Requirements, Mar - 1999, Robert T. Groom |
| The Teamwork Of Jet Engine Cleaning & Fluorescent Penetrant Inspection (FPI), Mar - 1999, Jeff Stevens |
| Expanding Plating & Chemical Processing Capabilities, Mar - 1999, PSF Staff |
| Kaynar Keeps It All Under One Roof, Mar - 1999, PSF Staff |
| Advice & Counsel, Mar - 1999, Frank Altmayer |
| Finishers' Think Tank
Selecting the Right Acid Treatment, Mar - 1999, Stephen F. Rudy |
| Pulse Plating
How & When Pulse Plating Works, Mar - 1999, Steve Koelzer |
| Fact or Fiction?
Cost of a Life, Mar - 1999, Jack W. Dini |
| SVC Topics
PVD Processes:Alloys, Compounds & Dispersions, Mar - 1999, Donald M. Mattox |
| Innovative Technology for Heavy Metal Ions Removal, Mar - 1999, S. Tamarkin |
| A New Approach for the Manufacture Of Miniaturized Pattern-Coils, Mar - 1999, T. Daenen, W. Messing, M.v.d. Hout, E.J. v. Loenen & B.v.d. Bossche |
| Electrodeposition & Characterization Of Co-W Alloys, Mar - 1999, By B.N. Maruthi, L. Ramesh, S.M. Mayanna & D. Landolt |
| A Quartz Crystal Microgravimetric Study Of Copper Corrosion in Alkaline Carbonate Solutions, Mar - 1999, D.A. Dudek & P.S. Fedkiw |
| An Analytical Equation to Compute the Composition of Pulse-Plated Binary Alloys, April - 1999, S. Roy |
| Optimal Design of a Water Reuse System In an Electroplating Plant, April - 1999, Y.H. Yang, H.R. Lou, Y.L. Huang |
| Nickel Diffusion Coating on Austenitic Stainless Steels & Its Effect on Stress Corrosion Cracking, April - 1999, B. Ogel, I.A. Sapci |
| Versatile Jobshop Blends High-quality Service with Southern Hospitality, May - 1999, |
| Advice and Council: Training "Colombo," Part III--Soil Removal, May - 1999, Frank Almayer |
| Pulse Plating: Pulsed Electroforming, May - 1999, Steve Koelzer |
| Finishers' Think Tank: More on Aluminum ..., May - 1999, Stephen F. Rudy |
| Fact or Fiction: Hormesis: A Little Bit Is Good--Too Much Is Bad, May - 1999, Jack W. Dini |
| Surface Finish Optimization in Pulse Reverse Current Electroforming, May - 1999, K.P. Wong, K.C. Chan, T.M. Yue |
| Mechanism of Additivies in Electroplating of Sn-Zn Alloy, May - 1999, M. An, Y. Zhang, J. Zhang, Z. Yang, Z. Tu |
| Simultaneous Analysis of Free Cyanide, Phosphate, Silver Cyanice & Buffer Salts in Silver Plating Solution By Capillary Ion Analyzer, May - 1999, K. Hwang, S.A. Choi, C. Cho |
| Mechanism of Nickel-Phosphorus-Aluminum Oxide Composite Coatings by Electroless Process, May - 1999, Z.A. Hamid, R.A. El-Adly |
| F006: Compositional Characterization
A Generation After Listing, May - 1999, By John S. Lindstedt |
| Chicago Finisher's Success Formula: Environmental Savvy & Smart Process Innovations, Jul - 1999, |
| Hands-On Management: Mechanical Plating, Jul - 1999, Fred Mueller |
| Advice and Council: Training "Colombo" Part V ‐ "Current Events", Jul - 1999, Frank Altmayer |
| Fact or Fiction: DDT, Part 1, Jul - 1999, Jack W. Dini |
| Pulse Plating: Pulse Electronics, Jul - 1999, Steve Koelzer |
| SVC Topics: Application of Vacuum Coating Technology, Jul - 1999, Donald M. Mattox |
| Electroless Deposition of Palladium Using Hypophosphite as a Reducing Agent, Jun - 1999, S.S. Djokic |
| Mechanism of Zinc Electrodeposition in a Chloride Solution, Jun - 1999, Jeong-Real Park, Hyun-Tae Kim |
| Iron-42 wt pct Nickel Lead Frame with Palladium-Electroplated Multi-layer for Semiconductor Packages, Jun - 1999, J.D. Kim, Y.H. Baek, W.S. Choi, K.S. Bok |
| Management Style--As Important as Technology For Ensuring Top Performance in Shops, Jun - 1999, Lee Benson, Rick Watts |
| Advice and Council: Training "Colombo," Part IV--Stress, Hydrogen Effects in Metal Finishing, Jun - 1999, Frank Altmayer |
| Pulse Plating: Pulsed Electroforming, Jun - 1999, Steve Koelzer |
| Hands-on Management: Let's Get Organized, Jun - 1999, Fred Mueller |
| Finishers' Think Tank: Filtration of Cleaners, Jun - 1999, Stephen F. Rudy |
| SVC Topics: PVD Processes: Plasma-enhanced Chemical Vapor Deposition (PECVD), Jun - 1999, Donald M. Mattox |
| Pretreatment of Metals
Prior to Powder Coating
& Troubleshooting of Powder Coating, Aug - 1999, Charles Grubbs, David Montgomery |
| Advice and Council: Training "Colombo" ‐ Part VI, Aug - 1999, Frank Altmayer |
| Fact or Fiction? DDT, Part 2
Persistence in the Environment, Aug - 1999, Jack W. Dini |
| Finishers' Think Tank, Aug - 1999, Stephen F. Rudy |
| Pulse Plating: Read Between the Pulses, Aug - 1999, Steve Koelzer |
| Hands-on Management: Quality Control for Aluminum Dyes, Aug - 1999, Fred Mueller |
| SVC Topics: PVD Processes:
Solar Control & Low-E Window Coatings, Aug - 1999, Donald M. Mattox |
| A Comparative Study of Halogen & Methanesulfonic Acid
Electrotinning Processes, Aug - 1999, Yung-Herng Yau |
| Electrolytic Codeposition
Of Submicron Silicon Carbide with Nickel, Aug - 1999, C. Dedeloudis, M.K. Kaisheva, N. Muleshkov, T. Muleshkov, P. Nowak, J. Fransaer & J.P. Celis |
| Development of a Low-temperature Methylene
Chloride-free Paint Stripper Safe for Aluminum Surfaces, Aug - 1999, Patricia Pulido |
| Electrocoating,
Powder Coating
&Heavy Duty Bumpers—
A Case History, Aug - 1999, Lyle E. Gilbert |
| Metal Recovery Systems:
Development & Use of Cost Estimation Equations, Sep - 1999, J. Schumann & S.K. Ong |
| SVC Topics: PVD Processes: Gas Evaporation & Nanoparticles, Sep - 1999, Donald M. Mattox |
| Fact or Fiction? Single Molecules, Sep - 1999, Jack Dini |
| Hands-on Management: "Psychic Income" from a Job Well Done, Sep - 1999, Fred Mueller |
| Finishers' Think Tank: Stripping Organic Coatings, Sep - 1999, Stephen F. Rudy |
| Extending the Life of Electroless Nickel Solutions, Sep - 1999, R. K. Mayes |
| Pulse Plating: Heartbeat of America, Sep - 1999, Steve Koelzer |
| Circuit Technology: New Approach to PWB Construction, Sep - 1999, James P. Langan |
| EPA Proposes Changes to Pretreatment Program, Sep - 1999, PSF Staff |
| Advice and Council: Training "Colombo"—Part VII, Sep - 1999, Frank Altmayer |
| The 40th
William Blum
Lecture: Faraday's
Children
(and Nickel), Sep - 1999, Dr. George A. DiBari |
| PLATING:
Live Long & Prosper, Sep - 1999, John G. Donaldson &
Prof. Dr. Christoph J. Raub |
| Troubleshooting EN Plating Solutions, Sep - 1999, Michael Aleksinas |
| Electrodialysis System
Extends EN Bath Life for Phoenix Jobshop, Sep - 1999, PSF Staff |
| Testing of Tin Plating
By Use of a Rotating-cone Electrode, Sep - 1999, D. Reichenbach |
| Single-bath Electrodeposition of Chromium-Nickel
Compositionally Modulated Multilayers (CMM)
From a Trivalent Chromium Bath, Sep - 1999, A. Rousseau & P. Benaben |
| Readers Speak: The Last Word on DDT, Oct - 1999, Jack Dini |
| Finishers' Think Tank: Keep It Clean ... Keep It Right ... Keep It Moving, Oct - 1999, Stephen F. Rudy |
| SVC Topics: PVD Processes:
Reactive Plasma Cleaning of Vacuum Systems, Oct - 1999, Donald M. Mattox |
| Hands-on Management: Progressive POP (Plating on Plastics), Oct - 1999, Fred Mueller |
| Fact or Fiction: Folklore or Fact?, Oct - 1999, Jack Dini |
| Advice and Council: Training "Colombo"
‐ Part VIII
Problems With the Brass, Oct - 1999, Frank Altmayer |
| Perspective for Replacement
Of Hard Chromium by PVD, Oct - 1999, J.A. Kubinski, CEF, T. Hurkmans, T. Trinh, Dr. W. Fleischer & Dr. G.J. van der Kolk |
| Shop Talk: Lacquer, Oct - 1999, L.P. Trinity |
| Jobshop Specializes in Chromium Finishes for the Automotive Market, Oct - 1999, PSF Staff |
| Continuous
Plating
Engineered
by Precision
For the
Automotive
& General
Electronics
Industries, Oct - 1999, PSF Staff |
| Tin-Lead Plating, Nov - 1999, Michael Carano |
| Tin Plating, Nov - 1999, Michael Carano |
| Silver Plating, Nov - 1999, Alan Blair |
| Rhodium Plating, Nov - 1999, Dr. Ronald J. Morrissey |
| Powder Coating: The Dry Paint, Nov - 1999, J. David Adams |
| Organic Finishing & Pretreatment, Nov - 1999, James E. Voytko |
| Nickel Plating, Nov - 1999, Dr. George A. DiBari |
| Gold Plating, Nov - 1999, Alan Blair |
| Palladium Plating, Nov - 1999, Dr. Joseph A. Abys |
| Electroless Processes, Nov - 1999, Donald Baudrand |
| Cyanide Copper Plating, Nov - 1999, Jack Horner |
| Cadmium Plating, Nov - 1999, William H. Safranek |
| Brass Plating
Arthur J. Kowalski, Nov - 1999, Arthur J. Kowalski |
| Anodizing, Nov - 1999, David C. Montgomery |
| Acid Sulfate & Pyrophosphate Copper Plating, Nov - 1999, Allen C. Hamilton Jr. |
| Kinetics of Electroless Ni-P-B Alloy Deposition, Dec - 1999, S.S. Abd El-Rehim, N.N. El-Ibiari, M Shaffei & S. Abdel Halem |
| Throwing Power & Cathode Efficiencies of Gold
Electroplating Solutions Under Pulse Regimes, Dec - 1999, D.L. Rehrig & N.V. Mandich |
| Annealing Temperature Dependence of A-C Magnetic
Losses and Microhardness in Fe-TM-B (TM = Fe, Mo, W,
Mo-W) Alloys Obtained by Electroless Plating, Dec - 1999, L.L. Wang, L.H. Zhao, B.W. Zhang., S.Z. Liao, Y.F. Ouyang, W.Y. Hu, X.L. Shu, X.J. Yuan |
| Chicago Trophy Company is Cast in a Winning Role, Dec - 1999, PSF Staff |
| Study of Stress Reducers in Nickel-Tungsten
Electroforming Baths, Dec - 1999, C.-H. Huang, W.Y. She & H.M. Wu |
| Fact or Fiction: Scientists vs. Journalists, Dec - 1999, Jack W. Dini |
| SVC Topics: PVD Processes:
In-line Processing Systems, Dec - 1999, Donald M. Mattox |
| Hands-on Management: Decorative Coatings
& the Ever-changing World of Surface Finishing, Dec - 1999, Fred Mueller |
| Pulse Plating: Sample Wave Analysis, Dec - 1999, Steve Koelzer |
| Advice and Council: Training "Colombo" ‐ Part IX
Acid Copper, Dec - 1999, Frank Altmayer |
| Government Relations Team Comments
On Pretreatment Program Streamlining, Dec - 1999, William A. Collins |
| Historic Red Neon & Porcelain Sign
Restored for Dallas' 2000 Celebration, Dec - 1999, PSF Staff |
| Racking Up a Success Story, Jan - 1999, PF editor |
| New Generation Connector Finish, Jan - 1999, Joe Abys |
| Squeezing Money from Your Waste, Jan - 1999, Mark Christensen |
| Assuring Paint Color at Behr, Jan - 1999, PF editor |
| Dispersion Coatings with PTFE, Feb - 1999, Karl-Heinz Pietsch |
| Cleanliness and Quality vs. Cost: A Trade-Off, Feb - 1999, John Scambos |
| Mile High Meets the Challenge, Feb - 1999, PF editor |
| Adding Energy to the Bottom Line, Feb - 1999, PF editor |
| Long-Term Performance of Cadmium Alternatives, Feb - 1999, George Shaw |
| Fasteners and Finishes, Feb - 1999, Thomas S. Doppke |
| Why Double Electrocoat and Powder Coat?, Mar - 1999, Timothy L. Hager |
| Corrosion Potential of Zinc Alloys, Mar - 1999, Nabil Zaki |
| Anodizing Process Eliminates Human Error, Mar - 1999, Beverly A. Graves |
| Riding the Plastisol Carousel, Mar - 1999, Steven R. Kline, Jr. |
| The Little Plating Shop that Could, Mar - 1999, Beverly A. Graves |
| High-Production Plating Line, Apr - 1999, Beverly A. Graves |
| Destroying Your VOCs, Apr - 1999, Steven R. Kline, Jr. |
| Hardware for Plating Hand-Tools, Apr - 1999, Beverly A. Graves |
| Plant Management for the Year 2000 and Beyond, Apr - 1999, Steven R. Kline |
| Keeping Engines Shipshape, Apr - 1999, Beverly A. Graves |
| Fasteners and Finishes, Apr - 1999, Thomas S. Doppke |
| How Clean Is Clean?, May - 1999, Bob McElroy |
| Plating Plastics at Guardian Automotive Trim, May - 1999, Beverly A. Graves |
| Citric Acid Passivation of Stainless Steel, May - 1999, Lee V. Kremer |
| Preparing for the Millennium, May - 1999, Beverly A. Graves |
| Fasteners and Finishes, May - 1999, Thomas S. Doppke |
| Vacuum Deposition Processes, Jun - 1999, Donald M. Mattox |
| Liquid CO2 Immersion Cleaning, Jun - 1999, David Jackson and Barry Carver |
| Reducing Paint Use While Increasing Production, Jul - 1999, Steven R. Kline, Jr. |
| High-Energy Mass Finishing, Jul - 1999, Dan Regan |
| Recycling Aqueous Cleaning Solutions, Jul - 1999, N. Rajagopalan , T. Lindsey, and John Sparks |
| Total Integration is Key to Quality Control, Jul - 1999, Beverly A. Graves |
| Adhesion of Electroless Nickel Deposits to Aluminum Alloys, Jul - 1999, Don Baudrand |
| Fasteners and Finishes, Jul - 1999, Thomas S. Doppke |
| Powder Coating Line Expansion, Aug - 1999, Steven R. Kline, Jr. |
| You Used One This Morning, Didn't You?, Aug - 1999, Beverly A. Graves |
| Upgrading VOC Control, Aug - 1999, Beverly A. Graves |
| Compliance in a Small Plating Shop, Aug - 1999, Beverly A. Graves |
| Fasteners and Finishes, Aug - 1999, Thomas S. Doppke |
| So, You Want to Try Abrasive Blasting, Sep - 1999, Jim Klomparens |
| Pretreatment System Helps Meet New Standards, Sep - 1999, Beverly A. Graves |
| Breaking Through The Faraday Cage, Sep - 1999, Steven R. Kline, Jr. |
| Extending Finishing Bath Life, Sep - 1999, Beverly A. Graves |
| Fasteners and Finishes, Sep - 1999, Thomas S. Doppke |
| Stripping Powder Coatings, Oct - 1999, Pat Pulido |
| Sizing Heating and Cooling Coils, Oct - 1999, Richard Leopold |
| Electropolishing for the Future, Oct - 1999, Beverly A. Graves |
| Improving Process Control, Oct - 1999, Wayne V. Hale and Jeff Hart |
| Fasteners and Finishes, Oct - 1999, Thomas S. Doppke |
| Consult a Finisher First, Oct - 1999, Bev Graves |
| Streamlining Assembly at Bimba Manufacturing, Nov - 1999, Beverly A. Graves |
| Waterborne Paint Handles Demanding Conditions, Nov - 1999, Beverly A. Graves |
| Some Buffing and Polishing Basics, Nov - 1999, Beverly A. Graves |
| New Finishing System Gives Southworth a Lift, Nov - 1999, Beverly A. Graves |
| Multiple-step Alternatives to Chromate Passivation, Mar - 1999, Craig V. Bishop, Dr. Gary Loar |
| Chrome-Free Pretreatment Process for Aluminum, Mar - 1999, Andrew J Day and S C Whyle and Dr Wim J van Ooij |
| The Latest Developments in Hard Chrome Replacement Using Coatings Applied by HVOF, Mar - 1999, J.D. Nuse, David A. Somerville & James M. Emery |
| Management Style Holds Equal Importance with Technology to Insure Maximum Shop Performance, Mar - 1999, Lee Benson & Rick Watts |
| Electrodeposition of Thin Films of Zn-Ni-X (X = SiO2, P, Ce, Mo) Ternary Alloys onto Chemically Modified Steel Alloys to Prevent Corrosion & Hydrogen Embrittlement, Mar - 1999, Branko N. Popov. A. Durairajan, A. Krishniyer, B.S. Haran & Ralph E. White |
| Recent Chromium Alternatives Activities, Mar - 1999, M. Klingenberg, B. Manty & D. Schario |
| Passivation: Getting the Properties You Want & Need, Mar - 1999, Dan Englebert |
| Overview Briefing: The "New" Joint Group on Pollution Prevention. Integrating & Solving Common Acquisition & Sustainment Needs, Mar - 1999, Robert Hill |
| Perspective for Replacement of Hard Chrome by PVD, Mar - 1999, J. Kubinski, T. Hurkmans, T. Trinh, W. Fleischer & G.J. van der Kolk, Hauzer |
| A New Aluminum Replacement for Cadmium, Mar - 1999, Bryan Fuhr |
| Qualification of HVOF Thermal Spray Coatings as Replacement for Hard Chrome Plating on Aircraft Landing Gear, Mar - 1999, Bruce D. Sartwell |
| Zero-waste Cadmium Plating for the Aerospace Industry, Mar - 1999, Mandar Sunthankar |
| An On-site Process to Repair IVD Aluminum Coatings, Mar - 1999, Christopher J. Helwig |
| Comparison of Wear Rates for Chrome Plating & Six Tungsten Carbide Coatings Tested Against Aircraft Bearing Materials & Coatings, Mar - 1999, H.F. Taber, J.R. Shadley, E.F. Rybicki, I. Megat, W.A. Emery, J.D. Nuse, D.A. Somerville, T.L. Kruecke |
| Practical Aspects of Aqueous Cleaning at United Airlines: A Four-year Perspective, Mar - 1999, Douglas B. Wyatt |
| Can a Plating Shop Operate without Vapor Degreasers Even for Wax Coatings?, Mar - 1999, Carol Eden |
| An Industrial Process with Practically No Free Hydrogen or Oxygen (For Hard-coating & Architectural Anodizing of Aluminum), Mar - 1999, W. Corcoran, R. Huebsch R. Reinhardt, L. Lerner, Dr. M. Lerner |
| Modular Racking for Automated Electroplating Lines: A Five-year Retrospective, Mar - 1999, Bradley C. Johnson |
| Aircraft Depainting: Advances in Surface Preparation Through Pressure Blast, Mar - 1999, Raymond Williams |
| Environmental Technology Verification Program Update, Mar - 1999, Alva Edwards Daniels, James E. Voytko, CEF, Donn Brown, P.E. |
| Conductivity Improvement of Anodic Coatings by Ag Process, Mar - 1999, Shi Hua Zhang & Lin Zhang |
| Influence of Aerosol Characteristics on Nickel-Boron Alloy Plating Using the Dynamic Chemical Plating Process, Jun - 1999, A. Fares Karam & Dr. G. Stremsdoerfer |
| Influence of Phosphorous Content on the Properties of Electroless Nickel Composite Coatings, Jun - 1999, Dr. I. Apachitei & J. Duszczyk |
| Extending the Life of Electroless Nickel Solutions, Jun - 1999, Richard K. Mayes, CEF |
| In-process Recycling of a Spent Electroless Nickel Plating Bath, Jun - 1999, R.P. Renz, T.M. Schumaker, J.D. Chromick, B.J. Grant, E.J. Taylor, P.O. Miller & C.D. Zhou |
| Electrodialysis of Electroless Nickel Process Solutions: A Comparison of Life Extension Strategies, Jun - 1999, Dr. David Crotty & Michael Barnstead |
| Electroless Palladium, Past & Future, Jun - 1999, Don Baudrand, CEF |
| Is Your Website Millennium-ready?, Jun - 1999, Travis Stirewalt |
| New Rules of the Road: Using the Internet Creatively & Effectively, Jun - 1999, Allan Sweatt |
| A Study of the Behavior of the Anodic Layer in Anodizing with Different Types of Sealing, Jun - 1999, Dr. Xavier Albert Ventura |
| The Impact of Surface Treatment & Interfacial Phenomena on the Anodizing Process, Jun - 1999, Dr. J.M Runge-Marchese & Aaron J. Pomis |
| Surface Treatment of Aluminum Wire, Jun - 1999, Jean-Sylvestre Safrany & G. Colombier |
| Surface Treatment of Aluminum Alloys for Automotive Applications, Jun - 1999, M. Benmalek, J.S. Safrany & E. Hank |
| Discussion on Patents Related to Anodized Aluminum in the Electronics Industry, Jun - 1999, Prof. Dr. Toshihiko Sato & Masayuki Suzuki |
| Application of AA Analysis in Characterization of Aluminum Anodic Coatings Formed on Aluminum Alloys, Jun - 1999, L. Hao, T. Westre & B. Rachel Cheng |
| Copper Electroplating for Advanced Interconnect Technology, Jun - 1999, Robert D. Mikkola, Qing-Tang Jiang, Brad Carpenter |
| Electrolytic Plating of Copper for Emerging Computer Chip Interconnect Technologies: Key Challenges & Opportunities, Jun - 1999, Carl Neely & H.Vincent Reynolds |
| Considerations for Electroplated Copper for Sub-micron Interconnects in Advanced Integrated Circuits, Jun - 1999, Dr. Mihal E. Gross |
| Optimization of Wafer Plating Cell Design Using Finite Difference Calculations, Jun - 1999, Allan H. Reed |
| Copper Interconnect Process Control for an Insoluble Anode System, Jun - 1999, Chin-Chang Cheng, Elena Too, Paul Gerst & Richard Hurtubise |
| Control of Damascene Copper Processes by Cyclic Voltammetric Stripping, Jun - 1999, Dr. Peter Bratin, Gene Chalyt & Michael Pavlov |
| The Effects of Process & Metallurgical Variables on Black Film Formation in Acid Copper Electroplating Using Phosphorized Copper Anodes, Jun - 1999, Richard W. Strachan, CEF-SE |
| Complex Wave Form Pulse Reverse, Jun - 1999, Moti Holtzman |
| Efficient Alkaline Zinc Electroplating, Jun - 1999, Richard Painter |
| On the Troubleshooting Methodology, Jun - 1999, Dr. Ned Mandich, CEF |
| Effect of Rinsing on Zn & Zn-Ni Electroplated Surfaces, Jun - 1999, Hyun-Tae Kim & Young-Sool Jin |
| Final Finishing of a Metal Surface by an Electrochemical Machining (ECM) Process, v - 1999, J.J. Sun, E.J. Taylor, L.E. Gebhart, R.P. Renz & C.D. Zhou |
| Dimensional Changes of Anodized Aluminum, Jun - 1999, Lin Zhang & Shi Hua Zhang |
| Black Dyes for Anodized Aluminum: Properties & Applications, Jun - 1999, Tina Gaddy |
| New Advances in Power Supply Control Systems, Jun - 1999, Peter Pollak |
| Evaluation of Anodizing Process Capability, Jun - 1999, L. Hao, L. Zhang & S. Westre |
| Wear Assessment of Type III Anodized Aluminum, Jun - 1999, Dr. Jean Rasmussen |
| New Developments in Anodizing & Coloring Magnesium, Jun - 1999, P. Ross & J. MacCulloch, R. Esdaile |
| Further Developments in Gold Plating Technology for Microelectronics, Jun - 1999, Stewart J. Hemsley |
| Differential Potentiometric Analysis of Chloride in Bright Acid Tin Solutions, Jun - 1999, John Lindstedt, AESF Fellow, John Tinder & Wenzhong An |
| Solderability Study Comparing the Effects of Barrier Layers on Thermally Aged, Tin-plated Brass, Jun - 1999, Michael J. Brouillard |
| Glossiness, Morphology & Microstructure of Electrodeposited Sn Films, Jun - 1999, Dr. C. Xu, Y. Zhang, P. Chiu & J.A. Abys |
| Miracles in Tin Stripping, Jun - 1999, Doug McKesson |
| Experiments to Develop Novel Nameplates, Jun - 1999, Yoshizou Maruyama, Youichi Uehara, Teruo Toshima , Prof. Dr. Toshihiko Sato |
| Characterization of Corrosion-protective Methods for Electrically Conductive Coatings on Aluminum, Jun - 1999, Michael C. Kimble, Alan S. Woodman & Everett B. Anderson |
| Microstructure & Corrosion Behavior of Electrodeposited Zn-Ni Films, Jun - 1999, A.M. Zaky, Dr. H.W. Pickering, Dr. K.G. Weil, F.H. Assaf |
| A Model-based Dynamic Simulator for Environmental Benign Cleaning & Rinsing, Jun - 1999, H.R. Lou & Y.L. Huang |
| Microelectrodeposition of Cobalt & Its Alloys, Jun - 1999, Prof. P.L. Cavallotti, L. Gobbato, L. Nobili & A. Vicenzo |
| Influence of Pulse Plating on Internal Stresses of Alloy Deposits & Multilayers, Jun - 1999, Dr. A. Zielonka & H. Fauser |
| The Production of Electronic Passive Components: The Electrochemical Way, Jun - 1999, Dr. T.E.G. Daenen, D.L. de Kubber, C. van der Staak & Dr. M. Fluester |
| Structuring & Plating of Materials with Ultrashort Laser Pulses, Jun - 1999, Dr. W. Paatsch, W. Kautek & J. Kruger |
| Exploitation of Eductor Agitation in Copper Electroplating, Jun - 1999, Dr. D.R. Gabe, M. Ward, J.N. Crosby |
| Mastering Layer Thickness Distribution, Jun - 1999, G. Nelissen, A. Van Theemsche, S. Lecho & J. Deconinck |
| A New Cyanide-free & Non-sulfite-based Gold Plating Process, Jun - 1999, Dr. F. Simon & W. Kuhn |
| Evolution of Group IV-A Chromate Alternatives: Survival of the Fittest, Jun - 1999, Charles E. Tomlinson |
| A Method to Predict the Anodic Coating Thickness of Mixed Alloy Anodizing, Jun - 1999, Shi Hua Zhang & Lin Zhang |
| Quality Assessment of Anodized Aluminum, Jun - 1999, Scott Olbrantz, Dr. Jean Rasmussen |
| Aluminum Build-up Rates Under Type II & Type III Anodizing Conditions, Jun - 1999, Lin Zhang, Tami Westre, Shi Hua Zhang & B. Rachel Cheng |
| Printed Circuit Fabrication, 1950-1999: An Overview, Jun - 1999, James P. Langan |
| An Examination of the Shelf Life of Five Solderable Coatings in Real Time Using a Wetting Balance, Jun - 1999, Gerard O'Brien |
| Optimization of Adhesive Bond Strength to Tin-plated PWBs: Synergy Between Plating Conditions & Adhesive Formulation, Jun - 1999, Dr. A.M. Lyons, B.F. Stacy, J.L. Bream & Y. Zhang, D. Doyle, B. Lowry, R. Suttman |
| Electroplating of Lead-free Solder Alloys Composed of Sn-Bi, Sn-Ag & Sn-Cu, Jun - 1999, Isamu Yanada, Donald Gudeczauskas |
| Cleaning Issues in the Surface Finishing Industry Practical Performance & Environmental Synergies, Jun - 1999, Richard Reynolds |
| Effect of Coating on Forming Properties for Lubricant-coated Steel Sheet, Jun - 1999, Dr. Chan-Sup Park & Yong-Gyun Jung |
| Decorative/Protective Electrophoretic Coatings An Environmentally Friendly Alternative to Electroplating & Other Finishes, Jun - 1999, Peter Ryder |
| Electrocoating, Powder Coating & Heavy Duty Truck Bumpers A Case History, Jun - 1999, Lyle E. Gilber |
| Improving the Quality of Pretreatment for Surface Finishing by the Use of Filtration & Agitation, Jun - 1999, Charles R. Reichert, CEF-SE |
| Surface Preparation of Various Metal Alloys Before Plating, Jun - 1999, Stephen F. Rudy, CEF |
| UV-cured Coatings, Jun - 1999, John Owed |
| Cyanide Replacement in Zinc Plating: A Case History, Jun - 1999, Dr. Juan Hajdu |
| Alkaline Cyanide-free Copper Process for Functional & Decorative Plating, Jun - 1999, Eric Olander |
| Cyanide-containing Zincate Pretreatment Processes for Plating on Aluminum & Its Alloys: Are They Really Necessary?, Jun - 1999, Barry Williams |
| A New Alkaline CN-free Silver Process for Electronic, Industrial & Decorative Plating Applications, Jun - 1999, Eric Olander & Jun Cheng |
| Corrosion Studies of Metallic Finishes in Electronics, Jun - 1999, Sudarshan Lal |
| Palladium Cobalt Plating A Successful Scale-up to the Production Environment, Jun - 1999, G.F. Breck, C. Dullaghan, J. Maisano & J.A. Abys, I. Boguslavsky & G. Schnayderman |
| Approaches to Porosity Reduction in Connector Surface Finish, Jun - 1999, Dr. C. Fan, B. Smith, C. Xu, C.A. Dullaghan & J.A. Abys |
| Failure of Electroplated Deposits Detection & Prevention, Jun - 1999, Donald W. Baudrand, CEF |
| Formulation of Accelerated Stress Tests for Corrosion Failure, Jun - 1999, Dr. Richard Haynes |
| Old & New Technologies Recycle 75 Million Gallons of Water, Saving $100,000/yr for Lithoplating Manufacturer, Jun - 1999, [missing] |
| An Alternative Dewatering Press, Jun - 1999, Dale E. Wettlaufer |
| Applications of Weak Acid Cation Resin in Waste Treatment, Jun - 1999, Peter Meyers |
| Oil Absorption Filters for Aqueous Solutions, Jun - 1999, David Hansell & Hans Huizinga |
| How to Avoid Contamination of Cations & Anions in Surface Treatment Processes, Jun - 1999, Dr. Xavier Albert |
| Zero Discharge Metal Finishing Using Combined Microfiltration & Reverse Osmosis, Jun - 1999, Kevin Donahue |
| Meeting Environmental Compliance in an Integrated Manufacturing Facility by the Application of Cationic Polymers & Metal Precipitants, Jun - 1999, Mark E. Andrus |
| The Automotive Industry's Aim for Quality, Jun - 1999, Linda M. Wing |
| A Review of What's New in ISO 9000 (2000), Jun - 1999, Terry Dipple |
| ISO 14001 as Applied to Metal Finishing, Jun - 1999, Craig Slanker |
| Improving Your Metal Finishing Lab's Analytical Reports Using Excel 97, Jun - 1999, Fred Mueller, CEF |
| Quality Control with XRF, Jun - 1999, Kathe Mayer, CEF |
| Purification of Hard Chrome Bath Using Patented Ion Exchange Technology, Jun - 1999, Mohammed Abid |
| Detailed Evaluation of Membrane Solution Maintenance for Chromic Acid, Jun - 1999, Electroplating Jeffrey R. Lord, CEF |
| Novel Chromate Replacements in Metal Finishing, Jun - 1999, Dr. T.F. Child, Dr. W.J. van Ooij |
| Electrochemical Regeneration of Solutions Based on Hydrogen Peroxide & Persulfates, Jun - 1999, Prof. Dr. Sci. Sergei S. Kruglikov & Dmitri Yu |
| Environmental Technology Verification for Metal Finishing, Jun - 1999, Alva Edwards Daniels, James E. Voytko, CEF, Donn Brown |
| Corrosion as a Driving Force for Wastewater Process Decontamination, Jun - 1999, Aleksandr Pikelny & Olga Pikelnaya |
| Quality in the Metal Finishing Industry, Jun - 1999, Bud Gookins |
| Quality Control of Plating Additives Using Dyamic Surface Tension Measurement, Jun - 1999, Victor P. Janule |
| Fundamentals of ISL Hydrogen Embrittlement Testing & Comparison to Currently Used Methods in the Plating Industry, Jun - 1999, Marc M. Crankshaw |
| Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners An Introduction to ASTM Standard Test Method F1940, Jun - 1999, Dr. J. Barton Boodey |
| Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners An Experimental-based Evaluation of the Test Method, Jun - 1999, Dr. Salim Brahimi |
| Advances in XRF Technology for Plating Quality Control, Jun - 1999, Don Kloos |
| Development of Corrosion-resistant Coatings for Fuel Cell Bipolar Plates, Jun - 1999, A.S. Woodman, E.B. Anderson, K.D. Jayne & M.C. Kimble |
| Trends in Alloy Plating in Japan, Jun - 1999, Dr. Tadao Hayashi |
| Effect of Temperature on Fe-Mn Alloys Codeposited (By Electrodeposition vs. Electroless Processes) on Bare Steel or Bare Carbonitrided Fe Substrate Without the Use of Complexing Agents, Jun - 1999, Bassey J. Udofot, P.J.P. Farr & Brerjendra Mishra |
| An Economic Alternative to Decorative Palladium Plating PdCo, Jun - 1999, Alan Blair, C. Dullaghan & B.F. Stacy, Jimmy Kwok |
| Alloy Deposition of Alternatives to Chromium & Cadmium, Jun - 1999, M. Klingenberg, M.A.B. Pavlik & E.W. Brooman |
| Stabilizing of Trivalent Chromium Plating Bath by Means of Membrane Electrolysis, Jun - 1999, Prof. Dr. Sci. Sergei S. Kruglikov & Dmitri Yu. Turaev, S.S. Kruglikov, Prof. Dr. Sci. Vladimir N. Kudryavtsev & Dr. Mikhail M. Yarlykov & Steven R. Schachameyer |
| In-process Recycling of a Hexavalent Chromium Plating Bath, Jun - 1999, R.P. Renz, T.M. Schumaker, J.D. Chromick, B.J. Grant, E.J. Taylor, P.O. Miller & C.D. Zhou |
| Case Study on the Replacement of Electrolytic Hard Chrome Plating with Tungsten Carbides Applied by HVOF on AerMet 100 Alloy A Holistic Approach to Coating, Jun - 1999, Jim Nuse, Stan Klein, & Paul Novotny |
| Implementing New Plating Processes by Designing Equipment for Quality & Flexibility, Jun - 1999, T. Bolch & Dr. Harald Holeczek |
| Chemistry & Equipment for Ultra-high-speed Functional Chromium Plating, Jun - 1999, Dr. Kenneth Newby |
| Waste Acid Detoxification and Reclamation, - 1999, Philip Darcy |
| Spent Acid Recovery Using Diffusion Dialysis , - 1999, Nick Stencel |
| Reverse Osmosis Applications for Metal Finishing Operations, - 1999, Merit Partnership |
| Thermal Spray Coatings Replace Hard Chrome Plating on Aircraft Components, - 1999, Sartwell, Bruce D |
| Closed Loop Aqueous Washing, #70, - 1999, Heller, Dick |
| Parts Cleaning, - 1999, Arle, Paul G |
| Precision Cleaning for Advanced Technologies, - 1999, Hill, Liz and West, Yale and Sherman, Robert, Dr. and Sloan, Jeff |
| Plated and Soldier Dipped Finishes for Semiconductor Componenets, - 1999, Kent Walters |
| Removal of Harmful Metals From Metal Plating Waste Waters Using Selective Ion Exchangers, - 1999, Heikki Leinonen |
| Recovery of Metals from Electroplating Waste Solutions and Sludge. Comparison of Donnan Dialysis and Pertraction Technique , - 1999, R. Wódzki1, P. Szczepa?ski1, M. Paw?owski |
| Plated and Solder Dipped Finishes for Semiconductor Components, - 1999, Kent Walters Microsemi - Corporate Applications |
| Report Series in Radiochemistry: Removal of harmful metals from metal plating waste waters using selective ion exchangers, - 1999, Heikki Leinonen |
| Emission Estimation Technique Manual for Electroplating and Anodising, - 1999, National Pollutant Inventory |
| The 40th William Blum Lecture, Faraday’s Children (and Nickel), - 1999, Dr. George A. DiBari |
| Twin City Plating's Experiences with EN--No Job Too Big or Too Small, Jun - 1998, Roger Plath & Howard Weiss, Twin City Plating |
| Zn & Cu-Ni-Cr Plating at NiCo Plating, Jun - 1998, Jon Phillips & Dave Benik, NiCo Plating |
| A Comparison of Alkaline Zinc Plating With Potassium & Sodium Salts, Jun - 1998, Dr. David Crotty, MacDermid, Inc |
| The Electrolytic Recovery of Zinc from Galvanizing Plant Waste, Jun - 1998, Professor Thomas M. Harris & Valerie Codner, University of Tulsa |
| Composition-modulated Alloy Electrodeposits of Zn-Fe: A Progress Report, Jun - 1998, Liao Yongzhong, J.D. Jensen , G.D. Wilcox & D. R. Gabe, Materials Engineering, IPTME, Loughborough University |
| Zinc-Cobalt Alloy Deposition Using a Potassium Hydroxide Electrolyte, Jun - 1998, Vijay J. Kansupada & Victor Waldman, Enthone-OMI, Inc. |
| Effects of Zinc-Nickel Alloy Composition, Jun - 1998, Craig V. Bishop, Lawrence Emch & Dale Block, McGean-Rohco, Inc., Cleveland, OH & Frank Freitas, Central Metal Finishing |
| Conductivity Measurements of Some Zinc Alloy Plating Solutions, Jun - 1998, G. Guvendik, C.J. Roberts & D.R. Gabe, Materials Engineering |
| Some Information on Electroless Gold Plating, Jan - 1998, PF editor |
| Troubleshooting Tribo, Jan - 1998, Sergey Guskov |
| Pretreatment for Powder Coating, Jan - 1998, PF editor |
| Thermoset Solution Fluorocarbon Coil Coatings, Jan - 1998, Thomas E. Ballway |
| A Look at a President, Jan - 1998, Bev Graves |
| National Association of Metal Finishers (NAMF), Jan - 1998, PF editor |
| Nice Guys Finish First, Feb - 1998, PF editor |
| End disposition of F006 Sludge and Management of D002 Etchant [ComplianceNet], Jan - 1998, [no author] |
| Drilling Dust [ComplianceNet], Jan - 1998, [no author] |
| Membranes [ComplianceNet], Jan - 1998, [no author] |
| SODIUM HYPOCHLORITE vs. CHLORINE GAS [ComplianceNet], Jan - 1998, [no author] |
| Formaldehyde Emissions [ComplianceNet], Feb - 1998, [no author] |
| New technology / need market data [ComplianceNet], Feb - 1998, [no author] |
| Hot Air Leveling and emissions control [ComplianceNet], Feb - 1998, [no author] |
| TRI Reporting of Acid Aerosols [ComplianceNet], Mar - 1998, [no author] |
| Environmental (EPA) and safety (OSHA) integration [ComplianceNet], Apr - 1998, [no author] |
| Solder Paste [ComplianceNet], Apr - 1998, [no author] |
| Drilling & routing dust [ComplianceNet], May - 1998, [no author] |
| Resist stripper skins [ComplianceNet], May - 1998, [no author] |
| Environmental Aspects of Acquisitions & Mergers, April - 1998, John S. Schroeder and Harry L. Schroeder |
| Wastewater Treatment for Printed Circuit Manufacturers, May - 1998, Robert Mesick |
| Chemical Reporting Questions, Sep - 1998, [no author] |
| Recycling Plating Solution, Jul - 1998, [no author] |
| F006, Jul - 1998, [no author] |
| Inexpensive Way To Treat Waste Water, Jul - 1998, [no author] |
| Nitric Acid Based Solder Strip, Jul - 1998, [no author] |
| CEM-1 and UL approval, Jul - 1998, [no author] |
| Trichloroethylene expert / Phil Hinton, Jun - 1998, [no author] |
| 1996 TRI Reporting Data Released, Jun - 1998, [no author] |
| Non Reportable Copper, Amonia and HCl Transfers, Jun - 1998, [no author] |
| Router Dust Disposal, Jun - 1998, [no author] |
| TRI Reporting Of Ammoniacal Etchant, Jun - 1998, [no author] |
| Wordgroup Report: F006 Benchmarking Study, Sep - 1998, [no author] |
| Max Out Your Clarifier & Filter Press, Jan - 1998, Thomas H. Martin |
| Chlorinated Solvents--Still the Best Choice for Vapor Degreasing, Jan - 1998, James A. Mertens |
| Cleaning Options for Degreasing & Surface Preparation, Jan - 1998, Barbara Kanegsberg |
| Analytically Speaking: Characterization of Deposits, Coatings & Electroforms, Part 2: Mechanical Properties Measurement, Jan - 1998, Dr. Rolf Weil |
| Advice and Council: Keeping It Simple, Part I, Jan - 1998, Frank Altmayer |
| A Novel Dynamic Process for Chemical Reduction Plating, Jan - 1998, A. Fares Karam & G. Stremsdoerfer |
| Alternatives in Air Emission Modeling for Characterization of Processes & Process Change, Jan - 1998, J.R. Lord & P. Gallerani |
| Modeling & Cell Design for Metal Deposition Processes with Complex Geometry, Jan - 1998, J. Zoric, I. Rousar and K. Bousek |
| A Chromium/Graphite Electrodeposited Composite Coating for Unlubricated Sliding Wear, Jan - 1998, D. Yang & C. Jiang |
| Proper Design is Essential For a Quality Finish, Feb - 1998, No Author |
| Analytically Speaking: Characterization of Deposits, Coatings & Electroforms, Part 3: Fundamental Aspects of Mechanical Properties, Feb - 1998, Dr. Rolf Weil |
| Flip-chip Technology on PWBs, Feb - 1998, James P. Langan |
| Finishers' Think Tank: Filtration, Pore Size & Current Density, Feb - 1998, Marty Borruso |
| Turning Your OSHA Process Safety Management Plan Into an EPA Risk Manangement Plan, Feb - 1998, Joelie Hill |
| PVD Processes: Vacuum Gauges for the Pasma Environment, Feb - 1998, Donald M. Mattox |
| Bright Tin-Silver Alloy Electrodeposition from an Organic Sulfonate Bath Containing Pyrophosphate, Iodide & Triethanolamine as Chelating Agents, Feb - 1998, T. Kondo, K. Obata, T. Takeuchi & S. Masaki |
| Electro-oxidation of Ascorbic Acid in an Aqueous Citrate Buffer Solution, Feb - 1998, A.M. Sullivan & P.A. Kohl |
| Electrochemical Preparation & Mechanical Properties Of Amorphous Nickel-SiC Composites, Feb - 1998, D.H. Cheng, W.Y. Xu, L.Q. Hua, Z.Y. Zhang & X.J. Wan |
| Cathode Process in Nickel-cobalt Alloy Deposition from Sulfamate Electrolytes-Application to Electroforming, Feb - 1998, D. Golodnitsky, N.V. Gudin & G.A. Volyanuk |
| Hands-On Management: ISO Helpful Hints, Part 2, Feb - 1998, Fred Mueller, CEF |
| Reduction of Nickel in Plating Operation
Effluent With Nanofiltration, Jan - 1998, By Phil Katselnik & Samy Y. Morcos, CEF |
| Hands-On Management: ISO Helpful Hints, Part 1, Jan - 1998, Fred Mueller, CEF |
| Finishing Plays a Key Role in Restoring the Mustang, Mar - 1998, PSF staff |
| Plating Team Builds Unique Shop at Boeing Portland, Mar - 1998, Neil Cernitz & Bradley C. Johnson |
| Kelly AFB Plating Shop & Science & Engineering Lab Keep Government Planes Flightworthy, Mar - 1998, PSF staff |
| Analytically Speaking: Characterization of Deposits, Coatings & Electroforms, Part 4: Mechanical Properties—Elastic Behavior & Yielding, Mar - 1998, Dr. Rolf Weil |
| Advice and Council: Keeping It Simple, Part III, Mar - 1998, Frank Altmayer |
| Custom Mass Plating (CMP) Is Becoming a Reality, Mar - 1998, Steve Koelzer |
| SVC Topics: PVD Processes: Atomic Arrangement, Mar - 1998, Donald M. Mattox |
| Health and Safety: OSHA Training Under RCRA, Mar - 1998, John A. Stevenson |
| Powder Coating Commentary: Next Step: A Paradigm Shift In the Finishing Industry, Mar - 1998, David O'Ryan |
| A Study of Zinc-Iron Alloy Electrodeposition Using a Rotating Cylinder Hull Cell, Mar - 1998, Y. Liao, D.R. Gabe and G.D. Wilcox |
| Pre-Sealing of Anodized Aluminum in a Triethanolamine Solution at 50C, Mar - 1998, V. López, A. Bautista, E. Otero & J.A. González |
| Characterization of Electrodeposited Iron From a Chloride Bath without Anodic Etching, Mar - 1998, Xintan Hu & Xiaolei Xu |
| Aging Effects of Electroless Cobalt Bath On Microstructure & Magnetic Properties of Co-P Films, Mar - 1998, E.E. Kalu |
| Corrosion Control for Metallized MCMs & Hybrid Circuits, Apr - 1998, Don Baudrand |
| Analytically Speaking: Mechanical Properties ‐ Plastic Properties & Fracture, Apr - 1998, Dr. Rolf Weil |
| Advice and Council: MP&M (Again), Apr - 1998, Frank Altmayer |
| Circuit Technology: Reliability of Contact Surface Finishes, Apr - 1998, James P. Langan |
| Design Engineering: Advanced Electronics Finishing, Apr - 1998, Steve Koelzer |
| Health and Safety: New Safety Coordinator's Manual: A Health & Safety Professional's Dream, Apr - 1998, Martha S. Martin |
| SVC Topics: PVD Processes: Glass as a Substrate Material, Apr - 1998, Donald M. Mattox |
| Electrodeposition, Growth Morphology & Melting Characteristics of Gold-Tin Eutectic Alloys, Apr - 1998, G. Holmbom, J.A. Abys, H.K. Straschil & M. Svensson |
| The Role of Electroless Plating Bath Constituents in the Catalytic Oxidation of the Hypophosphite Ion, Apr - 1998, N.K.Dirjal, K.A.Holbrook & P.B.Wells |
| Co-W Alloys for Replacement Of Conventional Hard Chromium, Apr - 1998, S. Eskin, O. Berkh, G. Rogalsky & J. Zahavi |
| The Mechanism of Electrodeposition of Chromium Coatings with Different Phase Structure, Apr - 1998, Z.A. Solovyeva |
| There's No Job Too Big or Small For This Minneapolis Finisher, May - 1998, PSF Staff |
| Why Use Electroless Nickel Today?, May - 1998, James Bates |
| Advice and Council, May - 1998, Frank Altmayer |
| Air Quality, May - 1998, Jack W. Dini |
| Design Engineering: How Things "Stick", May - 1998, Steve Koelzer |
| Health and Safety: OSHA Training Requirements, May - 1998, Robert F. Lee |
| PVD Processes: Safety Aspects of Vacuum Processing, May - 1998, Donald M. Mattox |
| Powder Coating Commentary: Next Step: A Paradigm Shift In the Finishing Industry, Part II, May - 1998, David O'Ryan |
| A Laboratory Study of the Cathodic Protection Afforded by 55-percent Al-Zn Coating in Comparison with a Galvanized Coating, May - 1998, E. Palma & M. Morcillo |
| Electroless Copper Plating on PZT Ceramic, May - 1998, T. Fujinami & H. Honma |
| Effect of Temperature & Triethanolamine Addition on The Kinetics of Sealing Anodized Aluminum, May - 1998, A. Bautista, E. Otero, V. López & J.A. González |
| Electropolishing of Titanium and Titanium Alloys in Perchlorate-Free Electrolytes, May - 1998, O. Piotrowski, C. Madore & D. Landolt |
| Finisher's Simple Approach Has Kept His Jobshop Healthy & Growing, Jun - 1998, PSF Staff |
| Continuous Training & Good Citizenship Lead to Success for Minneapolis Jobshop, Jun - 1998, PSF Staff |
| Influence of Laser Irradiation on Metal Electrodeposition, Jun - 1998, M. Bratoeva & S. Gurkovsky |
| An Alternative Surface Finish for Tin-Lead Solders, Jun - 1998, Y. Zhang, J.A. Abys, C.H. Chen & T. Siegrist |
| Structure Changes and Formation Of Bunsenite (NiO) at Recrystallization Of Electrolytically Deposited Ni-Mn-S Layers, Jun - 1998, N. Atanassov & H.W. Schils |
| The Chromium NESHAP & EPA's Focus on Operation & Maintenance Plans: Avoiding the Hidden Pitfalls, Jun - 1998, Susan A. Murphy |
| Trends in Electrocoating: Largest Contract Coating System In North America to Go On-line This Fall, Jul - 1998, PSF Staff |
| Thermoplastic Powder & a Ceramic Filler Make an Easy-to-clean Finish For Pharmaceutical Equipment, Jul - 1998, PSF Staff |
| Powder Coated Toolboxes Look Better & Last Longer, Jul - 1998, PSF Staff |
| A Winning Formula: Fabrication Painting Of Structural Steel Before Construction, Jul - 1998, PSF Staff |
| Advice and Council: How to Stay in Business ‐ Addressing EPA & RCRA Issues, Jul - 1998, Frank Altmayer |
| Health and Safety: AESF OSHA Safety & Compliance Course, Jul - 1998, Martha S. Martin |
| Finisher's Think Tank, Jul - 1998, Marty Borruso |
| Hands-on Management: Powder Coating: It Just Keeps Growing & Growing, Jul - 1998, Fred Mueller |
| Design Engineering: Micro- & Nano-Finishing, Jul - 1998, Steve Koelzer |
| PVD Processes: Scanning Electron Microscopy (SEM), Jul - 1998, Donald M. Mattox |
| Maintaining Security & Privacy on the Internet, Jul - 1998, Ted Witt |
| Powder Coating Commentary: To Test or Not To Test?, Jul - 1998, David O'Ryan |
| Electrochemical Behavior of AlCl 3 In Propylene Carbonate at Room Temperature, Jul - 1998, G. Manoli, Y. Chryssoulakis & C. Tsintavis |
| Direct Metallization Using Sulfonation of Thermosetting Polyphenylene Ether Resin Laminate-Experimental Procedure Chemical Roughing & Sulfonation of the A-PPE Resin Surface, Jul - 1998, H. Nawafune, T. Kanai, S. Mizumoto & M. Seita |
| Hard Anodizing Behavior of Aluminum Alloy DTD 5124 Containing Varying Amounts of Impurities Under Different Electrolytic Conditions, Jul - 1998, A.K. Sharma, H. Bhojraj, H. Narayanamurthy & A.V. Patki |
| Effect of Isomeric Dipyridyls On Electroless Copper Deposition from EDTA Solutions, Jul - 1998, L.L. Duda |
| Alloys are Promising As Chromium or Cadimum Substitutes, Aug - 1998, George E. Shahin |
| Powder Coating Teams With Magnesium For Growth In High-Tech Consumer Products, Aug - 1998, PSF Staff |
| An Interview With AESF's Technical Director, Aug - 1998, PSF Staff |
| Advice and Council: Hot About Heating Coils, Aug - 1998, Frank Altmayer |
| Design Engineering: New Possibilities with Alloy Engineering, Aug - 1998, Steve Koelzer |
| Health and Safety: OSHA's Regulatory Agenda, Aug - 1998, John A. Stevenson |
| Phytoremediation "From Condiment to Toxic Cleanup" "How About a Jar of the World's Heaviest Mustard?", Aug - 1998, Jack W. Dini |
| The Metal Finishing Shop Directory, Aug - 1998, William D. "Bill" Bonivert and George Cushnie |
| Hands-On Management: Good Cleaning Practices Part 1: Low-tech Methods, Aug - 1998, Fred Mueller |
| PVD Processes: Heating & Temperature Measurement, Aug - 1998, Donald M. Mattox |
| Nickel Plating on Steel by Chemical Reduction, Aug - 1998, Abner Brenner & Grace E. Riddell |
| Determination of Hydrogen Thermally Evolved from Barrel-Zinc-Plated Steel: a Gas Chromatographic Method, Aug - 1998, M. Wery, F.X. Perrin & J. Pagetti |
| Microstructural Morphology of Zn-Fe Alloy Electrodeposited Coatings, Aug - 1998, Y. Liao, D.R. Gabe & G.D. Wilcox |
| Theoretical and Practical Aspects of Electrodeposition Of Metal Coatings with Improved Properties (Part 1), Aug - 1998, Mois Aroyo |
| Interview With the 1998 AESF Scientific Achievement Award Winner: Dr. George Di Bari, Sep - 1998, PSF Staff |
| Automotive Chrome ‐ It's Back, Sep - 1998, Dr. Donald Snyder |
| Finishing for the Automotive Market Is Alive & Well in Southern California, Sep - 1998, PSF Staff |
| Advice and Council:
10 Questions on Electroforming, Sep - 1998, Frank Altmayer |
| Design Engineering: Two-bit Engineering, Sep - 1998, Steve Koelzer |
| Proposed Regulations May Alleviate Accumulation Burdens for F006 Generators, Sep - 1998, Gina I. Flanagan |
| Good Cleaning Practices Part 2: High-tech Methods, Sep - 1998, Fred Mueller, CEF |
| Finishers' Think Tank, Sep - 1998, Marty Borruso |
| Fact or Fiction: Cost-effectiveness of Life-saving Interventions, Sep - 1998, Jack W. Dini |
| The Strategic Goals Website, Sep - 1998, Robert McDowell, Sr. |
| PVD Processes: Leaks & Leak Detection Real Leaks, Sep - 1998, Donald M. Mattox |
| MFSA Very Active at SUR/FIN '98, Sep - 1998, Diana L. Tringali |
| New Abrasive Belt Helps Plating Shop Increase Bumper Production, Oct - 1998, PSF Staff |
| What ASTM Standard B 456 & ISO Standard 1456 Teach Us About the Standardization Process & Decorative Electroplated Nickel-plus-Chromium Coatings, Oct - 1998, George A. Dinari |
| How Chelating Resins Behave, Oct - 1998, Peter S. Meyers |
| Circuit Technology: Design for Manufacturability, Oct - 1998, James P. Langan |
| Design Engineering: Cleaning & Pretreatment & How They Concern Design Engineers, Oct - 1998, Steve Koelzer |
| What's Wrong With This Picture?, Oct - 1998, Martha S. Martin |
| Compliance Assistance Resources, Oct - 1998, George Cushnie/William D. "Bill" Bonivert |
| London Metals Exchange (LME), Oct - 1998, Fred Mueller |
| Fact or Fiction: Killer Rocks, Oct - 1998, Jack W. Dini |
| PVD Processes: Scanning Laser Confocal Optical Microscope, Oct - 1998, Donald M. Mattox |
| Mass Transfer of Components of Zinc Chromating Solutions ‐ Part 1; Mass Transfer of Species Containing Cr(VI),Cr(III)&Zn(II), Oct - 1998, R. Sarmaitis & A. Survila |
| Structure & Properties Of Electroless Ni-P-B 4 C Composite Coatings, Oct - 1998, J-P. Ge, R.X. Che & X.Z. Wang |
| Simultaneous Analysis of Silver Plating Bath Comprising Silver Cyanide, Phosphate & Mercaptobenzothiazole Derivatives, Oct - 1998, K. Hwang, S.A. Choi & C. Cho |
| DOE Program Promotes Efficient Energy Use, Oct - 1998, John Laurilliard |
| MFSA Resources on Pretreatment, Oct - 1998, Diana L. Tringali |
| Acid Sulfate & Pyrophosphate Copper Plating Applications, Nov - 1998, Allen C. Hamilton Jr. |
| Anodizing, Nov - 1998, David C. Montgomery |
| Brass Plating Applications, Nov - 1998, Arthur J. Kowalski |
| Cadmium Plating Applications, Nov - 1998, William H. Safranek |
| Cyanide Copper Plating Applications, Nov - 1998, Jack Horner |
| Decorative & Hard Chromium Plating Applications, Nov - 1998, Dr. James H. Lindsay Jr. |
| Electroless Processes Applications, Nov - 1998, Donald Baudrand |
| Gold Plating, Nov - 1998, Alan Blair |
| Nickel Plating, Nov - 1998, Dr. George A. DiBari |
| Organic Finishing & Pretreatment, Nov - 1998, James E. Voytko |
| Palladium Plating, Nov - 1998, Dr. Joseph A. Abys |
| Powder Coating: The Dry Paint, Nov - 1998, J. David Adams |
| Rhodium Plating, Nov - 1998, Dr. Ronald J. Morrissey |
| Silver Plating, Nov - 1998, Alan Blair |
| Tin Plating, Nov - 1998, Michael Carano |
| Tin-Lead Plating, Nov - 1998, Michael Carano |
| Zinc Plating, Nov - 1998, Steve Schneider |
| Improved Copper Plating Through the Use of Current Pulsing & Ultrasonic Agitation, Nov - 1998, Peter Kristof & Mark Pritzker |
| Electroless Co-P-PTFE Composite Coatings, Nov - 1998, J. Tang, S. Zhou & Y. Xie |
| Arc-Free Anodizing of Aluminum, Nov - 1998, Moisey Lerner |
| Composite Electroless Nickel Coatings For the Aerospace & Airline Industries, Nov - 1998, Michael D. Feldstein |
| A Risk Assessment Tool in the Metal Finishing Industry, Feb - 1998, Ihab Farag, Sc.D., P.E., Dept. of Chemical Engineering, University of New Hampshire (UNH), Durham, NH & Dwight Peavey & Len Wallace, U.S. EPA, Boston, MA |
| Process Wastewater Reuse: Making It Happen, Feb - 1998, Christopher Riley, P.E., U.S. FilterRecovery Services, Inc |
| Closed-loop Rinse water Recycling vs. Once-through Water Usage & Discharge (An Analysis of Operating Costs), Feb - 1998, Greg White, Hydromatix, Inc., Santa Fe Springs, CA |
| Treating Byproducts of closed-loop Systems, Feb - 1998, Stephen Perrone, Aqualogic Inc., North Haven, CT |
| Closed Loop Plating Systems That Recover Rinsewater & Improve Rinsing, Feb - 1998, Robert Burford, CEF, PASCO, Lancaster, PA |
| Pollution Prevention at Midwest Steel, Feb - 1998, John Olashuk, Kevin Doyle, Frank Bottos & Branko Alavanja, National Steel Corporation, Mishawaka, IN |
| Use of Mist Suppressants in Hard Chromium Tanks, Feb - 1998, David Ferguson, National Risk Management Research Laboratory, U.S. EPA, Cincinnati, OH |
| Effect of Pollution Prevention on the Functional Properties of Hard Chrome Plate, Feb - 1998, Jeffrey Lord, The Black Company Environmental, Copley, OH |
| Merit Partnership Pollution Prevention Project for Metal Finishers, Feb - 1998, Laura Bloch, U.S. EPA Region IX, San Francisco, CA; Michael Keefe, Tetra Tech EM Inc., San Francisco, CA; & John Siemak, California Manufacturing Technology Center (CMTC), Hawthorne, CA |
| The Ammoniacal Etch Regeneration System: Technical, Environmental & Economic Factors, Feb - 1998, Christopher Ford, Printed Circuit Corp., Woburn, MA |
| Recovery & Maintenance of Process Solutions in the Electronics Industry, Feb - 1998, Dr. Fred Reinhard, CH2M Hill, Bloomington, MN & Andreas Deuschle, OSMOTA, GmbH, Rutesheim, Germany |
| SEPS in Lieu of Penalties, Feb - 1998, Richard Kanoff, Keegan, Werlin & Pabian, LLP, Boston, MA |
| Optimizing Environmental Compliance Costs & Removal Credits, Feb - 1998, John Hall & William Hall, Hall & Associates, Washington, DC |
| A New Tool for Small Businesses: Congressional Testimony, Feb - 1998, Michael Kerr, CHMM, REP, Circuit Center, Inc., Dayton, OH |
| How Chelating Resins Behave, Feb - 1998, Peter Meyers, ResinTech, Inc., Cherry Hill, NJ |
| Nitric Acid Recycling at Hughes Missile Systems Company, Feb - 1998, Paul Fecsik, CEF, Hughes Missile Systems Company, Tucson, AZ |
| Economic Effects of Energy Use by Evaporators, Feb - 1998, Frank Hoffman, Calfran International, Inc., Springfield, MA |
| Metal Recovery & Cyanide Destruction By Electrolysis, Feb - 1998, Norman Volle, CEF, Bewt Systems Inc., Chesterfield, MO |
| Inprocess Recycling of Plating Rinsewater for PWB Operations Using an Electrochange Recovery System, Feb - 1998, R.P. Renz, T.R. Fritchley, J.J. Sun, E.J. Taylor & C.D. Zhou, Faraday Technology, Inc., Clayton, OH |
| Fundamentals of Evaporation & Evaporators for Plating Baths & Rinse Water Recovery in the Surface Finishing Industry, Feb - 1998, W.J. McLay, QVF Process Systems, Inc., Horseheads, NY |
| ANSI/ISO 14001 Section 4.3.1: A Method Developed for Assessing & Prioritizing Environmental Aspects, Feb - 1998, Andrea Clemencio & Patrick Curran, Long Manufacturing Ltd., Oakville, Ontario, Canada |
| Integrating Environmental Inventory Analysis with Detailed Printed Wiring Board Fabrication Cost Modeling, Feb - 1998, Peter Sandborn, Savantage, Inc., Austin, TX |
| Reducing Costs with Modern Equipment & Instrumentation, Feb - 1998, Thomas Martin, CEF, Delta Chemicals & Equipment, Inc., Indianapolis, IN |
| New Software for Process Control, Feb - 1998, Bill Vins, Semflex, Inc., Mesa, AZ |
| Realtime Monitoring & Control of Electroless Plating, Feb - 1998, Richard Smith & Arthur Wasserman, Group EP, Inc., New York, NY |
| Closed-loop Bright Nickel Electroplating, Feb - 1998, O. Igel, H. Smith & Dr. D. Snyder, Atotech USA, Inc., Rock Hill, SC |
| A Study of Economical (Low Tech) Technologies for Soak Cleaner/Oil Separation: Case Studies, Feb - 1998, Mike Horton Sr., CEF, Enequist Chemical Co., Inc., Philadelphia, PA & Fred Mueller, CEF, Pottstown Plating Works, Inc., Philadelphia, PA |
| Integrating Pollution Prevention into In-plant Aqueous Cleaning Processes, Feb - 1998, John Scambos, Aqueous Recovery Resources, Inc., Bedford Hills, NY |
| Coating Systems That Compete with Chromates, Feb - 1998, Charles Tomlinson, Natural Coating Systems, LLC, Martinsville, IN |
| Silane-based Conversion Coating for Metals, Feb - 1998, Paul Randall, U.S. EPA, Cincinnati, OH & Dr. W.J. van Ooij, University of Cincinnati, Department of Materials Science & Engineering, Cincinnati, OH |
| Consideration for Total Pollution Control: Energy Conservation & Process Control Utilizing Covered Tanks, Feb - 1998, Kenneth Hankinson, Tom Brady & Adam Chmielewski, KCH Services, Inc., Forest City, NC |
| Mitigation of Regulatory Influences Through Operational Paradigm Shifts: Changing How We Think About the Work to Reduce Environmental Impacts, Feb - 1998, Thomas Schoonover & Brad Johnson, The Boeing Co., Portland, OR |
| Integrating Quality & Environmental Management Systems, Feb - 1998, Darin Childers, CHMM, Bell Helicopter Textron, Inc., Ft. Worth, TX |
| Economic Improvement Through Environmental Compliance, Feb - 1998, Rudolph Cartier Jr., P.E., New Hampshire Department of Environmental Services, Concord, NH |
| Helping the Metal Finishing Industry Go Beyond Environmental Compliance with Pollution Prevention: CLEANP2, Feb - 1998, hab Farag, Sc.D., P.E. & Susan Gouchoe, Chemical Engineering Dept (UNH), Durham, NH; Austine Frawley, Jean Holbrook & Linda Darveau, U.S. EPA, Boston, MA; & Vincent Perelli, NH Dept. of Environmental Services (NH DES), Concord, NH |
| Modelbased Sludge Reduction in Cleaning & Rinsing Operations, Feb - 1998, K.Q. Luo, Y.H. Yang, J.P. Gong & Y.L. Huang, Department of Chemical Engineering & Materials Science, Wayne State University, Detroit, MI |
| Ontario Metal Finishing & the Environment, Feb - 1998, Andrew MacDonald, Torcad Limited, Toronto, Ontario |
| Assembly Performance of Imidazole-coated Printed Circuit Boards, Jun - 1998, Dr. J. Lee Parker, Viasystems Technologies Corp. |
| Bondable Finishes for Electronics, Jun - 1998, Allan H. Reed & Michael Shechtmann, Technic, Inc. |
| Practical Aspects of the Electroless Nickel/Immersion Gold Process, Jun - 1998, Jim Czaja, The Bureau--Electronics Group |
| Electroless Nickel Controls for Through-hole Plating & Beyond, Jun - 1998, Mike Walsh, Chris Hunrath, Hank Lajoie & Frank Cane |
| New Applications & Production Usages of Immersion White Tin In the Fabrication of Printed Wiring Boards, Jun - 1998, Richard Edgar, Florida CirTech, Inc. |
| A Discussion of Engineering Scale-Up & Beta Testing Of an In-Process Recycling System For Treating Plating Rinsewater for PWB Operations, Jun - 1998, R. P. Renz, T.R. Fritchley, J.J. Sun, E.J. Taylor, C.D. Zhou & P.O. Miller, Faraday Technology, Inc. |
| Pulse Plating of Hard Chromium from a Trivalent Chromium Bath (AESF Research Project 98), Jun - 1998, Y. Song & D.-T. Chin, Department of Chemical Engineering, Clarkson University |
| Correlation Between Leveling Performance & Mechanical Properties of D-C & Pulse-deposited Copper Coatings (AESF Research Project 97), Jun - 1998, Dr. Mois Aroyo & N. Tzonev, Technical University, Department of Chemistry, Sofia, Bulgaria & D. Stoychev, Institute of Physical Chemistry, Bulgarian Academy of Sciences, Sofia, Bulgaria |
| Characterization of Hydrogen Permeation Through Zinc-Nickel Alloys Under Corroding Conditions (AESF Research Project 93), Jun - 1998, A. Krishniyer, M. Ramasubramanian, Dr. R.E. White & Dr. Branko N. Popov, University of South Carolina, Department of Chemical Engineering, Swearingen Engineering Center |
| The Influence of Kinetic & Hydrodynamical Factors On the Structure & Properties of Conversion Coatings (AESF Summer Project, S-56), Jun - 1998, Dr. Mois Aroyo & N. Tzonev, Technical University, Department of Chemistry, Sofia, Bulgaria |
| Computerized Database Studied for the Development Of a New Periodic Table for Electroplaters, Jun - 1998, Dr. Hari Krishna Srivastav, Post Graduate College, Ghazipur, India |
| AESF.org: An Interactive, Member-service-oriented Work in Progress, Jun - 1998, Ted Witt, CEF, American Electroplaters and Surface Finishers Society |
| What the World Wide Web Can Be for Finishing--How E-Commerce, Focused Content & Enhanced Value Can Make a Difference Now, Jun - 1998, Allan J. Sweatt, Products Finishing, Gardner Publications, Cincinnati, OH |
| Your Web Site: Its Content, Audience & Purpose, Jun - 1998, Frederick Travis Stirewalt, Metal-Finishing.COM, PowderCoating.COM, Industry On Line |
| Accessing the Internet--An Important Update, Jun - 1998, George Cushnie, National Metal Finishing Resource Center (NMFRC), http://www.sterc.org |
| Precious Metal Applications in Microelectronics, Jun - 1998, Stewart J. Hemsley, Engelhard--CLAL Singapore, Singapore & K. Shiokawa, N.E. Chemcat (Singapore) Pte. Ltd. |
| A Stable Electroless Palladium Plating System For Electronics Circuit Finishing, Jun - 1998, B.F. Stacy, L.J. Mayer, J.A. Abys, H.K. Straschil & C. Fan, Lucent Technologies |
| Micro-ball Bumping Technology for Flip Chip & TAB Interconnections, Jun - 1998, Dr. Kohei Tatsumi, K. Shimokawa, E. Hashino, Y. Ohzeki, T. Nakamori & M. Tanaka,Nippon Steel Corporation, Advanced Materials & Technology Research Laboratories, Kawasaki, Japan |
| Hydrodynamic Controlled Hull Cell With Linear Current Density Distribution, Jun - 1998, I.V. Kadija, J.A. Abys, J.J. Maisano & G. Holmbom,Lucent Tecnologies, Electroplating Chemicals & Services |
| Plating Engineering & Control in Wafer Manufacturing, Jun - 1998, Wojciech Worwag, Seagate Technology Incorporated, Bloomington, MN |
| Management of the Electroforming Laboratory via Technology & Automation, Jun - 1998, Richard L. Sands, Rs2 Data Systems, Ltd. |
| Evaluation of Copper Electroplated Layers on Silicon Wafers, Jun - 1998, Dr. Seifollah Nasrazadani, Isfahan University of Technology, Dept. Materials Engineering, Isfahan, Islamic Republic of Iran |
| Nickel & Cobalt Alloys as Alternatives For Decorative Hexavalent & Trivalent Chromium Deposits, Jun - 1998, George Shahin, Howard Smith & Dr. Donald Snyder, Atotech USA, Inc. |
| Quartz Crystal Microbalance (QCM) Determination Of Chromium Anodic Dissolution Efficiency in the Sargent Bath, Jun - 1998, Dr. N. V. Mandich, CEF, HBM Electrochemical Company |
| Electrodeposition of Black Nickel Coatings, Jun - 1998, Professor Sergei S. Kruglikov, Dr. Sci., Raissa Novozhilova & Svetlana Kornilova, Mendeleyev University of Chemical Technology, Moscow, Russia |
| Maintenance of Bright Nickel Electrolytes, Jun - 1998, Professor Dr. A. Mšbius, Enthone-OMI Deutschland, Neuss, Germany |
| Nickel-free Plating Technology for Decorative Applications, Jun - 1998, Stewart J. Hemsley, Engelhard--CLAL (Singapore) Pte. Ltd., Singapore & John Sargent, Engelhard--CLAL, UK |
| Increasing the Yields for Bright Chromium Deposits, Jun - 1998, Dr. Helmut Horsthemke, Dip Ing., LPW Chemie GmbH, Neuss, Germany |
| Structured Chromium Layers--Process Technology & Applications, Jun - 1998, T. Bolch, H. Holeczek & M. Metzner, Fraunhofer Institute for Manufacturing Engineering & Automation (IPA), Stuttgart, Germany |
| Thick Chromium Electroplating from Cr(III) Bath, Jun - 1998, Professor V. N. Kudryavtsev, V.W. Kuznetsov, E.G. Vinokurov & M.A. Khachaturov, Mendeleyev University of Chemical Technology, Moscow, Russia & Steve Schachameyer, Eaton Corporation |
| Electroless Deposition of Silver onto Copper Particles, Jun - 1998, Dr. Stojan Djokic, The Westaim Corporation, Fort Saskatchewan, Alberta, Canada |
| The Current State of Composite Electroless Coatings, Jun - 1998, Michael D. Feldstein, Surface Technology, Inc. |
| Stress-corrosion Cracking & Corrosion Prevention With Electroless Nickel Coatings, Jun - 1998, Robert Tracy, Gerald Evarts & Mary Mukhtarian, Occidental Chemical Corporation |
| A New Pitless Plating Technology, Jun - 1998, Michael D. Feldstein, Surface Technology, Inc |
| Real-time Monitoring & Control of Electroless Ni Plating, Jun - 1998, Arthur Wasserman & Richard Smith, Group EP, Inc. |
| A Comparative Study of Crystallization Kinetics & Corrosion Performance of Amorphous Electroless Ni-P Alloys, Jun - 1998, Sanjay Mehta, C. Kerr, A. Vysotskaya & A. Ruffini, OMG Fidelity |
| Influence of Surfactants on the Properties Of a Disperse Electroless Nickel Coating, Jun - 1998, E. Dobreva , H. Petrov & Professor Alexander Lirkov, Technical University, Department of Chemistry, Darvenica, Sofia, Bulgaria |
| Building a Culture That Will Support Your Quality Program, Jun - 1998, Fred Mueller, CEF Pottstown Plating Works, Inc. |
| Are Quality Audits an Oxymoron?, Jun - 1998, Milt Stevenson, Jr. & Mary Walker, Anoplate Corporation |
| An Effective Process Improvement Strategy Utilizing Statistical Techniques For the Small Batch Chemical Manufacturer, Jun - 1998, Jody Paviglionite, CEF, Enthone-OMI Inc |
| Fastener Quality Act: The Three Ws for the Electroplating Community, Jun - 1998, Dr. J. Barton Boodey, RSL Technology Center, Inc. |
| Electrodeposition of Nickel for Microreplication, Jun - 1998, P. Leisner & M. Svensson, Industrial Microelectronics Center, LiTH/IFM, Linkšping, Sweden & D. Billman & M. Read, Toolex Alpha, Sundbyberg, Sweden |
| RRDE & EQCM Study of Copper Electrodeposition, Jun - 1998, Dr. Irina Boguslavsky, Lucent Technologies, Murray Hill, NJ & S. Bruckenstein, State University of New York |
| The Application of Coulometric Reduction in the Testing, Characterization & Quality Control of Metallic Finishes, Jun - 1998, Dr. Simeon J. Krumbein & B. Newell, AMP, Inc. |
| Fabrication of Polymer Thick Film Inks Using Silver-coated Copper Particles, Jun - 1998, Dr. Richard Haynes, Richard Haynes Consultants |
| Computer Modeling of Transport Processes In a Hull Cell & Rotating Electrodes, Jun - 1998, Dr. Kan-Lin Hsueh & Dr. I-yuan Wei, AMP Inc. |
| Metallization of Difficult-to-Plate Plastics, Jun - 1998, Dr. James J. Steppan & Brian McClure, Lockheed Martin Electronics and Missiles |
| Specifications and Standards: An Essential Part of Metal Finishing & Its Operations Today & into the 21st Century, Jun - 1998, Dr. George DiBari, Inco Ltd. |
| Standardization in the Plating Community, Jun - 1998, James Menturweck, Enthone-OMI, Inc |
| What ASTM Standard B 456 & ISO Standard 1456 Teach Us About the Standardization Process & Decorative Electroplated Nickel Plus Chromium Coatings, Jun - 1998, Dr. George A. DiBari, Inco, Ltd. |
| How Standards Affect the Surface Finisher & What You Can Do to Influence Change, Jun - 1998, Fred Mueller, CEF Pottstown Plating Works, Inc. |
| Brush Plating in Production, Jun - 1998, William R. Wachtler, W. R. Associates, Inc. |
| Brush Plating the International Space Station (ISS), Jun - 1998, Art Greenberg, Sifco Selective Plating |
| Zinc-Tin: A Choice for Replacement of Cadmium For Brush Plating Applications, Jun - 1998, Christopher Helwig, Brooktronics Engineering Corporation |
| Hazardous Material Replacements In the Brush Plating Industry, Jun - 1998, David Crocker, Brooktronics Engineering Corporation |
| Preventive Maintenance of Galvanic Plating Equipment, Jun - 1998, Simon Urintsev, Reliable Plating Works, Inc. |
| Digital Controls--The Better Way, Jun - 1998, Peter Cambria, C. Smith & W. Shaughnessy, Rapid Power Technologies |
| A Systematic Approach to the Design, Fabrication & Installation of an Electrochemical Processing Facility Dr. James J. Steppan, Donald Ayotte, Brian McClure, O. Frank Bennett, Ward Gidick & Michael Goeb, Lockheed Martin, Jun - 1998, |
| Turning Quality Improvement into System Improvement, Jun - 1998, Thom Schoonover, The Boeing Company |
| Profiling Plating Baths, Jun - 1998, Craig A. Henry & John Bougneit, JP Tech |
| Chemical Recovery by Use of Crystallization, Jun - 1998, Frank W. Hoffman, Calfran International, Inc. |
| Gold Plating Thickness Distribution, Jun - 1998, J. K. Giri, HMT Watch Colony, Amritur, Nainital - U. P., India |
| Ammonia-free Palladium Nickel Plating Technology, Jun - 1998, Stewart J. Hemsley & Samantha Loh, Engelhard--CLAL (Singapore) Pte. Ltd., Singapore & Brigitte Hervieux, Engelhard-CLAL (Paris), Paris, France |
| Palladium Cobalt--A New Finish for Electronic Applications, Jun - 1998, Dr. Irina Boguslavsky, H.K. Straschil, J.A. Abys, V.T. Eckert & G.F. Breck , Lucent Technologies |
| Materials Properties of Palladium Alloy Electrodeposits, Jun - 1998, Gšran Holmbom, F. Humiec, J.A. Abys, E.J. Kudrak, G.F. Breck & I. Boguslavsky, Lucent Technologies |
| Research & Developments in Lead-free Solder Plating in Japan, Jun - 1998, Professor Tadeo Hayashi, Osaka Prefecture University, Nara-shi, Japan |
| Can Bright Solder be Reflowed?, Jun - 1998, Y. Zhang, K. Murski, J.A. Abys & F. Humiec, Lucent Technologies |
| Hard Anodizing Aluminum--Effects of Sealing & Coloring, Jun - 1998, Dr. Jean Rasmussen, Pioneer Metal Finishing |
| New Insights Regarding the Mechanism Of Spark Anodization Processes, Jun - 1998, Dr. J.M.Runge-Marchese, C. J. Saporito Plating Company |
| Magnesium Anodizing, Jun - 1998, Saba Jakobson, Robert Griffin & Rick Felton, MacDermid, Inc. |
| Titanium Surface Characterization After Etching Rick Wire, Boeing, Jun - 1998, |
| Improved Corrosion Resistance & Paint Adhesion On Aluminum Alloys by Aqueous Surface Processing Using Lithium Bath Chemistries, Jun - 1998, Dr. R. G. Buchheit, The Ohio State University |
| Electrochemical Coatings for Thermal Control of Spacecraft, Jun - 1998, A.K. Sharma, ISRO Satellite Centre, Bangalore, India |
| Minimization of Waste Generation & Treatment Costs In Chromic Acid Plating Applications: A Review of Technologies Past, Present & Future, Jun - 1998, Jay Dwyer, Kinetico, Inc. |
| Phosphating/Chromating Wastewater Recovery at Eaton Corp., Jun - 1998, Christopher T. Riley, P.E. & Penny Skoby, U. S. Filter Recovery Systems, Inc., Roseville, MN & Steven Shachameyer, Eaton Corp / Cutler-Hammer de Puerto Rico Company |
| Designing Health, Safety & Environmental Protection into Systems, Jun - 1998, P. A. Platcow, C.I.H., Sedgwick James of New England, Inc. |
| Electro-coagulation Technology Offers Superior Rinsing for Platers, Jun - 1998, Robert M. Burford, CEF, Pasco |
| Permanent Media Filter Proves Itself In a Competitive Environment in Japan ., Jun - 1998, Charles R. Reichert, CEF-SE & Clemens Trout, SERFILCO, Ltd., Northbrook, IL & Shoichi Suzuki, Sanmei Kasei, Ltd |
| Investigations of Vapor Phase Corrosion Inhibitors in Coatings, Jun - 1998, Cheryl A. Smith, Vapor Phase Products |
| A Comparison of Hot Corrosion Behavior of EB-PVD & Electroplated Pt-Al Coatings on In-738, Jun - 1998, Dr. M. Saremi, M. Ghorbani, S. Seifi & K. Shirvani, Metallurgy Department, Tehran University, Tehran, Iran |
| Nickel Diffusion Coating on Austenitic Stainless Steels & Its Effect on Stress Corrosion Cracking, Jun - 1998, Dr. Bilgehan Ogel, Middle East Technical University, Metallurgy and Materials Engineering Dept., Ankara, Turkey & Isik Atay Sapci, ALMET Metal EndŸstri A.S., Ankara, Turkey |
| Chemical Polishing, Electropolishing & Passivation of Stainless Steel, Jun - 1998, Dr. Xavier Albert Ventura, Laboratory of Electrochemical Research & Development, Integral Centre, Barcelona, Spain |
| Enhancement of Corrosion Resistance of Palladium-electrodeposited Fe-42 wt. % Ni Alloy Lead Frame for Semiconductor Package, Jun - 1998, Joong-Do Kim, Young-Ho Baek, Woo-Suk Choi, Kyoung-Soon Bok, Han-Gyu Kim & Byung-Tae Chun, L/F Team Precision Instruments, Samsung Aerospace Industries, Ltd., Kyungki-Do, Korea |
| Preplated Palladium Lead Frames vs. Spot Selective Silver & Tin-Lead, Jun - 1998, Patrick H. Stafford, Engelhard West, Inc., Anaheim, CA & Steve Burling |
| Wirebonding to Nickel/Palladium Plated Leadframes, Jun - 1998, C. Fan, J.J. Maisano, P. Chiu, A. Blair & J.A. Abys, Lucent Technologies, Murray Hill, NJ & V. Azzano, Precision Plating Company |
| Palladium-plated Lead Frames--Current Technology for Electroplaters, Jun - 1998, A. Blair, J.A. Abys & C. Fan, Lucent Technologies |
| Skipping the Pilot Plant & Moving Straight to Production, Jun - 1998, G. Marczak, Lorin Industries |
| Color Measurement & Computer Shade Matching, Jun - 1998, Tina Gaddy, Clariant Corporation |
| Hard-anodizing Behavior of Aluminum Alloy DTD 5124 Containing Varying Amounts of Impurities Under Different Electrolytic Conditions, Jun - 1998, Dr. A. K. Sharma, H. Bhojraj, H. Narayanamurthy & A.V. Patki, ISRO Satellite Centre, Vimanapura Post, Bangalore, India |
| Interference of Electrolytic Coloration With Transition Metals Deposit: Tin-Nickel-Cobalt, Jun - 1998, Dr. Xavier Albert Ventura, Laboratory of Electrochemical Research and Development, Integral Centre, Barcelona, Spain |
| Elimination of Mud, Toxic Waste & Inert Materials Produced by Surface Treatments By Using Ionic Plasma, Jun - 1998, Dr. Xavier Albert Ventura, Laboratory of Electrochemical Research & Development, Integral Centre, Barcelona, Spain |
| Separation & Recovery of Al & Zn from Galvanized Steels, Using Various Molten Metals, Jun - 1998, Takeo Oki, Dr. Eng, Professor Emeritus, Ryoichi Ichino, Dr. Eng., Nagoya University, Nagoya, Japan & Hideyuki Kanematsu, Dr. Eng., Tetsuo Inoue, Dr. Eng., & Yoshihiko Kunieda, Dr. Eng., Suzuka National College of Technology, Suzuka, Japan |
| How to Size Ion Exchange Systems & Predict Waste Volume, Jun - 1998, Juzer Jangbarwala, Hydromatic, Inc. |
| Reduction of Water Consumption & Quantities of Solid Wastes By Means of Immersed Electrochemical Modules, Jun - 1998, Professor Sergei S. Kruglikov, Dr. Sci., Mendeleyev University of Chemical Technology |
| Pulse Plating of Copper from Acid Solutions, Jun - 1998, Allan H. Reed, Chelsea Edmonds, William Sepp & Kazimierz Wikiel, Technic, Inc. |
| Pulse Plating Development of High Performance Electrodes, Jun - 1998, Michael C. Kimble, Karen Jayne & Everett Anderson, Physical Sciences, Inc. |
| Pulse Electrodeposition-Displacement Reaction Method For Compositionally Modulated Alloys, Jun - 1998, Sudipta Roy, University of Newcastle |
| Pulse Reverse Additive-free Copper Electronics Plating, Jun - 1998, Michael C. Kimble, Alan Woodman & Everett Anderson, Physical Sciences, Inc. |
| Pulse-reverse Plating of Nanocomposite Thin Films, Jun - 1998, E.J. Podlaha, Department of Chemical Engineering, Louisana State University, Baton Rouge, LA & D. Landolt, Swiss Federal Institute |
| Investigation of an Electropolishing Process for Hard Passive Metals, Jun - 1998, J. J. Sun, E. J. Taylor, L. E. Gebhart, C. D. Zhou, R. P. Renz, & J. D. Chromick, Faraday Technology, Inc. |
| Modeling Acid Copper Plating--Influence of Water on Mass Transfer, Jun - 1998, Stephen Koelzer, K & K Consulting, R&D |
| Pulse Anodizing--A Basic Introduction, Jun - 1998, Jean Rasmussen, Pioneer Metal Finishing, R&D |
| Direct Metallization System for Decorative Plating on Plastic, Jun - 1998, Dr. Donald Snyder, Atotech GMF |
| Things that Help in the Plating Shop and Lab, Jun - 1998, Yair Assaf, Bohak Plating Company |
| Electroless Nickel Bath Ensures High-Quality Parts, Feb - 1998, PF editor |
| Regenerative Electroless Nickel Plating Process, Feb - 1998, PF editor |
| Using Carbon and Zeolite For VOC Removal, Feb - 1998, Frank Hussey and Ajay Gupta |
| Tooling-Up the Perfect Finish, Feb - 1998, PF editor |
| Adding an Electrocoating Line Quickly, Mar - 1998, PF editor |
| Adding a Second Electrocoating Line, Mar - 1998, PF editor |
| Partnering is a Three-Way Street, Mar - 1998, PF editor |
| Which Zinc Do You Use?, Mar - 1998, Milt Stevenson, Sr. |
| Anodizing Influences, Mar - 1998, Nathan A. Tiner |
| Increasing Oven Line Speeds, Mar - 1998, PF editor |
| Fasteners and Finishes, Mar - 1998, Thomas S. Doppke |
| Nickel-Chromium Plating In-House, Apr - 1998, Beverly A. Graves |
| Powder Coater Improves Production Capacity, Apr - 1998, PF editor |
| Cleaner Helps Bottom Line, Apr - 1998, Beverly A. Graves |
| Precision Control Equipment, Apr - 1998, PF editor |
| Converting to Powder Coating, Apr - 1998, PF editor |
| Fasteners and Finishes, Apr - 1998, Thomas S. Doppke |
| New Technology for Automotive Trim, May - 1998, Paul T. Colarusso |
| Color Quality of Automotive Finishes Goes High Tech, May - 1998, PF editor |
| Zinc Plater Finds New Market, May - 1998, Steven R. Kline, Jr. |
| Finishing Experiences in Latin America, May - 1998, Jivan Shah |
| Environmental Technology Verification Program, May - 1998, PF editor |
| Fasteners and Finishes, May - 1998, Thomas S. Doppke |
| Environmental Management Systems: A Guide for Metal Finishers, Jun - 1998, Christine Branson and S. Petie Davis |
| Success Story: Spotlight on Kelly AFB, - 1998, Pollution Prevention Source |
| Characterization Study of Conventional Chromium Films, Amorphous Bright Chromium Deposited (ABCD) Films, N+ Implanted ABCD Films and the Preparation of ABCD Films Using Propionic Acid as an Organic Additive., - 1998, Gonzalez, Rene I. |
| Workplace welfare in the electroplating industry , - 1998, Health and Safety Executive |
| Extending Electroless Nickel Bath Life Using Electrodialysis, - 1998, Merit Partnership and Tetra Tech EM, Inc |
| Best Practices for Metal Finishing Line Operators - Workshop Training at Gold Seal, - 1998, Tetra Tech EM, Inc. |
| Environmental Management Systems: A Guide for Metal Finishers, - 1998, Branson, Christine A. and Davis, S. Petie |
| Pollution Prevention Technologies for Metal Finishing Operations, - 1998, Tetra Tech EM, Inc |
| Water Efficiency Manual, - 1998, NC Division of Pollution Prevention and Environmental Assistance |
| Case Studies of Successful Implementations of Aqueous Cleaning Systems, - 1998, Pirrotta, Richard |
| Intelligent Decision Making - What Recycling Methods Will Work Best?, - 1998, Reynolds, Rick |
| Improved Management of Aqueous Cleaning Solutions, - 1998, Mackey, Jim |
| Electroplating, - 1998, World Bank Group |
| Electrycal Systems in the Electroplating Indsutry, - 1998, Health and Safety Executive |
| Pollution Prevention and Abatement Handbook - Electroplating, - 1998, WORLD BANK GROUP |
| Electrical systems in the electroplating industry, - 1998, Health and Safety Executive |
| The 39th William Blum Lecture, The NIST (NBS) Electrochemical Processing (Electrodeposition) Group of Today, - 1998, Christian E. Johnson |
| Modifying Tank Layouts to Improve Process Efficiency, Jan - 1997, The Merit Partnership |
| Successful Use of Pollution Prevention Measures in the Palo Alto Industrial Discharge Ordinance, May - 1997, Thomas S. Barron, PE |
| Analysis of Pollution Prevention Investments Using Total Cost Assessment: A Case Study in the Metal Finishing Industry , Jan - 1997, [no author] |
| EN Specifications: Working Tools for Industry, Jan - 1997, [no author] |
| Do You Know Your Paint's VOC Content?, Jan - 1997, [no author] |
| Chemical Additions Drip by Drip, Jan - 1997, Beverly Graves |
| Why Computerize?, Feb - 1997, By Maureen Fischer |
| Dana Keeps Zinc Plating Under Control, Feb - 1997, Beverly A. Graves |
| A Few Notes on Spray Painting, Feb - 1997, Curt Shay |
| Scrubber Technology: An Update, Feb - 1997, Kenneth C. Hankinson |
| Standards Topics: A Tribute to
Dr. Nathan Feldstein: 1937–1996, Feb - 1997, Allen W. Grobin, Jr. |
| SVC Topics: PVD Processes: Water Vapor, Feb - 1997, Donald M. Mattox |
| Determination of Gold Ion in Gold-Plating Baths, Feb - 1997, By A. Chiba, K. Kobayashi, K. Iki and W.C. Wu |
| Adsorption of Hydrogen Ions
on the Surface of SiC Powder in Solution
of Nickel Sulfate During Composite Coating, Feb - 1997, By Bogdan Szczygie |
| Properties of Nickel-Tungsten Alloys
Electrodeposited from Sulfamate Electrolyte, Feb - 1997, By N. Atanassov, K. Gencheva & M. Bratoeva |
| Inexpensive, Light-Emitting, Diode-Based Photometer
For Determining Copper
In Hard-Chromium Plating Baths, Feb - 1997, By R. Altkorn, R. Haidle, S. Ramamurthy, & X. Zhan |
| Adapting to Customer Needs
Keeps Carolina Plater Growing
Adapting to Customer Needs
Keeps Carolina Plater Growing, Feb - 1997, [no author] |
| Advanced Techniques for Replacing Chromium:
Third Information Exchange, Feb - 1997, Dr. Jim Lindsay, Contributing Technical Editor |
| Advice & Counsel: Cyanide-ATC Headaches, Feb - 1997, Frank Altmayer, CEF |
| Analytically Speaking, Feb - 1997, Dr. Rolf Weil |
| Enviroscope: Michigan's Part 148 Law ‐
Incentives for Self-policing & for Small Business, Feb - 1997, Eugene E. Smary |
| Finishers' Think Tank, Feb - 1997, Marty Borruso |
| Health & Safety: Protecting Your Lab Personnel Against Exposure to Hazardous Chemicals, Feb - 1997, Britt E. Allgood |
| Pretreatment & Organic Finishing: Modern Paint Lines Yield Higher Quality at Less Cost, Feb - 1997, R.W. Phillips Jr. |
| Charlotte Plating Facility
Conquers Zero Discharge Challenge, Feb - 1997, [no author] |
| SVC Topics: PVD Processes: Reactive Cleaning, Mar - 1997, Donald M. Mattox |
| Zeta Potential & Codeposition of PTFE Particles
Suspended in Electroless Nickel Solution, Mar - 1997, By X. Hu, C. Dai, J. Li and D. Wang |
| A Study of SiC/Ni Composite Plating in the Watts Bath, Mar - 1997, By S.H. Yeh & C.C. Wan |
| Corrosion Evaluation of CN & Non-CN Zinc Coatings
Using Electrochemical Polarization, Mar - 1997, By S. Rajendran, S. Bharathi, C. Krishna & T. Vasudevan |
| Metallization of Piezoelectric Ceramic Surfaces, Mar - 1997, By X. Shi, Y. Liu, X. Li, Q. Zheng & J. Fang |
| Powder Coating Commentary: A Message to Suppliers: Let's Not Oversell Powder!, Mar - 1997, David O'Ryan |
| Powder Coating Forum, Mar - 1997, Nicholas P. Liberto, P.E. |
| PVD Chromium
As a Replacement
For Hexavalent Chromium, Mar - 1997, By Dr. Brent Lee |
| Analytically Speaking: Characterization of Deposits, Coatings
& Electroforms ‐ The Use of TEM, Mar - 1997, Dr. Rolf Weil |
| Circuit Technology, Mar - 1997, James P. Langan |
| Finishers' Think Tank, Mar - 1997, Marty Borruso |
| Advice & Counsel: Treating EN Waste, Mar - 1997, Frank Altmayer, CEF |
| Pretreatment & Organic Finishing: Match the Function of the Finish
To Preparation of the Substrate, Mar - 1997, R.W. Phillips Jr. |
| Flexible Equipment & Teamwork
Are a Successful Combination
For Michigan Powder, Mar - 1997, [no author] |
| FORM R Reporting for Nitrate Compounds, Apr - 1997, Joelie Hill |
| Staying Ahead of Demand Keeps This Powder Coating Jobshop Continuously Changing & Expanding , Apr - 1997, [no author] |
| Metal Finishing Strategic Goals Initiative—A Summary*, Apr - 1997, [no author] |
| Advice and Council: SBREFA (and other acronyms), Apr - 1997, Frank Altmayer |
| Analytically Speaking: Characterization of Deposits, Coatings
& Electroforms ‐ Vector Calculations, Apr - 1997, Dr. Rolf Weil |
| Finishers' Think Tank, Apr - 1997, Marty Borruso |
| Health & Safety: OSHA Publishes Final Rule
On Methylene Chloride Standard, Apr - 1997, Vicki P. Sherwood |
| Standards Topics: Spring Meeting of ASTM B08, Apr - 1997, Allen W. Grobin, Jr. |
| SVC Topics: PVD Processes: Process Flow Chart, Apr - 1997, Donald M. Mattox |
| Research Corner: New Projects & Summer Grants, Apr - 1997, Dr. Jim Lindsay |
| Powder Coating Forum, Apr - 1997, Nicholas P. Liberto, P.E. |
| Powder Coating Commentary: Rules to Live By in the Powder World:
From Different Perspectives, Apr - 1997, David O'Ryan |
| Performance Characteristics of Zinc Alloys, Apr - 1997, David Crotty & Robert Griffin |
| A Study of the Effects of Diammonium Citrate
On Electroformed Nickel-Tungsten Alloy, Apr - 1997, Chein-Ho Huang |
| Preliminary Testing of
Perchlorate Cadmium Plating Solutions, Apr - 1997, S. Sriveeraraghavan, R.M. Krishnan, S.R. Natarajan & K. Balakrishnan |
| Preparation of Anisotropic Conductive Particles
By Electroless Plating, Apr - 1997, K. Hagiwara, J. Watanabe & H. Honma |
| Electroforming of Electronic Devices, Jan - 1997, Lubomyr T. Romankiw |
| Specialist Finisher Performs
Selective Metal Plating
For Electronic Connector Terminals, Jan - 1997, [no author] |
| Photoresist Lifting Solved
Using Design of Experiments
Photoresist Lifting Solved
Using Design of Experiments, Jan - 1997, Dr. Richard Mayes & Dr. John Ganjei |
| The Impact of Substrate Roughness on Porosity:
A Comparison of Electroplated Palladium,
Palladium-Nickel & Cobalt Hard Gold, Jan - 1997, E.J. Kudrak, J.A. Abys and F. Humiec |
| Plating of 60/40 Tin/Lead Solder
For Head Termination Metallurgy, Jan - 1997, Saad K. Doss |
| Analytically Speaking: Characterization of Deposits, Coatings
& Electroforms ‐ The Use of Optical Microscopy, Jan - 1997, Dr. Rolf Weil |
| Assessment of Chromium Alternatives , May - 1997, [no author] |
| Accelerated Development and Market Penetration of Very Low VOCs Furniture Coatings , Feb - 1997, [no author] |
| Large Aircraft Robotic Paint Stripping (LARPS, Jan - 1997, [no author] |
| Evaluation of Alternative Paint Stripping Technologies Used in Aircraft and Space Vehicles, Feb - 1997, [no author] |
| Spray Gun Cleaning, Feb - 1997, [no author] |
| Transfer and Use of Powder Coatings Expertise in Civilian Applications, Feb - 1997, [no author] |
| Transfer Efficiency and VOC Emissions of Spray Gun and Coating Technologies in Wood Finishing , Jan - 1997, [no author] |
| Environmental Aspects of Polymer Formations, Jan - 1997, [no author] |
| Enviroscope: Important Legislation for Finishers:
Michigan's Environmental Audit Privilege & Immunity Law (Part 148), Jan - 1997, Eugene E. Smary |
| Finishers' Think Tank, Jan - 1997, Marty Borruso |
| Circuit Technology: Marketing Direct Metallized PWBs, Jan - 1997, James P. Langan |
| Advice & Counsel, Jan - 1997, Frank Altmayer |
| Health & Safety:
Back Injury Prevention, Jan - 1997, Jane Lemke |
| Research Corner: AESF Research Program
Continues To Do Good Work, Jan - 1997, Dr. Jim Lindsay |
| Pretreatment & Organic Finishing: Who is Responsible for Housekeeping?, Jan - 1997, R.W. Phillips Jr. |
| Standards Topics: Controversy Concerning ASTM B 849 & B 850, Jan - 1997, Allen W. Grobin, Jr. |
| SVC Topics: PVD Processes:
Mass Flow Control of Gases, Jan - 1997, Donald M. Mattox |
| MFSA News Digest, Jan - 1997, Richard W. Crain |
| SVC Topics: Vacuum Web (Roll) Coating, May - 1997, Donald M. Mattox |
| Powder Coating Forum, May - 1997, Nicholas P. Liberto, P.E. |
| Powder Coating Forum: Automotive Clearcoat vs.
The Real World, May - 1997, David O'Ryan |
| Hands-on Management, May - 1997, Fred Mueller |
| Chemistry & Theory of Chromium Deposition:
PartI-Chemistry, May - 1997, N.V. Mandich |
| Interference Coloring of Dual-Anodized Films on
Aluminum Containing
Electrolytically Deposited Thin Metal Layers, May - 1997, S. Kawai & M. Yamamuro |
| Characterization of Bright/Semi-bright Nickel Electrolytes
& Corrosion Properties of the
Corresponding Nickel Deposits, May - 1997, W. Dahms, R. Schumacher & J.M. McCaskie |
| Prediction of Thickness Distribution
Of Electrodeposited Coatings
Using a Low-Cost Boundary Element Method, May - 1997, A.F. Averill, U. Nuvoloni, J. Orrin & J. Foster |
| Captive Shop Uses Automation
To Increase Efficiency & Reduce Overhead, May - 1997, [no author] |
| Analytically Speaking: Characterization of Deposits, Coatings
& Electroforms ‐ Methods for In-situ Studies, May - 1997, Dr. Rolf Weil |
| Advice & Counsel: Questions from Platers, May - 1997, Frank Altmayer |
| Enviroscope, May - 1997, Christian Richter |
| Health & Safety: OSHA's Regulatory Agenda, May - 1997, Vicki P. Sherwood |
| Pretreatment & Organic Finishing: Reducing Wastes Can Cut Costs, May - 1997, R.W. Phillips Jr. |
| Reducing Rinse Water Use With Conductivity Controls, Aug - 1997, [no author] |
| Choosing Better Ways to Spray, Mar - 1997, Jerry Poll |
| In-Process Recycling: Myth or Reality?, Mar - 1997, Maria Inman, Robert Renz and Phillip Miller |
| Anatomy of a Conversion, Apr - 1997, Charles Flanagan |
| Cathodic Epoxy Electrocoat For Automotive Radiators, Apr - 1997, Jeffrey J. Oravitz |
| Developments in Aluminum Wheel Plating, Apr - 1997, Howard Smith and
Dr. Donald Snyder |
| A Blasting Challenge, Apr - 1997, The Products Finishing Staff |
| Drag Finishing, May - 1997, David Chmielewski |
| Low-VOC Primers for the Finishing Industry, May - 1997, Leon Ewalt |
| Industrial Finishing Technology Program, May - 1997, Beverly A. Graves |
| Never-Dump Cleaner, Jun - 1997, Beverly A. Graves |
| Alternative Processes to Methylene Chloride, Jun - 1997, Robert Pauli |
| Powder Coating Advantages, Jun - 1997, Greg Bocchi |
| Gold Plating, Jul - 1997, Alfred M. Weisberg |
| Thermal Oxidation for
Air Emissions, Jul - 1997, Steve Medvetz and Frank Lobb |
| Regenerative Thermal
Oxidation at a Job Shop, Jul - 1997, [no author] |
| Controlling VOC Emissions
in Finishing Operations, Jul - 1997, James Stone |
| Chromium Emission System Beats EPA
Specs, Aug - 1997, [no author] |
| Replacing a Solvent Degreaser, Aug - 1997, Stephen Hopkins |
| Electrocoat: The Next Step, Aug - 1997, Cindy J. Goodridge |
| Second Generation Aqueous Cleaning: an Update in Conventional Wisdom, Aug - 1997, [no author] |
| PRINTED WIRING BOARD CASE STUDY 1: Pollution Prevention Work Practices, - 1997, [no author] |
| PRINTED WIRING BOARD CASE STUDY 2: On-Site Etchant Regeneration, - 1997, [no author] |
| PRINTED WIRING BOARD CASE STUDY 3: Opportunities for Acid Recovery and Management, - 1997, [no author] |
| PRINTED WIRING BOARD CASE STUDY 4: Plasma Desmear: A Case Study, - 1997, [no author] |
| PRINTED WIRING BOARD CASE STUDY 5: A Continuous-Flow System for Reusing Microetchant, - 1997, [no author] |
| PRINTED WIRING BOARD CASE STUDY 6: Pollution Prevention Beyond Regulated Materials, - 1997, [no author] |
| PRINTED WIRING BOARD CASE STUDY 7: Identifying Objectives for Your
Environmental Management Systems aterials, - 1997, [no author] |
| PRINTED WIRING BOARD CASE STUDY 8: Building an Environmental Management System: H-R Industries' Experience, - 1997, [no author] |
| Resist Strip Filtration [ComplianceNet], Jan - 1997, [no author] |
| Cupric Chloride Etchant (Regeneration Safety) [ComplianceNet], Oct - 1997, [no author] |
| Simultaneous Multiple Metal Analysis of Industrial Wastewaters, Jan - 1997, Eric C. Stortz, C.D. Zhou, T.M. Sousa, R.P. Renz & E.J. Taylor |
| Functional Chromium Plating from a Trivalent Chromium Bath, Jan - 1997, Robert P. Renz, C.D. Zhou, E.J. Taylor, E.C. Stortz & B.G. Grant |
| Alternative Paint Strippers to Methylene Chloride, Jan - 1997, Walter Young, P.E., Keith Cramer, Daley Speer & Steven Guthrie |
| Applications for Cr Plating Alternatives: Repair Technology & OEM Coatings, Jan - 1997, K.O. Legg, M.E. Graham & T. Bernecki |
| Environmental Gains in High-speed Chromium Plating from Chromium (III) Electrolytes Using Advanced Process Technology, Jan - 1997, M. El-Sharif |
| Case Study: Zero Discharge—General Electric, Selmer, TN Plant, Jan - 1997, Stephen Perrone |
| Environmentally Friendly Conversion Treatment for Electrodeposited Zinc Coatings, Jan - 1997, M. El-Sharif |
| Production Testing of Aqueous Systems, Jan - 1997, Richard D. Pirrotta |
| Environmental Milestones & Frontiers For Electroplaters & Surface Finishers, Jan - 1997, Laura Wally |
| Recycling Wastewater Treatment Sludges from Electroplating Operations, F006, Jan - 1997, Paul A. Borst |
| A Layman's Guide to Risk & Hazard Assessment, Jan - 1997, Britt Allgood |
| Controlling Carbonate Buildup in Alkaline & Cyanide-based Plating Solutions through Continuous On-line Crystallization, Jan - 1997, Peter Golisch |
| Go Directly to Jail, Jan - 1997, William L. Penny |
| Technologies for the Recovery, Separation & Elimination of Complexing Agents in Metal & Surface Finishing Industries, Jan - 1997, Dr. Fred P. Reinhard |
| Closed-loop Operations in Stripping Processes in Electroplating Facilities, Jan - 1997, Dr. A. Moebius |
| A Review of Acid Recycling With Diffusion Dialysis: Applications Update, Jan - 1997, Daniel E. Bailey |
| In-process Recycling of Plating Wastewater with a Novel Electrochange Recovery System, Jan - 1997, C.D. Zhou, E.J. Taylor, E.C. Stortz, R.P. Renz & J.J. Sun |
| Removing Oils from Soak Cleaners & Cleaner Rinses Using Lipophilic Filter Media: Case Studies, Jan - 1997, H.M. Dexter, Jr. & Hal M. Dexter, III, Fred Mueller, Tom F. Rash |
| Anodizing Acid Purification Using Resin Sorption Technology at Pioneer Metal Finishing, Jan - 1997, Paul Pajunen, P.E., Jim Harrison |
| Report on Observed Differences in Dynes/Centimeter Readings of Various Chromium MACT Method 306B Surface Tension Measuring Devices, Jan - 1997, James E. Hensley, David Yo |
| Preparing a Risk Management Plan Under the Accidental Release Prevention Regulations, Jan - 1997, Michael C. Schum |
| Compliance with the Aerospace NESHAP ‐ Summary of Requirements for Affected Sources & the Impact of the Draft Supplement & Draft Control Techniques Guideline, Jan - 1997, W.B. Evans & S. Chandran |
| Environmental Economics in the Aerospace Industry, Jan - 1997, Darin G. Childers |
| The Stanley Work's Corporate Program for Metal Finishing Improvements, Jan - 1997, Kevin Vidmar |
| Pollution Prevention Assistance from Chemical Suppliers? Innovative Supplier Relationships & the Metal Finishing Industry, Jan - 1997, Thomas J. Bierma, PhD, & Francis L. Waterstraat |
| Implementing ISO 14001: A Discussion of Options, Jan - 1997, Gayle Woodside, Bonnie Blam, & Patrick Aurrichio |
| A Look Inside Metal Finishing Scrubbers, Jan - 1997, Christopher A. Baxter |
| Assessment of Atmospheric Evaporation for Resource Recycle at Aerospace Metal Finishing, Jan - 1997, M. Uetz |
| Modifications to Existing Chrome Scrubbers and Separators for Compliance to the EPA Requirements, Jan - 1997, Thomas O'Connor & Joseph Poweziak |
| Noise and Hearing Conservation Review, Jan - 1997, Philip A. Platcow |
| Protecting Workers' Hands, Jan - 1997, Vicki P. Sherwood |
| Medical Surveillance in the Workplace, Jan - 1997, Jane Lemke, RN |
| Inert Anode for Chloride Zinc Plating, Jan - 1997, Wayne Roberts |
| Powder Coating Forum, Jun - 1997, Nicholas P. Liberto |
| Powder Coating Commentary, Jun - 1997, David O'Ryan |
| Primer Coating System for Electroless Nickel Plating
of Non-Metallic Surfaces, Jun - 1997, C.E. Baumgartner & K.D. de Jager |
| Chemistry & Theory of Chromium Deposition:
Part II—Theory of Deposition, Jun - 1997, N.V. Mandich |
| Business Soars for Pacific
Northwest Finisher, Jun - 1997, [no author] |
| Analytically Speaking: Characterization of Deposits, Coatings
& Electroforms ‐ Methods of Surface Analysis, Jun - 1997, Dr. Rolf Weil |
| Advice & Counsel: An Environmental Assessment—
What Are They Looking For?, Jun - 1997, Frank Altmayer, CEF |
| Finishers' Think Tank, Jun - 1997, Marty Borruso |
| Health & Safety: OSHA Compliance Visit, Jun - 1997, Todd S. Baldwin |
| Hands-on Management: Using the Pareto Chart, Jun - 1997, Fred Mueller, CEF |
| Pretreatment & Organic Finishing: Trying New Technology
Keeps Paint Shop Growing, Jun - 1997, R.W. Phillips Jr. |
| Standards Topics: The "Right" Question, Jun - 1997, Allen W. Grobin, Jr., |
| SVC Topics: Broad-beam Reactive
Plasma Sources—DC Sources, Jun - 1997, Donald M. Mattox |
| Properties of Ni-WC Electrocomposites, Jun - 1997, M. Pushpavanam, S.R. Natarajan & K. Balakrishnan |
| Repair of Metal Coatings Using Environmentally
Compliant Brush Plating Solutions, Jul - 1997, K.R.Baldwin & C.J.E.Smith |
| Advice & Counsel: Can Process Automation Replace the Chemist?, Jul - 1997, Frank Altmayer |
| Circuit Technology: Trends in PWB Construction, Jul - 1997, James P. Langan |
| Enviroscope: Chromium NESHAP—Where are We Now?, Jul - 1997, Tim Denhof |
| Hands-on Management: Quality: An Industry-wide Concern, Jul - 1997, Fred Mueller, CEF |
| Pretreatment & Organic Finishing: Responsibility is Everyone's Job, Jul - 1997, R.W. Phillips Jr. |
| Health & Safety: OSHA's Voluntary Protection Programs, Jul - 1997, Martha S. Martin |
| Analytically Speaking: X-ray Photoelectron Spectroscopy, Jul - 1997, Dr. Rolf Weil |
| Continuous Coil Metal Finishing:
Avoiding Problems Before They Start, Jul - 1997, Paul B. Schultz |
| Electrochemical Porosity Measurement of Electroless
Nickel Coatings on Ferrous Substrates
Information resulting from AESF Research Project, Jul - 1997, L. Das, D-T. Chin, G.L. Evarts & R.L. Zeller III |
| Study of HCD Electroplating
By Phenolsulfonic Acid Baths, Jul - 1997, S. Hirano, Y. Oyagi & T. Izaki |
| Standards Topics: The 1997 ISO/TC 107 Meetings, Jul - 1997, Allen W. Grobin, Jr. |
| SVC Topics: PVD Processes:
Patents & Copyrights, Jul - 1997, Donald M. Mattox |
| Powder Coating Forum, Jul - 1997, Nicholas P. Liberto |
| Powder Coating Commentary:
Rules to Live By in the Powder World:
A Final Perspective, Jul - 1997, David O'Ryan |
| Effect of Triethanolamine Addition on Sealing Time, Jul - 1997, J.A. González, E. Otero, A. Bautista & V. López |
| Airborne Lead Concentrations [ComplianceNet], Oct - 1997, [no author] |
| California Air Board's list of toxic chemicals used by PWB Man. [ComplianceNet], Oct - 1997, [no author] |
| Copper Recycling (from scrap PWBs) [ComplianceNet], Jun - 1997, [no author] |
| Delisting F006 Waste [ComplianceNet], Jul - 1997, [no author] |
| DTC/Carbon Disulfide Generation [ComplianceNet], Jan - 1997, [no author] |
| Electrowinning Units [ComplianceNet], Jan - 1997, [no author] |
| EPA excludes shredded PWBs from RCRA definition of solid waste [ComplianceNet], May - 1997, [no author] |
| Establishment of a management program for specified lead wastes [ComplianceNet], Jan - 1997, [no author] |
| Innovative Environmental Regulations: An Environmental Partnership: The Sigma
Circuits Experience, June - 1997, John Mukhar, Brian Thomas |
| Top Ten Environmental Regulatory Issues Facing PWB Manufacturers, June - 1997, Lucille
Servidio. Linda Swift |
| Wastewater Recycling and Copper Recovery at a California PCB Shop, May - 1997, David Chew and Jessie Nelson |
| Application of Precision Filtration to an Electroless Copper Plating Bath, Aug - 1997, T. Fujinami & H. Honma |
| The Influence of Pulse Frequency on the Hardness Of Bright Copper Electrodeposits, Aug - 1997, D.S. Stoychev & M.S. Aroyo |
| Control of Thickness of Corrosion-Resistant Zn-Fe, Zn-Co & Zn-Ni Coatings, Aug - 1997, G. Bikulcius |
| Optimizing Palladium Conversion in Electroless Palladium Plating of Alumina Membranes, Aug - 1997, J.N. Keuler, L. Lorenzen, R.N. Sanderson & V. Linkov |
| The Systems View in Automotive Finishes-Essential,But Overlooked, Sep - 1997, Dr. James H. Lindsay |
| Plating Shop Overcomes Disaster; Emerges With New Direction & Future, Sep - 1997, No Author |
| The Evaluation of Tungsten Carbide Thermal Spray Coatings as Replacements for ElectrodepositedChrome Plating on Aircraft Landing Gear, Sep - 1997, B.E. Bodger, R.T.R. McGrann & D.A. Somerville |
| Team of U.S. & U.K. Suppliers Assists Hardware Manufacturer In Establishing E-coat Line, Oct - 1997, Stewart Hildred |
| Custom Design Extends Operating Range Of Regenerative Thermal Oxidizer, Oct - 1997, No Author |
| Designing an Anodizing Facility, Oct - 1997, No Author |
| Choice of Sensor for PC Board Through-Hole Deposit Control in Electroless Copper Plating, Oct - 1997, G. Bikulcius, M. Salkauskas, V. Pelanis & K. Zukauskas |
| Electrodeposition of Zinc-Cobalt Alloy From Cyanide-Free Alkaline Plating Bath, Oct - 1997, S. Rajendran, S. Bharathi, C. Krishna & T. Vasudevan |
| Gas Plasma--A Dry Process For Cleaning & Surface Treatment, Nov - 1997, Lou Rigali |
| California's Rule 1122 On VOCs from Cleaners Could Be a Model for the Nation, Nov - 1997, No Author |
| Affordable, Laser-assisted Chip Cleaning Is Effective, Saves Water, Pollutes Less, Nov - 1997, No Author |
| Finishers Can Save Money With Help from Power Companies, Nov - 1997, No Author |
| Analytically Speaking: Characterization of Deposits, Coatings & Electroforms, Nov - 1997, Dr. Rolf Weil |
| Advice and Council: Legal Troubles, Nov - 1997, Frank Altmayer |
| Circuit Technology: High-density Interconnection (HDI), Nov - 1997, James P. Langan |
| Health and Safety: OSHA Establishment Search, Nov - 1997, Martha S. Martin |
| Finishers' Think Tank, Nov - 1997, Marty Borruso |
| Powder Coating Commentary: Preparation for Powder Painting: A Systemic Perspective, Nov - 1997, David O'Ryan |
| SVC Topics: PVD Processes: Cleaning Lines, Nov - 1997, Donald M. Mattox |
| Electrolytic Codeposition of Palladium & Nickel in an Ammonia Bath, Nov - 1997, Z. Ratajewicz & C. Saneluta |
| Dynamic Modeling & Simulation for Environmentally Benign Cleaning & Rinsing, Nov - 1997, J.P. Gong, K.Q. Luo, and Y.L. Huang |
| Investigation of Electroless Ni-P-SiC Composite Coatings, Nov - 1997, Yongjun Li |
| Electroforming is for Everyone, Dec - 1997, Ron Parkinson |
| From Jewelry to Eyeglass Frames, Accessories Set Trends in Decorative Finishing, Nov - 1997, Michael A. Akkaoui |
| Unusual Electrofroming Accomplishments, Dec - 1997, Dr. George DiBari & Jack Dini |
| Electrofroming Course & Symposium Feature Latest Advancements, Dec - 1997, Dr. James H. Lindsay |
| Electricity Restructuring: A Cost-saving Strategy for Metal Finishers, Dec - 1997, Kenneth J. Saulter, Ph.D, Carey W. Jones & Laura R. Rubin |
| Circuit Technology: Advice and Council: The Fugitive(s), Dec - 1997, Frank Altmayer |
| Immersion Tin--A Low-cost Alternative to HASL, Dec - 1997, James P. Langan |
| Trends in the Finishing Industry, Dec - 1997, David O'Ryan |
| Materials Characterization of a Non-Cyanide Silver Electrodeposit, Dec - 1997, J.W. Dini, R.J. Morrissey & D.R. Pacheco |
| Study of the Process & Mechanism of Plating Directly on Titanium and Its Alloys, Dec - 1997, Z. Yang, M. An, J. Zhang, Z. Tu and M. Li |
| Electrochemical Effects in Electroplated
Electronics Devices, Nov - 1997, S.K. Jalota & K.D. Orphanides |
| Hands-On Management: Quality--Giving Customers What They Want, Dec - 1997, Fred Mueller, CEF |
| EPA Chief Browner & U.S. Senators
Praise Metal Finishers At National Press Event For Work in Common Sense Initiative, Dec - 1997, [no author] |
| Enviroscope: It's Raining Again ..., Dec - 1997, Britt Allgood |
| Hands-On Management: Keep a Full Tank of Gas in Your Car
& Traveler's Checks in Your Wallet ... Just in Case, Nov - 1997, Fred Mueller, CEF |
| Coil Powder Coating, Sep - 1997, Beverly Graves |
| Trends in Fastener Finishing, Sep - 1997, Jerry Poll |
| Zinc Plater Bucks Tradition, Sep - 1997, [no author] |
| Plating Development with Pourbaix Diagrams, Jun - 1997, Wm. Gene Calvert, CEF & Dr. Burt Shah, Boeing Commercial Airplane Group, Wichita, KS |
| Study on the Chemical Polishing Stainless Steel, Jun - 1997, Professor Fang Jing Li & Han Ke Ping, Gul Technologies Singapore PTE LTD, Singapore |
| Pulsed Electrodeposition of Rough Copper Coatings, Jun - 1997, Professor Sergei S. Kruglikov, Dr. Sci., Dr. Michael M. Yarlykov & Lyudmila M. Velesevich, Mendeleyev University of Chemical Technology, Moscow, Russia |
| Evaluation of Phosphatability of Steels by an Impedance Technique, Jun - 1997, Jeong-Real Park, Pohang Iron and Steel Company, Ltd., Chonnam, Republic of Korea |
| A Proposed Investigation into Aerosol Formation at the Surface of Open Tanks, Jun - 1997, Dennis R. Hanlon & Adam Chmielewski, KCH Services, Inc., Forest City, NC & David Hahn, Sandia National Laboratories, Livermore, CA |
| Technical Description and Practical Guide for Evaluation of Wet NOx Abatement Systems, Jun - 1997, Michael Sprague, Duall Division, MetPro Corporation, Owosso, MI |
| High Speed Ni-W Alloy Electroforming, Jun - 1997, Professor Chein-Ho Huang, Soochow University, Shih-Lin, Taipei, Taiwan |
| Electrodeposition of Fe-Ni-P Alloys for Wear Resistance, Jun - 1997, Professor Hetong Guo, Shulan Liu & Hui Liang, Tianjin University, Tianjin, Peoples Republic of China |
| The Preparation of Ni-S Alloy by Electroplating Method, Jun - 1997, Professor Ruifang Zhuang & Ligong Jing, Nanjing University, Nanjing, Peoples Republic of China |
| Ecologically Safe Brightener Composition for Tin-Based Alloy Plating, Jun - 1997, Professor Andrei N. Popov, I. Kuzmina & Dmitrii Kotelnikov, Mendeleyev University of Chemical Technology of Russia, Moscow, Russia |
| Preliminary Evaluation & Comparison of Al Coatings Provided by Electroplating & Ion Vapor Deposition Processes on Steel Substrates, Jun - 1997, Keith Cramer, J. Peter Ault, P.E. & Christopher Hartline, Ocean City Research Corp., Ocean City, NJ |
| Electrochemical Surface Treatment of Stainless Steels, Jun - 1997, Dr. Rustem A. Kaidrikov & Professor Boris L. Juravlev, Kazan State Technological University, Kazan, Russian Federation |
| On the Kinetics of Chromium Electroreduction from Cr(III) Electrolyte, Jun - 1997, Professor V. N. Kudryavtsev, E. G. Vinkurov & V. V. Kuzentsov, Mendeleyev University of Chemical Technology of Russia, Moscow, Russia, & S. R. Schachamayer, Eaton Corporation, Milwaukee, WI |
| Acceleration Mechanism of Thiourea for Electroless Nickel Deposition, Jun - 1997, Professor Fang Jing Li, Wu Yong & Han Ke-Ping, Gul Technologies Singapore PTE LTD, Singapore |
| EN Plating: Abrasive Wear Resistance & Microhardness as a Function of Heat-Treatment, Jun - 1997, J. Harrison & J. Rasmussen, Pioneer Metal Finishing, Green Bay, WI |
| The Effect of Phosphorus Distribution in Copper Anodes Upon Anode Sludging & Current Efficiency in Acid Copper Plating, Jun - 1997, Richard W. Strachan, CEF-SE |
| Utilizing Lead Assessor Training to Facilitate ISO 9000 Certification, Jun - 1997, Fred Mueller, CEF, Pottstown Plating Works, Inc., Pottstown, PA |
| Principle of Operation and Maintenance of Composite Mesh Pad (CMP) Chrome Mist Eliminators, Jun - 1997, Ted Fattal and Dave DeLisle, Duall Division, MetPro Corporation, Owosso, MI |
| Throwing & Covering Power Evaluations of a Tin Electroplating Chemistry by Hydrodynamically Controlled Rotating Cylinder Throwing Power Electrodes and Hull Cells, Jun - 1997, Y. Zhang, F. Humiec, K. Murski, I. Kadija & J. A. Abys, Lucent Technologies, Murray Hill, NJ |
| Uncertainty Estimation in Layer Thickness Analysis by XRF & Optical Cross Section, Jun - 1997, Glenn E. Staudt, AMP Inc., Harrisburg, PA |
| Control of Electroforming Solutions by Stripping Voltammetry, Jun - 1997, P. Bratin, G. Chalyt & M. Pavlov, ECI Technology, East Rutherford, NJ |
| Low-Boron Electroless Nickel Plated Through-hole Process for Printed & Flexible Circuit Application: Advancements in Quality, Production & Reliability, Jun - 1997, Dr. Saad Doss & Hiroyuki Ikeda, Mektec, Milpitas, CA & Frank Cane, Fidelity Chemical Products Corporation, Newark, NJ |
| Electroless Copper Metallization on Ceramic Circuit Substrates, Jun - 1997, Xia Chuan Yi, Senior Engineer, The 13th Research Institute of the Ministry of Electronics Industry, HeBei, Peoples Republic of China |
| Using CAsting for Surface Treatment (CAST) on an Al-Mg Alloy, Jun - 1997, Anne Deacon Juhl, M. Sci., Technical University of Denmark, Lyngby, Denmark |
| Aluminum Wire Enameling: A New Surface Preparation, Jun - 1997, J. S.. Safrany & G. Colombier, Pechiney CRV, Voreppe, France, & G. Golombler & B. Loreau, Aluminum Pechiney, Paris, France |
| Metal Quality & Finishing, Jun - 1997, Richard W. Mahn, Henkel Surface Technologies, Atlanta, GA |
| Solution Agitation in Type II & III Anodizing, Jun - 1997, Donald G. W. Ytterberg, Swiss Lenox, Inc., Arvada, CO |
| Additives & Type III Anodizing: Fact or Fiction, Jun - 1997, Dr. Jean Rasmussen, Pioneer Metal Finishing, Green Bay, WI |
| New Electrolytic Two-Step Coloring Process, Jun - 1997, Chris Hanthorn, Henkel Surface Technologies, Atlanta, GA |
| Seal Performance Standards & Specifications for Anodized Aluminum, Jun - 1997, Anthony Ita, Henkel Surface Technologies, Atlanta, GA |
| Microbump Formation on Aluminum Substrate, Jun - 1997, Takeshi Kobayashi, Hideto Watanabe & Hideo Honma, Kanto Gakuin University, Kanagawa, Japan |
| Non-Chromium Conversion Coating Technologies for Aluminum Alloys, Jun - 1997, Shawn E. Dolan & Lawrence R. Carlson, CEF, Henkel Surface Technologies, Madison Heights, MI |
| Chemical Recovery Systems for the Aluminum Anodizer, Jun - 1997, Paul Pajunen, P. Eng., Eco-Tec Inc., Pickering, Ontario, Canada |
| Nickel is Class, Jun - 1997, Ralph V. Dixon, MacDermid, Inc., Waterbury, CT |
| New Developments in Aluminum Anodizing Methods- Hard Anodizing and Integral Color-Electrocoloring, Jun - 1997, Dr. Xavier Albert Ventura, Laboratory of Electrochemical R&D, Integral Centre of Barcelona Spain |
| Surface Finish Requirements for Advanced Bonding Techniques, Jun - 1997, James P. Langan, Langan Associates, Red Bank, NJ |
| Applications of Electroless & Electrolytic Palladium in PWB Manufacturing, Jun - 1997, B.F. Stacy, J.A. Abys, L.J. Mayer, C.Fan, I.V. Kadija & H.K. Straschil, Lucent Technologies, Murray Hill, NJ |
| Surface Evaluation of the Silver Finishes via Sequential Electrochemical Reduction Analysis, Jun - 1997, P. Bratin, M. Pavlov & G. Chalyt, ECI Technology, East Rutherford, NJ |
| Ductile Nickel/Palladium Multilayer Surface Finishes Designed for Leadframe Packaging, Jun - 1997, Dr. Chonglun Fan, V. Kadija, J. A. Abys & J. J. Maisano, Lucent Technologies , Murray Hill, NJ |
| Achieving Zero Discharge Using an Improved Ion Exchange Process, Jun - 1997, Juzer Jangbarwala, Hydromatix, Inc., Chino, CA |
| Automated Waste Treatment, 1989-1996, Jun - 1997, Stephen Koelzer, K & K Products, Sunnyvale, CA |
| Technical & Economic Aspects of Electrochemical Regeneration of Zinc Chromating Solutions, Jun - 1997, Professor Sergei S. Kruglikov, Dr. Sci., Mendeleyev University of Chemical Technology, Moscow, Russia, & Dr. Vasili V. Okulov, AVTOVAZ, Togliatti, Russia |
| Process Water Recycling at Hughes Missile Systems Company, Jun - 1997, Paul W. Fecsik & Mark Orton, Hughes Missile Systems Company, Tucson, AZ |
| Electrolytic Capture & Recycle of Ni & Zn from Plating Waste, Jun - 1997, David H. Swenson, Bruce Hart, Michelle Vogtmann,Albert Plausch, George W. Eastland, Jr., Kevin Wiese & Tom Vivian, Saginaw Valley State University, MI; & Kevin T. Jungquist, Tawas Plating & Powder Coating Company |
| Efficient Cost Management Through Chemical Conservation/Waste Minimization for the Electroplating Industry, Jun - 1997, Paul G. Page, P.E., TolTest Inc., Plymouth, MI |
| Legislation for the European Community on Waste Characteristics: Lixiviation Tests for Electroplating Muds, Jun - 1997, Dr. Xavier Albert Ventura, Integral Centre of Barcelona Spain, Barcelona, Spain |
| The Trend Toward Pd/Ni Contacts in High Density Interconnects, Jun - 1997, Lawson Williams, Ranoda Electronics, Inc., Miami, FL |
| Extended Thermal Aging of Precious Metal Finishes Used in Automotive Connectors, Jun - 1997, Gerald R. English & Therese R. Souza, Handy & Harman, North Attleboro, MA & Tom Cairns, Ford Motor Co., Dearborn, MI |
| Palladium-Nickel Electrodeposits-Properties & Selection, Jun - 1997, M.P. Toben, J.L. Martin & R.A. Russo, LeaRonal, Inc., Freeport, NY |
| New Pd/Ni Plating Bath: Chemically Benign & Environmentally Friendly, Jun - 1997, Irina Boguslavsky, J. A. Abys, H. Straschil, H. Tsuruta, J. J. Maisano & V. Eckert, Lucent Technologies, Murray Hill, NJ |
| Rectifier Advancements-Switch-mode Power Supplies, Jun - 1997, Peter Cambria, Rapid Power Technologies, Inc., Brookfield, CT |
| Corrosion in Electronics-A Historical Perspective, Jun - 1997, Richard G. Baker, CEF-SE, Baker Consultants, Inc., Winter Springs, FL |
| Properties of Electroless Nickel Deposits: Specifying & Measuring Problems, Jun - 1997, Jack Horner, Milford, MI, & Brad Durkin, MacDermid |
| Corrosion Control for Metallized MCMs & Hybrid Circuits, Jun - 1997, Donald W. Baudrand, Consultant for MacDermid, Inc., Waterbury, CT |
| Enhanced Solderability of PWB Substrates with Improved Organic Solderability Preservatives (OSP), Jun - 1997, Michael Carano, Electrochemicals, Inc., Maple Plain, MN |
| Processing Considerations on Providing Corrosion Protection for Gold-flashed Electrical Contacts, Jun - 1997, Dr. Henry Law, Lucent Technologies, Inc., Murray Hill, NJ & Edward S. Sproles, Lucent Technologies, Inc., Princeton, NJ |
| Electroplating of Zn-Ni & Zn-Ni-SiO2 Thin-film Composites onto Steel for Prevention of Corrosion & Hydrogen Embrittlement, Jun - 1997, B.N. Popov, M. Ramasubramanian, D.H. Coleman & R.E. White, Dept. of Chemical Engineering, University of South Carolina, Columbia, SC & K.S. Chen, Sandia National Laboratories, Albuquerque, NM |
| Electrochemical Porosity Measurement of Electroless Nickel Coatings on Ferrous Substrates, Jun - 1997, Leena Das & Prof. Der-Tau Chin, Dept. of Chemical Engineering, Clarkson University, Postdam, NY & Gerald Evarts, CEF & Robert Zeller, III, Occidental Chemical Corporation, Grand Island, NY |
| Equilibrium Characteristics of Tartrate & EDTA-based Electroless Copper Deposition, Jun - 1997, M. Ramasubramanian, B.N. Popov & R.E. White, Dept. of Chemical Engineering, University of South Carolina, Columbia, SC & K.S. Chen, Sandia National Laboratories, Albuquerque, NM |
| A Model of Copper Electrodeposition from Cyanide Electrolyte, Part II-Current Distribution on a Disk Electrode (AESF Research Project #91), Jun - 1997, David A. Dudek & Professor Peter S. Fedkiw, Department of Chemical Engineering, North Carolina State University, Raleigh, NC |
| Leveling Performance of Bright D-C or Pulse-Electrodeposited Coatings as a Criterion of the Property Estimation (AESF Research Project 97), Jun - 1997, Dr. Mois Aroyo & N. Tzonev, Technical University, Department of Chemistry, Sofia, Bulgaria |
| Codeposition of Copper & Tin from Sulfate Solutions Involving Surface-Active Substances, Jun - 1997, Dr. Professor Arvydas Survila, Dr. Zenius Mockus & Dr. Ona Galdikiene (now deceased), Institute of Chemistry, Vilnius, Lithuania |
| Process Optimization & Pollution Prevention via OP2EP-Advisor (AESF Research Project #96), Jun - 1997, J.P. Gong, K.Q. Luo & Prof. Yinlun Huang, Wayne State University, Detroit, MI |
| Mathematical Evaluation of the Influence of Major Process Parameters on the Current Distribution in Barrel Plating, Jun - 1997, Ilia Andreev & Ganna Megevich, Kazan State Technological University, Kazan, Russian Federation |
| Elimination of Solution Growth in Chloride Zinc Solutions, Jun - 1997, Richard Painter, Pavco, Inc., Cleveland, OH |
| Change in Surface Color of the Chromated Film Under High Humidity Environment, Jun - 1997, Y.K. Song & H.J. Kim, Pohang Iron & Steel Co., Ltd., Korea |
| The Role of Lubricant for Lubricant-Coated Steel Sheet, Jun - 1997, Chan-Sup Park, Y.G. Jung & Joon-Hyung Jo, Pohang Iron and Steel Company, Pohang, Korea |
| A New Alkaline Zinc-Nickel Electrolyte, Jun - 1997, Victor G. Roev & R. A. Kaidrikov, Kazan State Technological University, Kazan, Russian Federation |
| Corrosion of Zn in Chromating Solution: The Composition Model of Diffusion Layer, Jun - 1997, Professor R. Sarmaitis, A. Survila, Dr. V. Dikinis, Dr. V. Rezaite, Institute of Chemistry, Vilnius, Lithuania |
| Non-cyanide Alkaline Zinc Enters a New Era, Jun - 1997, Keith Zone, Enthone-OMI, Inc., European Technology Centre, The Netherlands |
| High Thiosulfate-An Unwelcome Member in Al Chemical Milling Baths, Jun - 1997, T.D. Brown & L.E. Bruce, McDonnell Douglas, Long Beach, CA |
| Effect of Sulfur Compounds on Surface Roughness from Aluminum Chemical Mill Etch Tanks, Jun - 1997, Thomas Foulds, Boeing Commercial Airplane Group, Seattle, WA |
| Membrane Systems for Recycling of Sodium Hydroxide & Recovery of all from Aluminum Milling Baths, Jun - 1997, Mark Jaffari, Malek, Inc., San Diego, CA |
| Comparison of Chemical Maintenance Methods for Nitric/HF Milling Solutions, Jun - 1997, Dr. Thomas Hanlon, United Technologies Research Center, East Hartford, CT & Peter Johnson, Sikorsky Aircraft, Stratford, CT |
| Quality Improvement of the Chemical Milling Process, Jun - 1997, Bruce Griffin, McDonnell Douglas, St. Louis, MO |
| Comparison of Water-based Maskants to Solvent-based Maskants with Solvent Recovery, Jun - 1997, Jim Wichman, AC Products Inc., Placentia, CA |
| Aqueous Cleaner Filtration Study, Oct - 1997, JoAnn A. Quitmeyer |
| Electrostatic Waterborne Coatings, Oct - 1997, PF Staff |
| Improving Plating Performance, Oct - 1997, Michael Akkaoui |
| Elimination of Cadmium Cyanide Waste Treatment, Oct - 1997, PF Staff |
| Simulated Brass Process Eliminates Cyanide, Nov - 1997, Beverly Graves |
| Ion Exchange for Trivalent Chromium Plating Baths, Nov - 1997, Roger S. Woodle |
| Computer Control for Painting, Nov - 1997, Dr. Danny C. Rich |
| Chromium Emission Standards, Dec - 1997, John J. Zodrow |
| Reducing Hexavalent Chromium Emissions, Dec - 1997, PF Staff |
| Venturi/Vortex Scrubber to Recycle Chromium Electroplating Emissions, - 1997, Environmental Security Technology Certification Program |
| Modification of ASTM Standard E1681 on Environmental Cracking to Include Bolt-Load Specimen Testing., - 1997, Underwood, J. H. and VanDerSluys, W. A. and Vigilante, G. N. |
| Environmentally Compliant Surface Treatments of Materials for Aerospace Applications (Les techniques de traitement de surface conformes a la reglementationn sur la protection de l'environment pour les materiaux destines aux applications aeroapatiales)., - 1997, Advisory group for aerospace research and development neuilly-sur-seine |
| Electroplating: A Focus on Chrome Plating , - 1997, Occupational Health Clinic for Ontario workers |
| Initial Performance Testing Under the NESHAP, - 1997, |
| NESHAP Emission Limits , - 1997, |
| Chromium Electroplating and Anodizing Processes: NESHAP Work Practice Standards , - 1997, |
| Chromium Electroplating and Anodizing Processes: New York State Air Permits , - 1997, |
| Chromium Electroplating and Anodizing Processes: Ongoing Monitoring Under the NESHAP, - 1997, |
| Chromium Electroplating and Anodizing Processes: Recordkeeping Under the NESHAP, - 1997, |
| Chromium Electroplating and Anodizing Processes: Reporting Requirements for New Facilities Under the NESHAP, - 1997, |
| Chromium Electroplating and Anodizing Processes: Reporting Under the NESHAP , - 1997, |
| Fact Sheet - Cartridge In-Tank Filtration Systems, - 1997, NC Division of Pollution Prevention and Environmental Assistance |
| Finding an Alternative to Solvent Degreasing - Ultrasonic Aqueous Cleaning, - 1997, Merit Partnership and Tetra Tech EM, Inc |
| Metal Finishing Series - Bag In-Tank Filtration Systems, - 1997, NC Division of Pollution Prevention and Environmental Assistance |
| Metal Finishing Series - Disc In-Tank Filtration Systems, - 1997, NC Division of Pollution Prevention and Environmental Assistance |
| Metal Finishing Series - Identifying and Reducing Contamination in Metal Cleaning, Plating, and Rinsing Baths, - 1997, NC Division of Pollution Prevention and Environmental Assistance |
| Metal Finishing Series - In-Tank Filtration Systems, - 1997, NC Division of Pollution Prevention and Environmental Assistance |
| Metal Recovery and Wastewater Reduction Using Electrowinning, - 1997, Merit Partnership and Tetra Tech EM, Inc |
| Extending Metal Finishing Bath Life, - 1997, Merit Partnership and Tetra Tech EM, Inc. |
| Case Study: Moen Incorporated, - 1997, NC DPPEA |
| Optimizing Ultrasonic Cleaning for Disk Drive Components, - 1997, Gouk, Roman |
| The 38th William Blum Lecture, The Systems View in Automotive Finishes: Essential, but Overlooked, - 1997, Dr. James H. Lindsay |
| Mechanical Drilling, Jan - 1996, RTW's Engineering Staff |
| Dramatic Reductions in Drilling Costs, Jan - 1996, Rogers Beetlestone |
| Alternative Holing Methods, Jan - 1996, Jerry Murray |
| Scoring..., Jan - 1996, Robert A Kelzer |
| An Obvious Innovation, Jan - 1996, Wil Gonzales |
| Increasing Productivity, Jan - 1996, Bernd Frauzem |
| Copper Clad Laminate Press Trends, Jan - 1996, Doug Lamberson |
| Lighting Equipment and Fine-Line Production, Jan - 1996, Bert Ohlig |
| The Dry Film Stripping Solutions, Jan - 1996, Daniel Primett |
| Controlled Thermal Expansion PCBs, Feb - 1996, K. Jayayraj Thomas E. Noll |
| Life At The Bottom Of The Food Chain, Feb - 1996, W. Griff Hill Dirk Braeunlich |
| A Novel Palladium Stripping Solution--Its Performance and Maintenance , Jan - 1996, H.K. Straschil, J.J. Maisano, I.V. Kadija, F. Humiec and J.A. Abys |
| The Effect of Nickel Salts on Electroless Nickel Plating , Jan - 1996, Konrad Parker |
| Plating Difficult Substrates with Electroless Nickel, Jan - 1996, David Crotty, Carl Steinecker, Bradley Durkin |
| Service Plastics Improves Bottom Line, Jan - 1996, [no author] |
| Reach for the TOP, Jan - 1996, Chuck Soule |
| Prime Wheel Rolls into Fully Automated Plating, Feb - 1996, [no author] |
| Automotive Powder Coating, Feb - 1996, Paul Crea |
| Trends and Developments in Electrocoat, Feb - 1996, Jeffrey J. Oravitz |
| Electrodeposited Ni-PTFE Dry Lubricant Coating, Jan - 1996, M. Pushpavanam, N. Arivalagan, N. Srinivasan, P. Santhakumar and S. Suresh |
| NDT Instruments Assure High Quality For California PCB Manufacturer, Jan - 1996, [no author] |
| Process Analysis for Optimization & Pollution Prevention, Jan - 1996, Jeffrey R. Lord, Philip Pouech and Peter Gallerani |
| Waste Minimization A Collaboration Between Lawrence Livermore National Laboratory & the Northern California Association of Metal Finishers, Jan - 1996, C.P. Steffani |
| Corroding Away ‐ Part I, Jan - 1996, Frank Altmayer |
| AESF/EPA Pollution Prevention Training Course for Metal Finishing, Jan - 1996, Peter Gallerani |
| Finishers' Think Tank, Jan - 1996, Marty Borruso |
| Health and Safety: Fire!, Jan - 1996, Martha Martin |
| Pretreatment & Organic Finishing: Expect the Unexpected in Process Changes, Jan - 1996, R.W. Phillips Jr. |
| Standard Topics: Problems from the Field, Jan - 1996, Allen W. Grobin, Jr. |
| SVC Topics: PVD Processes: Anti-reflection Coatings, Jan - 1996, Donald M. Mattox |
| Hands On: Do You Trust Your Chemist (& Others, for That Matter) to Do His Job?, Jan - 1996, Mark Zahn |
| The Plating Retirement Plan, Mar - 1996, Beverly Graves |
| Parts Drying Using Natural Media, Mar - 1996, [no author] |
| Large Coating Job Shops, Mar - 1996, Beverly Graves |
| Permitting Finishers Under the Clean
Air Act Amendments, Mar - 1996, Bo Quick and John Adams |
| How Much is Enough, Feb - 1996, [no author] |
| The No-Clean Issue, Feb - 1996, Frank Cala, Ph.D.
Robert V. Burress, Robin L. Sellers, Ronald L. Iman PH. D., Jeffry F. Koon Dennis J. Anderson |
| HAPS- and Lead-Free Electrocoat for Automotive Applications, Apr - 1996, John Hess |
| Modernizing an Obsolete Coil Anodizing Line, Apr - 1996, David Whedon |
| An End User Perspective: A look at new electrocoating technology, Apr - 1996, [no author] |
| Painting Plastics at Harley-Davidson, Apr - 1996, Beverly Graves |
| Designing a Conveyor for Finishing, Apr - 1996, Don McCluckie |
| Hard Chrome Pollution Prevention Demonstration Project, Interim Report, Dec - 1996, Common Sense Initiative |
| Grove Plating Co—Community's "Good Neighbor" Provides Timely Quality Finishing, Feb - 1996, [no author] |
| Aircraft Depainting: Complying with New Environmental Air Pollution Regulations, Feb - 1996, Jerry P. Bauer |
| Advice and Council: Corroding Away, Part II, Feb - 1996, Frank Altmayer |
| Update on the Common Sense Initiative, Feb - 1996, Robert S. Benson |
| Finishers' Think Tank, Feb - 1996, Marty Borruso |
| Research Corner: Research Results Look Promising, Feb - 1996, Dr. James H. Lindsay |
| Standards Topics: Porosity & Porosity Test Specifications Part 1, Feb - 1996, Allen W. Grobin, Jr. |
| SVC Topics: PVD Processes— Auger Electron Spectroscopy (AES), Feb - 1996, Donald M. Mattox |
| Determination of Composition For Electroplated Pd-Ni Alloy Coatings, Feb - 1996, A.H. Graham, R.S. Teeter, Jr. and J.F. Ficca, Jr. |
| The 777: A Customer's Perspective, Feb - 1996, Gordon McKinzie |
| What Masking Devices Do I Use?, Sep - 1996, John Glebas |
| Self-Assessment Tool for Finishers, Sep - 1996, Kenneth J. Saulter, Lawrence C. Boyd, Jr. and Marie Jones |
| Zinc Phosphate Coatings on NonFerrous Substrates -- Part I, Sep - 1996, Joseph T. Menke |
| Converting from Leaded to Unleaded Electrocoat Primer, Aug - 1996, Juergen Heiler |
| Ion-Exchange Primer, Aug - 1996, Francis J. DeSilva and Michael C. Gottlieb |
| Collecting Data Within an Electrocoating Tank, Aug - 1996, Joseph Subda |
| Remove Contaminants and Eliminate Liability, Aug - 1996, [no author] |
| Reusing Paint Waste, Aug - 1996, [no author] |
| Recycling/Recovery of Brass and Nickel, Aug - 1996, [no author] |
| Compilation of Air Pollutant Emission Factors, Fifth Edition, Chapter 12.20 Electroplating, Sep - 1996, EPA |
| Reverse Osmosis Applications For Metal Finishing Operations, Jul - 1996, [no author] |
| Setting Up the Internet WWW Server "Anodizers' Plaza", Feb - 1996, Dr. Toshihiko Sato & Kyoko Kaminaga |
| Electroless Ni-Fe-B Alloy Plating Solution Using DMAB as a Reducing Agent, Feb - 1996, D. Kim, H. Matsuda, K. Aoki and O. Takano |
| Pd-Ni-plated Lids for Frame-Lid Assemblies, Feb - 1996, I. Boguslavsky, J.A. Abys, E.J. Kudrak, M.A. Williams & T.C. Ong |
| Speciation in Electroless Nickel Solutions, Feb - 1996, N. M. Martyak & J.E. McCaskie |
| Pretreatment & Organic Finishing: Train and Retrain to Sow the Seeds of Success, Feb - 1996, R.W. Phillips Jr. |
| Nickel Exposures in the Plating Workplace and Environment, May - 1996, Gerald A. Crawford |
| Centrifugal Disc Finishing, May - 1996, Daniel T. Regan |
| Water-Borne Coating Improves Air Quality, May - 1996, [no author] |
| Baking Soda Solves Coating Build-Up Problem, Jun - 1996, Kenneth B. Colbert |
| Keeping Spray Masks Clean, Jun - 1996, [no author] |
| Increasing Plating Flexibility, Jun - 1996, [no author] |
| High-Pressure Water Removes Paint Build-up, Jun - 1996, [no author] |
| Improving the Finishing Process, Jun - 1996, [no author] |
| Precision Plating of Electronic Components, Jul - 1996, Beverly Graves |
| Degreasing Solvents, Old and New, Jul - 1996, Janice Baker and Dr. John Durkee |
| New Vapor Degreaser Solves Plating Problems, Jul - 1996, Jim Thomas |
| Curing Oven Basics, Jul - 1996, Kenneth N. Kraft |
| Achieving Quality, Feb - 1996, David. C. Crosby |
| Writing An Acceptable OSHA Hazard Communication Program, Feb - 1996, David Blustein |
| Walking The Talk, Feb - 1996, Brian Maguire |
| Influence of Chloride Ion On Electrocrystallization of Copper, Mar - 1996, N. Pradhan, P.G. Krishna and S.C. Das |
| Electroplated Palladium Coating As a Nickel Migration (Thermal) Barrier, Mar - 1996, J.K. Lim, J.S. Russo and E. Antonier |
| National Steel's Midwest Division Features Electrolytic Tinning & Tin-Free-Steel Lines, Mar - 1996, [no author] |
| Chromium NESHAP Compliance Flowchart, Mar - 1996, Drek A. Newton |
| Rate Monitor for Chemical Etching of Copper Films, Mar - 1996, H.H. Law, A. Borges, G. Robinson and M.D. Evans |
| Advice and Council: Methods of Measuring Surface Tension, Mar - 1996, Frank Altmayer |
| Pd Grows Stronger as a Substitute for Gold, Mar - 1996, James P. Langan |
| Finisher's Think Tank, Mar - 1996, Marty Borruso |
| Standards Topics: Porosity & Porosity Test Specifications—Part 2, Mar - 1996, Allen W. Grobin, Jr. |
| Steel Products Keep Getting Better At Bethlehem Steel's Sparrows Point Plant, Mar - 1996, [no author] |
| P&SF's Exclusive Interview with Fred Hansen Updates Stakeholders on CSI Progress & Global Environmental "Insurance" Measures, Apr - 1996, [no author] |
| Highlights of AESF Week's Health & Safety Forum, Apr - 1996, [no author] |
| Microstructure and Magnetic Properties of Electroless Ni-Fe-B Alloy Films, Apr - 1996, D. Kim, H. Matsuda, K. Aoki and O. Takano |
| Ventilation Considerations For Chromium Plating Tanks, Apr - 1996, Frank Altmayer |
| National Pollution Prevention Initiatives Inspire International Cooperation For Global Environmental Protection, Apr - 1996, [no author] |
| Update on Regulatory Issues: Reduced Funding is Causing a Slowdown, Apr - 1996, William A. Sonntag |
| Finishers' Think Tank, Apr - 1996, Marty Borruso |
| Health and Safety: Outside Contractor Safety Policy, Apr - 1996, Robert F. Lee |
| Pretreatment & Organic Finishing: Well-informed Employees Can Minimize Production Problems, Apr - 1996, R. W. Phillips |
| SVC Topics: PVD Processes: Infrared Spectroscopy, Apr - 1996, Donald M. Mattox |
| Monitoring of Metal Concentrations in Plating Rinse Tanks Using Stripping Voltammetry, Apr - 1996, By J. Wang, V. Edwards, J. Lu and H. Tobias |
| Influence of Bath Acidity on Phosphating of Steel From Additive-Containing Baths— A Study by Potential-Time Measurements, Apr - 1996, T.S.N. Sankara Narayanan |
| Separation of Copper, Nickel, Tin and Lead By Ion Exchange from Plating Rinsewater, Apr - 1996, S. Cerjan-Stefanovic, D. Grubisa and V. Smid
´ |
| Circuit Technology: PC Fabrication: 1996, Apr - 1996, James P. Langan |
| Rules for Packaging Hazardous MaterialsRules for Packaging Hazardous Materials, May - 1996, Frank Altmayer |
| EPA's New Challenge: Improving the Environment While Ensuring Continued Competitiveness for Businesses, May - 1996, Greg Waldrip |
| Health & Safety: Managing Health & Safety at Walt Disney World, May - 1996, Martha Martin |
| Pretreatment & Organic: Prevent Red Rust By Controlling Process Solution, May - 1996, R.W. Phillips Jr. |
| Characterization of Zn-Ni Alloy Deposits, May - 1996, V. Ravindran, R.M. Krishnan and V.S. Muralidharan |
| Colored Conversion Films of Mo-S-Cu Cluster Compounds on a Copper Surface, May - 1996, By X.R. Ye, X.Q. Xin and H.N. Zhou |
| Practical Pollution Prevention Tips From the Wastewater Treatment Operators Forum, May - 1996, [no author] |
| Modification of Anomalous Deposition In Zn-Ni Alloys Using Antimony Additives, May - 1996, By H.-M. Wang and T. J. O'Keefe |
| "Rock & Roll" at the SUR/FIN Exhibit ‐ See the World-famous Copper Boulder, May - 1996, [no author] |
| The Effects of Plasma Nitriding on the Structure And Properties of Electrodeposited Chromium Film, May - 1996, J.P. Ge |
| Plating Line Opens Waste Treatment Opportunities, Oct - 1996, [no author] |
| Aqueous Cleaner Maintenance, Oct - 1996, Mike Berg |
| Vacuum Coating: A Clean Technology, Oct - 1996, Beverly Graves |
| Clean Air Act Compliance for Chromium Emissions from Electrolytic Processes, Oct - 1996, [no author] |
| Writing The Lockout/Tagout Program, Aug - 1996, David Blustein |
| What You Should Know About ISO 14000 (part 1), Aug - 1996, Caroline G. Hemenway |
| What You Should Know About ISO 14000 (part 2), Sep - 1996, Caroline G. Hemenway |
| Top Commitment Is Key, Aug - 1996, Caroline G. Hemenway |
| Going Back To School, Aug - 1996, [no author] |
| Innovative Cooling Systems for Hard Chrome Electroplating, Sep - 1996, The Merit Partnership |
| Nickel Alloy Plating, Nov - 1996, S. Alec Watson |
| Clean Air Act Compliance for Chromium Emissions from Electrolytic Processes, Nov - 1996, [no author] |
| Zinc Phosphate Coatings on Non-Ferrous Substrates, Nov - 1996, [no author] |
| Micro Mechanical Deburring and Polishing, Dec - 1996, Anthony F. Kenton |
| Poised for a Future In Powder Coating, Dec - 1996, Beverly Graves |
| Zinc Phosphate Coatings on Non-Ferrous Substrates, Dec - 1996, Joseph Menke |
| Quality Decorative Plating, Dec - 1996, Dr. Donald Snyder |
| Project Name: Evaluation of Alternative Surface Cleaning Methods, May - 1996, [no author] |
| Recycling and Reuse of Zinc Effluent as a Hydroxide Sludge from an Alkaline Non-cyanide Zinc Process, Jan - 1996, [no author] |
| The Replacement of Hard Chrome Plating by Clean Physical Vapor Deposition Processes, Jun - 1996, [no author] |
| Recycling Nickel Electroplating Rinse Waters , May - 1996, [no author] |
| An Automated Aqueous Rotary Washer for the Metal Finishing Industry , May - 1996, [no author] |
| Cadmium and Chromium Recovery from Electroplating Rinse Waters, May - 1996, [no author] |
| Studies on the Use of a Ni-W-B Alloy to Replace Chromium in Electroplating Applications, Jun - 1996, [no author] |
| Onsite Solvent Recovery with an Atmospheric Still, May - 1996, [no author] |
| Coating Technology for Wood, Plastics and Composites, May - 1996, [no author] |
| Improvement of Tribological Properties Through Nitrocarburizing, Jun - 1996, Georg Wahl, Durkerrit GmbH Thermotechnik, Hanau, Germany & Sharon Alwart, Degussa Corp., Ridgefield Park, NJ |
| Software Applications in Surface Finishing Education & Technology , Jun - 1996, T. Shiraki, K. Kaminaga & T. Sato, Shibaura Technical University, Tokyo, Japan |
| Durability of Warning Labels & Plates , Jun - 1996, A. Ohtsuka, K. Kaminaga & T. Sato, Shibaura Technical University, Shibaura, Minato-ku, Japan |
| The Power of the Platform: Executive Speaking Strategies , Jun - 1996, Julie Mitchell, Mitchell Communications, Cleveland, OH |
| Determination of Brightener Concentration in Non-cyanide Alkaline Zinc Plating Bath by Cyclic Voltammetric Srtipping Method , Jun - 1996, S. Rajendran, Dr. S. Bharathi, V.N. Loganathan, C. Krishna & K.R. Anandakumaran-Nair, Lucas-TVS, Madras, India |
| Metallization of Polypyrrole Part III: Electrodeposition of Silver , Jun - 1996, Maria Hepel & Cynthia Rice, SUNY College, Potsdam, NY |
| Submersible Sensor Probes for In Situ Monitoring of Bath Composition in Metal Plating , Jun - 1996, Tadeusz Hepel, Miroslaw Hepel & Joseph Wiejak, ELCHEMA, Potsdam, NY |
| Control of Plating Solutions in the Automotive Industry by Stripping Voltammetry , Jun - 1996, P. Bratin, G. Chalyt, M. Pavlov, E. Izro & R. Guzman, ECI Technology, Rutherford, NJ & G. Boiksa, McGean-Rohco, Inc., Cleveland, OH |
| Executive Summary , Jun - 1996, Mark Boivin, Enthone-OMI |
| Principles of X-Ray Fluorescence Coating Measurements , Jun - 1996, Dr. Nicholas Yanaki, CMI International, Elk Grove Village, IL |
| Distribution of Cr(VI) in Solutions of Acids , Jun - 1996, Prof. R. Sarmaitis, V. Dikinis, V. Rezaite & V. Stasiukaitis, Institute of Chemistry, Vilnius, Lithuania |
| Structure & Morphology of Three Types of Zinc Deposits from Cyanide, Zincate & Chloride Bath , Jun - 1996, S. Rajendran, V.N. Loganathan, S. Bharathi, C. Krishna & K.R. Anandakumaran-Nair, Lucas-TVS, Madras, India |
| On the Relationship Between Surface Morphology & the Kinetic Factors of Conversion Coating Formation , Jun - 1996, Dr. Mois Aroyo & Nicola Tzonev, Technical University, Sofia, Bulgaria |
| Pre-pickling Effect on the Surface Appearance of Chromated Films , Jun - 1996, Yon-Kyun Song & Hyung-Joon Kim, Pohang Iron & Steel Co., Kyungbuk, Korea |
| Effects of Plating Variables on Thickness Distribution in Alkaline Non-Cyanide Zinc: A Designed Experiment , Jun - 1996, John Commander & Mark Chasse, Enthone-OMI, New Haven, CT |
| Comparison Study of the Potassium Hydroxide Alkaline Non-cyanide Zinc Bath vs. Sodium Hydroxide Alkaline Non-Cyanide Zinc Bath, Jun - 1996, Vijay Kansupada, Novamax Technologies, Inc., Atlanta, GA |
| Morphological & Impedance Analysis of Zinc Electrocrystallization in a Chloride Solution , Jun - 1996, Jeong-Real Park & H.T. Kim, Pohang Iron and Steel Company, Chunnam, Korea |
| A New Process for Plating Zincate Electrolytes , Jun - 1996, Simon Wake & Dr. Trevor Pearson, W. Canning, Inc., Palatine, IL |
| Influence of Surface Patterns of Substrates on the Appearance of Electrodeposits , Jun - 1996, Chong Ho Sonu, J.R. Lee & Y.K. Kim, Research Institute of Industrial Science & Technology, Pohang, Korea |
| Using Quality Teams to Promote Productivity , Jun - 1996, Fred Mueller, Pottstown Plating Works, Inc., Philadelphia, PA |
| ISO 14001 EMS Implementation Project with Metal Finishers , Jun - 1996, Christine A. Branson, Industrial Technology Institute, Ann Arbor, MI |
| How to Work for a _Jerk_ (The Dilbert Principle) , Jun - 1996, Tam Van Tran, Ionics, Inc., Watertown, MA |
| The Use of A.T.P for Quick Determination of Throwing Power , Jun - 1996, Yair Assaf, Bohak Plating Co., Ltd., Hollon, Israel |
| Nickel Electroplating Applications & Trends , Jun - 1996, Dr. George DiBari, International Nickel Inc., Saddle Brook, NJ |
| Environmental Concerns in Nickel Plating , Jun - 1996, Dr. Gerald A. Crawford, consultant to the Nickel Development Institute on Environmental Affairs |
| The STEP Test_Tool for Improved Performance , Jun - 1996, Dr. Donald Snyder, Atotech USA, Inc., Cleveland, OH |
| Methods to Improve the Corrosion Performance of Microporous Nickel-chromium Deposits. , Jun - 1996, Robert A. Tremmel, Enthone OMI, Warren, MI |
| Issues on the Reliability of PWBs Metallized by a Graphite-based Process , Jun - 1996, Michael Carano, Electrochemicals, Inc., Maple Plain, MN |
| Solder Alternatives to HASL , Jun - 1996, James P. Langan, J.P. Langan & Associates, Inc., Red Bank, NJ |
| An Alternative Surface Finish for SnPb Solders: Pure Tin , Jun - 1996, Y. Zhang & J.A. Abys, Lucent Technologies, Murray HIll, NJ |
| Precision Plating of Tin/Lead Alloys for Flip Chip Mounting Technology , Jun - 1996, Dr. A. Gemmler & W. Leonhard, Fraunhofer Institute of Manufacturing & Automation; Dr. H. Richter & K. Ruess, Alcatel SEL Research Center, Stuttgart, Germany |
| Fountain Electroplating of Lead/Tin Solder for Semiconductor Flip Chip Applications , Jun - 1996, Tom Ritzdorf & Bob Batz, Semitool, Kalispell, MT |
| Electroplating Copper from an _Electroless_ Copper Plating Bath , Jun - 1996, Dr. S. Bharathi, S. Rajendran, V.N. Loganathan, C. Krishna & K.R. Anandakumaran Nair, Lucas-TVS, Padi, Madras, India |
| Electroless Nickel-Cobalt-Phosphorus: A New Wear-Resistant Process , Jun - 1996, Mark W. Zitko, Enthone-OMI Inc., New Haven, CT |
| Electroless Nickel Coatings in Process Safety Management of Chlor-alkali Plants , Jun - 1996, Mary Mukhtarian, Robert Tracy & Jerry Evarts, Occidental Chemical Corporation, Dallas, TX |
| Wear-resistant Electroless Nickel: Practical Applications , Jun - 1996, Glenn O. Mallory, Electroless Technologies Corporation, Los Angeles, CA; Dr. Gary Loar, McGean-Rohco, Inc., Cleveland, OH; & Roger Vojinov |
| Electromigration of Metallic Coatings in Electronics , Jun - 1996, Simeon J. Krumbein, AMP Inc., Harrisburg, PA |
| Assessment of the Coatings of Precious Metals Using Sequential Electrochemical Reduction Apparatus , Jun - 1996, Peter Bratin, M. Pavlov, G. Chalyt, E. Izro & R. Gluzman, ECI Technology, East Rutherford, NJ |
| Assessment & Methods of Gold Microhardness , Jun - 1996, Pamela A. Harper & Dr. I-yuan Wei, AMP, Inc., Harrisburg, PA |
| Electrodeposition of Magnetoresistive Co-Cu(Sb) Multilayers , Jun - 1996, N. Lecis & P.L. Cavallotti, Dip.Chimica Fisica Appl. Politecnico di Milano, Milano, Italy |
| Conversion-Type Gold Plating on the Electroless Nickel Plated Substrate for Microelectronic Packages, Jun - 1996, Masayuki Kiso, C. Uyemura Company, Ltd., Osaka, Japan |
| Intrinsic Mechanism in Immersion Gold Plating , Jun - 1996, Keith Kwong Hon Wong, Srinivasa N. Reddy, IBM Microelectronic Division, Hopewell Junction, NY |
| Nickel Recovery for Duplex Plating Operations , Jun - 1996, Mike Sheedy, P.E., Prosep Technologies, Pickering, Ontario, Canada |
| Design Flexibility with Satin Nickel Plating , Jun - 1996, Gerd Schongen, LPW Chemie GmbH, Neuss, Germany |
| Plating of Automotive Aluminum Wheels , Jun - 1996, Douglas E. Lay, CEF, TASKEM, Inc., Cleveland, OH |
| Brush Plating Hard Trivalent Chromium , Jun - 1996, Z. Mathe, Liquid Development Company, Cleveland, OH |
| Brush Nickel Plating Railroad Axles , Jun - 1996, Jone M. Rodgers, Metallize Illinois, Inc., Vandalia, IL |
| Brush Plating Mistakes Made & Corrections Taken , Jun - 1996, David Barclay Sr., Dalcan Services Limited, Burlington, Ontario, Canada |
| The Use of Selective Plating in Aircraft Maintenance , Jun - 1996, Danny L. Martin, Erickson Air-Cane, Central Point, OR |
| Minimizing Hazardous Waste Generation in Brush Plating , Jun - 1996, W.R. Wachtler, P.E., WR Associates, Inc., Encinitas, CA |
| Brush Plating-_An Overview , Jun - 1996, Beldon Hutchinson, Liquid Development Co., Cleveland, OH |
| Overview of the Important Characteristics & Properties of Chromium Coatings , Jun - 1996, D.A. Schario, D.S. Viszlay & E.W. Brooman, Concurrent Technologies Corporation, Johnstown, PA |
| The Mechanisms of Chromium Plating , Jun - 1996, N.V. Mandich, HBM Engineering, Lansing, IL |
| A Review of Decorative Trivalent Chromium Electroplating , Jun - 1996, Dr. D.L Snyder, Atotech USA, Inc., Cleveland OH |
| Brush Electroplating Trivalent Chromium , Jun - 1996, Beldon Hutchinson, Liquid Development Company, Cleveland, OH |
| The Engineering Properties of Hard Trivalent Chromium Functional Deposits as Deposited from a New Bath , Jun - 1996, V.N. Kudryavtsev, E.G. Vinokurov, O.E. Azarko & V.V. Kusnetsov, Mendeleyev University of Chemical Technology, Moscow, Russia & S.R. Schachameyer, Eaton Corporation, Milwaukee, WI |
| Functional Chromium Plating from a Trivalent Chromium Bath , Jun - 1996, R.P. Renz, C.D. Zhou, E.J. Taylor, R.G. Marshall, E.C. Strotz & B. Grant, Faraday Technology, Inc., Dayton, OH |
| An Environmentally Friendly Method for Plating Semiconductor Components: Palladium Lead Frame Plating , Jun - 1996, R. Schetty, LeaRonal, Inc., Freeport, NY |
| Application-specific Surface Finishing Technique for Leadframes , Jun - 1996, I. Kadija, J. Abys, C. Fan, F. Humeric & I. Boguslavsky, Lucent Technologies, Murray Hill, NJ |
| A High Temperature Electrical Contact Finish for Automotive Applications , Jun - 1996, E.J. Kudrak, J.A. Abys & V.A. Chinchankar, Lucent Technologies, Murray Hill, NJ |
| EMI-RFI Shielding with Direct-Plate Technology , Jun - 1996, Dr. Nayan Joshi & Dr. Hermann Middeke, Atotech USA, Inc., Somerset, NJ |
| A New Palladium Plating System for Decorative Purposes , Jun - 1996, I. Boguslavsky, J.J. Maisano, J.A. Abys, B.F. Stacy & V.T. Eckert, Lucent Technologies, Murray Hill, NJ |
| Replacing Chlorinated Solvents with Aqueous Based Processes in Metal Finishing Cleaning Operations, Jun - 1996, Stephen F. Rudy, Frederick Gumm Chemical Company, Inc., Kearny, NJ |
| Electroplating from Additive-free Baths , Jun - 1996, C.D. Zhou, R.P. Renz, E.J. Taylor, E.C. Stortz & B.J. Grant, Faraday Technology, Inc., Dayton, OH |
| Trends in Waste Treatment in Electroplating in Japan , Jun - 1996, Dr. Tadao Hayashi, University of Osaka Prefecture, Japan |
| International Shipment of Hazardous Waste Ban: Free Trade...NOT! , Jun - 1996, Dr. Paul Piplani, R.E.M., TTX Environmental, Sturgeon Bay, WI |
| European Chemical Regulations , Jun - 1996, Dr. Xavier Albert Ventura, LC Systeme Iberica, S.A., Barcelona, Spain |
| Health & Safety Program Integration , Jun - 1996, Philip A. Platcow, C.I.H., Sedgwick James, Boston, MA |
| The Cost-effective Use of Chemical Fixation to Remediate Soils Contaminated from Metal Processing Operations , Jun - 1996, Dr. David J. Leu, Clayton Environmental Consultants, Inc., Laguna Hills, CA |
| An Overview of PVD Processing & Applications , Jun - 1996, Donald M. Mattox, Society of Vacuum Coaters, Albuquerque, NM |
| Physical Vapor Deposition Wear-resistant & Decorative Coatings , Jun - 1996, Mark Podob, Richter Precision, Inc., East Petersburg, PA |
| Case Study: Lifetime Anti-tarnish Finish , Jun - 1996, S.K. McKenzie, Vapor Technologies, Inc., Boulder, CO; W. Thomasson, Weiser Lock & J. Kostura, Masco Corporation |
| Wear & Corrosion-Resistant Decorative Hard Coatings in Large Volume PVD Units , Jun - 1996, T. Hurkmans & F. Hauzer, Hauzer Techno Coating Europe B.V., The Netherlands |
| Functional & Decorative Coatings by Physical Vapor Deposition , Jun - 1996, Robert R. Aharonov, Multi-Arc, Inc., Rockaway, NJ |
| PVD Chrome as a Replacement of Hexavalent Chrome , Jun - 1996, Dr. Brent Lee, Vacuum Plating Technology Corp., San Jose, CA |
| The Least You Should Know About Color , Jun - 1996, Greg Caskey, Lakeshore Physics & Analytics, Holland, MI |
| Selective Ion Exchange Resins in Effluent Polishing Systems , Jun - 1996, Philip Fatula, BAYER Corp., Pittsburgh, PA |
| Use of a NASA-Developed Ion Exchange Material for Toxic Metal Removal from Electroplating Baths , Jun - 1996, M.J. Ginther, J.T. Folkers, O.M. Uy, Johns Hopkins University/APL, Laurel, MD; K. Street, NASA Lewis Research Center, Cleveland, OH; & J. Naumann Jr., A-1 Plating Company, Baltimore, MD |
| Simultaneous Multi-Metal Recovery with a Proprietary Process , Jun - 1996, C.D. Zhou, E.C. Stortz, E.J. Taylor, R.P. Renz & T. Sousa Faraday Technology, Inc., Dayton, OH |
| Recycling of Aqueous Cleaners and Vibratory Compounts, Jun - 1996, Greg Savage, Membrex, Inc., Fairfield, NJ |
| Wastewater Recycling for Electronic Plating , Jun - 1996, Kuo-Ruey Huang & Shan-Nan Lee, ITRI Taiwan, Chiu-Kwei Huang & Jung-Chung Tsao, PHILIPS E.B.E.I., Taiwan |
| Hexavalent Chrome Emission Testing Program: Assisting Metal Finishers in Meeting the 1995 Chrome MACT Standard , Jun - 1996, Jim Hensley, Industrial Technology Institute, Ann Arbor, MI |
| Pulse Plating , Jun - 1996, Dr. Per Moller, Peter Torben Tang, M.Sc. & Dr. Peter Leisner, Technical University of Denmark, Lyngby, Denmark |
| Important Parameters & Applications for Nickel Electroplating , Jun - 1996, Peter T. Tang, M.Sc., Frank Fontenay, M.Sc. & Dr. Per Moller, Technical University of Denmark, Lyngby, Denmark |
| Pulse Plating of Nickel from a Sulfamate Electrolyte, Jun - 1996, Dr. Jean Rasmussen, Metal Pioneer Finishing, Green Bay, WI & Else Hansen, Danfoss, A/S, Nordborg, Denmark |
| The Use of Fractally-Designed Wave Forms in Electroforming , Jun - 1996, Jonathan S. Bullock, Roger L. Lawson & John R. Kilpatrick, Lockheed Martin Energy Systems, Oak Ridge, IN |
| Electrodeposition & Magnetic Behavior of Co-Co Multilayered Thin Films Subject to Low-Temperature Annealing , Jun - 1996, Dr. David Lashmore & Susan Hua, Materials Innovation, West Lebanon, NH |
| Powder Coatings_A Customer Analysis , Jun - 1996, Paul D. Lovett, P.D. Lovett & Company Management Associates, Allentown, PA |
| Powder Coating: A Comparison of the European & American Approaches , Jun - 1996, John P. Birch, John Birch Associates, Warwickshire, England |
| Electrophoretic Lacquering , Jun - 1996, Chris Mayhew, W. Canning, Inc., Palatine, IL |
| Powder Clearcoats , Jun - 1996, Dr. Paul H. Pettit, Jr., PPG Industries, Inc., Strongsville, OH |
| Fundamentals of Pretreatment for Powder Coating Applications , Jun - 1996, Brad Gruss, Fremont Industries, Inc., Shakopee, MN |
| Spray Applications for Powder Coating , Jun - 1996, Ken Kreeger, Nordson Corp., Amherst, OH |
| A Model of Copper Electrodeposition from Cyanide Electrolyte , Jun - 1996, David A. Dudek & Dr. Peter S. Fedkiw, North Carolina State University, Raleigh, NC |
| The Role of Macro- & Microthrowing Power in Metal Distribution on Small-scale Profiles & Discrete Cathode Areas , Jun - 1996, Dr. Sergei S. Kruglikov, Mendeleyev University of Chemical Technology & Dr. Elena S. Kruglikova, Institute of Metallurgy, Moscow, Russia |
| Optical Precision Electroforms , Jun - 1996, Dongqing Cao & Darrel E. Engelhaupt, University of Alabama in Huntsville, Huntsville, AL |
| Dealloying Studies of Nickel Zinc Coating on Steel , Jun - 1996, H.W. Pickering, M. Stein & K.G. Well, Pennsylvania State University, University Park, PA |
| Nickel Electrodeposition from Methanesulonic Acid-based Baths , Jun - 1996, V.N. Kudryavtsev, S.A. Makeimenko & I.S. Chernyshova, Mendeleyev University, Russia |
| Intelligent Optimization System for Source Reduction in Electroplating Plants , Jun - 1996, Dr. Y.L. Huang & K.Q. Luo, Wayne State University, Detroit, MI |
| A Reverse Pulse Process for Electrodeposition of Aluminum , Jun - 1996, Dr. Wolfgang Fromberg & Sandy Donaldson, AlumiPlate, Inc., Coon Rapids, MN |
| The Influence of Pulse Plating Frequency on the Hardness of Bright Copper Deposits , Jun - 1996, Dr. Mois Aroyo, Technical University & Dr. Dimitar Stoychev, Bulgarian Academy of Science, Sofia, Bulgaria |
| Comparing Four Different Pulse Anodizing Processes on Extruded 6063 Aluminum , Jun - 1996, Anne Deacon Juhl, M.Sc., & Dr. Per Moller, Technical University of Denmark, Lyngby, Denmark |
| Vapor Phase Corrosion Inhibitors , Jun - 1996, Cheryl Smith, Senson Corp., Ltd., Chandler, AZ |
| Effect of Resin & Additives for the Lubricant-Coated Steel Sheet , Jun - 1996, Chan-Sup Park & Yong-Gyun Jung, Research Institute of Industrial Science & Technology, Pohnag, Korea |
| Improved Corrosion Resistance Obtained Through Replacement of Chromium with Nitrocarburizing , Jun - 1996, Georg Wahl, Durferrit GmbH Thermotechnick, Hanau, Germany & Sharon Alwart, Degussa Corp., Ridgefield Park, NJ ,SUR/FIN 96, Session V. ,1996,Jun,0,Request,SUR/FIN 96, Session V. ,1996,Jun,0,Request |
| Self-assembled Monolayers (SAM) as a Molecular Level Barrier for the Corrosion of Mild Steel , Jun - 1996, S. Bharathi, S. Rajendran, V.N. Loganathan, C. Krishna & K.R. Anhandakumaran-Nair, Lucas-TVS Limited, Padi, Madras, India |
| Experiences from Field Corrosion Test of Zinc & Zinc Alloy Coatings , Jun - 1996, Dr. Per Moller & Dr. Peter Leisner, Technical University of Denmark, Lyngby, Denmark |
| An Accelerated Electrolytic Corrosion Test for the CU-Ni-Cr Plating System on the Intricate Shape Details , Jun - 1996, Dr. Rustem A. Kaidrikov & Dr. Boris L. Juravelv, Kazan State Technological University, Kazan, Russia. |
| Encasement: A Generic Approach for Corrosion Control in Industrial Facilities , Jun - 1996, John Stahl, Preferred Solutions, Inc., Cleveland, OH |
| Effect of Additives on Zn-Ni Alloy Electrodeposition , Jun - 1996, Hyun-Tae Kim & Young-Sool Jin, Pohang Iron & Steel Company, Pohang-shi, Kyungbuk, Korea |
| Performance Characteristics of Zinc Alloys , Jun - 1996, David Crotty & Robert Griffin, MacDermid, Inc., New Hudson, MI |
| Cadmium Replacement Through Zinc Alloy Technology: A Customer-Supplier Joint Research Effort , Jun - 1996, Victor Waldman, Enthone-OMI Inc., Warren, MI & Mark Barnes, Amphenol Corp. |
| Alloy Alternatives to Hexavalent Chromium , Jun - 1996, Jeff Michael Szotek, Enthone-OMI Inc., Warren MI |
| Surface Finishing of Aluminum Alloy for Die Cast , Jun - 1996, M. Yokoyama, K. Kaminaga & T. Sato, Shibaura Technical University, Tokyo, Japan |
| Internet WWW Server, _Anodizers_ Plaza_ , Jun - 1996, K. Kaminaga & T. Sato, Shibaura Technical University, Tokyo, Japan |
| How to Use Casting for Surface Treatment (CAST) on Sand Cast Aluminum Alloys , Jun - 1996, Anne Deacon Juhl, M.Sc. & Dr. Per Moller, Technical University of Denmark, Lyngby; Dr. Leif Hojslet Christensen, Danish Technological Institute, Tastrup, Denmark; & Dr. Jean Rasmussen, Pioneer Metal Finishing, Green Bay, WI |
| Abrasive Wear-resistance of Pulse-anodized Aluminum Alloys , Jun - 1996, Dr. Jean Rasmussen, Pioneer Metal Finishing, Green Bay, WI |
| Problem-solving Hints for Anodizing , Jun - 1996, Richard W. Mahn, Novamax Technologies (US), Inc., Atlanta, GA |
| New Technologies for Coloring Anodized Aluminum , Jun - 1996, Dr. Xavier Albert Ventura, LC Systeme Iberica, S.A., Barcelona, Spain |
| Effect of Bath Stabilizers on Porosity of Electroless Nickel Deposits , Jun - 1996, L. Das & D.-T. Chin, Dept. of Chemical Engineering, Clarkson University, Potsdam, NY |
| The Effects of Electroplated Zn-Ni Alloys on Inhibition of Hydrogen Permeation , Jun - 1996, Prof. B.N. Popov, D.H. Coleman & Dr. R.E. White, Dept. of Chemical Engineering, University of South Carolina, Columbia, SC |
| Modeling the Zn-Ni Electrodeposition System ‐ Electrode Reaction Kinetics Calculation , Jun - 1996, M. Ranasubramanian, S.N. Popova, B.N. Popov and Dr. R. E. White, Dept. of Chemical Engineering, University of South Carolina, Columbia, SC |
| Continuous Electroplating onto a Moving Resistive Cathode , Jun - 1996, [no author] |
| Performance Evaluations of Tungsten Carbide HVOF Thermal Spray Coating (Record 1 of 2) , - 1996, Daniel Greving, The University of Tulsa, Mechanical Engineering Department, Tulsa, OK |
| Performance Evaluations of Tungsten Carbide HVOF Thermal Spray Coating (Record 2 of 2) , - 1996, Daniel Greving, The University of Tulsa, Mechanical Engineering Department, Tulsa, OK |
| X-Ray Fluorescence: The New Key to Highly Accurate, Non-destructive Coating Thickness Measurements for Industry , - 1996, Dr. N. Yanaki, CMI International, Inc., Elk Grove Village, IL |
| Copper Stripping Process & Recycling of Waste Stripper , - 1996, Phil Edelstein, Phibrotech, Inc., Fort Lee, NJ |
| The Common Sense Initiative & Other Government _Reinvention_ Programs Being Explored by the CSI Metal Finishing Sector (Record 1 of 4) , - 1996, Robert Benson, Office of Policy, Planning and Evaluation, U.S. Environmental Protection Agency, Washington, DC |
| The Common Sense Initiative & Other Government _Reinvention_ Programs Being Explored by the CSI Metal Finishing Sector (Record 2 of 4) , - 1996, Robert Benson, Office of Policy, Planning and Evaluation, U.S. Environmental Protection Agency, Washington, DC |
| The Common Sense Initiative & Other Government _Reinvention_ Programs Being Explored by the CSI Metal Finishing Sector (Record 3 of 4) , - 1996, Robert Benson, Office of Policy, Planning and Evaluation, U.S. Environmental Protection Agency, Washington, DC |
| The Common Sense Initiative & Other Government _Reinvention_ Programs Being Explored by the CSI Metal Finishing Sector (Record 4 of 4) , - 1996, Robert Benson, Office of Policy, Planning and Evaluation, U.S. Environmental Protection Agency, Washington, DC |
| An Industry Perspective of the CSI , - 1996, B.J. Mason, Mid-Atlantic Finishing, Capitol Heights, MD |
| The Use of Multi-stage Aqueous Washers in the Manufacturing or Maintenance Processes of Aerospace Components , - 1996, Carlos Peres, Proceco Ltd., Montreal, Quebec, Canada |
| DOE & SPC on Plating Solutions , - 1996, Gene Calvert, Boeing, Wichita, KS |
| Pack Aluminide Coatings_The First 40 Years , - 1996, D.H. Boone, Boone & Associates, Inc., Walnut Creek, CA |
| Hydrogen Embrittlement Control Techniques , - 1996, Gary Lawrenson, Lawrence Electronics Co., Seattle, WA |
| Low Concentration Hard Chrome Plating , - 1996, Ron Lee, Southwest United Industries, Inc., Tulsa, OK |
| Thermal Spray for Chromium Plating Replacement (Record 2 of 2) , - 1996, J. Quets & J.R. Alford, Praxair Surface Technologies, Inc., Indianapolis, IN |
| Chemically Accelerated Vibratory Finishing of Aerospace Components (Record 2 of 2) , - 1996, William Nebiolo, REM Chemicals, Inc., Southington, CT |
| Non-cyanide Alkaline Copper Plating , - 1996, Stan Olander, Electrochemical Products Inc., New Berlin, WI |
| Implementation of ISO 14,000 at an Aircraft Engine Overhaul Facility , - 1996, Peter Moleux, P.E., Peter Moleux & Associates, Newton, MA |
| HVOF-sprayed Coatings for Navy Jet Engine Component Repair (Record 2 of 2) , - 1996, Donald S. Parker, Naval Aviation Depot, Naval Air Station, Jacksonville, FL |
| A Multimedia Computer-assisted Learning Tool for Plasma Spray (Record 2 of 2) , - 1996, Chunqing Cheng & E.J. Onesto, Concurrent Technologies Corporation, Johnstown, PA |
| Production Testing of Aqueous Cleaning Systems (Record 1 of 3) , - 1996, Richard Pirrotta & David Roberts, Concurrent Technologies Corporation, Johnstown, PA |
| Production Testing of Aqueous Cleaning Systems (Record 2 of 3) , - 1996, Richard Pirrotta & David Roberts, Concurrent Technologies Corporation, Johnstown, PA |
| Production Testing of Aqueous Cleaning Systems (Record 3 of 3) , - 1996, Richard Pirrotta & David Roberts, Concurrent Technologies Corporation, Johnstown, PA |
| Recycling Aqueous Cleaners & Parts Washer Rinse Waters , - 1996, Dr. Phil Rolchigo, Membrex, Inc., Fairfield, NJ |
| Alkaline Cleaning of Hollow Turbine Airfoils , - 1996, Gary Lomasney, Pratt & Whitney, East Hartford, CT |
| Lessons Learned in the Application of Plasma Spray Coatings on Jet Engine Parts Dominic Varacalle, Vartech Inc.; , - 1996, Walter Riggs II, TubalCain Company, Inc.; & John Figert, Jack Worthington, Mark Syma & Domingo Carillo, Kelly Air Force Base, San Antonio, TX |
| Solvent Reduction Processes in Place in the Aerospace Industry , - 1996, William Stinson, Jr., William Spears, Jim Shank & Ken Colbert, Church & Dwight Co., Inc., Princeton, NJ |
| Automated Ultra-High Pressure Waterjet Process Applications (Record 1 of 3) , - 1996, Arthur Fricke & Frederick Lancaster, Concurrent Technologies Corp., Johnstown, PA |
| Automated Ultra-High Pressure Waterjet Process Applications (Record 2 of 3) , - 1996, Arthur Fricke & Frederick Lancaster, Concurrent Technologies Corp., Johnstown, PA |
| Automated Ultra-High Pressure Waterjet Process Applications (Record 3 of 3) , - 1996, Arthur Fricke & Frederick Lancaster, Concurrent Technologies Corp., Johnstown, PA |
| Vapor Degreaser Replacement for Removing Fluorescent Penetrants from Aerospace Castings (Record 1 of 2) , - 1996, TBA, Proceco Ltd., Montreal, Quebec, Canada |
| Vapor Degreaser Replacement for Removing Fluorescent Penetrants from Aerospace Castings (Record 2 of 2) , - 1996, TBA, Proceco Ltd., Montreal, Quebec, Canada |
| Al/Ceramic Overlay Coatings for Compressor & Al/Si Diffusion Coatings for Turbine Parts Containing Low Cr6+ , - 1996, Dr. Martin Thoma, MTU Deutsche Aerospace, Munchen, Germany |
| Long-delay Hydrogen Embrittlement Phenomena By Plating High-Strength Steel Components , - 1996, Dr. W. Paatsch, Federal Institute for Materials Research & Testing (BAM), Berlin, Germany |
| SVC Topics: PVD Processes:
Deposition Rate Monitors, Aug - 1996, Donald M. Mattox |
| Aging of Cold-Sealed Aluminum Oxide Films
At Room Temperature and at 50o C, Aug - 1996, By E. Otero, V. López and J.A. González |
| Effects of Codeposited Tungsten on the Properties
Of Low-Phosphorus Electroless Nickel Coatings, Aug - 1996, By Jun Li, Xinguo Hu and Dianlong Wang |
| Annealing Behavior of Palladium-Nickel
Alloy Electrodeposits, Aug - 1996, By J.A. Abys, J.J. Maisano, I.V. Kadija, E.J. Kudrak and S. Nakahara |
| Powder Coatings: A Comparison of the United States and European Approaches, Aug - 1996, John Birch |
| Effect of Bath Stabilizers
On Electroless Nickel Deposition on Ferrous Substrates, Aug - 1996, By L. Das and D.-T. Chin |
| Electroplating: An Ancient Art Turned Into Leading-edge Technology, Aug - 1996, Don Baudrand, CEF |
| Powder Coating—
Should You Make the Switch?, Aug - 1996, By Paul D. Lovett |
| Advice and Council, Aug - 1996, Frank Altmayer |
| World Literature Review: Review Covers IMF Transactions for May
& Galvano Organo (May & June), Aug - 1996, Howard Smith |
| Standards Topics: Standards Writing—An Ongoing Process, Aug - 1996, Allen W. Grobin, Jr., |
| Artistic Plating Combines
Plating & Powder Coating
To Satisfy High-end
Consumer Market, Aug - 1996, [no author] |
| Health & Safety: Protecting Workers
In Hot Environments, Sep - 1996, Martha S. Martin, CEF, CECM |
| Pretreatment & Organic Finishing: The Human Element, Sep - 1996, R.W. Phillips Jr. |
| Research Corner: Valuable Work at Stevens Institute
& University of South Carolina, Sep - 1996, Dr. James H.Lindsay |
| SVC Topics: PVD Processes:
X-ray Photoelectron Spectroscopy (XPS), Sep - 1996, Donald M. Mattox |
| Standards Topics, Sep - 1996, Allen W. Grobin, Jr. |
| Long-delay Hydrogen Embrittlement Phenomena
In Plating High-strength Steel Components, Sep - 1996, W. Paatsch |
| N-Heterocyclic Organic Compounds as Additives
In the A-C Coloring of Anodized Aluminum
From Nickel Sulfate Solutions
Part I: Effect on Color Intensity and Uniformity of the Probes, Sep - 1996, By B. Karagianni and I. Tsangaraki-Kaplanoglou |
| Electrodeposition of Cu-Co Multilayer Films, Sep - 1996, By J. Xue, J. Wu and D. Yang |
| Rubbing of Japanese Temple Carving ( Circa 600 A.D.)
Contains First Reference to Plating in Japan, Sep - 1996, [no author] |
| Automated EN Line
Increases Quality & Productivity
For Michigan's Finishing Services, Sep - 1996, [no author] |
| Newly Launched Leadtec
Banks on Success & Expansion, Sep - 1996, [no author] |
| 1996 Scientific
Achievement Award:
Dr. James H. Lindsay's
Research is a Driving Force
In Automotive Form & Function, Sep - 1996, [no author] |
| Modified Push-Pull Ventilation
For Energy Efficiency in Process Design, Sep - 1996, By Kevin D. Bomboy, P.E. |
| Advice & Counsel: The "Any Credible Evidence" Rule is Incredible!, Sep - 1996, Frank Altmayer, CEF |
| Analytically Speaking: Characterization of Deposits,
Coatings & Electroforms ‐ Part I, Sep - 1996, Dr. Rolf Weil |
| Circuit Technology: Benefits Derived from Reducing Hazards
To Environmental Safety, Sep - 1996, James P. Langan |
| Enviroscope: OSHA's Regulatory Agenda, Sep - 1996, Vicki P. Sherwood |
| Finishers' Think Tank, Sep - 1996, Marty Borruso |
| Electroless Plating: The Past is Prologue
The 37th William Blum Lecture, Sep - 1996, Dr. Juan Hajdu |
| Nickel
Electroplating
Applications
& Trends, Oct - 1996, By Dr. George A. DiBari |
| N-Heterocyclic Organic Compounds as Additives
For A-C Electrolytic Coloring of Anodized Aluminum
From Nickel Sulfate Solutions
Part II. Mechanism of Their Action, Oct - 1996, By B. Karagianni, I. Tsangaraki-Kaplanoglou |
| The Effect of Solution Age on Corrosion Resistance
Of Electroless Nickel Deposits, Oct - 1996, By R.N. Duncan |
| Chromium-Plated
Trucks
Drive for
Attention
At Olympic
Games
Opening, Oct - 1996, [no author] |
| Methods to Improve
The Corrosion Performance
Of Microporous Nickel Deposits, Oct - 1996, By Robert A. Tremmel |
| Advice & Counsel: A Wish List for Metal Finishers, Oct - 1996, Frank Altmayer, CEF |
| Finishers' Think Tank, Oct - 1996, Marty Borruso |
| Analytically Speaking:Characterization of Deposits,
Coatings & Electroforms ‐ Part II, Oct - 1996, Dr. Rolf Weil |
| Pretreatment & Organic Finishing: Misuse of Solvents Gives Unacceptable Finish, Oct - 1996, R.W. Phillips Jr. |
| SVC Topics: PVD Processes:
Pulsed DC for Sputtering & Biasing, Oct - 1996, Donald M. Mattox |
| Standards Topics: The Transition of Military
& Federal Specifications, Oct - 1996, Allen W. Grobin, Jr. |
| Performance Characteristics of Electrochemically
Prepared Tin Fluoborate, Oct - 1996, By S.M. Silaimani, M. Pushpavanam and K.C. Narasimham |
| Hardness and Structure of Electrodeposited Nickel
From a Nickel Sulfamate-Formamide Bath, Oct - 1996, By V.B. Singh and R.S. Sarabi |
| S T A N D A R D S:
Sometimes You Can't Live With Them,
But You Sure Can't Live Without Them!, Dec - 1996, By Allen W. Grobin, Jr. |
| Encasement: A Generic Approach
To Corrosion Control in Industrial Facilities, Dec - 1996, By John A. Stahl |
| Analytically Speaking: Characterization of Deposits,
Coatings & Electroforms ‐ Part IV, Dec - 1996, Dr. Rolf Weil |
| Direct Metallization on
Surface-Modified Polyimide Resin, Dec - 1996, By M. Seita, M. Kusaka, H. Nawafune and S. Mizumoto |
| DistributionofCr(VI) ParticlesinAcidSolutions
ByR. Sarmaitis,V.Dikinis,V. RezaiteandV.Stasiukaitis, Dec - 1996, By R. Sarmaitis,V.Dikinis,V. RezaiteandV.Stasiukaitis |
| Advice & Counsel: ISO SHMISO, Dec - 1996, Frank Altmayer, CEF |
| Finishers' Think Tank, Dec - 1996, Marty Borruso |
| Health & Safety: Back Belts ‐
Do They Really Help?, Dec - 1996, Jane Lemke |
| Pretreatment & Organic Finishing: Use Common Sense to Avoid Flash Rust Problems, Dec - 1996, R.W. Phillips Jr. |
| SVC Topics: PVD Processes:
Mechanical Vacuum Pumps, Dec - 1996, Donald M. Mattox |
| The Use of Synthetic Hydrotalcite
as a Chloride Ion Getter
for a Barrier Aluminum Anodization Process, Dec - 1996,
By J.K.G. Panitz, D.J.Sharp and Brian Melody |
| Corrosion of Hard Chromium Electrodeposits, - 1996, Dr. Allen R. Jones |
| Comparison of Logical Applications for 306 and 306A, - 1996, Whitby Ellsworth |
| A Review of Decorative Trivalent Chromium Electroplating, - 1996, George E. Shahin |
| Enviroscope: The Communications Problem, Aug - 1996, H. Lee Martin |
| Finishers' Think Tank, Aug - 1996, Marty Borruso |
| Pretreatment & Organic Finishing: Evaluate Potential Problems
Before Modifying Precleaning Processes, Aug - 1996, R.W. Phillips Jr. |
| Final Report: Control Data Application Project to Evaluate a Total Rinse Recycle and Reclamation System provided by Water Technologies, Inc. , May - 1996, [no author] |
| Applications Engineering and Process Modification , Jan - 1996, [no author] |
| Hazardous Waste Minimization Feasibility Study and Pilot Project , May - 1996, [no author] |
| Recovering EDTA in a Printed Circuit Manufacturing Operation , May - 1996, [no author] |
| Watts Nickel and Rinse Water Recovery via an Advanced Reverse Osmosis System , May - 1996, [no author] |
| Statewide Evaluation Of Pollution Prevention And Risk Reduction From Emerging Industrial Technologies, - 1996, [no author] |
| Conformal Coating Adhesion Over No-Clean Fluxes and No-Clean Processes, With Low VOC Materials , - 1996, [no author] |
| Carbon-Black Dispersion Preplating Technology for Printed Wire Board Manufacturing, May - 1996, [no author] |
| Analysis of Pollution Prevention and Waste Minimization Opportunities Using Total Cost Assessment: A Case Study in the Electronics Industry, - 1996, [no author] |
| Pollution Prevention Strategies for Electronics Industries, - 1996, [no author] |
| Modifications to Reduce Drag Out at a Printed Circuit Board Manufacturer, May - 1996, [no author] |
| Reclamation of Nitric Acid from Solder Strip, - 1996, [no author] |
| Solvent Reduction Through Use of a No-Clean Soldering, - 1996, [no author] |
| Recycling/Purification for Plating/Cleaning BathsDate Last Updated: 11/96, - 1996, [no author] |
| Substituting Cadmium Cyanide Electroplating with Zinc Chloride , May - 1996, [no author] |
| Physical Vapor Deposition (PVD) Coatings and ION Beam Processing as Alternatives to Electroplating , - 1996, [no author] |
| Electroplating Wastewater Treatment by Ceramic Membranes, Jun - 1996, [no author] |
| Evaluation of the Effectiveness of Low Temperature Evaporation and Reverse Osmosis for Chemical Recycling/Reuse of Nickel Electroplating Rinse Waters , Jan - 1996, [no author] |
| Autobody Surface Coating Emissions Reduction , Feb - 1996, [no author] |
| A Replacement Non-Methylene Chloride Paint Remover , May - 1996, [no author] |
| Development and Demonstration of Non-Polluting Depainting Solvents for Large Aircraft , May - 1996, [no author] |
| Powder Coating On Fiberglass Tubes, - 1996, [no author] |
| Streamlined LCA Model Development and Demonstration , May - 1996, [no author] |
| Organic Protective Coatings and Application Technology , Nov - 1996, [no author] |
| Bicarbonate of Soda Blasting Technology for Aircraft Wheel Depainting , May - 1996, [no author] |
| Evaluation of Chemical Agent Resistant Coating (CARC) Application, Jun - 1996, [no author] |
| Evaluation of new multi-component HVLP spray equipment for the application of linear polyurethane exterior paint to fiberglass yachts, - 1996, [no author] |
| Drop Size Distributions for Paint Sprays and other Industrial Processes, Jun - 1996, [no author] |
| Evaluation of Ultrafiltration to Recover Aqueous Iron Phosphating/Degreasing Bath , Jan - 1996, [no author] |
| Aircraft Maintenance Chromium Replacement, Nov - 1996, [no author] |
| MEK Recovery/Reuse Via Adsorptive Resin Separation , Jun - 1996, [no author] |
| Solvent Substitution and Low VOC Cleaners, Nov - 1996, [no author] |
| Waste Minimization Audit - Architectural Hardware Industry, May - 1996, [no author] |
| The objective of this project is to develop a nontoxic, zero discharge coating that protects ship hulls from marine fouling organisms., - 1996, [no author] |
| Status of Selected Paint Removal Studies Conducted by the Joint Depot Maintenance Analysis Group, May - 1996, [no author] |
| Life Cycle Engineering and Design Program, Feb - 1996, [no author] |
| Solventless Spray Technology for Commericialization, May - 1996, [no author] |
| Improved Paint Gun Washing System, Feb - 1996, [no author] |
| Waste Paint Reduction and Disposal Options Studies: Volume I, Jan - 1996, [no author] |
| Pollution Prevention of an Electrodeposition Coating and Pre-treatment System, Oct - 1996, [no author] |
| Identification of Chemical Coating/Depainting Alternatives for Selected DoD Operations, Jun - 1996, [no author] |
| Dual Cure Coatings, Jan - 1996, [no author] |
| Aircraft Depainting Technology, Nov - 1996, [no author] |
| Evaluation of Ultrafiltration to Recover Aqueous Iron Phosphating/Degreasing Bath, May - 1996, [no author] |
| Automotive Original Equipment Manufacturer , May - 1996, [no author] |
| Evaluation of Five Waste Minimization Technologies at the General Dynamics Pomona Division: Sulfuric Acid Anodizing, May - 1996, [no author] |
| A Waste Stream reduction Study to Demonstrate the feasibility of Using Glow Discharge Technology to Pre-Treat Metal Surfaces and Eliminate the Hazardous Waste Stream., Jan - 1996, [no author] |
| Solid State Metal Cleaning, Nov - 1996, [no author] |
| Non-Chromate Conversion Coatings and Sealers for Aluminum Alloys, Nov - 1996, [no author] |
| Development of an Environmentally Safe Conversion Coating System for Magnesium, Jan - 1996, [no author] |
| Plasma Process for Pretreatment of Aluminum , May - 1996, [no author] |
| Chromate Recovery from Chromating Rinsewater in the Metal Finshing Industry, May - 1996, [no author] |
| Novel Silane-based Pretreatment of Metals to Replace Chromate and Phosphate Treatments , May - 1996, [no author] |
| Metal Ion Separation from Hazardous Waste Streams by Impregnated Ceramic Membranes, Jan - 1996, [no author] |
| Reduction of Chromium Plating Wastes , May - 1996, [no author] |
| Evaluation of ZERPOL (Zero Liquid Discharge System) at Pioneer Metal Finishing, May - 1996, [no author] |
| Alloy Deposition of Hard Coatings as a Replacement for Chromium, Jun - 1996, [no author] |
| Non-Chemical Surface Preparation, Nov - 1996, [no author] |
| Metal Recovery as Synthetic Mineral Concentrates (from automotive radiator boil-out solutions), May - 1996, [no author] |
| Nickel Recovery from Electroplating Rinse Water by Electrodialysis, May - 1996, [no author] |
| Power Washer With Wastewater Recycling Unit, May - 1996, [no author] |
| Finishing Fabricated Metal Products with Powder Coatings, May - 1996, [no author] |
| Physical Vapor Deposition:
The Technical Process With a Relatively Short Past
& a Long, Exciting Future, Nov - 1996, By Donald M. Mattox |
| Michigan Finisher Provides PVD Coatings
To Extend Wear-life & Corrosion
Resistance For Functional
& Decorative
Applications, Nov - 1996, [no author] |
| Vacuum Coating Helps
This Hardware Manufacturer
"Meet Mother Nature
On Her Own Terms", Nov - 1996, [no author] |
| Physical Vapor Deposition--Wear Resistant and Decorative Coatings, Nov - 1996, Mark Podob |
| Analytically Speaking: Characterization of Deposits,
Coatings & Electroforms ‐ Part III, Nov - 1996, Dr. Rolf Weil |
| Advice & Counsel: Manufacturing TRI Trouble, Nov - 1996, Frank Altmayer |
| Enviroscope: Metal Finishers Increase Profits
With Climate Wise Program, Nov - 1996, Kevin James |
| Electrodeposition of Zn-Fe Alloy from an Acid Sulfate Bath
Containing Triethanolamine, Nov - 1996, V. Narasimhamurthy and B.S. Sheshadri |
| Coprecipitation of Cu(II) & Ni(II) Complexes with Fe(OH)3, Nov - 1996, Ona Gyliene, Mudis Salkauskas and Neringa Vilcinskaite |
| The Metallurgical Structure of Electroless Nickel Deposits:
Effect on Coating Properties, Nov - 1996, R.N. Duncan |
| Circuit Technology, Nov - 1996, James P. Langan |
| Microetch Prior to HASL (hot air solder leveling) [ComplianceNet], Sep - 1996, [no author] |
| Air Emissions from Printed Circuit Manufacturing [ComplianceNet], Mar - 1996, [no author] |
| DISPOSAL OF WASTEWATER EFFLUENT FILTER PAPER [ComplianceNet], Jul - 1996, [no author] |
| Enviro-Conscious Mfg of PCBs [ComplianceNet], Mar - 1996, [no author] |
| Environmental tools available on the Internet [ComplianceNet], Jul - 1996, [no author] |
| EPA PROPOSED HAZARDOUS WASTE IDENTIFICATION RULE (HWIR) [ComplianceNet], Feb - 1996, [no author] |
| Direct Metallization and the Environment, Nov - 1996, John Mukhar |
| Manual - Pollution Prevention in the Paints and Coatings Industry, - 1996, Joseph, Ron |
| Weapon System Environmental, Safety and Health Evaluation - Development Guide for Single Managers, - 1996, US Air Force Materiel Command |
| Field Application of EMI Coatings Investigation of Coating Materials and Stylus Electroplating Protocols for Shielded Facilities, - 1996, Stephenson, L. D.; Donoho, L. H. |
| Abatement of Hazardous Air Pollutant Emissions from Army Chromium Electroplating and Anodizing Operations, - 1996, Hay, K. J. |
| Technical Support for Implementation of Aluminum Ion Vapor Deposition at Tobyhanna Army Depot, - 1996, Hoye, R. and Sinha, R. |
| The Substitution of IVD Aluminum for Cadmium, Phase 3., - 1996, Holmes, V. L. and Reilly, J. J. |
| Analysis of Pollution Prevention Investments Using Total Cost Assessment: A Case Study in the Metal Finishing Industry, - 1996, Causing, Myla and Jensen, Stephen and Haynes, Shawn and Marquardt, Wil |
| Case Study: Hankison International, - 1996, NC DPPEA |
| Safe Use of Chemicals in Electroplating and Related Industries, - 1996, Occupational Health & Safety Service |
| Guidelines for the safe use of chemicals in electroplating and related industries, - 1996, Occupational Safety and Health Service of the Department of Labour |
| The 37th William Blum Lecture, Electroless Plating: The Past is Prologue, - 1996, Dr. Juan B. Hajdu |
| Finisher's Think Tank, Jul - 1995, Marty Borruso |
| Finisher's Think Tank, Jul - 1995, Marty Borruso |
| Finisher's Think Tank, Jul - 1995, Marty Borruso |
| Health and Safety Mail Call, Jul - 1995, Robert F. Lee |
| Reality, Recovery and Recycling: 'Oops!' Did we Do It Right, Jul - 1995, R.W. Phillips III |
| Hydrogen Embrittlement Revisited: Part1, Jul - 1995, Allen W. Grobin |
| Strategies at a Decorative Chromium Electroplating Facility: On-line vs. Off-line Recycling, Apr - 1995, By James P. Lamancusa, P.E., CEF |
| EPA Publishes Final Rule On Chromium MACT Standards, Apr - 1995, Dr. K.C. Yiin |
| Electroless Gold Plating by Disulfiteaurate Complex, Apr - 1995, H. Honma, A. Hasegawa, S. Hotta and K. Hagiwara |
| 101 Ways To Make Pollution Prevention Work, Apr - 1995, James W. DeWitt |
| Microfiltration of Aqueous Cleaner Solutions, Apr - 1995, Dave Peterson |
| Advice & Counsel, Apr - 1995, Frank Altmayer |
| Substrates for Tribological Coatings, Apr - 1995, Donald M. Mattox |
| Experimental Procedure Gelatin Inhibition of a Silver Plating Process, Apr - 1995, O.A. Ashiru |
| Effect of Electroless Nickel Plating On Fatigue Strength of 30CrMoA Steel, Apr - 1995, Y. Wu, Y. Zhang and M. Yao |
| Electrodeposition of Nickel-Polytetrafluoroethylene (PTFE) Polymer Composites, Apr - 1995, G.N.K. Ramesh Bapu and S. Mohan |
| EPA Administrator Carol Browner: Committed to the Industry & to Building a New Generation Of Environmental Protection, Apr - 1995, [no author] |
| Functional and Decorative Nickel-Free Finish, Jan - 1995, Degussa Corp. Frankfort, Germany |
| Parts Drying Made Easy, Feb - 1995, John Durkee, II |
| Measuring Plating Thickness Using XRF, Feb - 1995, Francis Reilly |
| EPA's Degreasing NESHAPs, Feb - 1995, Steve Rizzo |
| Epoxy, Polyester, Acrylic ‐ What's in a Name?, Feb - 1995, Champ Bowden |
| Treating Spent Electroless Nickel Baths, Mar - 1995, Rodney C. Squire |
| Improving Liquid Spray Transfer Efficiency, Mar - 1995, Glen L. Muir |
| An Electropolishing Primer, Mar - 1995, [no author] |
| Making Direct Contact, Mar - 1995, Verh Mehler |
| Keep Solvents In and Workers Out!, Mar - 1995, Tom O'Connor |
| Taking the Mess Out of Paint Booth Cleaning, Mar - 1995, Alfa Laval Separations |
| Plastic Finishing Combines Prime and Finish Coats, Mar - 1995, [no author] |
| A Hassle-Free Switch to Aqueous Cleaning, Apr - 1995, Faye Bentley |
| The State of the Cleaning Market, Apr - 1995, John Durkee, II |
| Painting Plastic Automotive Components Electrostatically, Apr - 1995, James R. Kost |
| Low-VOC Coatings Meet a Wide Range of Needs, May - 1995, Bill Ballway |
| Meeting the Customer's Needs With Zinc-Alloy Plating, May - 1995, Beverly A. Graves |
| How To Safely Select Electric Immersion Heaters, May - 1995, Dennis Rezabek |
| Controlling VOCs in Paint Finishing, May - 1995, Jeff Brooks |
| Converting to an Aqueous Cleaning System, May - 1995, Joann A. Quitmeyer |
| Stripping Paint with Plastic Media, Jun - 1995, Richard Dotson Ralph Ballard |
| Regulations Affecting Aqueous Cleaning Systems, May - 1995, John B. Durkee, II |
| For Light Metal Die Castings, Consider Hard Anodizing, May - 1995, [no author] |
| Fluidized-Bed Paint Stripping at Ford, Jun - 1995, [no author] |
| The Recycle Option, Jun - 1995, John B. Durkee, II |
| Examining the Drying Process, Jun - 1995, Charles Leech, Jr. |
| Closing the Loop on Cleaners, Jun - 1995, Allan P. Fischer |
| Faster Mass Finishing, Jun - 1995, Jeffrey W. McEnemy |
| EPA's New Chromium Emissions Regulations, May - 1995, Lalit Banker |
| Optimizing the Curing Process, Jul - 1995, Peter Witham |
| Proper Spray Equipment Maintenance Saves Money, Jul - 1995, Jerry P. Hund |
| Plating Aluminum Wheels, Jul - 1995, Beverly A. Graves |
| Electrocoat Meets Challenges of Unusual Parts, Aug - 1995, Lyle Gilbert |
| Troubleshooting pH/ ORP Controllers, Aug - 1995, Thomas H. Martin |
| When the POTW Moves In, Aug - 1995, Beverly A. Graves |
| Plater Tries New Bright Nickel Plating System, Sep - 1995, Beverly A. Graves |
| Steelcase Adds Powder Coating, Sep - 1995, Beverly A. Graves |
| Why Is Drying So Hard with Aqueous Cleaning Technology?, Sep - 1995, John Durkee, II |
| Switch to Alkaline Non-Cyanide Zinc Pays Off, Sep - 1995, [no author] |
| Polypropylene Construction Extends Washer Life, Sep - 1995, [no author] |
| Powder Finish Helps Golf Cars Survive the Links, Sep - 1995, [no author] |
| Decorative Finishing Using PVD, Oct - 1995, Brent Lee |
| TABC Eliminates Solvent Emissions, Oct - 1995, James P. Wikenczy |
| Ion Vapor Deposited Coatings for Improved Corrosion Protection, Oct - 1995, Graham Legg |
| PCB Manufacturer Blends High Quality with Quick Response, Oct - 1995, [no author] |
| Non-Metal Conversion Coating, Oct - 1995, [no author] |
| Pollution Control at Monroe Plating, Nov - 1995, [no author] |
| Roy Metal Finishing: A Different Drive, Nov - 1995, Emilie Pazdan |
| The Case for Anode Baskets, Nov - 1995, Gregory Panagiotakis |
| Air Knives Cut Paint Rejects, Nov - 1995, [no author] |
| Blackening System Improves Production, Nov - 1995, [no author] |
| Painting Fire Apparatus, Nov - 1995, Joe Schrantz |
| Resting Easy with Powder Coating, Dec - 1995, [no author] |
| Job Plater Keeps EN Plating Quality High, Dec - 1995, [no author] |
| Masterack Goes Powder, Dec - 1995, [no author] |
| Fundamentals of Mass Finishing, Dec - 1995, William W. Wellborn |
| Troubleshooting the Lamination Process, Jan - 1995, Hal Brown |
| Solution to PCB Drilling, Jan - 1995, Dynamotion Corp.'s Engineering Staff |
| Troubleshooting Depanelization, Jan - 1995, Jerry Murray J. Moran R.A. Kelzer R. Eddy Sr. R. Eddy Jr. C. Herring D. Powers P. Altomare |
| Trouble in Test?, Jan - 1995, Ray Cronin |
| Troubleshooting AOI, Jan - 1995, Greg Blake |
| Backboard, Jan - 1995, Jerry Murray |
| Selecting Core Constructions, Jan - 1995, Doug Sober |
| Optimizing the Ultrathin MLB, Feb - 1995, Bruce Kline |
| Rigid-Flex: a New Method, Feb - 1995, Matt Saari |
| Ultrathins, Feb - 1995, Jerry Murray |
| Controlling Registration, Feb - 1995, Todd Walrich |
| Continuous Lamination, Feb - 1995, Bill Foran |
| A New Paradigm, Mar - 1995, Jack Fisher Gary Brown |
| Business Relationships, Mar - 1995, Jerry Murray |
| Achieving Fabulous Relationships, Mar - 1995, Pamela J. Gordon Jeffrey Kurtz |
| Can Gainsharing Help PCB Manufacturers, Mar - 1995, Mathew Goodfellow Ph.D. |
| Tin-Core PCBs, Mar - 1995, Michael Siegmund |
| Design For The Environment, Apr - 1995, Katherine M. Hart Deborah L. Boger Michael A. Kerr |
| Direct Metallization, Apr - 1995, Michael Carano |
| Reuse...Recover...Recycle, Apr - 1995, Straton G. Tragellis Steven P. Glassman |
| Tomorrow's Tools For The PCB Preproduction, May - 1995, Schmil Dolberg |
| Troubleshooting Gerber, May - 1995, Ralph Martino |
| Focus on Film, May - 1995, Bob Wolfe |
| Preproduction Automation, May - 1995, Charles N. Hahr |
| PTH Measurement Technique, May - 1995, Frank Ferrandino |
| Flex Substrates for MCM-Ls, Jun - 1995, Glenn Gengel |
| Composition, Structure & Hardness of Pulse-plated Nickel-hardened Gold Films , - 1995, G. Holmbom, Industrial Microelectronics Centre, LITH/IFM, Linkoping, Sweden, & B. Jacobson, CEI-Europe, Finspong, Sweden, & J. E. Sundgren, Link"ping Institute of Technology, Linkoping, Sweden |
| Advances in Selective Stripline Plating Technology , - 1995, Steven Antoniou & Michael Hurley, Enthone-OMI, Inc., New Haven, CT, & Eric Zwerner, Electroplating Engineers, S.A. |
| Process Control Maturity in Plating Operations at Hughes Aircraft Company , - 1995, Paul W. Fecsik, CEF, Hughes Aircraft Company, Tucson, AZ |
| Technical Applications &Theoretical Backgrounds of Secondary Electrolysis of Anodized Aluminum Professor , - 1995, Toshihiko Sato & Kyoko Kaminaga, Shibaura Technical University, Tokyo, Japan |
| The Coloration of Anodic Oxide Coatings on Aluminum with Particular Emphasis on the Use of Organic Dyes , - 1995, David Montgomery, CEF, Montgomery Consulting, Waxham, NC |
| Coil Anodizing & Other Things That Go Around,, - 1995, Dr. Joseph H. Manhart, Lorin Industries, North Muskegon, MI |
| Plating Hydrogen? , - 1995, Arthur Wasserman, New York, NY |
| Electrocolor & Integral Color Anodizing of Aluminum Alloys & Impurities , - 1995, Dr. Xavier Albert Ventura, L C Systema Iberica, S. A., Barcelona, Spain |
| Automating Regulatory Compliance for Electroplating Chemicals , - 1995, Stanley J. Janusz, JANUS Environmental Management, Inc., Lavallette, NJ, & Ronald Cohen, Atotech USA, Inc., Somerset, NJ |
| Recycling Plating Wastes into Products C.T. , - 1995, Philipp, P.E., MetWool, Inc., Hot Springs, AR |
| Regulatory Compliance for Metal Finishing Facility Shutdown , - 1995, Dan Poulos & H. Lee Martin, Westinghouse Savannah River Company, Savannah, GA |
| Advanced Techniques for Replacing Hexavalent Chrome Plating , - 1995, Brian Manty & Jack Cavanaugh, National Defense Center for Environmental Excellence (NDCEE), Concurrent Technologies, Inc., Johnstown, PA |
| Process for Recycling Inorganic Hazardous Wastes , - 1995, T. W. Unger, J. C. Odenwelder, J. J. Horstmann & J. M. Hanrahan |
| Flex for Success, Jun - 1995, Jerry Murray |
| Cost-Effective Flex, Jun - 1995, Darryl J. McKenney |
| Measurement/Prediciton of Board Warpage, Jun - 1995, Bill Foran Teresa Gentry |
| Recyclable Technology, Jun - 1995, Victoria R. Allies |
| Fine-Line Technology, Jul - 1995, Bill Foran Jerry Murray |
| Fine-Line Flex Circuitry, Jul - 1995, Joel Yocom |
| Converting to Liquid Resist..., Jul - 1995, Scott Baller |
| Fine-Line Imaging, Jul - 1995, Ken Bridges |
| Between The Lines, Jul - 1995, Rani Cohen |
| Emerging Technologies, Sep - 1995, Jerry Murray |
| Interconnecting Technology, Sep - 1995, James D. Herard Anthony P. Ingraham |
| The Alternative for Process/Materials, Sep - 1995, Dieter Weiss John Phinney |
| Cycle Time Reduction, Oct - 1995, Mike Hills |
| In-House Outsourcing Values, Oct - 1995, Paul Benke |
| Test Labs and Quality, Oct - 1995, Bob Neves |
| Fine-Line Imaging, Oct - 1995, Dr. Karl H. Dietz |
| The Technology of Photoresist Stripping, Nov - 1995, Rudy Sedlak |
| White Oxide, Nov - 1995, Kathleen McNutt |
| Gold Plating on Copper Lands, Nov - 1995, Jerry Murray |
| Proper Panel Plating, Nov - 1995, John Giesfeldt |
| Trouble-Free Etching, Nov - 1995, Marshall Gurian Bill Heisler |
| Low-Cost MCMs, Nov - 1995, Ray Fillion Glenn Forman Ron Kolc Robert Wojnarowski |
| The Decommissioning of a PCB Facility, Nov - 1995, Mohammed Zadeh |
| PCB Solderability, Dec - 1995, Setve Beigle Peter McGraph |
| Solder Balls, Dec - 1995, Sven E. Kramer |
| Solid Solder Deposit, Dec - 1995, Bill Foran |
| A Flexible Alternative, Dec - 1995, W.J. Thatcher P.M. Banks |
| A Tale of the "Mighty Platers" Plating and Sur. Fin. Shop Visit, Jan - 1995, [no author] |
| Powder Can Compete in the Big League for This Canadian Custom Coating Shop Plating and Sur. Fin. Shop Visit, Jan - 1995, [no author] |
| Using Technology to Enhance High-Volume Fastener Plating Plating and Sur. Fin. Shop Visit, Jan - 1995, [no author] |
| Biological Monitoring - A Useful Tool in Metal Finishing , Jan - 1995, Philip Harber, John Treuting and James Dahlgren |
| Electrochemical Cr-Ni-Al2O3 Composite Coatings Part I: Some Aspects of the Codeposition Process , Jan - 1995, O. Berkh, S. Eskin, A. Berner and J. Zahavi |
| Fabrication of Nickel Film on a Glass Disk by Electroless Nickel Plating , Jan - 1995, H. Honma, T. Kosio, S. Hotta and H. Watanabe |
| Morphology and Composition of Electrodeposited Zinc-Manganese Alloys , Jan - 1995, M. Eyraud, A. Garnier, F. Mazeron and J. Crousier |
| Electroless Copper Plating A Review: Part I , Feb - 1995, Cheryl A. Deckert |
| Thin Multilayer Palladium Coatings for Semiconductor Packaging Applications Part I: Solderability , Feb - 1995, I.V. Kadija, J.A. Abys, J.J. Maisano, E.J. Kudrak and S. Shimada |
| Rotating Ring-Disk Studies of Cu Anodes: Effect of Chloride Ions and Organic Additives , Feb - 1995, Sunghee Yoon, M. Schwartz and K. Nobe |
| Electrochemical Cr-Ni-Al2O3 Composite Coatings Part II: Mechanical Properties and Morphology , Feb - 1995, S. Eskin, O. Berkh and J. Zahavi |
| Plating Puts it All Together for Manufacturer of Electrical Components Plating and Sur. Fin. Shop Visit, Feb - 1995, [no author] |
| EPA's Degreasing NESHAPs Companies Have 36 Months to Comply with New Requirements , Feb - 1995, Stephen P. Risotto, Center for Emissions Control, Washington, DC |
| Special Conference Comes to Grips with Hexavalent Chromium , Feb - 1995, James H. Lindsay |
| Empowered Employees Make the System Work at Caribe GE Plating , Feb - 1995, [no author] |
| California Finisher Services Aerospace& Medical/Dental Industries with Quality Anodizing , Mar - 1995, [no author] |
| Perseverance Pays Off with Guinness Book Listing Member Profile, Mar - 1995, Walter P. Alina |
| Products for Health Care Are Priority for Cincinnati Finisher Plating and Sur. Fin. Feature, Mar - 1995, [no author] |
| Electroless Copper Plating, A Review: Part II, Mar - 1995, Cheryl A. Deckert |
| Properties of Bright Tin-Lead Alloy Deposits from Neutral Gluconate Baths , Mar - 1995, T. Sonoda, H. Nawafune and S. Mizumoto |
| Solution Minispangling of Hot Dip Galvanized Sheet Steel, Mar - 1995, Jong-Sang Kim and Jeong-Real Park |
| Relationship Between Initial and Recrystallization Textures of Copper Electrodeposits , Mar - 1995, Dong Nyung Lee, Sooyoung Kang and Jeomsik Yang |
| Aviall's Search for Environmental Safety , Feb - 1995, Paul Muir, Aviall Caledonian Engine Services, Prestwick International Airport, Prestwick, Ayrshire, Scotland |
| LEIID Surface Modification -- A Versatile, Environmentally Friendly Metal Plating Technology, Feb - 1995, Michael Tucker & Donald Weeks, Spectrum Sciences Inc., Santa Clara, CA; & Dr. Ian Brown, Lawrence Berkeley Laboratory, University of California, Berkeley, CA |
| Decorative Finishing Using Physical Vapor Deposition, Feb - 1995, Dr. Brent Lee, Vacuum Plating Technology Corp., San Jose, CA |
| Evaluation of Innovative, Low VOC Industrial Maintenance Coatings, Feb - 1995, Robin Taylor, North Carolina A&T State University, Greensboro, NC; Dean Cornstubble, Research Triangle Institute, & Michael Kosusko, U.S. EPA, Air and Energy Engineering Research Lab |
| Environmental Auditing: Learning from Common Pitfalls & Issues , Feb - 1995, Rick Sarnelli, Raytheon Company, Lexington, MA |
| Metal Analysis Using Anodic Stripping Voltammetry & Microelectrodes , Feb - 1995, R.P. Renz, C.D. Zhou, E.J. Taylor & E. Stortz, Faraday Technology, Inc., Dayton, OH |
| An Introduction to Microfiltration of Aqueous Cleaning Solutions , Feb - 1995, Dave Peterson, Modine Manufacturing, Racine, WI |
| Limitations of Microfiltration , Feb - 1995, Dave Peterson Modine Manufacturing, Racine, WI |
| Isopropyl Alcohol (IPA) Cleaning Technology , Feb - 1995, Anthony Durante, S&K Products International, Chestnut Ridge, NY |
| Recycle of Alkaline Cleaners by Carbon Fiber Composite Membranes, Feb - 1995, Raymond Lechleider, Carbone of America Corp., Parsippany, NJ |
| Zero Discharge Technologies for Aqueous Parts Washing Applications, Feb - 1995, Anthony Fuhrman, U.S. Filter Corporation, |
| 101 Ways to Make Pollution Prevention Work , Feb - 1995, James DeWitt, GZA Environmental, Inc., Vernon, CT |
| Pollution Prevention Training -- Awareness to Implementation , Feb - 1995, Janet Vail, Grand Valley State University, Allendale, MI |
| A Novel Approach to the Metallization of Plated Through-hole Printed Wiring Boards , Feb - 1995, Michael Carano, Electrochemicals, Inc., Youngstown, OH |
| Silver Recovery: Emerging Technologies for Pollution Prevention , Feb - 1995, Diego d'Angelo, ETICAM, Warwick, RI |
| How We Reduced Our Wastewater Discharge from 80,000 gal/day to 0 gal/day & Saved $100,000/year , Feb - 1995, Edwin Ondrick, Zero Discharge Technologies, Inc., Chicopee, MA |
| Strategies at a Decorative Chromium Electroplating Facility: On-line vs. Off-Line Recycling, Feb - 1995, James Lamancusa, CEF, Lacks Enterprises, Inc., Grand Rapids, MI |
| The Treatment of Zinc Cyanide to a Non-hazardous Revenue Stream , Feb - 1995, Jack Dandridge, NuZinc, Inc., Garland, TX |
| New Applications of Electrodialysis Recycling Processes in the Surface Finishing Industry , Feb - 1995, Andreas Deuschle, Osmota Membrantechnik GmbH, Manchingen, Germany |
| Revenue from Waste & Zero Discharge for Anodizing Plants , Feb - 1995, R.C. Furneaux, S.A. Finlayson, G.C. Holywell & N.A. Darby, Alcan International Limited, Banbury, Oxon, England |
| Metals Polishing for End-of-pipe Water Recovery, Feb - 1995, Stanley Karrs, Gary S. Hapach and Joan L. McConahy U.S. Filter Corp., Warrendale, PA |
| Shipping Your Samples -- A Primer on Department of Transportation (DOT) & International Air Transportation Association (IATA) Regulations , Feb - 1995, Jennifer Terbrueggen, Clayton Environmental Consultants, Novi, MI |
| Metal Reclamation from Hazardous Waste, Feb - 1995, Jeff Cohen, Encycle/Texas, Atlanta, GA |
| Maintenance & Recovery of Stripping Solutions, Feb - 1995, Dr. Fred Reinhard, Kinetic Recovery Corporation, Edina, MN |
| The Use of Electrolytic Recovery in Conjunction with Chemical Precipitation--A Case Study of Total Metal Recovery at a Jewelry Production Company , Feb - 1995, Dr. George Hradil & Edward Hradil, Covofinish Co., Inc., North Scituate, RI |
| The Use of Precious-metals-coated Titanium Anodes for Industrial Waste Treatment , Feb - 1995, Chiu Wang, Electrode Products, Inc., Warren, NJ |
| Evaluation of Performance Capabilities & Operational Requirements of Chromium Purification Technologies , Feb - 1995, Jennie Koff & Nicholas Stencel, Naval Facilities Engineering Service Center |
| Waste Minimization Strategic Initiative R&D Program at Eaton Corporation , Feb - 1995, S.R. Schachameyer, J.M. Burke & R. Bauer, Eaton Corporation, Milwaukee, WI |
| A Team Approach to Metals Recycling , Feb - 1995, Gary Bauer, CEF, Pre-Finish Metals, Inc., Walbridge, OH, & Jack Kearney, Hall Chemical Company |
| Flow-through Barrel Plating: A High efficiency System Which Promotes Pollution Prevention & Production Improvement and Water Conservation, Feb - 1995, John Lindstedt, Artistic Plating Co., Inc., Milwaukee, WI; William Yates, Poly Products, Henderson, NV; and Anton Lazaro, Hardwood Line Mfg. Corp., Chicago, IL |
| Pollution Prevention: An Economic Strategy for the Future , Feb - 1995, Marty Borruso, Plating Systems Inc., Staten Island, NY |
| Can Clean, Dry-Coating Technologies Economically Replace Electrolytic Chrome for Wear or Decoration?, Feb - 1995, Keith Legg and George Nichols, BIRL Industrial Research Lab, Northwestern University, Evanston, IL |
| LEIID Surface Modification: A Versatile, Environmentally Friendly Metal Plating Technology , Feb - 1995, Michael Tucker & Donald Weeks, Spectrum Sciences Inc., Santa Clara, CA; & Dr. Ian Brown, Lawrence Berkeley Laboratory, University of California, Berkeley, CA |
| Regenerative Electroless Nickel Technology'An Industrial Case Study, Feb - 1995, Steve Schaefer, LeaRonal Inc., Freeport, NY, & Steve Candiloro, Jr., Epner Technology, Inc., Brooklyn, NY |
| Moving Toward Zero Discharge in a PC Board Shop , Feb - 1995, Stratton Tragellis, Wheelabrator Memtek, Billerica, MA |
| Destruction of Organic-bearing Effluent from Electroless Copper Waste Solutions Using Hydrogen Peroxide in Combination with Ultraviolet Exposure , Feb - 1995, S. Lal, D. Dinella & E.P. Foeckler, AT&T Bell Laboratories, Murray Hill, NJ |
| Metal Analysis Using Anodic Stripping Voltammetry & Microelectrodes , Feb - 1995, R.P. Renz, C.D. Zhou, E.J. Taylor & E. Stortz, Faraday Technology, Inc., Dayton, OH |
| Ozone-depleting Substances: Alternatives Evaluation & Phase-out Implementation'A Case Study Discussion, Feb - 1995, Azita Yazdani, P.E., Pollution Prevention International, Inc., Brea, CA |
| An Introduction to Microfiltration of Aqueous Cleaning Solutions , Feb - 1995, Dave Peterson, Modine Manufacturing, Racine, WI |
| Zero Discharge Technologies for Aqueous Parts Washing Applications Anthony Fuhrman, , Feb - 1995, U.S. Filter Corporation, Warrendale, PA |
| Novel Approach to the Metallization of Plated Through-hole Printed Wiring Boards , Feb - 1995, Michael Carano, Electrochemicals, Inc., Youngstown, OH |
| Silver Recovery-Emerging Technologies for Pollution Prevention , Feb - 1995, Diego D'Angelo, ETICAM, Warwick, RI |
| A Balancing Act Between Off-site & On-site Recycling , Feb - 1995, James Lamancusa, CEF, Lacks Enterprises, Inc., Grand Rapids, MI |
| The Treatment of Zinc Cyanide to a Non-hazardous Revenue Stream , Feb - 1995, Jack Dandridge, NuZinc, Inc., Garland, TX |
| Shipping Your Samples: A Primer on Department of Transportation (DOT) & International Air Transportation Association (IATA) Regulations , Feb - 1995, Jennifer Terbrueggen, Clayton Environmental Consultants, Novi, MI |
| Environmentally Safer Alternatives to Conventional Processes , Feb - 1995, David Jean, Hubbard-Hall, Inc., Waterbury, CT |
| Recycling Metal-Bearing Hazardous Waste , Feb - 1995, Jeff Cohen, Encycle/Texas, Atlanta, GA |
| Successfully Using Fume Suppressants in Chromium Electroplating , Feb - 1995, Dr. Allen Jones, CEF, ATOTECH USA Inc., Somerset, NJ |
| The Use of Precious-metals-coated Titanium Anodes for Industrial Waste Treatment, Feb - 1995, Chiu Wang, Electrode Products, Inc., Warren, NJ |
| Purification of Chromium Electrolytes & Chromate Solution by Means of Membrane Technology , Feb - 1995, Heinz Zengler, JB Technology Applications, Vejle, Denmark |
| Waste Minimization Strategic Initiative R&D Program at Eaton Corporation, Feb - 1995, S.R. Schachameyer, J.M. Burke & R. Bauer, Eaton Corporation, Milwaukee, WI |
| Electroplating Facility Assessments to Identify Opportunities to Improve Efficiency & Reduce Waste , Feb - 1995, Christine Hayes, Hazardous Waste Research & Information Center; Gary Miller, Hazardous Waste Research & Information Center; Richard Lanyon, Metropolitan Water Reclamation District of Greater Chicago |
| A New Flow-through Plating Barrel Design for Pollution Prevention & Production Improvement , Feb - 1995, John Lindstedt, Artistic Plating Co., Inc., Milwaukee, WI; William Yates, Poly Products, Henderson, NV; and Anton Lazaro, Hardwood Line Mfg. Corp., Chicago, IL |
| The Effect of Electrolyte on the Anodized Finish of a Magnesium Alloy , May - 1995, T.F. Barton and C.B. Johnson |
| Use of a Spreadsheet-Based Computer Program to Calculate Chemical Additions and Implement a Feedback Control System , May - 1995, M.R. Eckstein and C.P. Bowers |
| Technical Brief: pH Probes--Taken for Granted , May - 1995, Samy Y. Morcos, CEF |
| Electrodeposition of Zinc-Cobalt Alloys from a Chloride Bath, May - 1995, Jing-shuang Zhang, Zhelong Yang, Maozhong An, Wenliang Li and Zhenmi Tu |
| The Compact Disc & the Surface Finishing Community--Opportunities for High Definition Electroforming, May - 1995, H. Vincent Reynolds |
| Limitations of Microfiltration , May - 1995, Dave Peterson |
| Revenue from Waste & Zero Discharge from Anodizing Plants , May - 1995, R.C. Furneaux, S.A. Finlayson, N.A. Darby, T. Miyashita, B.R. Ellard and G.C. Holywell |
| Recovery, Reclamation & Recycling of Water-Washed Overspray Paint , Jul - 1995, George M. Mitchell and John M. Spangler |
| Rx: Managed Care Facility for "Dirty" Industries , Jul - 1995, Jack MacSwan |
| Practical Application of HVOF Thermal Spray Technology for Navy Jet Engine Overhaul & Repair , Jul - 1995, Donald S. Parker |
| Total Quality Management: Titanium Supplier Turns Talk into Action , Jul - 1995, [no author] |
| Electroplating of Copper from a Non-cyanide Electrolyte , Jul - 1995, R.M. Krishnan, M. Kanagasabapathy, Sobha Jayakrishnan, S. Sriveeraraghavan, R. Anantharam and S.R. Natarajan |
| Review of "Direct Plate" Processes and Assessment of the Impact on Primary Imaging of Printed Wiring Boards , Jul - 1995, Karl H. Dietz |
| Corrosion Behavior of Electrogalvanized Steel Plated Under Static and Rotational Conditions , Jul - 1995, A.Y. Hosny, M.E. El-Rafey, S.H. Kandil and Y.A. El-Samadisy |
| Characteristics of Nickel-Boron Nitride Electrocomposites , Jul - 1995, G.N.K. Ramesh Bapu |
| Metal Finishing and the Environment: Is the Surface Finishing Industry Really "Bad" or Just Misunderstood and Maligned? , Aug - 1995, Mark A. Hanson |
| A Perspective on Environmental Goals & How Science & Technology Can Help Achieve Them , Aug - 1995, Frank Altmayer |
| Using Material Balances to Improve the Design of Electrolytic Degreasing Plants , Aug - 1995, C.A. de Ritter and C. Coutin/Robert |
| Application of the Rotating Cylinder Hull Cell to the Measurement of Throwing Power and the Monitoring of Copper Plating Baths , Aug - 1995, C. Madore, D. Landolt, C. Hassenpflug and J.A. Hermann |
| Colorado Lock Manufacturer Equates Quality with Security Plating and Sur. Fin. Shop Visit, Oct - 1995, [no author] |
| Reliable Plating Works, Inc.--Exemplary Milwaukee Job shop Expands Facility & Products Plating and Sur. Fin. Shop Visit, Oct - 1995, [no author] |
| Effect of Microstructure of Ferrous Substrate on Porosity of Electroless Nickel Coating , Oct - 1995, Leena Das, Der-Tau Chin, R.L. Zeller and G.L. Evarts |
| Metal Recovery from Spent Electroless Plating Solutions by Oxalate Precipitation , Oct - 1995, O. Gyliene and M. Salkauskas |
| Electrodeposition of Ni-Mo-P Alloy Coatings , Oct - 1995, Yue Zeng, Suwei Yao and Hetong Guo |
| Relationship Between Texture and Surface Morphology of Copper Electrodeposits , Oct - 1995, S. Kang, J-S. Yang and D.N. Lee |
| EPA's New Approach to Environmental Protection for the Metal Finishing Industry: The Common Sense Initiative , - 1995, Robert S. Benson, Office of Policy, Planning & Evaluation, U.S. EPA, Washington, DC |
| The Common Sense Initiative from a Jobshop Owner's Perspective , - 1995, B.J. Mason, Mid-Atlantic Finishing Co., Capitol Heights, MD |
| Barriers to Pollution Prevention in Metal Finishing , - 1995, Frank Altmayer, CEF (AESF's Technical Director), Scientific Control Laboratories, Inc., Chicago, IL & Peter Gallerani, CEF, Integrated Technologies, Inc., Danville, VT |
| Risk Management Policy: The 104th Congress , - 1995, William Sonntag, NAMF/AESF/MFSA Government Relations Office, Washington, DC |
| Detailed Efficiency Studies of Acid Copper Using the Quartz Crystal Microbalance , - 1995, Kay Kanazawa, IBM Almaden Research Center, San Jose, CA, & G. L. Borges & Dr. Saad Doss, IBM Corporation, San Jose, CA |
| Energy Dispersive X-Ray Fluorescence Applications in the Surface Finishing Industry , - 1995, Azucena R. Overman, ASOMA Instruments, Inc., Austin, TX |
| Structural Peculiarities and Selective Solution of Electrodeposited Zinc-Cobalt Alloys , - 1995, Dr. I. G. Zhihareva & A. I. Zhihareva, Tjumen State Oil & Gas University, Tjumen, Russia |
| Automatic Control of Chromium & Copper Electroplating , - 1995, Tadeusz Hepel, Miroslaw Hepel & Joseph Wiejak, ELCHEMA, Pottsdam, NY |
| Effect of Microstructure of Ferrous Substrate on Porosity of Electroless Nickel Coating (AESF Project 90) , - 1995, Leena Das & Professor Der-Tau Chin, Clarkson University, Potsdam, NY & Dr. Robert L. Zeller & Gerry L. Evarts, CEF, OxyChem Technology Center, Grand Island, NY |
| Electrodeposition of Fe-Ni-SiO2 Alloys Resistant to Corrosion , - 1995, S.N. Popova, M. Ramusubramanian, B.N. Popov & Dr. R.E. White, University of South Carolina, Columbia, SC and K-M. Yin, Yuan-Ze Institute of Technology, Neili, Taoyuan, Taiwan |
| A Mathematical Model for Electrodeposition of Fe-Ni-SiO2 Composites M. Ramusubramanian, , - 1995, S.N. Popova, B.N. Popov & Dr. R.E. White, University of South Carolina, Columbia, SC and K-M. Yin, Yuan-Ze Institute of Technology, Neili, Taoyuan, Taiwan |
| Interface with the Substrate of High Phosphorus Electroless NiP & NiCuP Deposited from Non-ammonia Alkaline Solutions , - 1995, E. Valova & S. Armyanov, Institute of Physical Chemistry, Bulgarian Academy of Sciences, Sofia, Bulgaria; & J.L. Delplancke & R. Winand, Universite Libre de Bruxelles, Bruxelles, Belgium; & O. Steenhaut & J. Vereecken, Vrije Universteit Brussels, Belgium |
| The Ultimate Alternative , - 1995, Bob Brookshire, Brooktronics Engineering Corporation, Laurel, MD |
| Selective Brush Plating Applications for Shaft Repair , - 1995, David Crocker & Jeff Hurrell, Brooktronics Engineering Corp., North Hollywood, CA |
| Brush Plating Safety , - 1995, Tom Jarrett, Jarrett Associates |
| Brush Electroplating Hard Chromium (Trivalent) , - 1995, Beldon Hutchinson, Liquid Development Company, Cleveland, OH |
| The Application of a Special Coating Using the Electrochemical Metallizing Process , - 1995, Jone M. Rodgers, Metallize Illinois, Inc., Vandalia, IL |
| Business & Government: A Successful Partnership , - 1995, LaRonda V. Bowen, South Coast Air Quality Management District |
| Applying Common Sense , - 1995, Dr. Rebecca Spearot, P.E., Clayton Environmental Consultants, Novi, MI |
| A Novel Process for Selectively Metallizing Ceramic Substrates , - 1995, Dr. Henry Law, T.C. Wu & M.D. Evans, AT&T Bell Laboratories, Murray Hill, NJ |
| Thickness Distribution Control of Electrodeposited Nickel Pads for Microelectronic Interconnections , - 1995, M. Svensson & G. Holmbom, Industrial Microelectronics Centre, Linkoping, Sweden |
| Silver Interconnections for Microelectronics , - 1995, Professor F. Stepniak, P. Kohl & S. A. Bidstrup, Georgia Tech, Atlanta, GA |
| Thin Multilayer Coatings for Advanced Processing of Electronic Packages , - 1995, Dr. Igor V. Kadija & Dr. Joseph A. Abys, AT&T Bell Laboratories, Inc., Murray Hill, NJ |
| Au Microstructure & the Functional Properties of Ni/Au Finishes on Ceramic IC Packages , - 1995, Earl D. Winters, Quakertown, PA, & William K. Baxter (Coors Electronic Package Company), Meco, Inc., Rock Hill, SC, & David N. Braski & Thomas R. Watkins, Oak Ridge National Laboratory, Oak Ridge, TN |
| Effects of Non-Uniform Microdistribution of the Components of Electrodeposited Alloys on the Properties of the Coatings , - 1995, Valeri I. Kharlamov, Tigran A. Vagramyan & Professor Sergei S. Kruglikov, Mendeleyev University of Chemical Technology, Moscow, Russia |
| Industrial Applications of Nanocrystalline Electrodeposits , - 1995, Ramin Rofagha & D. Wood, Nanometals Corporation, London, Ontario, Canada, & U. Erb, Queens University, Kingston, Ontario, Canada |
| Electrodeposition & Corrosion Resistance of Zn-Ni-Cr Alloy Coatings , - 1995, Dr. M. El-Sharif, Y Su & C. U. Chisholm, Glasgow Caledonian University, Glasgow, Scotland |
| Zinc Alloy Plating for Corrosion Protection , - 1995, Prof. Dr. W. Paatsch & W. Kautek, Bundesanstalt fur Materialforschung und Prufung, Federal Institute of Materials Research and Testing (BAM), Berlin, Germany |
| Electrodeposition & Characterization of Ni-Co-P-BN Dispersion Coatings , - 1995, Dr. Naoji Furukawa, Kazuhiro Uchiyama, Kunio Nakayama, University of Osaka Prefecture, Osaka, Japan, & Dr. Tadao Hayashi, Japan |
| Zinc Electroplating , - 1995, Louis Candeil, L. C. Systeme, Toulouse, France |
| Compositionally Modulated Alloy Synthesis by Electrochemical Deposition , - 1995, M. R. Kalantary, G. D. Wilcox & D. R. Gabe, Loughborough University of Technology, Leicestershire, UK |
| Surface Finishing Technologies of Aluminum Building Materials in Japan, - 1995, Toshihiko Sato & Kyoko Kaminaga, Shibaura Technical University, Tokyo, Japan |
| Vocational Education & Training in Aluminum Finishing , - 1995, Dr. Arthur Brace, Aluminum Finishing Consultant, Stonehouse, Glos., England |
| Anodizing Breakthrough: Changing an Art to a Science , - 1995, Charles Grubbs, CEF, METALAST International, Inc. |
| Fast Anodizing of Aluminum Piston Heads , - 1995, Jay Safrany & M. Santarini, Pechiney Research Center, Voreppe, France |
| Properties & Side Effects of Commonly Used Sealing Methods for Architectural Anodized Aluminum , - 1995, Scott Wojciechowski & Patrick A. Scalera, CEF, Parker + Amchem, Madison Heights, MI |
| How to Use "Casting for Surface Finishing" (CSF) on Sand Cast Aluminum Alloys , - 1995, Dr. Anne D. Juhl, M. Sc. & Dr. Per M'ller, The Technical University of Denmark, Lyngby, Denmark & Dr. Leif H'jslet Danish Technological Institute, Tastrup, Denmark |
| New Attractive Finishes for Architectural & Decorative Anodized Aluminum , - 1995, Walter Dalla Barba, Italtecno S.R.L., Modena, Italy |
| Palladium-Nickel Plated Lids for Frame Lid Assemblies for IC Packaging Applications , - 1995, Dr. Irina Boguslavsky, Dr. J. A. Abys & E. J. Kudrak, AT&T Bell Laboratories, Inc., Murray Hill, NJ, M. Williams, Williams Advanced Materials, Inc., Buffalo, NY |
| Desorption of Hydrogen from Palladium Electrodeposits , - 1995, Dr. I-yuan Wei, AMP. Inc., Harrisburg, PA & Jerry Brewer, Atotech USA, State College, PA |
| Removal of Cyanide by Ferrate(VI) Ion , - 1995, Dr. Virender K. Sharma, Texas A&M University, Corpus Christi, TX, & Jeremy Smith, CEF, Corpus Christi Army Depot, Corpus Christi, TX |
| Metal Recovery with a Novel Electrode , - 1995, Chengdong Zhou, E. C. Stortz, E. J. Taylor & R. P. Renz, Faraday Technology, Inc., Dayton, OH |
| Theoretical & Applied Aspects of Using Electroflotation Method for Wastewater Treatment in the Surface Finishing Industry , - 1995, Dr. V. A. Kolesnikov & Dr. V. N. Kudryavtsev, Mendeleyev University of Chemical Technology of Russia, Moscow, Russia |
| The Physico-mechanical Properties of Chromium Coatings from Cr(III) Baths , - 1995, Dr. V. N. Kudryavtsev, S. Maksimenko & O. Savanko, Mendeleyev University of Chemical Technology of Russia Moscow, Russia, & Steven Schachameyer, Eaton Corporation, Milwaukee, WI |
| Savings of Precious Metals in Reel-to-Reel Applications , - 1995, Peter Wingenfeld, Demetron GmbH, Schwabisch Gmund, Germany |
| Nickel Coatings & Electroforming Using Pulse Reversal Plating , - 1995, Peter T. Tang, M.Sc., Henrik Dylmer, B.Sc.,& Dr. Per M'ller, Centre of Advanced Electroplating, Lyngby, Denmark |
| Prospects & Practical Applications of the LIGA Technique , - 1995, H. Lowe, IMM Institute of Microtechnology, GmbH, Mainz, Germany |
| Internal Stress in Pulse-plated Tin/Zinc Alloys , - 1995, J. Rasmussen, The Centre of Advanced Electroplating, The Technical University of Denmark, Lyngby, Denmark |
| Recovery of Copper from Rinsewater After Electroplating , - 1995, Prof. Dr. Hab. Jan Przyluski, A. Darkowski and M. Gabryszewski, Warsaw University of Technology, Dept. of Chemistry, Warsaw, Poland |
| Lead Solders vs. Lead-free Solders Sherwood , - 1995, Skip Cassell, Ames Metal Products Co., Chicago, IL |
| Surface Finish for Electronic Packaging with Lead-Free Solders , - 1995, Dr. Igor V. Kadija, M. T. McCormack & Dr. Joseph A. Abys, AT&T Bell Laboratories, Inc., Murray Hill, NJ |
| Low-Cost Solderable Finish for Lead-Free Solders , - 1995, Dr. Henry Law, M. McCormack, T.C. Wu, Y. Degani & S. Jin, AT&T Bell Laboratories, Murray Hill, NJ |
| New Application of the SERA Method Assessment of the Protective Effectiveness of Organic Solderability Preservatives , - 1995, Dr. Peter Bratin, Michael Pavlov, Dr. Gene Chalyt & Rita Gutzman, ECI Technology, East Rutherford, NJ |
| Guidelines for the Successful Use of Tin Plate on Connector Contacts , - 1995, Edward M. Bock, Jr., AMP, Inc., Harrisburg, PA |
| New Approach to Industrial Environmental Protection (II) , - 1995, H. "Lee" Martin, Westinghouse Savannah River Co., Aiken, SC |
| New Advances in Membrane Biotechnology Systems , - 1995, Peter Downing, Zenon Environmental Systems, Inc., Ann Arbor, MI |
| Polymer Filtration: A New Technology for Selective Metals Recovery , - 1995, Dr. B. F. Smith, T. W. Robinson, M. E. Cournoyer, K. Wilson & N. N. Sauer, Los Alamos National Laboratory, Los Alamos, NM |
| How Product Stewardship Will Become a Major Driving Force Behind Chemical Program Selection in the Future , - 1995, K.E. Lampert, Nalco Chemical Company, Naperville, IL |
| Meeting the New Chromium Air Emissions Standards with T-BACT, - 1995, Thomas E. Miles, Conserve Engineering Company, Laguna Beach, CA |
| Benefits of Organometallic Compounds in Waste Treatment , - 1995, Rick Painter, Pavco, Inc., Cleveland, OH |
| Heavy Metals Removal with Microfiltration/Backpulse Technology , - 1995, Dr. Ernest Mayer, DuPont Engineering, Wilmington, DE |
| A Practical Tool for Source Reduction in Electroplating Plants , - 1995, Y.L.Huang and K.Q. Luo, Department of Chemical Engineering, Wayne State University, Detroit, MI |
| A Primer on OSHA's CD-ROM (Single, Double, or Triple No matter how you spin it, it's all regulatory to me!)), - 1995, Lucas J. Forschler & Martha S. Martin, CEF, Delta Chemicals & Equipment, Inc., Indianapolis, IN |
| Demystifying Environmental Management: ISO 14000 (I) , - 1995, Dr. Paul Piplani, Piptech Corporation International, Tulsa, OK |
| International Environmental Standards, - 1995, Christopher Bell, Jim Connaughton & Tom Echikson, Sidley & Austin, Washington, DC |
| How Will EPA Apply ISO-14000 to Metal Finishers? , - 1995, Jim Horne, Office of Waste Management, U.S. EPA, Washington, DC |
| Overview of PVD Processing & Applications , - 1995, Donald M. Mattox, Society of Vacuum Coaters, Albuquerque, NM |
| PVD Coatings for Wear Protection of Gears & Other Engineering Components , - 1995, M. Graham, P. Chang, K.O. Legg & P. Rudnik, BIRL, Northwestern University, Evanston, IL |
| Magnetron Sputtering Sources , - 1995, David A. Glocker, Isoflux, Inc., Rush, NY |
| Large-Scale Magnetron Sputtering of Chromium/Platinum Films on Razorblade Edges , - 1995, Richard DeVito, The Gillette Corporation, Boston, MA |
| Ion-Vapor-Deposited Coatings for Improved Corrosion Protection , - 1995, G. T. Legge, Abar Ipsen Industries, Bensalem, PA |
| A Brief, Non-technical Review of Indium-Tin Oxide Coatings , - 1995, Michael A. Hansen, Consultant, Holland, MI |
| Thin Film Technology vs. Economics , - 1995, George C. Lane, American Vacuum Press, Danbury, CT |
| Substrate Effect on Breakdown of Hard Anodic Films for Application in Electronics , - 1995, S. K. Jalota & D. Mahullkar, Olin Corporation, Wallingford, CT |
| Metallization of Polypyrrole Films, Part II: Electrodeposition of Copper , - 1995, Maria Hepel and Yi-Ming Chen, State Univ. of New York,Potsdam, NY |
| Review of "Direct Plate" Processes & Assessment of the Impact on Primary Imaging of Printed Wiring Boards , - 1995, Dr. Karl H. Dietz, DuPont Electronics Technology Center, Research Triangle Park, NC |
| Technology Assessment Forum on Direct-Plate Processes Chairman: , - 1995, Dr. Chwan Wang, AT&T Microelectronics, Richmond, VA |
| Will Ergonomics Guidelines Affect Metal Finishers? , - 1995, Dr. Roger Stephens, Office of Ergonomics, U.S. Department of Labor, Washington, DC |
| Cancer Risk Associated with Environmental & Occupational Exposure to Chromium, - 1995, Dr. William Butler, McClaren Hart Environmental Engineering Corporation, Alameda, CA |
| Using ISO as a Quality Model , - 1995, Bud Gookins, Elyria Plating Corporation, Elyria, OH |
| Life After ISO-9000 Certification: Process Improvement Must Continue , - 1995, Dr. Paul Piplani, Piptech Corporation International, Tulsa, OK |
| Who Needs to Know About Your Company's Environmental Liability?, - 1995, John S. Vishneski III, Keck, Mahin & Cate, Chicago, IL |
| Recovery, Reclamation & Recycling of Water-Washed Overspray Paint (II) , - 1995, John M. Spangler & George M. Mitchell, Caterpillar, Inc., E. Peoria, IL |
| On-Line Electrochemical Monitoring of Waste & Rinsewater Streams , - 1995, Dr. Peter Bratin, Kh. Brainia, Dr. E. Chalyt, R. Khanina, M. Pavlov, N. Stojko, E. Izro, A. Ivanchenko & R. Gluzman, ECI Technology, East Rutherford, NJ |
| Closed-Looping of Industrial Washers (I) , - 1995, Richard W. Phillips III, RWP Enterprises, Inc., Chatham, VA |
| Closed-Looping of Industrial Washers (II) , - 1995, Richard W. Phillips III, RWP Enterprises, Inc., Chatham, VA |
| Environmental Risk Insurance: You Can Count On It , - 1995, Eugene R. Anderson, Anderson, Kill, Olick & Oshinsky, P.C., New York, NY |
| Control of Defense & Settlement: Insurance Company or Policyholder? , - 1995, Eugene R. Anderson, Kill, Olick & Oshinsky, P.C., New York, NY |
| Dip-Spin Coating Technology for the Electroplater , - 1995, Dean Decker, Spring Tools Co., Schoolcraft, MI & Barbara Strelow, Whitford Corp. |
| The Effect of Nickel Salts on Electroless Nickel Plating , - 1995, Konrad Parker, Consultant, Park Ridge, IL |
| Recent Improvements in an Electroless Gold Plating Bath That Uses Ascorbic Acid as a Reducing Agent , - 1995, Dr. Masaru Kato, Yutaka Yazawa, & Yutaka Okinaka, Kanto Chemical Co., Inc., Sooka-city, Japan |
| Half-Reaction Rates in a High-Temperature Ni-P Autocatalytic Plating Bath Douglas , - 1995, T. Mughogho & S. Walter Orchard, University of the Witwatersrand, Wits, South Africa |
| Microwave Heating for Electroless Electrolytes , - 1995, Prof Dr. Andreas Moebius, LPW Aulager, Neuss, Germany |
| Regenerative Electroless Nickel Technology: An Industrial Case Study , - 1995, Steve Schaefer, LeaRonal, Freeport, NY & Steve Candiloro, Epner Technology, Inc., Brooklyn, NY |
| Electrochemical Passivation of Stainless Steel Tanks for Electroless Plating , - 1995, Ronald N. Duncan, Palm International, Inc., LaVergne, TN |
| Update on the Performance of Open-Top Tumbling Units as Replacements for Barrels in Batch Plating , - 1995, Robert F. Zecher, Tumbleveyor, Inc., Huntingdon Valley, PA |
| Selecting an Appropriate Accelerated Test Method , - 1995, Cynthia L. Meade, Singleton Corporation, Cleveland, OH |
| Surface Treatment of Powder Metallurgical Compacts , - 1995, Dr. Robert C. Leu, Dr. Per M'ller & Dr. Peter Leisner, Centre of Advanced Electroplating, The Technical University of Denmark, Lyngby, Denmark |
| Automating a Jobshop's High Production, Multiprocess Lines, - 1995, Greg Arneson & Troy Brown, Geotronics of North America, Itasca, IL |
| Investigations of an Alternative Surface Cleaning Process for Conversion Coatings , - 1995, M. Lee, S. Ramamurthy & N. S. McIntyre, Surface Science Laboratory, The University of Western Ontario, Western Science Center, London, Ontario |
| Quick-charge Lead-acid Battery Sheet Made by the Electroforming Method , - 1995, Miu Wah-sing, Industrial Centre of the Hong Kong Polytechnic University |
| Alternatives for Nitric Acid to Strip Rack Tips , - 1995, Steven W. Erwin, David L. Ousterling & Richard O. Watson, CEF, Benchmark Products, Inc., Indianapolis, IN |
| Characteristics of Thick Chromium Coatings Produced by High-Speed Electrodeposition , - 1995, Dr. M. El-Sharif, S. Ma & C.U. Chisholm, Glasgow Caledonian Univ. |
| Measuring Using a Laser Micrometer or Photomicrograph , - 1995, Clarence H. Peger, Hard Chrome Plating Consultants, Inc., Cleveland, OH |
| Porous Nickel Electrode Carrier:Electrodeposition by Pulse Current , - 1995, W.S. Miu, P. Lau & C.Y. Peng, The Hong Kong Polytechnic University, South China Science & Technology University |
| Decorative Chromium & Cadmium Substitutes , - 1995, George Shahin, CEF, Atotech USA, Somerset, NJ |
| Chemistry of Chromium , - 1995, N.V. Mandich, HBM Engineering Co., Lansing, IL |
| Pitfalls & Traps on the Road to ISO 9002 Registration , - 1995, Richard W. Strachan, CEF-SE, The International Metals & Chemicals Group, Shelby, NC |
| The Manager's Role in Preparing for Compliance with New Air Quality Regulations: Caught in the Middle ( I) , - 1995, Ronald E. Baylor, Miller, Canfield, Paddock & Stone P.L.C., Kalamazoo, MI |
| Management Techniques for Maintaining a Quality Surface Finish Through the Buffing Process , - 1995, William Schaffner, Schaffner Manufacturing Company, Inc., Pittsburgh, PA |
| Take Time to Manage , - 1995, Mike Stewart, Process Technology, Mentor, OH |
| Filtration and Agitation as Tools to Improve Quality in Finishing , - 1995, Jack Berg, SERFILCO, Ltd., Northbrook, IL |
| Things That Make Life Better in the Lab and Plating Line , - 1995, Yair Assaf, Bohak Plating Co., Ltd., Hollon, Israel |
| Production Line Wastewater, Secondary Containment--RCRA vs. Clean Water Act , - 1995, Daniel R. Kopplin, S.K. Williams Co., Wauwatosa, WI & Donald P. Gallo, Esq., Michael Best & Friedrich, Milwaukee, WI |
| Advice and Counsel, Sep - 1995, Frank Altmayer |
| Circuit Technology: Verifying Solderability, Sep - 1995, James P. Langan |
| Enviroscope: Legislation is Changing the Course of Environmental Regulations, Sep - 1995, Bill Sonntag |
| Finisher's Think Tank, Sep - 1995, Marty Borruso |
| Hands On: Good Practices Get Good Results, Sep - 1995, Mark Zahn |
| Standards Topics: Report on ISO/TC 107 Meetings at SUR/FIN 95 & NIST, Sep - 1995, Allen W. Grobin |
| SVC Topics: Reflecting Coatings by PVD, Sep - 1995, Donald M. Mattox |
| Rotating Electrodes for Use in Electrodeposition Process Control (The 36th William Blum Lecture), Sep - 1995, Dr. David R. Gabe |
| Adhesion & Corrosion Performance Of Nanocrystalline Ni Coatings, Sep - 1995, A.M. El-Sherik and U. Erb |
| ChromeTech Newsletter, Winter 1995, - 1995, Larry Zitko |
| Special Conference Deals With Cadmium Alternatives, Oct - 1995, James H. Lindsay |
| Metal Finishing Industry Market Survey 1993-1994 Executive Summary, Oct - 1995, Surface Finishing Market Research Board |
| Circuit Technology: Streamlining PWB Manufacturing, Oct - 1995, James P. Langan |
| Enviroscope: EPA's Proposed Water Standards For Metal Products and Machinery (MP&M) Industries Raise Concerns for Surface Finishers, Oct - 1995, Dr. Paul Piplani |
| Finishing Topics: Electrodeposited Aluminum, Oct - 1995, Mike McChesney |
| Finisher's Think Tank, Oct - 1995, Marty Borruso |
| Standard Topics: Hydrogen Embrittlement Revisited, Part II, Oct - 1995, Allen Grobin |
| PVD Processes: Optically Transparent, Electrically Conductive Oxide Thin Films, Oct - 1995, Donald M. Mattox |
| Advice and Council: Chromium MACT-Part II, Mar - 1995, Frank Almayer |
| Finisher's Think Tank, Mar - 1995, Marty Borruso |
| Pretreatment and Organic Finishing: Watch for Warning Signals, Mar - 1995, R. W. Phillips, Jr. |
| PVD Processes: Characterization of Surface Morphology, Mar - 1995, Donald M. Mattox |
| Rapid Determination of Divalent Tin In Alkaline Tin-Plating Solution by Direct Potentiometry, Jun - 1995, A. Leung, G. Chen and D. Huang |
| Commercial Appliance Manufacturer Sets New Standards ‐ Inside & Out, Jun - 1995, [no author] |
| Chloride Zinc Plating is Jobshop's Specialty; Educating Customers Firms Relationships, Jun - 1995, [no author] |
| How to Enhance Your Credibility With Compliance Officials, Jun - 1995, Thomas H. Martin, CEF |
| Advice and Council: Metal Products & Machinery Rule, Jun - 1995, Frank Altmayer |
| Finishers' Think Tank, Jun - 1995, Marty Borruso |
| Pretreatment and Organic Finishing: Water, Water Everywhere, Jun - 1995, R. W. Phillips |
| SVC Topics: Plasma Chemistry & PVD Processes, Jun - 1995, Donald M. Mattox |
| A Protective-Decorative Chemical Conversion Film Of Si-Mo Heteropoly Acid on Steel, Jun - 1995, By J.L. Fang, J.K. Wang, T.Q. Liu and Y. Wu |
| Hydrogen in Electrodeposited Tin-Zinc Alloy, Jun - 1995, V.S. Vasantha, M. Pushpavanam & V.S. Muralidharan |
| Health and Safety: Conducting Safety Audits, Jun - 1995, Vicki P. Sherwood |
| Office Equipment Manufacturer Increases Production With Automated Plating Hoist, Jun - 1995, [no author] |
| Enviroscope: LDR Exclusion for Laboratory Wastewaters, Feb - 1995, Hollis "Lee" Martin |
| Pretreatment and Organic Finishing: Too Much of a Good Thing Can Be Costly, Feb - 1995, R.W. Phillips Jr. |
| Standard Topics: Hydrogen Embrittlement Standards, Feb - 1995, Allen W. Grobin, Jr. |
| SVC Topics: PVD Process 39: Process Documentation, Feb - 1995, Donald M. Mattox |
| EnviroscopeL Athe Aerospace NESHAP as it May Apply to Electroplaters & Surface Finishers, May - 1995, Jeffrey Lord |
| Circuit Technology: Selective Coatings, May - 1995, James P. Langan |
| Finisher's Think Tank, May - 1995, Marty Borruso |
| Advice and Council: What's Decorative and What's Not, May - 1995, Frank Altmayer |
| Hands On: The Whys and Hows of Waste Treatment, May - 1995, Mark Zahn |
| Health and Safety: OSHA Sets Policy On Employee Rescue Efforts, May - 1995, Martha Martin |
| Pretreatment and Organic Finishing, May - 1995, R.W. Phillips Jr. |
| PVD Processes: Cleaning With CO 2, May - 1995, Donald M. Mattox |
| Finishing Facts, July - 1995, [no author] |
| Advice and Council: The Regulations Just Keep Coming, July - 1995, Frank Altmayer |
| Circuit Technology: Changing PWB Technology, July - 1995, James P. Langan |
| Enviroscope: Speaking Out for Common Sense, July - 1995, Hollis Martin |
| Hands On: Chromate Conversions, July - 1995, Mark Zahn |
| Health and Safety, July - 1995, Robert F. Lee |
| Electrodeposited Ni-P-SiC Composite Coatings, Nov - 1995, O. Berkh, A. Bodnevas and J. Zahavi |
| Effects of Additive Agents on the Kinetics Of Tin Electrodeposition from An Acidic Solution of Tin(II) Sulfate, Nov - 1995, G.-S. Tzeng |
| Advice and Council: The State of the "Union", Nov - 1995, Frank Altmayer |
| Circuit Technology: PCMIAs, Nov - 1995, James P. Langan |
| Finishers' Think Tank, Nov - 1995, Marty Borruso |
| 1995 Legislative Conference Was a Success at All Levels, Nov - 1995, Marc Himmelstein |
| Health and Safety: OSHA Inspection Planning and Response, Nov - 1995, Robert F. Lee |
| Pretreatment and Organic Finishing: Who Cares?, Nov - 1995, R.W. Phillips |
| Standards Topics, Nov - 1995, Allen. W. Grobin, Jr. |
| SVC Topics: Ideal Gas Law, Nov - 1995, Donald M. Mattox |
| Leveling in Pulse Plating with Brighteners: Synergistic Effect of Frequency and Hydrodynamically Active Additives, Nov - 1995, M. S. Aroyo |
| Friction and Wear Characteristics Of Electrodeposited Copper Composites, Nov - 1995, V. Bhalla, C. Ramasamy, N. Singh and M. Pushpavanam |
| Jewelry Manufacturers & Platers— Working Together to Engineer a Quality Finish, Nov - 1995, Michael Akkaoui |
| Segmented Porous Electrode Flow Reactors For the Electrochemical Treatment of Commingled Metal Plating Wastes, Dec - 1995, R. Suzuki, W-H. Li, M. Schwartz and K. Nobe |
| Replacing 1,1,1-Trichloroethane With Other Chlorinated Solvents Replacing 1,1,1-Trichloroethane With Other Chlorinated Solvents, Dec - 1995, Vicki L. Rupp & Janet C. Hickman |
| Advice and Council: EPA Official Responds to MP&M Column, Dec - 1995, Frank Altmayer |
| Health and Safety: Confined Space Entry, Dec - 1995, Britt E. Allgood |
| Enviroscope: Pollution Prevention Technology Transfer Resources, Dec - 1995, Hollis "Lee" Martin, |
| Pumping Up Production At a Vitreous Enameling Facility, Dec - 1995, R.W. Phillips Jr. |
| Standard Topics: New ASTM Painting Standards, Dec - 1995, Allen W. Grobin, Jr |
| SVC Topics: PVD Processes: Fixtures & Tooling, Dec - 1995, Donald M. Mattox |
| Calculation of the Parameters of Perforated Shields For Applications in Electroforming, Dec - 1995, Uwe Pilz |
| Color Change from Black to Green In Chromate Conversion Coatings: A Study by Scanning Electron Microscopy, Dec - 1995, I. Song, J.H. Payer, R. Painter and M. Marzano |
| The Nashville Sound—
Plating for
Music's Stars, Dec - 1995, [no author] |
| Nashville Jobshop Finds Booming Business In Refinishing 'Toys' for All Ages, Dec - 1995, [no author] |
| Coming into Compliance Using Vacuum Distillation, Dec - 1995, Beverly Graves |
| Alkaline Aqueous Cleaning Alternatives for Soft Metals, Oct - 1995, Adrain Pullen |
| Fact Sheet: Definition of Pollution Prevention, Jul - 1995, Florida Department of Environmental Protection |
| Fact Sheet: Developing a Facility Plan - Components of a Waste
Audit Report, Jul - 1995, Florida Department of Environmental Protection |
| Successful Pollution Prevention Strategies in a Zinc Die-Casting Plant, May - 1995, Eugene Park, Richard T. Enander, and
Richard G. Girasole Jr. |
| ODS-Free Metal Cleaning Overview, Apr - 1995, [no author] |
| Finishers' Think Tank, Apr - 1995, Marty Borruso |
| A GUIDEBOOK ON HOW TO COMPLY WITH THE CHROMIUM ELECTROPLATINGAND ANODIZING NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR
POLLUTANTS, Apr - 1995, EPA |
| MNTAP Fact Sheet: Resource Recovery in Plating Operations, Jan - 1995, [no author] |
| MNTAP Fact Sheet: Selecting a Still for On Site Recycling, Jan - 1995, [no author] |
| MNTAP Fact Sheet: Reducing Solvent Emissions from Vapor Degreasers, Jan - 1995, [no author] |
| MNTAP Fact Sheet: Aqueous and Semi-Aqueous Cleaners for Metal Parts Degreasing, Jan - 1995, [no author] |
| Finishers' Think Tank, Jan - 1995, Marty Borruso |
| Spray Application Processes, Sep - 1995, Jerry P. Hund |
| Navigating The Switch To An Aqueous Cleaning System, Oct - 1995, Doug Warner |
| Written Programs For Compliance, Oct - 1995, David Blustein |
| State of the Industry Report: Automation, Dec - 1995, [no author] |
| A GUIDEBOOK ON HOW TO COMPLY WITH THE CHROMIUM ELECTROPLATING AND ANODIZING NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS, Dec - 1995, [no author] |
| Electroplating Waste Minimization , Dec - 1995, [no author] |
| Turning Brownfields Into Gold, - 1995, William L. Perry |
| Continuous Electrolytic Metal Recovery With a Packed-Bed Cathode, - 1995, C. D. Zhou, E.J. Taylor, R.P. Renz and E.C. Stortz |
| The Environmental Pollution Prevention Project (EP3), - 1995, Maurice Knight |
| Assessment of Environmental Technology Needs at an Aerospace Manufacturer, - 1995, Glenn Welcher and Mel Barlow |
| Recycling of Chrome Plating Solution Using Membrane Electrolysis, - 1995, Serge E. Astaud |
| Overview of NOx Chemistry and Emissions Control Technology, - 1995, Randal G. Nicolli |
| New Age Brightening of Copper and Brass, - 1995, David W. Jean |
| Status of the Metal Products and Machinery Effluent Guideline, - 1995, William J. Cleary |
| Film Fixer Rejuvenation, - 1995, Diego d'Angelo |
| Management of Dry Film Resist Process Waste Streams, - 1995, Dr. John Lott and Dr. Karl H. Dietz |
| ISO 14000 - International Environmental Management Standard Update, - 1995, Dr. John Lott, Gary Roper |
| New OSHA Regulations for Hexavalent Chromium, - 1995, C. Freeman, K. Condit |
| Analytical Methodology for Comparitive Evaluation of RMA Solder Pastes, - 1995, H. H. Law, M. A. Paczkowski, V. J. Kuck, L Psota-Kelty |
| Practical Application of HVOF Thermal Spray Technology for Navy Jet Engine Overhaul and Repair, - 1995, Donald S. Parker |
| Polishing Aircraft Interiors, - 1995, Jim Katopodis |
| Evaluation of Zinc Alloys as an Alternative to Cadmium, - 1995, John T. Stropki, Glen H. Graham |
| Vapor Phase Corrosion Inhibitors in Metal Finishing Technologies, - 1995, Dugald M. Allen |
| Diamond Film Technology: Applications and Advantages for the Aerospace / Airlines Industry, - 1995, Myron Browning, Bernard Gagnon |
| Use of Solution Rejuvenation and Process Modifications to Minimize Metal Stripping Waste, - 1995, Dr. Thomas Giordano, Ms. Cynthia Ludwig and Ms. Stacey Rickles |
| Preparation of High Strength Low Alloy Steels and Other Difficult-To-Plate Metal Alloys for Electroplating and Electroless Plating, - 1995, Donald Baudrand |
| Alternative Processes to Methylene Chloride Chemical Strippers: A Review of Progress to Date, - 1995, Robert A. Pauli |
| Environmentally Compliant Coatings For Turbine Compressor Applications, - 1995, Mark F. Mosser and Kevin B. Eddinger |
| High Hardness Electroless Nickel, - 1995, [no author] |
| Electrochemical Oxidation Destruction of of Spent Non-Cyanide Strippers and Other Colored Compounds in Wastewaters, - 1995, Penny Wycoff and Dan F. Suciu |
| Automated Ultrahigh Pressure Water Jet , Nov - 1995, [no author] |
| Testing of Environmentally Preferred Architectural Coatings , Jan - 1995, [no author] |
| Paint Handling and Spraying Equipment Testing, Evaluation and Training , Nov - 1995, [no author] |
| Reclaim and Reuse Waste Water , Dec - 1995, [no author] |
| Unitized Coating Application Facility / E-coat and Powder Coat, Dec - 1995, [no author] |
| Nonchromatic/Noncarcinogenic Etching of Titanium for Adhesive Bonding, Nov - 1995, [no author] |
| Prototype a Non-Chromate Conversion Coating Process as a Pretreatment for Aluminum Alloys, Dec - 1995, [no author] |
| Ion Beam Processing for Environmentally Acceptable Coatings , Dec - 1995, [no author] |
| Removal of Heavy Metal Ions by Surfactant-Based Ultrafiltration: On-Site Testing, Nov - 1995, [no author] |
| Surface Modification, Organometallic and Polyaryl Coatings, and Flame Spray Technologies for Preventing Corrosion of Metals., - 1995, Sugama, T. |
| Preventing Cracking of Anodized Coatings, - 1995, Charles C. He and Thomas M. Heslin |
| User Data Package for Implementation of Electrolytic Recovery Technology in Navy Electroplating Shops, - 1995, Ford, K.; Koff, J. |
| Exploration of vanadium-base alloys, - 1995, Yamamoto, Albert S. And Rostoker, William |
| Case Studies - A compilation of successful waste reduction projects implemented by NC businesses, - 1995, NC Office of Waste Reduction |
| Environmental Research Brief - Pollution Prevention Assessment for a Manufacturer of Combustion Engine Piston Rings, - 1995, Jendrucko and Richard J. and Thomas, Todd M. and Looby, Gwen P. |
| New Regulation Controlling Air Emissions from Chromium Electroplating and Anodizing Tanks, - 1995, US EPA |
| EPA Office of Compliance Sector Notebook Project - Profile of the Fabricated Metal Products Industry, - 1995, US EPA |
| Case Studies - A compilation of successful waste reduction projects implemented by NC businesses, - 1995, NC Office of Waste Reduction |
| Case Study: Hamilton Beach / Proctor Silex, Inc, - 1995, NC DPPEA |
| Clean Air Act Compliance for Solvent Degreasers - Regulatory Strategies for Manufacturers Affected by the Clean Air Act Amendments NESHAP for Halogenated Solvent Cleaners, - 1995, University of Tennessee Center for Industrial Services; Tennessee Department of Environment and Conservation |
| US EPA Office of Compliance Sector Notebook Project - Profile of the Fabricated Metal Products Industry, - 1995, US Environmental Protection Agency, Office of Enforcement and Assurance |
| Chromium Electroplating MACT, - 1995, US EPA |
| Chromium Electroplating MACT , - 1995, SBCA-CRM-1006 |
| The 36th William Blum Lecture, Rotating Electrodes for Use in Electrodeposition Process Control, - 1995, Dr. David R. Gabe |
| Status Of The Metal Products And Machinery Effluent Guideline, Jan - 1994, CLEARY, W. |
| Pollution Prevention In The EPA Enforcement Program, - 1994, ROSENBERG, P. |
| Chromium Air Emissions Standards For Hard Chrome, Decorative Chrome, And Chromium Anodizing, - 1994, BANKER, L. |
| Elimination Of Ozone Depleting Chemicals And Implementation Of New Cleaning Methods, 1994 - 1994, SMITH, C. |
| The Characteristics of Diffusion Dialysis Membranes for the Recovery of Aluminum from Sodium Hydroxide Solution, January - 1994, Byszewski, Carolyn, et. al. |
| A Platers Lament- "They're Taking My Cyanide Away!", January - 1994, Packman, Sue |
| Comparison of Alkaline Zinc-Nickel and Acid Zinc-Nickel as a Replacement Coating for Cadmium, January - 1994, Bates, James A. |
| Testing and Evaluation of Electroless Nickel Bath, January - 1994, Palepu, Prakash and Chauhan, Satys |
| Boric Acid Improves the Recovery of Nickel from Waste Streams by Electrowinning, January - 1994, Huang, Chein-Ho and Shang, T.H. |
| Avoiding Cyanide Compliance Problems, January - 1994, Berman, Richard and Martin, Thomas H. |
| Waste Minimization Through Innovative Metal Removal and Automation, January - 1994, Choo, Pek Lee |
| Close-Looping Plating Shop Wastestreams: A Case Study, January - 1994, Baxter, Christopher A. |
| Design for Pollution Prevention & Waste Minimization, January - 1994, Moleux, Peter |
| Rinse Water Reduction Techniques/Two Case Studies at a Printed Wire Board Manufacturer, January - 1994, Folsom, Dale |
| Surface Finishing and the Toxics Release Inventory, January - 1994, Vail, Janet |
| Environmentally Sound Processes for the Cleaning and Microetching of Copper and Copper Alloys, January - 1994, Carano, Michael |
| A Case Study of Ozone Depleting Chemicals in an Electronics Cleaning Process, January - 1994, Kucera, Michael |
| Waste Minimization and Chemical Source reduction in Printed Circuit Board Manufacturing, January - 1994, Erb, Jeff and Carpenter, Burton |
| Purification and Maintenance of Acidic and Alkaline Process Solutions in Electronic Manufacturing Operations, January - 1994, Reinhard, Fred |
| Recovery of Cadmium and Cyanide Using a Combination of Ion Exchange and Membrane Extraction, February - 1994, Riley, Christopher T. and Semmens, Michael J. |
| Rinsing: The Silent Cleaner!, April - 1994, Zahn, Mark |
| Troubleshooting Functional Chromium, October - 1994, Corriere, N. |
| The Basics of Rack Plating of Plastics, Jan - 1994, Nick Anis |
| Prepaint Treatment, Jan - 1994, R.W. Phillips III |
| Finisher's Think Tank, Jan - 1994, Marty Borruso |
| Pre-Dip Before Nickel, Jan - 1994, Marty Borruso |
| Film Formation, Jan - 1994, Donald M. Mattox |
| Floating on Air, Feb - 1994, Frank Altmayer |
| Finisher's Think Tank, Feb - 1994, Marty Borruso |
| Finisher's Think Tank, Feb - 1994, Marty Borruso |
| Watts Nickel Plating, Feb - 1994, Marty Borruso |
| Updating Material Safety Data Sheets, Feb - 1994, Peter Moleux |
| Molding Quality, Feb - 1994, Nick Anis |
| Solving Problems: Keep you Mind's Eye Open, Feb - 1994, R.W. Phillips III |
| Film Formation, Feb - 1994, Donald M. Mattox |
| Finisher's Think Tank, Mar - 1994, Marty Borruso |
| Finisher's Think Tank, Mar - 1994, Marty Borruso |
| The Effects of Changing Parameters on Watts Nickel Plating, Mar - 1994, Marty Borruso |
| Common OSHA Citations and a Brief OSHA Regulation Update, Mar - 1994, Peter Moleux |
| Ion Plating, Mar - 1994, Donald M. Mattox |
| Processing PWBs in a Clean Room Environment, Apr - 1994, James P. Langan |
| Finisher's Think Tank, Apr - 1994, Marty Borruso |
| Finisher's Think Tank, Apr - 1994, Marty Borruso |
| Finisher's Think Tank, Apr - 1994, Marty Borruso |
| Finisher's Think Tank, Apr - 1994, Marty Borruso |
| Written Hazard Communication Programs, Apr - 1994, Vicki Sherwood |
| Zero Discharge Permitting - From Swamp to Quagmire ?, May - 1994, Michael Meagher |
| Finisher's Think Tank, May - 1994, Marty Borruso |
| Use Applicable Engineering to Design Racks for Plating, May - 1994, Nick Anis |
| Film Adhesion and "Deadhesion", May - 1994, Donald M. Mattox |
| The DFM Advantage, Jan - 1994, Happy T. Holden |
| Smart Control of Data that Drives Production, Jan - 1994, Laura Scholten |
| Progress and Profits in Waste Reduction, Feb - 1994, Victoria R. Allies |
| "Green" Plating Systems, Feb - 1994, Kathleen Nargi-Toth |
| The Future of Hot Air Leveling, Feb - 1994, Jim Higson |
| Aqueous Processing, Feb - 1994, Elmer Hayes |
| Boosting Drilling Productivity, Feb - 1994, Robert C. Henningsgard |
| Laminate Z-Axis Expansion, Feb - 1994, A. Chris Garlington |
| The Redesign Process, Feb - 1994, Gene Hendrickson Terri Volpe |
| Tracking the Ultrathin Trend, Mar - 1994, Jerry Murray |
| Ultrathin Multilayer Circuits, Mar - 1994, Matt Saari Carol Myers Dave Anderson |
| NCMS Update, Mar - 1994, Ron Evans |
| The PCMCIA..., Apr - 1994, Jerry Murray |
| Advanced Packaging, Apr - 1994, Jerry Murray |
| ISO 9000: An Annual Checkup, Apr - 1994, Elizabeth Clark |
| Accelerating PCB Fabrication, May - 1994, Jerry Murray |
| Cycle Time Reduction, May - 1994, Mike Hills |
| Industry Salary Survey, May - 1994, Elizabeth Clark |
| PCBs Cut PCB Test Time, May - 1994, Michael Fagan Paul Benke |
| Densification Techniques, Jun - 1994, Jerry Murray |
| Synergistic Quality Control, Jun - 1994, Randy Allinson Bob Houlihan |
| Current Density Effects, Jun - 1994, Gregory Forrest Donald Reed |
| High-Definition Imaging, Jun - 1994, Dr. Reiner Stoll |
| Preventive Maintenance, Jun - 1994, Irv Hoy |
| Information as a Tool, Jul - 1994, Max Clark |
| Closing the Gate on ET Escapes, Aug - 1994, David Wilkie |
| Fixture Facts, Aug - 1994, Griff Hill |
| A Journey to Process Improvement, Aug - 1994, James P. Bryan |
| PCB Primer, Sep - 1994, Don Ball |
| Flex Floodgate Opens, Oct - 1994, Jerry Murray |
| Adhesiveless Flex Substrates, Oct - 1994, Jerome Sallo |
| Pinpointing Tin/Lead Thickness, Oct - 1994, Frank Reilly |
| PCB Rx, Oct - 1994, Stephan Meschter |
| Gainsharing: The Inventive Incentive, Nov - 1994, Woodruff Imberman |
| Calculating Conveyor Speed, Nov - 1994, Charles Harvey |
| PCB Primer, Nov - 1994, Doug Lamberson |
| PCB Rx, Nov - 1994, Mark Nelson |
| Derailing the Cost Drivers, Dec - 1994, David E. Stone |
| Cutting Electroless Copper Costs, Dec - 1994, Martin J. Robertson |
| Dissecting Film Defects, Dec - 1994, William J. Soules |
| Slashing Substrate Costs, Dec - 1994, Wil Gonzales |
| Economizing in the Drill Room, Dec - 1994, Moiz Balkhi |
| Customer Satisfaction Index, Dec - 1994, Elizabeth Clark |
| Effect of Leveling Maxima in Low-Frequency Pulsed Electrodeposition with Brightener Additives, - 1994, Mois Aroyo, Technical University, Sofia, Bulgaria |
| Selective Boric-Sulfuric Acid Anodizing Process , - 1994, Francine Hammer SIFCO Selective Plating Div. SIFCO Industries, Independence, OH |
| Properties of Nickel, Nickel-Cobalt and Copper Electrodeposits for Dynamic Applications , - 1994, Berl Stein, CEF, Servometer Corp., Cedar Grove, NJ |
| Recycling Chlorinated Solvents , - 1994, Glenn Travis Environmental Management Services, Jennings, OK |
| Compliance with Chromium Regulations under the Clean Air Act , - 1994, Frank Altmayer, CEF, Scientific Control Labs, Chicago, IL |
| Regulation of Chromium Emissions in California , - 1994, M. Dean High, Pacific Environmental Services, Inc., Baldwin Park, CA |
| Scrubber Technologies and Their Maintenance , - 1994, Art Brooks, KCH Services, Inc., Forest City, NC |
| Controlling Hexavalent Fumes from Hard Chromium Tanks , - 1994, George E. Danielson, Merlin Enterprises, Huntington Beach, CA |
| Purification of Hexavalent Chromium Baths by Reciprocating Flow Ion Exchange, - 1994, Jeff D. Champagne, CET, Eco-Tec Inc., Pickering, Ontario, Canada |
| Reforming and Purifying Chromic Acid Plating Solutions Electrodialytically , - 1994, Penny A. Lindell and Daniel J. Vaughan, Ionsep Corporation Inc., Rockland, DE |
| The Use of Porous Pots for Chromium Bath Purification , - 1994, Ned Mandich, CEF, HBN Electrochemical & Engineering Corp., Lansing, IL |
| Ion Exchange: A Case Study , - 1994, Richard Burge, ChemResearch Company, Inc., Phoenix, AZ |
| The Chromyl Chloride Process: A Novel Technique for Chromium Recovery from Spent Plating Baths, - 1994, Subbarao L.V.S. Guddati, Thomas M. Holsen and J. Robert Selman, Department of Environmental Engineering, Illinois Institute of Technology, Chicago, IL |
| Recycling Chromium Wastes into Stainless Steel, - 1994, J.C. Onuska, J.A. Patterson and M.E. Schweers, INMETCO, Ellwood City, PA |
| OSHA and the Chromium Plater , - 1994, Peter Moleux, P.E., R.E.P., Peter Moleux & Associates, Newton Centre, MA |
| Improved Corrosion Resistance of Hard-Chromium-Plated Piston Rods , - 1994, Deepak Naik, Gabriel Ride Control, Pulaski, TN |
| Eliminating Substrate Defects , - 1994, Dr. Allen R. Jones, ATOTECH USA, Inc., Somerset, NJ |
| Analytical Methods , - 1994, Mary Traficante, ATOTECH USA, Somerset, NJ |
| Troubleshooting Functional Chromium Plating , - 1994, Nicholas Corriere, Jr., Industrial Chemical & Equipment Co., Minneapolis, MN |
| Achieving Quality Chromium Plating by Use of Agitation and Filtration , - 1994, Jack Berg, SERFILCO, Ltd., Northbrook, IL |
| Rack Design for Chromium Plating , - 1994, Herb Tilton, CEF, Tilton Rack & Basket Corp., Fairfield, NJ |
| Troubleshooting Decorative Chromium Plating , - 1994, V. Guernsey, Electroplating Consultants |
| Effect of Metallic Impurities on Trivalent Chromium Baths , - 1994, Nabil Zaki, Frederick Gumm Chemical Corp., Kearny, NJ |
| Justification for Trivalent Chromium for Jobshop Plating , - 1994, Don Foss and Stan Foss, Foss Plating Company, Sante Fe Springs, CA |
| Troubleshooting Decorative Trivalent Chromium , - 1994, Paul Hancharik, ATOTECH USA, Inc., Cleveland, OH |
| A New Trivalent Chromium Electrolyte and System with Improved Engineering Properties for Hard Chromium Applications , - 1994, Prof. V.N. Kudryavstev, Mendeleyev Institute of Chemical Technology, Moscow, Russia, CIS, and S.R. Schachameyer, Eaton Corporation, Milwaukee, WI |
| Environmentally Sound Process for Enhanced Plating Rate of Chromium from Chromium (III) Electrolytes, - 1994, M. El-Sharif, S. Ma, and C.U. Chisholm, Department of Energy and Environmental Technology, City Campus, Glasgow Caledonian University, Glasgow, Scotland |
| Effects of Underlayer Metals on Die Bond Reliability of Gold-Plated Ceramic Packages , Nov - 1994, Shinichi Wakabayashi, Noboru Sakaguchi, Norio Kaneko and Hiroyuki Nezu |
| Laser Surface treatment of Aluminum Alloy 6061 with SiC Powder Injection: Study of Microstructure and Wear Behavior , Nov - 1994, D. Pantelis, E. Giannetaki, Y. Chryssoulakis and P. Ponthiaux |
| Some Possible Roles of Cathodic Filming in the Electrodeposition of Alloys, Part II , Nov - 1994, Thomas C. Franklin, Venita Totten, Simon Jackson and Greg Jacobs |
| Regenerative Thermal Oxidation Systems: Help in Controlling VOCs in the Paint-finishing Industry , Nov - 1994, Jeff Brooks |
| Alternatives for Nickel in Electroplating Processes , Nov - 1994, Dr. Franz Simon |
| Molybdate-Based Alternatives to Chromating as a Passivation Treatment for Zinc , Nov - 1994, Peter T. Tang, Gregers Bech-Nielsen and Per Moller |
| Vacuum Vapor Degreasing System for Pollution Abatement , - 1994, M. Shenoy and D.J. Gray, Serec Corporation, Providence RI |
| Chemical and Mechanical Factors in the Aqueous Cleaning of Manufactured Parts, - 1994, Craig A. Burkart, TEXO Corporation, Cincinnati, OH, John C. Hogan, Center for Applied Environmental technologies, Institute of Advanced Manufacturing Sciences, Cincinnati, OH, and Stephen D. Temple, Ransohoff Company, Hamilton, OH |
| Zero Discharge Parts Cleaning Technology , - 1994, Kevin Whitall, Durr Industries, Newark, CA |
| Vapor Degreasing and Solvent "Hand-Cleaning" Replacement with Environmentally Safe Materials , - 1994, Cheryl A. Smith, Allied Signal Fluid Systems, Tempe, AZ |
| Industrial Lubricants and Cleaning Processes , - 1994, Dave Peterson, Modine Manufacturing, Racine, WI |
| Environmentally Acceptable Methods for Cleaning Metal Parts , - 1994, Richard Pirrotta, P.E., Dave Roberts and Melissa J. Hartfiel, National Defense Center for Environmental Excellence, Johnstown, PA |
| Advanced Reverse Osmosis--A Practical Technology for Water and Metal Recycling , - 1994, Dr. Fred Reinhard, Kinetic Recovery Corporation, Edina, MN |
| Assessment of Pollution Prevention and Control Technology for Plating Operations , - 1994, Dr. Paul D. Chalmer, National Center for Manufacturing Science, Ann Arbor, MI; and George C. Cushnie Jr., CAI Engineering, Oakton, VA |
| Acid Purification and Recovery Using Resin Sorption Technology--An Update , - 1994, Michael Dejak, P.Eng., Eco-Tec Limited, Pickering, Ontario, Canada |
| Recovery of Alkali by Diffusion Dialysis , - 1994, Carolyn Byszewski, Graver Water, Union, NJ, Mark Jaffari, Malek, San Diego, CA, Bel Trevino, consultant, Kingston, RI, and Dr. Stanley Bennett, University of Rhode Island, Providence, RI |
| Membrane Electrolysis--A New Process for Regeneration of Used Etching Solutions , - 1994, Dipl. Ing. A. Deuschle, OSMOTA Membrantechnik GmbH, Korntal-Munchingen, Germany |
| Technology Transfer--A Two-Way Street, - 1994, Lee Martin, Westinghouse Savannah River Company, Aiken, SC |
| Alloy Plating Process Offers Superior Aerospace Performance , - 1994, David M. Scruggs and Gerald A. Croopnick, Amorphous Technologies International, Laguna Niguel, CA |
| A Zinc-Nickel Alloy Electrodeposit Tested to Cadmium Military Specifications , - 1994, Gary S. Tindall, Corpus Christi Army Depot, Corpus Christi, TX |
| Comparison of Alkaline Zinc-Nickel and Acid Zinc-Nickel as a Replacement Coating for Cadmium , - 1994, James A. Bates, Pure Coatings Inc., West Palm Beach, FL |
| The Use of Dry Abrasive Blast Cleaning for Preparation of Parts for Plating , - 1994, Robert F. Zecher, Tumbleveyor, Inc., Huntingdon Valley, PA |
| Testing and Evaluation of Rejuvenation of an Electroless Nickel Bath , - 1994, Prakash Palepu and Satya Chauhan, Battelle, Columbus, OH, and Glen Graham, Tinker AFB, Oklahoma City, OK |
| Boric Acid Improves the Recovery of Nickel from Waste Streams by Electrowinning Professor , - 1994, C.H. Huang and T.H. Shang, Soochow University, Shihlin, Taipei, Taiwan, Republic of China |
| Removal of Residual Nickel from Finishing Wastes After Using Composite Polypyrrole Films , - 1994, Maria Hepel and Richard Stephenson, Potsdam College of the State University of New York, Potsdam, NY |
| Avoiding Compliance Problems with Cyanide , - 1994, Dr. Richard Berman, Perstorp Analytical, Wilsonville, OR, and Thomas H. Martin, CEF, Delta Chemicals & Equipment, Indianapolis, IN |
| Hazardous Waste Reduction Through Innovative Metal Removal and Automation , - 1994, Dr. Pek Lee Choo, CEF, Nalco Chemical Company, Naperville, IL and Steve Hegerle, Challenger Electrical Equipment Corporation, Jackson, MS |
| Heavy Metals Removal/Stabilization with New Microfiltration Technology , - 1994, Dr. Ernest Mayer, E.I. du Pont de Nemours, Inc., Newark, DE |
| Electrocoagulation Treatment of Wastewaters for Metal Finishing Processes , - 1994, Carl W. Dalrymple, P.E., Hydrologics, Inc., Englewood, CO |
| An Environmentally Efficient Design for a New Captive Metal Finishing Facility , - 1994, Philip R. Pouech, CEF and Jeffrey R. Lord, CEF, Simmonds Precision Aircraft Systems, BFGoodrich Aerospace, Vergennes, VT |
| The Environmentally Optimized Factory Concept , - 1994, David F. Ciambrone, D.Sc., REA, Biogenesis Environmental Services, Irvine, CA |
| System Design Approach for a Zero Discharge Electroplating Facility , - 1994, Thomas C. Roberts, CTC, National Defense Center for Environmental Excellence, Johnstown, PA |
| Closed-Looping Acid/Alkaline Wastestreams: A Case Study , - 1994, Christopher A. Baxter, Burns & McDonnell Engineers, Kansas City, MO |
| Applying Pollution Prevention in the Metal Finishing Industry , - 1994, Derek Vachon, Ken Coulter and Larry Whittle, Wastewater Technology Center/Rockcliffe Research Management Institute, Burlington, Ontario, Canada |
| Pollution Prevention by Design--Renovation and Construction of Surface Finishing Facilities , - 1994, William Shively, P.E., and Kevin Klink, P.E., CH2M Hill, and Peter Gallerani, CEF, Integrated Technologies, Inc., Cheshire, CT, |
| Tools for Cleaner Technology in Plating Shops , - 1994, Allan Herrstedt Jensen, Johan Chr. Gregersen and Niels Frees, Institute for Product Development, The Technical University of Denmark, Lyngby, Denmark |
| The Pollution Prevention Assessment as a Tool for Identifying Effluent Metal Sources , - 1994, Kevin F. Gashlin and Alan Ulbrecht, New Jersey Institute of Technology (NJIT), Newark, NJ |
| The Rewards and Problems Associated with Operating a First-Class Industrial Wastewater Treatment Plant, - 1994, David L. Derryberry, Packard Electric Division of General Motors Corp. |
| A Tumbling Mechanism to Replace the Barrel in Plating Small Parts in Bulk , - 1994, Robert F. Zecher, Tumbleveyor, Inc., Huntingdon Valley, PA |
| The Use of Material Balances in the Plating Shop , - 1994, Glenn R. Hodge, ALCOA Electronic Packaging Inc., San Diego, CA |
| Pollution Prevention and Control By Statistical Applications , - 1994, Bud Gookins, Elyria Plating Corp., Elyria, OH |
| Why an Environmental Compliance Audit? , - 1994, Beth S. Gotthelf, Seyburn, Kahn, Ginn, Bess, Howard and Deitch, P.C., Southfield, MI |
| Zero Discharge Permitting--From Swamp to Quagmire , - 1994, Michael Meagher, Goodwin, Procter & Hoar, Boston, MA, and Peter Gallerani, CEF, Integrated Technologies, Inc., Cheshire, CT |
| Multi-Media Compliance Assessments (MMCAs): Auditing for Pollution Prevention , - 1994, Mary Ann Latko, CSP, and Dr. Victoria Cooper, Carnow, Conibear & Associates, Ltd., Chicago, IL |
| Elimination of Ozone-Depleting Chemicals from a Manufacturing Facility , - 1994, Susan Nerkowski and John Zavodjancik, CEF, Pratt & Whitney, East Hartford, CT |
| The Industrial Impact of EPA's Part 503 Sewage Sludge Regulation , - 1994, Nicholas J. Melas and Mary Ann Latko, C.S.P., Carnow, Conibear & Associates, Ltd., Chicago, IL |
| Developing Dependable Air Emission Estimates Using Available Literature , - 1994, Charles D. Forbes and Jeffrey D. Marshall, P.E., SCS Engineers, Reston, VA |
| Superfund--Fairness Has Nothing To Do With It! , - 1994, Beth S. Gotthelf, Seyburn, Kahn, Ginn, Bess, Howard and Deitch, P.E., Southfield, MI |
| Criminal Prosecution for Environmental Crimes , - 1994, Michael L. Siegel, Stone, McGuire & Benjamin, Chicago, IL |
| Life-Cycle Assessment: Lessons Learned , - 1994, Mary Ann Latko, CSP, and Dr. Victoria Cooper, Carnow, Conibear & Associates, Ltd., Chicago, IL |
| Extending Product Liability: Cradle-to-Grave Analysis , - 1994, Dr. Victoria Cooper and Mary Ann Latko, CSP, Carnow, Conibear & Associates, Ltd., Chicago, IL |
| Utilizing an Integrated Information Management System to Document Pollution Prevention Plans and Progress Reports , - 1994, Thomas F. Stanczyk, Recra Environmental, Inc., Amherst, NY |
| Raising Your Pretreatment Permit Limits for Cyanide , - 1994, Thomas Morgan, Universal Fasteners Inc., Lawrenceburg, KY, and Thomas Martin, CEF, Delta Equipment and Chemicals, Indianapolis, IN |
| Plant-Wide Waste Minimization Efforts at an Aerospace Manufacturing Facility , - 1994, Jeffrey R. Lord, CEF, Philip Pouech, CEF, and Michael Hodge, Simmonds Precision Aircraft Systems, BF Goodrich Aerospace, Vergennes, VT |
| Why Pollution Prevention? , - 1994, Beth S.Gotthelf, Seyburn, Kahn, Ginn, Bess, Howard and Deitch, P.C., Southfield, MI |
| Rinsewater Reduction Techniques/Case Studies , - 1994, Dale W. Folsom, P.E., Battelle Memorial Institute, Columbus, OH, and Teresa M. Harten, U.S. EPA, Risk Reduction Engineering Laboratory, Cincinnati, OH |
| Source Reduction Requirements of Pennsylvania's New Residual & Hazardous Waste Regulations--Applicability to the Surface Finishing Industry , - 1994, Linda J. Kunitsky, CH2M Hill, Philadelphia, PA |
| Semi-Aqueous Alternatives to CFC Cleaning in SMT Assembly , - 1994, Gregory E. Albert, E.I. duPont de Nemours & Co., Inc., Wilmington, DE |
| 4286. A Case Study of the Replacement of the Ozone-Depleting Chemicals in an Electronics Cleaning Process , - 1994, Michael Kucera, Vitramon, Inc., Bridgeport, CT |
| The New Electrogalvanizing Line at I/N Kote, Jan - 1994, Mark S. Blaser; Edward T. Nowak |
| Pollution Prevention Steps for Plastic Coaters--A Simplified Approach, Part I, Jan - 1994, James P. Lamancusa |
| Armco's No. 2 Electrogalvanizing Line Incorporates Major Improvements , Jan - 1994, T.R. Heckard; E.A. Williams |
| Understanding Plating Stains, Jan - 1994, Charles S. Leech, Jr. |
| Friction and Wear Characteristics of Electroless Ni-P-PTFE Composite Coatings , Jan - 1994, Masayoshi Nishira and Osamu Takano |
| Ceramic Metallization Using Molten Salt and Electroless Plating , Jan - 1994, C.D. Iacovangelo, E.C. Jerabek and R.N. King |
| The Effect of Some Additives on the Throwing Power and Stability of Tin(II) Solutions During A-C Coloring of Anodized Aluminum, Part I: Heterocyclic Organic Compounds , Jan - 1994, R. Moshohoritou, I. Tsangaraki-Kaplanoglou and C. Kotsira |
| Electroless Metal Deposition as a Useful Tool for Microelectronics and Microstructures , Jan - 1994, E. Queau, G. Stremsdoerfer, J.R. Martin and P. Clechet |
| Diversifying for the Future Plating and Sur. Fin. Feature, Feb - 1994, [no author] |
| Cactus Coatings: Where Surface Finishing is Not Electroplating! Plating and Sur. Fin. Shop Visit, Feb - 1994, [no author] |
| Recovery of Cadmium and Cyanide Using a Combination of Ion Exchange and Membrane Extraction , Feb - 1994, Christopher T. Riley and Michael J. Semmens |
| The Effect of Some Additives on the Throwing Power and Stability of Tin(II) Solutions During A-C Coloring of Anodized Aluminum Part II: Sulfonic Acids, Amino Acids, Antioxidants , Feb - 1994, R. Moshohoritou, I. Tsangaraki-Kaplanoglou and C. Kotsira |
| Experimental Strategy--Application of Taguchi's Quality Engineering Method to Zinc Phosphate Coating Uniformity , Feb - 1994, Shih-Min Lin and Ten-Chin Wen |
| Corrosion Testing of Nickel Palladium Alloy Electrodeposits for Electronic Applications , Feb - 1994, Malathy Pushpavanam, C. Marikkannu, S.R. Natarajan and K. Balakrishnan |
| Alkaline Nickel Plating, May - 1994, Edward B. Saubestre |
| Effect of Additives on Electrodeposition of Composite Chromium Coatings , Mar - 1994, O. Berkh, S. Eskin and J. Zahavi |
| Electrodeposition of Iron-Nickel Alloys in the Presence of Organic Additives , Mar - 1994, B.N. Popov, S.N. Popova, Ken-Ming Yin and R.E. White |
| Effects of Pretreatment on the Structure and Properties of Electroless Nickel Coatings , Mar - 1994, Hong Deng and Per Moller |
| Electroless Chemical Deposition of NiP Coatings onto Si and InSb , Mar - 1994, Evgenia Valova |
| Pollution Prevention Steps for Plastic Coaters--A Simplified Approach, Part II , Mar - 1994, James P. Lamancusa |
| Plating Shops for the '90s and Beyond , Mar - 1994, Ted Mooney |
| Electroless Nickel Plating Is Not "Electro...less" , Mar - 1994, Robert A. Jeanmenne |
| Eliminating Electroplating Stains (Part 2) , Mar - 1994, Charles S. Leech, Jr. |
| Some Mechanisms of the Action of Additives in Electrodeposition Processes , Apr - 1994, Thomas C. Franklin |
| Vacuum Deposition Processes and the Properties of Thin Films , Apr - 1994, K.H. Guenther |
| A Comparison of Electrolytic and Electroless Ni/Au Finishing Processes For Multilayer Ceramic IC Packages , Apr - 1994, Earl D. Winters, William K. Baxter and Ashok Choudhury |
| Assessment of Pollution Prevention & Control Technology for Plating Operations, Apr - 1994, George C. Cushnie, Jr., Paul D. Chalmer and William Sonntag |
| Comparison of Alkaline Zn-Ni & Acid Zn-Ni as a Replacement Coating for Cadmium , Apr - 1994, James A. Bates |
| Designing a New PCB Facility for Successful Pollution Prevention & Waste Minimization , Apr - 1994, Peter Moleux |
| New Brunswick Plating, Inc.: The Education Hub for the Garden State Branch Provides Aerospace Quality for All Jobs , May - 1994, [no author] |
| Recent Improvements in Processing High-Current-Density Tin-Free Steel , May - 1994, Martine Develay, I.J. "Chris" Kharouf, John R. Gibson and Daniel Sylvain |
| Ergonomics: A Vital Part of Your Business , Jun - 1994, Graciela Balke |
| Chicago Electroplating Facility Makes Safety Its Business Plating and Sur. Fin. Feature, Jun - 1994, [no author] |
| The $25,000 Question: Are You Really Out of Compliance? , Jun - 1994, Thomas Martin and Robert Medsker |
| Electrodeposition of Alloys , - 1994, Dr. David Lashmore |
| ISO 9000 from a Plant Manager's View , - 1994, John Norton, CEF, AMP, Inc., Gastonia, NC |
| The Long-term Benefits of ISO 9000 Certification , - 1994, Joseph DeCarlo, Lloyd's Register Quality Assurance Ltd., Hoboken, NJ |
| ISO 9000 Registration Process from the Registrar's Perspective , - 1994, David Wolfe, Underwriters Laboratories Inc., Northbrook, IL |
| International Organization for Standardization Initiative to Create International Environmental Management Standards , - 1994, James Connaughton and Christopher Bell, Sidley & Austin, Washington, DC |
| An Overview of AESF's New ISO 9000 Course for Platers & Finishers , - 1994, Bev Sewell, Twickenham Plating Group, Brentford, Middlesex, England |
| An Overview of AESF's New ISO 9000 Course for Platers & Finishers , - 1994, Bev Sewell, Twickenham Plating Group, Brentford, Middlesex, England |
| Documentation and ISO 9000 , - 1994, Harvey Trop, AT&T Bell Laboratories, Breinigsville, PA |
| Environmental Management Systems Standards are Following the Quality Lead in International Standards , - 1994, Gary C. Roper, CQA, H-R Industries, Inc., Richardson, TX |
| Quality: Smoke and Mirrors or Reality in Your Plating Shop? , - 1994, Dr. Paul Piplani, CEF, and Ron Lee, SW United Industries, Tulsa, OK |
| Thin Gold Contact Finishes for Electronic Connectors , - 1994, Dr. Morton Antler, Contact Consultants, Inc., Columbus, OH |
| Metallization of Polypyrrole Films, Part I: Electrodeposition of Nickel , - 1994, Maria Hepel and Richard Stephenson, CEF, Potsdam College of SUNY, Potsdam, NY |
| Spot Plating on an Unmasked Substrate with Impinging Jet , - 1994, Cetin Karakus and Dr. DerþTau Chin, Clarkson University, Potsdam, NY |
| The Optimization of Throwing Power in Pulse Reversal Plating from a Silver Cyanide Solution , - 1994, Dr. Peter Leisner, Peter T. Tang, M.Sc., and Gregers Bech-Nielsen, Centre of Advanced Electroplating, Lyngby, Denmark |
| The Investigations and characteristics of Cobalt Multilayer Metal Nanostructures , - 1994, Dr. David M.A. NabiRahni, Pace University, Dept. of Chemistry, Pleasantville, NY, and Peter T. Tang, M.Sc., and Dr. Peter Leisner, Centre of Advanced Electroplating, Lyngby, Denmark |
| Development and Characterization of Tin-Capped Gold Bumps in TAB , - 1994, F. Carney, G. Carney, J. Heckman, M. Nagarkar, J. Schaper, M. Seddon and E. Woolsey, Advanced Packaging Design and Automation Center, LATG Advanced Technology, Motorola, Inc., Chandler, AZ |
| Laser-Induced Selective Deposition of Palladium on Pyroceram and Polyimide , - 1994, Zuzhan Yu, Xin Zeng and Yamei Wang, Department of Chemistry, Fudan University; and Guoqing Zhao, Department of Nuclear Science, Fudan University, Shanghai, P.R.C. |
| Environmental Liability: Old Insurance Policies May Pay , - 1994, John S. Vishneski III, Keck, Mahin & Cate, Chicago, IL |
| Electrolytic Metal Recovery with a Packed-Bed Cathode , - 1994, C.D. Zhou, R.P. Renz, E.J. Taylor, and M.K. Sunkara, Faraday Technology, Inc., Dayton, OH |
| Practical Recommendations for Compliance with the 1990 Clean Air Act Amendment , - 1994, Geoffrey Glanders, August Mack Environmental, Inc., Indianapolis, IN |
| Practical Pollution Prevention Techniques for Platers , - 1994, Thomas Allegretti, Amerdec, Inc., Waukegan, IL |
| Will the Regulators Believe You? , - 1994, Thomas H. Martin, CEF, Delta Chemicals & Equipment, Inc., Indianapolis, IN |
| The Diffusion of Technology During 70 Years of Anodizing , - 1994, Arthur W. Brace, Metal Information Services, Gloucester, England |
| Casting for Surface Finishing (CSF), A New Method for Surface Finishing of Cast Aluminum Alloys , - 1994, Anne Deacon Juhl, M.Sc., and Dr. Per Moller, Centre of Advanced Electroplating, Lyngby, Denmark; Dr. Leif Hþjslet Christensen, Danish Technological Institute, Tastrup, Denmark; and Lars Feldager Hansen, M.Sc., and Dr. Preben Nordgard Hansen, |
| Alloys and Their Temper in Hardcoating , - 1994, Richard E. Going, CEF, ROG Enterprises, Ashland, MA |
| Pretreatment Prior to Anodizing Aluminum , - 1994, Bill Sharp, CEF, Novamax Technologies, Inc., Atlanta, GA |
| Several Experiments on Aluminum Surface Treatments , - 1994, Kyoko Kaminaga and Prof. Toshihiko Sato, Shibaura Technical University, Tokyo, Japan |
| Anodizing by Current Density , - 1994, Charles A. Grubbs, CEF, Sandoz Chemical Corporation, Charlotte, NC |
| Faster, Harder, Better; Improving the Quality of the Anodic Film by Use of Organic Additives in the Anodizing Bath , - 1994, Wayne Chandler, Southern Industrial Chemicals, Inc., Atlanta, GA |
| The Effect of Porosity Test Atmospheres on the Integrity of Pd-Ni Platings , - 1994, Dr. Simeon J. Krumbein, Diane Y. Hanse and J.D. Kronicz, AMP, Inc., Harrisburg, PA |
| Application of Irreversible Thermodynamics to Transport Processes in Sulfuric-Acid-Based Aqueous Anodizing Solutions , - 1994, S.K. Jalota, Olin Corporation, New Haven, CT |
| Plating of 60/40 Tin-Lead Solder for Head Termination Metallurgy , - 1994, Dr. Saad K. Doss, IBM Corporation, San Jose, CA |
| Multilayer Palladium Coatings for Solderability and Wirebonding Applications in Electronic Packaging , - 1994, Dr. I.V. Kadija, Dr. J.A. Abys, J.J. Maisano, and E.J. Kudrak, CEF, AT&T Bell Laboratories, Murray Hill, NJ; and S. Shimada, Dowa Mining Co., Ltd., Tokyo, Japan |
| Solderability-Non-Destructive Test, Quantitative, Evaluation and Predictability of Solderability of Electronic Devices Michael Pavlov, , - 1994, Dr. Gene Chalyt, Dr. Peter Bratin and Rita Gluzman, ECI Technology, East Rutherford, NJ |
| The Performance Characteristics of EN Films for Electronic Applications , - 1994, Mark H. Suplicki and Dr. Alan J. Ruffini, Fidelity Chemical Products Corp., Newark, NJ |
| A Novel Palladium Stripping Solution-Its Performance and Maintenance, - 1994, H.K. Straschil, J.J. Maisano, I.V. Kadija, F. Humiec and J.A. Abys, CEF, AT&T Bell Laboratories, Murray Hill, NJ |
| Wastewater Treatment: Case Study for Heavy Metals Removal Using a Granular, Magnesium-Based Adsorbent , - 1994, Matthew D. Walter, Aileen Reyes and Joseph T. Witkowski, Martin Marietta Magnesia Specialties, Inc., Baltimore, MD |
| Designing and Implementing a Medical Surveillance Program in the Electroplating and Surface Finishing Industry , - 1994, Dr. Shirley A. Conibear, M.P.H., Carnow, Conibear & Associates, Ltd., Chicago, IL |
| Integration of Multiple Wastewater Technologies in a Metal Finishing Shop , - 1994, Ali Ahmadi and Ken Linehan, Wheelabrator/MEMTEK Corporation, Billerica, MA |
| Electroplaters in Southwest Ohio Demonstrate Waste Reduction Techniques , - 1994, Craig Melvin, Institute of Advanced Manufacturing Sciences (IAMS), Cincinnati, OH |
| Wastewater Treatment with a Combined Adsorption/Flocculation Process , - 1994, Dr. Joseph M. Ragosta, Graver Chemical Company, Union, NJ |
| Wastewater Treatment with Adsorptive Precoats , - 1994, Dr. Joseph M. Ragosta, Graver Chemical Company, Union, NJ |
| Vitrification of F006 Plating Waste Sludge by Reactive Additive Stabilization Process (RASP) , - 1994, H. Lee Martin, Carol M. Jantzen and John Pickett, Westinghouse Savannah River Co., Aiken, SC |
| Advances in Coloring of Anodized Aluminum , - 1994, Pinakin Patel, Sandoz Chemicals Corporation, Charlotte, NC |
| New Electrocoloring Process of Anodized Aluminum , - 1994, Mores Basaly, Novamax Technologies, Inc., Atlanta, GA |
| Neutralization Titration Curves of Electrolytic Coloring Bath for Anodized Aluminum , - 1994, Prof. Toshihiko Sato and Kyoko Kaminaga, Shibaura Technical University, Tokyo, Japan |
| Electrocolor and Integral Color Anodizing of Aluminum Alloys , - 1994, Dr. Xavier A. Ventura, Electroplating Consultants, Barcelona, Spain |
| Sealing of Anodized Aluminum , - 1994, Mores Basaly and Dr. Sam Massad, Novamax Technologies, Inc., Atlanta, GA |
| Graffiti Resistance of Various Sealing Methods , - 1994, Lee C. Branch, Melvin L. Todd, and Les C. Widmyer, Albright & Wilson Americas, Surface Technologies Group, Ashland, VA |
| The Development of an Expert System Using Neural Networks for the Identification of Process Defects in Anodizing , - 1994, Arthur W. Brace, Metal Information Services, Gloucester, England |
| A Quality Approach to Troubleshooting Your Anodizing Line , - 1994, Mark Spencer, Sandoz Chemical Corporation, Charlotte, NC |
| Accelerated Corrosion Testing , - 1994, Amiel Forshee, P.E., CQE, Boeing Commercial Airline Group, Seattle, WA |
| Quality: The Spark of Life for Anodizing, - 1994, Richard Mahn, Southern Industrial Chemicals, Inc., Atlanta, GA |
| Automated Chemical Process Control in Aluminum Finishing , - 1994, Drew Johnston, Walgren Company, Grand Rapids, MI |
| Aluminum Finishing for the Lighting Industry , - 1994, John Stewart, Major Reflector Products, Northbrook, IL |
| Environmentally Optimized Aluminum Finishing Line , - 1994, Paul W. Fecsik, CEF, and Bruce T. Miller, Hughes Missile Systems Company, Tucson, AZ |
| Preserving Solderability on High Density Printed Circuit Boards , - 1994, James P. Langan, J. P. Langan & Associates, Inc., Red Bank, NJ |
| Preventing Rejects When Plating Circuit Boards, Memory Disks, Electrical Contacts and Other Electronic Components , - 1994, Jack H. Berg, Serfilco, Ltd., Northbrook, IL |
| Racks and Fixture Design for Printed Circuit Wet Processing , - 1994, Bill Faulman, Associated Rack Corporation, Wheeling, IL |
| Methods for Monitoring the Activity of Colloidal Tin-Palladium Catalysts; Part II An Optical Method , - 1994, S. Lal, C. G. Smith, W. Logan, Y. Okinaka and H. S. Trop, AT&T Bell Laboratories, Murray Hill, NJ |
| Super High-Speed Electroless Nickel Plating Process , - 1994, Jing Li Fang, Yong Wu, Min Zhang, Jing Fang, Applied Chemistry Institute, Nanjing University, Nanjing, China |
| Tin and Bismuth Substitutes for Electrodeposited Lead, - 1994, Prof. P. L. Cavallotti and G. Zangari, Dip. Chimica Fisica Appl., Milano, Italy; and V. Sirtori, IBM SEMEA-ECAT, Vimercate (MI), Italy |
| Alternatives to Nickel in Electroplating Processes , - 1994, Dr. F. Simon, Degussa AG, Schwabisch Gmund, Germany |
| Alternatives to Cadmium , - 1994, Dr. David R. Gabe, Institute of Polymer Technology and Materials Engineering, Loughborough University of Technology, Leicestershire, UK |
| Molybdate-Based Alternatives to Chromating as a Passivation Treatment for Zinc , - 1994, Peter T. Tang, M.SC., Gregers Bech-Neilsen and Dr. Per Moller, Centre of Advanced Electroplating (CAG), Technical University of Denmark, Lyngby, Denmark, Lyngby, Denmark |
| Recent Improvements in Physical Vapor Deposition , - 1994, Dr. Brent Lee, Vacuum Plating Technology, San Jose, CA |
| Direct Connected Plastic Anode Baskets , - 1994, Vern A. Mehler, South Bend, IN |
| Distributing Your Product and the Antitrust Laws , - 1994, Larry J. Saylor, Miller, Canfield, Paddock & Stone, P.L.C., Detroit, MI |
| Theoretical Considerations in Pulse Reverse Plating , - 1994, Dr. Ned Mandich, CEF, HBM Electrochemical & Engineering Corp., Lansing, IL |
| Characterization of Electrodeposited Zinc Coatings , - 1994, Dr. Nicholas Martyak and Dr. J.E. McCaskie, Atotech USA, Somerset, NJ; and Dr. Richard J. Nichols, Atotech Deutschland GmBH, Berlin, Germany |
| Non-Hexavalent Chromium Plating Solutions: A Russian Viewpoint, - 1994, Prof. Vladimir Kudryavtsev and E.G. Vinokurov, Mendeleyev University of Chemical Technology of Russia, Moscow, Russia, and Steven Schachameyer, Eaton Corporation, Milwaukee, WI |
| Study of Different Processes for Protection & Finishing of Electroplated Parts in the Automotive and Related Industries , - 1994, Louis Candeil, L. C. Systems, Cugnaux, France |
| Electroless Gold Deposition in a Non-Alkaline, Cyanide-Free Bath , - 1994, Anne Sullivan, Ajay Patel and Paul A. Kohl, Georgia Tech, Atlanta, GA |
| New Techniques to Use Electrochemical Measurements in Process Control , - 1994, Dr. A.R. Zielonka and Dr. Ch. J. Raub, Forschungsinstitut for Edelmetalle und Metallchemie, Schw„bisch Gmnd, Germany |
| Metal Analysis Using Anodic Stripping Voltammetry and Microelectrode , - 1994, R.P. Renz, E.J. Taylor, D.R. Veach and C.D. Zhou, Faraday Technology, Inc., Dayton, OH |
| Monitoring Bath Health by Measuring Plating Efficiency with the Quartz Crystal Microbalance , - 1994, K. Keiji Kanazawa, G. L. Borges, and Dr. S. Doss, IBM Almaden Research Center, San Jose, CA, and Cleve Hildebrand, Maxtek Corporation, Torrance, CA |
| Use of a Spreadsheetþbased Computer Program to Calculate Chemical Additions and Implement a Feedback Control System , - 1994, Michael R. Eckstein and Conrad P. Bowers, Industrial Plating, Lafayette, IN |
| Ultrasonic Aqueous and Semi-Aqueous Cleaning: Efficient Alternatives to Vapor Degreasing , - 1994, Dr. Sami B. Awad, Crest Ultrasonics, Trenton, NJ |
| Evaluating Your Alternatives to Replace an Ozone-Depleting Cleaning Process , - 1994, Wayne L. Mouser, Detrex Corporation, Bowling Green, KY |
| The Corrosion Resistance of Tin/Zinc Alloys , - 1994, Jean Rasmussen, Danfoss A/S, The Centre of Advanced Electroplating, Lyngby, Denmark |
| New Non-Formaldehyde, Non-Coumarin, Non-Sulfur, Electrolytic Bright Nickel Plating Process , - 1994, Steven W. Erwin and Richard O. Watson, CEF, Benchmark Chemical Products, Inc., Indianapolis, IN |
| Stress, Additives and Adhesion in Electroplated Zinc Deposits , - 1994, Dr. David Crotty and Joseph Greene, Allied-Kelite Division, Witco Corporation, New Hudson, MI |
| Study on Hard Chromium Plating from Trivalent Chromium Bath , - 1994, Shuzhen Duan and Huidong Li, Xin Zhang, University of Science & Technology, Beijing, P. R. China, and Dr. John Dash, Portland State University, Portland, OR |
| The Role of Ultrasonics in Aqueous Cleaning , - 1994, F. John Fuchs, Blackstone Ultrasonics, Jamestown, NY |
| Managing Regulatory Change for Small Business: The Cadmium, Nickel and Chromium Standards and Their Impact on Occupational Health and Safety Program Management in Metal Finishing Companies , - 1994, Michael Ziskin, CHCM, CHMM, and Mary A. Healy, CIH, Field Safety Corporation, Stamford, CT |
| Competency-Based Training in Electroplating & Surface Finishing Facilities , - 1994, Michael Ziskin, CHCM, CHMM, Field Safety Corporation, Stamford, CT |
| Hazard Communication: Taking It All in Stride , - 1994, Vicki Sherwood, DuPont Electronics, Research Triangle Park, NC |
| Process Safety Management of Highly Hazardous Materials (I) , - 1994, Robert Lee, CEF, Rogers Corporation, Rogers, CT |
| Labeling Requirements , - 1994, Martha Martin, CEF, Delta Chemicals & Equipment, Indianapolis, IN |
| Qualitative Worker Exposure Assessment: More Than Just Air Testing , - 1994, Phillip Platcow, CIH, Sedgwick Risk Control Services, Boston, MA |
| Control of Hazardous Energy Lockout/Tagout/Test , - 1994, Bob Napolitano, CEF, HiþG Company, South Windsor, CT |
| Pulse-Plated Pb-Sn Alloys from Methane Sulfonate Electrolyte (AESF Project 88) , - 1994, Dr. K.G. Sheppard and Q. Lin, Department of Materials Science & Engineering, Stevens Institute of Technology, Hoboken, NJ |
| Underpotential Deposition of Zinc for Mitigation of Hydrogen Absorption and Penetration into HY-130 Steel , - 1994, G. Zheng, B.N. Popov, and Dr. R. E. White, Department of Chemical Engineering, University of South Carolina, Columbia, SC |
| Electrodeposition of Iron-Nickel Alloys in the Presence of Organic Additives (AESF Research Project 83), - 1994, S.N. Popova, B.N. Popov, Ken Ming Yin and Dr. R. E. White, Department of Chemical Engineering, University of South Carolina, Columbia, SC |
| Continuous Electrolytic Treatment of Complex Cyanide Wastes with a Barrel Plater (AESF Research Project 78) , - 1994, C.D. Zhou and Dr. D.T. Chin, Clarkson University, Potsdam, NY |
| The Effect of the Interaction Between Particles and Matrix Metal in Composite Coating on Its Electrocatalytic Function , - 1994, Prof. Hetong Guo, Qixian Qin, and Wei Wang, Department of Applied Chemistry, Tianjin University, Tianjin, P.R. China |
| Dual-Bath Plating of Composition-Modulated Alloys (CMA) Based on a Computer-Controlled Plating System , - 1994, [no author] |
| Electrochemical Regeneration of Chromating Solutions (AESF Research Project 89) , - 1994, Sergei Kruglikov, Alexander Anufriev and Julia Svirshevskaya, Mendeleyev University of Chemical Technology, Moscow, Russia |
| A History of Brush Plating , - 1994, R. Brookshire, Brushtronics Engineering, Laurel, MD |
| Automotive Gold Plating in Canada , - 1994, Peter and Paul Andaloro, Gold Merit of Canada |
| Aerospace Brush Plating , - 1994, Ron Brookshire, CEF, Hughes Aircraft, El Segundo, CA |
| Brush Plating and Environmental Concerns , - 1994, Chris Helwig and Jeff Hurrell, Brooktronics Engineering Corp., North Hollywood, CA |
| Automatic Brush Plating Through Single Anode Metallizing , - 1994, W.R. Wachtler, P.E., W.R. Associates Inc., Solana Beach, CA |
| Brush Plating Effectiveness for On-Site Repair , - 1994, Lester Simmons, Brushtronics Engineering, Laurel, MD |
| An Introduction to Physical Vapor Deposition (PVD) Processes , - 1994, Donald Mattox, SVC, Albuquerque, NM |
| Deposition of Tin & Other PVD Hard Coatings for Non-Cutting Tool Applications, - 1994, Mike Graham, BIRL, Northwestern University, Evanston, IL |
| Replacements for Hard Chrome Electroplating , - 1994, Keith Legg, BIRL, Northwestern University, Evanston, IL |
| Optical CoatingsþFrom Complex to Simple , - 1994, Gregory Caskey, Lakeshore Physics & Analytics, Holland, MI |
| Diamond-like Carbon & Sapphire Coatings , - 1994, Bruce Banks, NASA Lewis Research Center, Cleveland, OH |
| Wear-resistant Decorative Coatings on Writing Instruments , - 1994, Steven B. Tinkler and John H. Jacks, Parker Pen USA, Ltd., Janesville, WI |
| Federal Employment Laws that Strangle Employers , - 1994, Nancye Combs, HR Enterprises, Inc. |
| Making the Management Commitment to Statistical Process Control , - 1994, Yadi Kamelian, Lincoln Plating Company, Lincoln, NE |
| Structural Transformations in Electroless Ni-P-B Deposits , May - 1994, P. Sampath Kumar and P. Kesavan Nair |
| Electrode Filming in the Electrodeposition of Difficult-to-Plate Refractory Metals , May - 1994, Thomas C. Franklin, Venita Totten, Nellie F. Franklin and Neeta Sharma |
| Zinc Alloy Electrodeposition for Corrosion Protection , Jun - 1994, Majid R. Kalantary |
| Pyrophosphate Baths for Palladium-Nickel Alloy Coatings, Part I , Jun - 1994, Zbigniew Ratajewicz, Czesþaw Saneluta and J¢zef Sawa |
| Dry Corrosion of Electrochemically Aluminided Steels , Jun - 1994, P. Goeuriot, S. Kalogeropoulou and Y. Chryssoulakis |
| Zinc-Nickel Electroplate as a Replacement for Cadmium on High-Strength Steels , Jul - 1994, D.A. Wright, N. Gage and B.A. Wilson |
| Trivalent Chromium Solutions for Applying Chemical Conversion Coatings to Aluminum Alloys or for Sealing Anodized Aluminum , Jul - 1994, Fred Pearlstein and Vinod S. Agarwala |
| The Hydrodynamic Electroplating Test Cell , Jul - 1994, Shi-Chern Yen and I-Min Lu |
| Pyrophosphate Baths for Palladium-Nickel Alloy Coatings, Part II , Jul - 1994, Zbigniew Ratajewicz, Czeslaw Saneluta and Jozef Sawa |
| Nickel-Cobalt Diffusion Barrier Coating , Jul - 1994, J.S. Russo |
| Plated Through-Hole Processing: An Integrated Approach , Aug - 1994, Michael Carano |
| Surface Finishing: Is It an Art or a Science? At U.S. Can Ballonoff Plant, It's Both! Plating and Sur. Fin. Shop Visit, Sep - 1994, Liz Moran |
| Ron Parkinson Plating on Plastics: An Industry Review , Sep - 1994, [no author] |
| Polarographic Analysis of Hexavalent Chromium Rinsewaters , Sep - 1994, Nicholas M. Martyak |
| Hydrolysis of Sulfamate Ion in Nickel Sulfamate Solution , Sep - 1994, Chein-Ho Huang |
| A New Expendable Blast-Cleaning Abrasive Material: A Comparative Study of the Stefani Dolomite , Sep - 1994, Dimitris Kaliampakos |
| Cyanide-Free Electroless Gold Plating from a Bath Containing Disulfitoaurate and Thiourea or Its Derivatives , Sep - 1994, Y. Sato, T. Osawa, K. Kaieda and K. Kobayakawa |
| Recent Developments in Zn/Ni Alloy Plating; Higher Nickel Percent Plating , - 1994, Dr. Gary W. Loar McGean-Rohco, Inc. Cleveland, OH |
| Elimination of Ozone Depleting Chemicals and Implementation of New Cleaning Methods, - 1994, Cheryl A. Smith, Allied Signal Fluid Systems Tempe, AZ |
| An Aviation Component Hardware Parts Cleaning System , - 1994, David C. Freytag Malsbary Cleaning Systems Cincinnati, OH |
| Pollution Prevention: Treatment of Wastes from the Aerospace Industry , - 1994, Marc Halevy and Abbas Zaidi, Wastewater Technology Center (RockCliffe Research Management Inc.) Burlington, Ontario, Canada |
| Aerospace Corrosion , - 1994, James E. Graham Armoloy of Connecticut, Inc., Bristol, CT |
| Comparison of Alkaline Zinc Nickel and Acid Zinc Nickel as Replacement Coatings for Cadmium , - 1994, James A. Bates Pure Coatings Inc., West Palm Beach, FL |
| Zero Discharge Parts Cleaning Technology , - 1994, Kevin Whitall Durr Industries, Inc., Newark, CA |
| Measuring Surface Finish of Compressor Airfoils Protected by Environmentally Resistant Coatings, - 1994, Ron Lavoie, Hommel America Inc., New Britain, CT Bruce G. McMordie, Sermatech Materials Lab, Limerick, PA |
| Co-operation of Hazardous Chemical Reduction Program (I) , - 1994, Yosuke Miyazaki, Kawasaki Heavy Industries, Ltd. Aerospace Group Kakamigahara City, Japan |
| Co-operation of Hazardous Chemical Reduction Program (continued) , - 1994, Yosuke Miyazaki, Kawasaki Heavy Industries, Ltd. Aerospace Group Kakamigahara City, Japan |
| Closed-Loop Operation of Chromium Conversion Coating Operations in the Aerospace Industry , - 1994, Dr. Fred P. Reinhard Kinetic Recovery Corporation, Edina, MN |
| High-Priority Chemicals' Environmental Impact in the Aircraft and Parts Industry (I) , - 1994, Brian A. Manty, Dr. Eric W. Brooman and John W. Adams Concurrent Technologies Corp., Johnstown, PA |
| A Zinc-Nickel Alloy Electrodeposition, Tested to Cadmium Military Specifications , - 1994, Gary S. Tindall, Corpus Christi Army Depot, Corpus Christi, TX |
| Testing of Copper Plating by Rotating-Cone Electrode , May - 1994, By Darko Reichenbach |
| Electrode Filming in the Electrodeposition of Difficult-to-Plate Refractory Metals , May - 1994, Thomas C. Franklin, Venita Totten, Nellie F. Franklin and Neeta Sharma |
| Continuous Electrolytic Treatment of Complex Metal Cyanides with a Rotating Barrel Plater as the Cathode and a Packed Bed as the Anode , Jun - 1994, C.-D. Zhou and D.-T. Chin |
| Zinc Alloy Electrodeposition for Corrosion Protection , Jun - 1994, By Majid R. Kalantary |
| Pyrophosphate Baths for Palladium-Nickel Alloy Coatings, Part I , Jun - 1994, Zbigniew Ratajewicz, Czesþaw Saneluta and J¢zef Sawa |
| High Performance Gold Plating for Microdevices , Aug - 1994, A. Gemmler, W. Keller, H. Richter and K. Ruess |
| Electrolytic Deposition of Palladium-Iron Alloys , Aug - 1994, P. Juzikis, M.U. Kittel and Ch.J. Raub |
| Electrolytic Deposition and Properties of Alloys , Aug - 1994, Christoph J. Raub and Manfred E. Baumgartner |
| Effect of Heat Treatment on Corrosion Resistance of Nickel-Plated Steels Coated with Tin , Aug - 1994, T. Sonoda, S. Yoshimura, J. Ozaki, H. Nawafune and S. Mizumoto |
| The Effect of Monovalent Cations On Electroless Nickel Plating, Dec - 1994, Glenn O. Mallory and Konrad Parker |
| Preparation and Characterization Of a Colored Anodic Coating on Hot Dip Galvanized Steel, Dec - 1994, J.R. Cheng, T.R. Tan, J.Z. Qio, M.Y. Wu and H.C. Shih |
| Rotating Ring-disk Electrode Studies Of Copper Electrodeposition: Effect of Chloride Ions And Organic Additives, Dec - 1994, Sunghee Yoon, Morton Schwartz, CEF, and Ken Nobe |
| Powder Coatings: A Review of World Technical and Market Status, Dec - 1994, Matthew F. Osmond |
| Effect of Additive Conversion on Internal Stresses In Nickel Deposits, Dec - 1994, A. Bodnevas and J. Zahavi |
| For Ohio Hard Chromium Plater: "The Bigger the Better!", Oct - 1994, [no author] |
| Eliminating Substrate Defects, Oct - 1994, Dr. Allen R. Jones |
| EMI Shielding by Electroless Plating of ABS Plastics, Oct - 1994, N.V. Mandich, CEF |
| Some Possible Roles of Cathodic Films In Electrodeposition of Alloys, Part I, Oct - 1994, By Thomas C. Franklin and Venita Totten |
| Codeposition of Mixtures of Dispersed Particles With Nickel-Phosphorus Electrodeposits, Oct - 1994, By N. Periene, A. Cesuniene and E. Matulionis |
| Finish Adhesion, Durability Critical To Printing Press Production, Oct - 1994, [no author] |
| Chelants Prove Practical for Cleaning and Passivation of Stainless Steel Parts, Dec - 1994, Kenneth B. Balmer and Martin Larter |
| Design Criteria and Equipment Specifications for Metals Spray-Washing, Dec - 1994, William C. Wagner |
| Salt Bath Streamlines Metals Stripping, Apr - 1994, Jerry Dickson |
| Ultra-Clean Metal Begins With Electropolished Finish, Jan - 1994, R. Keith Raney |
| Variables and Vitals of Metal and Electronics Aqueous Cleaning, Jan - 1994, Malcolm McLaughlin |
| Cleaner Products Research Program, Oct - 1994, [no author] |
| Making the Move Toward Automation of Open-Top Cleaning Lines, Jun - 1994, Jonathan Aries |
| Safety Standards for Solvents and Systems, Jun - 1994, Steven M. Prisby |
| Advice and Council: AESF Comments on Proposed Rule Land Disposal Restrictions For Newly Identified & Listed Hazardous Wastes and Hazardous Soil, Jan - 1994, Frank Altmayer |
| Health and Safety: Common OSHA Citations and a Brief OSHA Regulatory Update, Apr - 1994, Peter Moleux |
| Advice and Council: Drivers and Barriers to Pollution Prevention in Metal Finishing, Jun - 1994, Frank Altmayer |
| Finishers' Think Tank, Jun - 1994, Marty Borruso |
| Bergen County Utilities Authority Heavy Metal Reduction Project, - 1994, [no author] |
| Pollution Prevention: A Holistic Approach, - 1994, Dr. David F. Ciambrone |
| Complying With the New Air Toxics Regulations Under the Clean Air Act Admendment, - 1994, Jeffery Glanders |
| Zinc Nickel Electroplate As A Replacement for Cadmium Electroplate on High Strength Steels, - 1994, D. A. Wright, N. Gage and B. A. Wilson |
| Guide to Cleaner Technologies - Organic Coating Replacements, - 1994, US Environmental Protection Agency, Office of Research and Development |
| Waste Reduction Technology Demonstrations Summary, - 1994, Mahannah, J. L. and Balasco, A. A. |
| Chromium Plating and Electropolishing Solution Analyses by Online X-Ray Fluorescence Spectroscopy., - 1994, Sopok, Samuel |
| Spray Coating of Metals. Proof of Concept. Phase 2., - 1994, Ploger, Scott A. and Berry, Ray A. and Hembree, Patricia B. and Key, James F. and Watson, Lloyd D. |
| In-Situ X-Ray Characterization of the Electrolyte-Solid Interface, - 1994, Hayes, T. M. |
| Electroplating of Refractory Metals Using Haloaluminate Melts, - 1994, Mamantov, Gleb |
| Guide to Cleaner Technologies - Alternative Metal Finishes, - 1994, US EPA |
| Precision Cleaning '94 Proceedings, - 1994, Davis, Peter G. |
| Guide to Cleaner Technologies - Alternatives to Chlorinated Solvents for Cleaning and Degreasing, - 1994, US Environmental Protection Agency, Office of Research and Development |
| Guide to Cleaner Technologies - Organic Coating Removal, - 1994, US Environmental Protection Agency, Office of Research and Development |
| Crossflow Microfiltration for Extending the Service Life of Aqueous Alkali Degreasing Solutions, January - 1993, Schwering, Hans, et. al. |
| Copper Recovery and Cyanide Destruction with a Plating Barrel Cathode and a Packed-Bed Anode, June - 1993, Zhou, C.D. and Chin, D.T. |
| Watts Nickel and Rinsewater Recovery Via an Advanced Reverse Osmosis System, October - 1993, Schmidt,C.;Erbas-White,I.;Ludwig,R. |
| Finisher's Think Tank, Oct - 1993, Marty Borruso |
| Finisher's Think Tank, Oct - 1993, Marty Borruso |
| Finisher's Think Tank, Oct - 1993, Marty Borruso |
| Putting Ergonomics to Work, Develop Programs to Minimize Work-Related Injuries and Accidents, Oct - 1993, Peter Moleux |
| Finisher's Think Tank, Nov - 1993, Marty Borruso |
| Finisher's Think Tank, Nov - 1993, Marty Borruso |
| Finisher's Think Tank, Nov - 1993, Marty Borruso |
| Finisher's Think Tank, Dec - 1993, Marty Borruso |
| Finisher's Think Tank, Dec - 1993, Marty Borruso |
| Finisher's Think Tank, Dec - 1993, Marty Borruso |
| Finisher's Think Tank, Dec - 1993, Marty Borruso |
| The Hunt for Quicksilver, Jan - 1993, Frank Altmayer |
| Fine Lines, Jan - 1993, Mike McChesney |
| Fine Lines, Jan - 1993, Mike McChesney |
| Finisher's Think Tank, Jan - 1993, Marty Borruso |
| Finisher's Think Tank, Jan - 1993, Marty Borruso |
| Finisher's Think Tank, Jan - 1993, Marty Borruso |
| Copper Strike Over Zinc Diecast, Jan - 1993, Marty Borruso |
| Small Hole Requirements for SMT, Jan - 1993, James P. Langan |
| PVD: Vacuum Evaporation Substrate Fixturing, Jan - 1993, Donald M. Mattox |
| Comparing Substitutes for Cr and Cu, to Prevent Pollution, Feb - 1993, Frank Altmayer |
| Location and Installation of Eyewash and Showers, Feb - 1993, Peter Moleux |
| Fine Lines, Feb - 1993, Mike McChesney |
| Fine Lines, Feb - 1993, Mike McChesney |
| Fine Lines, Feb - 1993, Mike McChesney |
| Fine Lines, Feb - 1993, Mike McChesney |
| Finisher's Think Tank, Feb - 1993, Marty Borruso |
| Finisher's Think Tank, Feb - 1993, Marty Borruso |
| Finisher's Think Tank, Feb - 1993, Marty Borruso |
| Copper Strike On Aluminum Zincate Coating, Feb - 1993, Marty Borruso |
| Stairs, Fixed Ladders, Aisles, and Exits, Mar - 1993, Peter Moleux |
| Fine Lines, Mar - 1993, Mike McChesney |
| Fine Lines, Mar - 1993, Mike McChesney |
| Finisher's Think Tank, Mar - 1993, Marty Borruso |
| Finisher's Think Tank, Mar - 1993, Marty Borruso |
| Finisher's Think Tank, Mar - 1993, Marty Borruso |
| Finisher's Think Tank, Mar - 1993, Marty Borruso |
| Barrel Cyanide Copper Strike For Zinc Diecast, Mar - 1993, Marty Borruso |
| A Dilemma In Surface Mount Technology, Mar - 1993, James P. Langan |
| Substrate Surface Preparation: Cleaning Environment, Mar - 1993, Donald M. Mattox |
| Surface Preparation - In Situ Cleaning, Apr - 1993, Donald M. Mattox |
| Chemical Laboratories and Fume Hoods, Apr - 1993, Peter Moleux |
| Finisher's Think Tank, Apr - 1993, Marty Borruso |
| Finisher's Think Tank, Apr - 1993, Marty Borruso |
| Finisher's Think Tank, Apr - 1993, Marty Borruso |
| Nuts & Bolts, Apr - 1993, Marty Borruso |
| Fine Lines, Apr - 1993, Mike McChesney |
| Complying With Cadmium Standards, Apr - 1993, Frank Altmayer |
| Advice for Installing a Conventional Waste Treatment System, May - 1993, Frank Altmayer |
| Electrodeposition: The Materials Science of Coatings and Substrate, May - 1993, Jack W. Dini |
| Fine Lines, May - 1993, Mike McChesney |
| Fine Lines, May - 1993, Mike McChesney |
| Finisher's Think Tank, May - 1993, Marty Borruso |
| Finisher's Think Tank, May - 1993, Marty Borruso |
| Finisher's Think Tank, May - 1993, Marty Borruso |
| Finisher's Think Tank, May - 1993, Marty Borruso |
| Nickel Sulfamate Strike Over Aluminum, May - 1993, Marty Borruso |
| Health and Safety, OSHA Confined Spaces Standards. Does This Permit-Required Regulation Apply to You ?, May - 1993, Martha S. Martin |
| Balancing Concerns and Technology, May - 1993, James P. Langan |
| Substrate Surface Preparation: Surface Modification, May - 1993, Donald M. Mattox |
| Fine Lines, Jun - 1993, Mike McChesney |
| Fine Lines, Jun - 1993, Mike McChesney |
| OSHA Tank Certification Requirements, Jun - 1993, Peter Moleux |
| Finisher's Think Tank, Jun - 1993, Marty Borruso |
| Finisher's Think Tank, Jun - 1993, Marty Borruso |
| High-Speed Cyanide Copper Deposits over Diecast, Jun - 1993, Marty Borruso |
| High-Speed Cyanide Copper Plate over Steel, Jun - 1993, Marty Borruso |
| Guidelines for Equipment Noise Control, Jun - 1993, Peter Moleux |
| Finisher's Think Tank, Jun - 1993, Marty Borruso |
| Finisher's Think Tank, Jun - 1993, Marty Borruso |
| Barrel Cyanide Copper Plating, Jul - 1993, Marty Borruso |
| Significant Violators, Aug - 1993, Frank Altmayer |
| Finisher's Think Tank, Aug - 1993, Marty Borruso |
| Finisher's Think Tank, Aug - 1993, Marty Borruso |
| Finisher's Think Tank, Aug - 1993, Marty Borruso |
| Finisher's Think Tank, Aug - 1993, Marty Borruso |
| Fine Lines, Sep - 1993, Mike McChesney |
| Fine Lines, Sep - 1993, Mike McChesney |
| Finisher's Think Tank, Sep - 1993, Marty Borruso |
| Finisher's Think Tank, Sep - 1993, Marty Borruso |
| Finisher's Think Tank, Sep - 1993, Marty Borruso |
| Using Sulfamate Nickel Strike for Preplating Nickel and Other Metals, Sep - 1993, Marty Borruso |
| Pollution Control and Hazardous Materials Minimization in a Printed Wiring Board Shop: A Case Study, Dec - 1993, R. Breitengross |
| Automated Deviations, Jan - 1993, Dave Cook |
| Solder Ball Study, Part III, Jan - 1993, Theo Langer Torsten Reckert |
| PCB Rx, Jan - 1993, [no author] |
| TQC Tools, Jan - 1993, Gray McQuarrie |
| Improving Fine-Line Uniformity, Feb - 1993, John Melonas Don Ball |
| PCB Primer, Feb - 1993, Steve Glass Jerry Thomsen |
| PCB Rx, Feb - 1993, [no author] |
| A Farewell to Pitting, Mar - 1993, Mukesh Jani Paul Diehl |
| Market/Buying, Mar - 1993, Peter Moleux |
| PCB Primer, Mar - 1993, Jerry Murray |
| Reducing Plating Voids, Apr - 1993, Mark Lefebvre |
| Improving Fine-Line Uniformity, Part II, Apr - 1993, John Melonas Don Ball |
| PCB Rx, Apr - 1993, [no author] |
| Rheology: Materials in Motion, Part I, May - 1993, Paul Kyle |
| Illuminating Imaging, May - 1993, Chris Bowles Brian Wojtkiewicz |
| A Multimedia Archiving System, May - 1993, Schmil Dolberg Chuck Feingold |
| Environmental Issues, May - 1993, Mabbett, Capaccio & Associates Inc. |
| Probing the Limits of the Dry-Film Resist, Jun - 1993, Karl H. Dietz |
| Artwork Inspection, Jun - 1993, Nancy Hallock |
| A Clean Sweep for the PCB Industry?, Jun - 1993, Elizabeth Clark |
| PCB Rx, Jun - 1993, [no author] |
| Drilling Today, Jul - 1993, Jerry Murray |
| PCB Primer, Jul - 1993, Robert W. Layton |
| Rheology: Materials in Motion, Part II, Aug - 1993, Paul Kyle |
| Markets/Buying, Aug - 1993, Richard Betz |
| Make or Buy: How to Decide?, Sep - 1993, Ed Westhaver |
| PCB Primer, Sep - 1993, George Funck |
| PCB Rx, Sep - 1993, [no author] |
| AOI for Process Control, Nov - 1993, Greg Blake |
| Tips for Fine-Line Finesse, Nov - 1993, Michael Walsh |
| Electroless Copper Alternatives, Nov - 1993, Harold Schiller Dan Gallegos Kevin Pittman |
| Moving-Probe Testing, Nov - 1993, Randy T. Allison |
| Test Points, Nov - 1993, Raymond Cronin |
| Evaluation of Bare-Board Finishes, Dec - 1993, Bob Willis Phil Hunter, John Porter |
| Speed, Waste, and Profitability, Dec - 1993, Gene Hendrickson Terri Volpe |
| Aging Plating Lines: To Replace or Reconfigure, Dec - 1993, Neil Baker |
| Book Review, Dec - 1993, Donna J. Esposito |
| Some Possible Roles of Cathodic Filming in the Electrodeposition of Alloys II , - 1993, Dr. T.C. Franklin, Baylor University, Waco, TX |
| Mechanism of Molybdenum and Molybdenum Carbide Electrodeposition from Molten Salt: A Review , - 1993, Prof. J. Robert Selman, Y.P. Lin and D. Topor, Illinois Institute Of Technology, Chicago, IL |
| Microdistribution of Nickel-Indium Alloys , - 1993, Sergei S. Kruglikov, Mendeleyev Institute of Chemical Technology, Moscow, Russia |
| Comparison of Light and Heavy Water Electrolysis with Palladium Cathodes , - 1993, Prof. John Dash, P.S. Keefe, E. Nicholas and D.S. Silver, Portland State University, Portland, OR |
| You Want to Electroform "A What?" , - 1993, Anthony J. Covey, Electroformed Nickel, Inc., Corona, CA |
| Electrochemical Joining , - 1993, William D.Bonivert and J.T. Hachman, Sandia National Laboratories, Livermore, CA |
| Electroforming as an Innovative Fabrication Technique for Advanced Tube-Bundle Rocket Thrust Chamber , - 1993, Glenn Malone, Electroformed Nickel, Inc., Irvine, CA |
| Electroforming is for Everyone , - 1993, Ron Parkinson, Nickel Development Institute, Toronto, Ontario, Canada |
| Optimization of Pulse Reverse Chromium Plating Based on the Knowledge of the Crystallization Mechanism , - 1993, Dr. Peter Leisner, G. Bech-Nielsen and P. Moller, The Technical University of Denmark (CAG), Lyngby, Denmark |
| Surface Treatment with Underpotential-Deposited-Bismuth for Inhibition of Corrosion and Migration of Hydrogen Absorption into Inconel 718 , - 1993, G. Zheng, Prof. R.E. White and B.N. Popov, University of South Carolina, Columbia, SC |
| Galvanostatic Pulse Plating of Fe-Ni Alloys , - 1993, B.N. Popov, Ken-Ming Yen and R.E. White, University of South Carolina, Columbia, SC |
| Surface Treatment for Migration of Hydrogen Absorption into 4130 Steel , - 1993, B.N. Popov, G. Zheng and R.E. White, University of South Carolina, Columbia |
| Modeling of Anomalous Codeposition for the Binary Iron-Group Alloys , - 1993, Keith Y. Sasaki and Jan B. Talbot , University of California, San Diego, La Jolla, CA |
| The Development of a New Electroanalytical Device for Monitoring and Maintaining Plating Bath Chemistry , - 1993, Dr. Nguyet H. Phan, Frank Ludwig, Bruce Eliash and Vilambi Reddy, The Aerospace Corporation, Los Angeles, CA |
| Consideration for Selecting Organic Dyes , - 1993, Dr. G. Tscheulin, Sandoz Products, Ltd., Basel, Switzerland |
| Chemical Pretreatment of Aluminum Prior to Anodizing , - 1993, Chris Hanthorn, Novamax Technologies, Inc., Atlanta, GA |
| The Black Dye Solution Used for Dyeing Anodic Coatings: Bringing Its Control into the 90s , - 1993, Ward Barcafer and LeeAnne Hardy, CAI Technologies, Denver, CO |
| Aluminum Cathodes, the Anodizer's Energy-Saver , - 1993, Charles A. Grubbs, Sandoz Chemical Corp., Charlotte, NC |
| Selection of Correct Sealing Products , - 1993, Pinakin Patel, Sandoz Chemical Corp., Charlotte, NC |
| Porous Layer Barrier & Porous Layer Growth & Anodizing , - 1993, Xavier Albert Ventura, Electroplating Consultant, Barcelona, Spain |
| Pulse Anodizing of Aluminum Alloys in Sulfuric Acid , - 1993, Jean Rasmussen, M. Eis and P. Moller, Centre of Advanced Electroplating, Lyngby, Denmark |
| Metal Loading Study for the Milwaukee Surface Finishing Industry, 1989-1991: Findings and Conclusions , - 1993, John S. Lindstedt, Artistic Plating Company, Inc., Milwaukee, WI |
| Themes for Terrific Teams , - 1993, Ray Larson, Larson Associates, Brea, CA |
| On-Site Management Training , - 1993, Bert J. Sherwood, Sherwood Business Management Corporation, Los Angeles, CA |
| A General Overview of Environmental Regulations and Current Insurance/Risk Management Techniques Available to Address These Environmental Impairment Liability (EIL/Pollution) Exposures , - 1993, E. Michael Hoke, CPCU, American Business Insurance Southeast, Tampa, FL |
| A New Post-Treatment for Electroless Nickel: Non-Chromate Passivation , - 1993, Hong Deng, M.Sc. and Dr. Per Moller, Centre of Advanced Electroplating (CAG), Lyngby, Denmark |
| The Effect of Monovalent Cations on the Electroless Nickel Plating Bath , - 1993, Glenn O. Mallory, Electroless Technologies Corp., Los Angeles, CA, and Konrad Parker, Consultant, Park Ridge, IL |
| Advances in Electroless Nickel and Post Treatments for Enhanced Corrosion Protection of Aluminum Connectors , - 1993, Peter Vignati and Mark Zitko, Enthone-OMI, Inc., West Haven, CT |
| A Liquid Ion Exchange Process for Recovering Nickel from Spent Electroless Nickel Plating Baths , - 1993, Dana Elliot, Wayne Henkels, Dr. Frank Jahnke and Dr. Phillip Mattison, Cognis, Inc., Santa Rosa, CA |
| Implementing a Waste Minimization Strategy on Your Copper/Solder Line , - 1993, Paul W. Fecsik and Bruce T. Miller, Hughes Missile Systems Company, Tucson, AZ |
| Evaluation of Avionics Conformal Coatings Performance by Electrochemical Impedance Spectroscopy , - 1993, M. Ken Han, Battelle Memorial Institute, Columbus, OH |
| Statistical Modeling of Printed Circuit Hole Plating , - 1993, George S. Bokisa and Charles W. McFarland, McGean-Rohco, Inc., Cleveland, OH |
| Effect of Metallurgical Variations on Solder Performance in HASL Systems: A Process Characterization for Vertical HASL , - 1993, Gary A. Wolf, RFE Industries, Inc., Keasbey, NJ |
| Immersion, Non-Electrolytic, Tin/Lead Plating Process , - 1993, E.C. Couble, O.B. Dutkewych, S.M. Florio, M.V. Marsh and R.F. Staniunas, Shipley Company, Inc., Newton, MA |
| Characterization and Optimization of a Hot-Air Solder-Leveling System , - 1993, Robert R. Penniston, Jr. and David A. Stockdale, Allied-Signal Inc., Kansas City, MO |
| Alkaline Electroplating of Zinc-Nickel Alloys , - 1993, William D. Bonivert, Robert W. Bradshaw and Dale R. Boehme, Sandia National Laboratories, Livermore, CA |
| Tin-Zinc Alloy Plating: A Non-Cyanide Alkaline Deposition Process , - 1993, S.J. Blunden, International Tin Research Institute, Middlesex, England, and A.J. Killmeyer, Tin Information Center of North America, Columbus, OH |
| Factors Influencing the Codeposition of Zinc-Chromium Alloys , - 1993, M.R. El-Sharif, Y.J. Su and C.U. Chisholm, School of Engrg., Glasgow Caledonian, Glasgow, UK, and A. Watson, Dept. of Chem., Paisley University, UK |
| Trends in Alloy Plating in Japan , - 1993, Dr. Tadao Hayashi, University of Osaka Prefecture, Osaka, Japan |
| Co-Deposited Alloys of Zinc-Iron and Zinc-Nickel vs. Cadmium Characteristics-- Corrosion Resistance Comparisons , - 1993, Ray Dargis and Paul Frank, McGean-Rohco, Inc., Cleveland, OH |
| Pulse Plating of Tin/Zinc Alloys , - 1993, Jean Rasmussen, Centre of Advanced Electroplating, Nordborg, Denmark |
| Electrolytic Deposition and Properties of Alloys , - 1993, Christoph J. Raub and Manfred E. Baumgartner, Forschungsinstitut fr Edelmetalle und Metallchemie, Schw„bisch Gmnd, Germany |
| Brush-Plated Coatings for the Processing of Light Metals , - 1993, Jeffrey Hurrell, Brooktronics Engineering Corporation, North Hollywood, CA |
| Cold Fusion Coatings , - 1993, William R. Wachtler, P.E., Metafuse Corp., San Diego, CA |
| The Single-Anode Machine (SAM) Automation of Brush Plating , - 1993, Robert Penrose, W.R. Associates, Inc., Solana Beach, CA |
| Pollution Prevention Potential at an Aircraft Repair Facility , - 1993, George Cushnie, CAI Engineering, Oakton, VA |
| Brush Nickel Repairs on Cast Aluminum Housings , - 1993, Geoff Simms, NIACC Technology, Inc., Fresno, CA |
| Pitfalls Between Training and Application , - 1993, Joe Curtis, LDC of Virginia, Norfolk, VA |
| Management of the Brush Plating Job Shop , - 1993, Scott Robison, LDC of Virginia, Norfolk, VA |
| An Overview of Brush Plating: Current Technology & Expertise , - 1993, Garry F. Byrne, Dalcan Services Ltd., Burlington, Ontario, Canada |
| Zi-Ni Alloy Selective (Brush) Plating for Spot Repairs , - 1993, Michael Moskowitz, Sifco Selective Plating, Cleveland, OH |
| Electrophoretic Deposition: A New Answer to Old Questions , Aug - 1993, Jonothan Holland and Robert Berger |
| Hydrogen in Electrodeposits: Of Decisive Importance, But Much Neglected, Sep - 1993, Christoph J. Raub |
| An Examination of Paybacks for an Aqueous Cleaner Recovery Unit , Sep - 1993, Stanley R. Karrs and Michael McMonagle |
| Solderability Degradation by Steam Aging , Sep - 1993, D.M. Tench, D.P. Anderson, G.K. Lucey, B. Piekarski and L. Lichtenberg |
| Cold Sealing Mechanism of Anodic Oxide Films on Aluminum Part I: Composition and Structure of Cold-Sealed Oxide Films , Sep - 1993, Yi Li, Zufang Zhu, Zhiyu Jiang and Manming Yan |
| Powder Coating: An Environmentally Friendly Alternative to Electroplating , Oct - 1993, P.R. Osborn |
| Characteristics of Electro-Codeposition of Cobalt-Titania Composites , Oct - 1993, E.P. Rajiv and S.K. Seshadri |
| Nickel Electrodeposits with Improved Hot Oxidation and Corrosion Resistance by Codeposition of Submicron Powders , Oct - 1993, N. Perien, L. Taicas |
| Cold Sealing Mechanism of Anodic Oxide Films on Aluminum Part II: Cold Sealing Models of Oxide Films , Oct - 1993, Yi Li and Zufang Zhu |
| Limit of Detection Methodologies , Oct - 1993, John Lindstedt |
| Critical Evaluation of a Cold Phosphating Bath , Sep - 1993, T.S.N. Sankara Narayanan and M. Subbaiyan |
| Aluminum Deposits on 42CD4 Steel Substrates by Molten Salts Electrolysis , Aug - 1993, S. Kalogeropoulou, Y. Chryssoulakis, L. Gregoire and G. Moortgat |
| Multibath Conditioning--A Step Toward the Closed Loop , Aug - 1993, Max I. Stein, CEF |
| The Mechanical Behavior of Electroplated Copper at Elevated Temperatures , Aug - 1993, K. Lin and K.G. Sheppard |
| Cracking of Anodized Coatings on Aluminum , Aug - 1993, R.S. Alwitt and R.C. McClung |
| Limit of Detection Methodologies , Oct - 1993, John Lindstedt |
| A Clean Way to Plate Precious Metals Plater Finds Practical Solutions for Pollution Control , Oct - 1993, [no author] |
| World Environment Center's Waste Minimization Demonstration Projects for the Electroplating/Metal Finishing Industry in Latvia , Nov - 1993, Stephen D. Couture, Paul E. Thorson, Gretchen Mikeska, Prabodh Shah, Nataly Ladutko and Brenton Harding |
| ISO 9000: What Do Shop Managers Say About It? , Nov - 1993, Don Berry, AESF Staff |
| ISO 9000--The European Experience , Nov - 1993, Bev Sewell, Twickenham Plating Group, Brentford, England |
| ISO 9000--Changing Quality Standards in America and the World , Nov - 1993, Paul Piplani, Southwest United Industries, Tulsa, OK. |
| In Search of Closed Processes in the Swedish Surface Finishing Industry , Nov - 1993, Osten Ekengren, Staffan Filipsson, Jonas Tolf and Lars Clarin |
| Alternatives to MACT: Chromium Air Emission Reduction Studies , Nov - 1993, Carol Huston, CEF |
| Diffusion Behavior of Copper Through Electroplated Silver Leadframes , Nov - 1993, Shinichi Wakabayashi, Takahiro Iijima, Masao Nakazawa, Norio Kaneko and Hiroyuki Nezu |
| Robust-Design of a Metallization Process for Ceramic Substrates , Nov - 1993, H.H. Law, C.A. Mattoe, J. Thomson, Jr., T.E. Smith and R. Zappulla |
| The Rotating Cylinder Hull Cell: Design and Application , Nov - 1993, C. Madore and D. Landolt |
| Cathode Polarization in Trivalent Chromium Plating , Nov - 1993, Zhenmi Tu, Zhelong Yang, Jingshuang Zhang, Mao-Zhong An and Wen-Liang Li |
| Evaluation of Performance Test Methods for an Aqueous Cleaner , Dec - 1993, Thomas M. Tam, Ralph Wyngarden and Anthony F. Naylor |
| On the Mechanisms of Plating on Plastics , Dec - 1993, N.V. Mandich, CEF and G.A. Krulik, CEF |
| Nickel Preplated Tinplate--A Tinplate with Inhibition of the Fe-Sn Alloy Layer Growth (2) , Dec - 1993, Rodnei Bertazzoli, Claudia S.C. Aoki, Margarita B. Santos and Ettore Bresciani |
| Sealing of Electrolytically Formed Porous Films of Aluminum by Nickel Fluoride Process , Dec - 1993, Majid R. Kalantary, D.R. Gabe and D.H. Ross |
| Ion Vapor Deposition of Aluminum , - 1993, Brian T. Nevill |
| IVD: Eliminating Tank Electroplating Solutions for Cadmium , - 1993, Deborah Lansky |
| An Electroplater's View of PVD Processing , - 1993, J.W. Dini |
| Composition, Structure and Morphology of Cu-Zn Alloy Deposits from Pyrophosphate Baths , - 1993, Yutaka Fujiwara and Hidehiko Enomoto |
| Laser Melting Treatment of Thick Chromium Electrodeposits on Brass Substrate , - 1993, Pandora Psyllaki, Stelios Polymenis, Yannis Chryssoulakis and Dimitris Pantelis |
| Electroless Copper Plating on PVC Composites as Affected by Organic Acids , - 1993, M. Hassib Abbas and A.A. Abd El-Hakim |
| 1-Dodecyl Xanthate as a Phosphating Additive: Aspects of Chemistry and Corrosion Protection , - 1993, Usha B. Nair and M. Subbaiyan |
| Storm Water Management for the Electroplating and Surface Finishing Industry , - 1993, Michael A. Collins, Woodward-Clyde Consultants, Houston, TX |
| Metals Loading Study: Metal Finishing Industry, 1989 to 1991, Findings and Conclusions, - 1993, John S. Lindstedt, Artistic Plating, Inc., Milwaukee, WI |
| A Pound of Prevention ... - Challenging Permit Limitations Before They Challenge You , - 1993, Michael J. Meagher, Esq., Godwin, Procter & Hoar, Boston, MA |
| The Clean Air Act - Compliance Options for Electroplaters and Surface Finishers , - 1993, Larry K. Sibik, Capsule Environmental Engineering, Inc., St. Paul, MN |
| Metal Finishing Ventilation Design , - 1993, Arthur J. Boehm |
| Diffusion Dialysis - An Economical Technology for Recovery of Acids from Pickling Processes , - 1993, Andreas Deuschle, OSMOTA Membrantechnik GmbH, Germany |
| Crossflow Microfiltration for Extending the Service Life of Aqueous Alkali Degreasing Solutions , - 1993, Hans Schwering, Peter Golisch and Alan Kemp |
| Maintenance of Electroplating and Pickling Baths - the Key for the Minimization of Waste , - 1993, A. Moebius |
| A Design of Experiments to Optimize Copper Cleaning and Achieve Waste Minimization , - 1993, Dave Peterson, Modine Manufacturing Co., Racine, WI |
| A Methodology to Minimize Rinsewater Use at Pratt & Whitney , - 1993, John Zavodjancik, Pratt & Whitney, East Hartford, CT |
| Alternate Cleaning Technology (ACT) - A Corporate Approach for the Aerospace Industry , - 1993, Frank A. Marino, Raytheon Co., Lexington, MA |
| A Systematic Method to Address Solvent Use in Handwiping Operations , - 1993, Susan Nerkowski and David Garriepy, United Technologies Pratt & Whitney |
| Development of Closed-Loop Chemistry/Water Recycling for Aqueous and Semi- Aqueous Formulations , - 1993, Jerry Matthews, Dow Chemical Co., Midland, MI, and Kenneth Seufer, Kinetico Engineered Systems, Inc., Newbury, OH |
| Elimination of Chlorinated Solvents at Modine Manufacturing: An Integrated Approach , - 1993, Dave Peterson, Modine Manufacturing, Racine, WI |
| Reducing Use of Ozone-Depleting Substances and Chlorinated Solvents at McClellan AFB , - 1993, James E Thom, CH2M Hill, Corvallis, OR and Lance Lankford, McClellan AFB, CA |
| A New Process Alternative for Replacing Ozone-Depleting Solvent Cleaners - Advanced Vapor Degreasing (AVD Process) , - 1993, Frank A. Marino, Raytheon Company, Lexington, MA |
| Swedish Environmental Protection Agency Initiatives to Minimize Discharge of Metals , - 1993, Osten Euengren, Lars Clarin and Magnus Klingspor, Swedish Environmental Research Institute, Stockholm, Sweden |
| United Technologies' Research Center's Role in Its Environmental Initiative , - 1993, Dr. Gerald Golden, United Technologies Research Center, East Hartford, CT |
| Pollution-Free Plating Machines for Use in Workshops , - 1993, Allan H. Jensen, Johan C. Gregersen and Dr. Leo Alting |
| Utilization and Practical Application of Ion Exchange , - 1993, Dr. Fred P. Reinhard, Kinetic Recovery Corp., Edina, MN |
| Case Study: Achieving Stringent Toxicity Limits at a Job Plating Shop with Waste Minimization and End-of-Pipe Treatment , - 1993, Bill Williams and Paul Schaffman, Consulting Environmental Engineers, Inc., West Hartford, CT; Scott Backus and George Steir, Har-Conn Chrome Co., West Hartford, CT |
| General Electric Moves Toward Closing the Loop at Their North Carolina Facility , - 1993, Lloyd Wentler, GE, and Stephen Perrone, Aqualogic Inc./FPI Systems |
| Wastewater Management for the Metal Finishing Industry in the 21st Century , - 1993, David Drake, CH2M HILL, Milwaukee, WI and Peter Gallerani, Integrated Technologies, Cheshire, CT |
| Waste Minimization Program Implemented at Hamilton Standard through Optimization of Wastewater Treatment System , - 1993, Robert W. Jenkins, Hamilton Standard, East Windsor, CT and Robert M. Sacco, Ionics, Inc., Watertown, MA |
| Electroplating Effluent Polishing Using Tertiary Ion Exchange, A Case Study , - 1993, John Lindstedt and Ernestine Wagner, Artistic Plating Co., Milwaukee, WI |
| An Industrial Pretreatment Program That Works Carl , - 1993, A. Nowak, City of Grand Rapids, Grand Rapids, MI |
| Sludge Recycling vs. Waste Minimization , - 1993, Stratton G. Tragellis, Memtek Corp., Billerica, MA |
| Recycling Effluent of Conventional Wastewater Precipitation Treatment via Ion Exchange and Evaporation , - 1993, Stephen Zapisek, Richardson Electronics, Ltd., LaFox, IL |
| On-Line Determination of Chromium Thickness During Plating, Feb - 1993, A. Abbate, J. Frankel and M. Doxbeck |
| High-Resolution Electron Microscopy of the Iron-Zinc Delta Intermetallic Phase Final Report -AESF Summer 1992 Research Grant , Feb - 1993, Lucille A. Giannuzzi, Atul S. Ramani, Paul R. Howell, Howard W. Pickering and William R. Bitler Plating and |
| Electroless Nickel Plating from an Acidic Tartrate Bath , Feb - 1993, T. Mimani and S.M. Mayanna |
| A Wear-Resistant Composite Coating , Feb - 1993, Xinmin Huang and Zonggang Deng |
| Alternatives to Cadmium Coatings for Electrical/Electronic Applications , Feb - 1993, Eric. W. Brooman |
| Practical Pollution Abatement Methods for Metal Finishing , Feb - 1993, Craig V. Bishop and Gary. W. Loar |
| How to Grow Pure Metal Coatings: Ion Beam Enhanced Deposition of Conductive Metallic Coatings , Feb - 1993, Arnold H. Deutchman and Robert J. Partyka |
| Characterization of Amorphous Ni-Cr-P Electrodeposits , Mar - 1993, Terry R. Guilinger, James E. Voytko, Ralph E. White and Ken-Ming Yin |
| Influences of a Wetter and Other Plating Metals on Removal of Dissolved Nickel Metal , Mar - 1993, Chein-Ho Huang and A.C. Chen |
| Effect of Agitation in Electroless Nickel Deposition , Mar - 1993, K. Sevugan, M. Selvam, K.N. Srinivasan, T. Vasudevan and P. Manisankar |
| An Improved Method for Measuring Phosphorus Using Spectrophotometry , Mar - 1993, J.L. Mullen |
| In-Tank Filtration for the Anodizing Industry , Mar - 1993, Gene Horvath and Steve Isham |
| Eliminating 1,1,1-Trichlor Vapor Degreasing in Aerospace Repair Applications , Mar - 1993, Glenn Travis and Cynthia Boster |
| Organic and Ionic Soil Removal by Vapor Degreasing with a Heterogeneous Azeotrope of Perchloroethylene and Water , Mar - 1993, Eric L. Mainz, Vulcan Chemicals R&D Center, Wichita, KS |
| Metals Loading Study Supports Milwaukee Finishers' Stand Against Regulations , Apr - 1993, John S. Lindstedt |
| Electrolytic Preparation of Sm-Co Thin Films and Their Magnetic Properties , Apr - 1993, Yuichi Sato, Tomoyo Takazawa, Masatoshi Takahashi, Hiroshi Ishida and Koichi Kobayakawa |
| A Versatile Non-Cyanide Gold Plating System , Apr - 1993, Ronald J. Morrissey |
| Structure and Properties of Electroless Nickel-Boron Alloy , Apr - 1993, Hongzhe Zhang, Xun Jun Zhang and Yun Kun Zhang |
| Case Study: Achieving Stringent Toxicity Limits at a Job Plating Shop with Waste Minimization and End-of-Pipe Treatment , Apr - 1993, Bill Williams, Paul Schaffman, Scott Backus and George Steir |
| A New Process Alternative for Replacing Ozone-Depleting Solvent Cleaners , Apr - 1993, Frank A. Marino |
| Stormwater Management for Finishers: How to Prepare an SWPPP , Apr - 1993, Michael A. Collins |
| The OSHA Cadmium Standard - Tough Schedule/New Compliance Concepts , Apr - 1993, Arthur J. Boehm |
| The L-S II Electro-Galvanizing Facility , - 1993, R.C. Tinsley, L-S Electrogalvanizing Co., Cleveland, OH and H. Nakai, L-S Electro-Galvanizing Co., Columbus, OH |
| An Outline of Armco Steel Company's No. 2 Electrogalvanizing Line , - 1993, E.A. Williams, Armco Steel Company L.P., Middletown, OH and T.R. Heckard, Armco Research & Technology, Middletown, OH |
| No. 2 Electrolytic Galvanizing Line at Kashima Steel Works , - 1993, Haruhito Onishi, Takuya Motoyama, Takashi Shiohara and Tsuyoshi Hattori, Sumitomo Metal Industries, Ltd., Ibaraki Prefecture, Japan |
| Description of I/N Kote's New Gravitel Electrogalvanizing Line, - 1993, Mark S. Blaser and L. Alberti, I/N Kote, New Carlisle, IN |
| Tension Leveling Systems in Electroplating Lines , - 1993, Thomas F. Hazen, Herr-Voss Corp., Callery, PA |
| An Efficient Recovery System for Metal Ions from Electrogalvanizing Effluents , - 1993, Katsumi Okutani, Tadashi Nonaka, Hiroshi Ohishi and Tetsuaki Tsuda, Sumitomo Metals Industries, Ltd., Wakayama Steel Works, Wakayama City, Japan |
| The New Electrogalvanizing Line of Usiminas, Brazil, - 1993, R.E. Souza, J.G. de Souza and A. Ignacio, Usiminas, Brazil, and Gerald Maresch, Maschinenfabrik Andritz, Ruthner Division, Vienna, Austria AESF |
| Experience with Durasteel at VOEST-ALPINE Stahl Linz and Development Results on Other Organic-Coil-Coating Systems , - 1993, F.M. Androsch, K. Kosters and W. Schiefermoler, VOEST-ALPINE AG, Linz, Austria |
| Electrogalvanized Zinc: Crystal Orientation and Corrosion Behavior , - 1993, James H. Lindsay and Mark Yergin, General Motors Corporation, Warren, MI, and C. Ramadeva Shastry, Bethlehem Steel, Bethlehem, PA |
| Properties of Zn-Co-Cr-Al2O3-Composite-Coated Steel Electroplated from the Sulfate Bath , - 1993, Kazuo Mochizuki, Shigeru Kurokawa, Nobuyuki Morito, and Toshio Ichida, Kawasaki Steel Corporation, Chiba, Japan |
| Electrodeposition Behavior and Properties of BaCrO4-dispersed Zn-Ni Alloy Coating , - 1993, Makoto Yoshida and Teruaki Izaki, Yawata R&D Lab, Technical Development Bureau, Nippon Steel Corporation, Fukuoka, Japan |
| On-Line Measurement Instrumentation for Quality Assurance and Control , - 1993, Michael H. Norbury, Jr., Data Measurement Corporation, Gaithersburg, MD |
| Detrimental Effects of Lead Contamination in Zinc and Zinc-Nickel Alloy Electroplating , - 1993, Bruno Cauwe, Lucien Renard and Alain Weymeersch, R & D Cockerill Sambre Group, Domaine Universitaire du Sart Tilman, Liege, Belgium |
| Characterization of Different Types of Staining on Electrogalvanized Surfaces Using a Variety of Analytical Techniques , - 1993, J.H. Martin and C. Flake, Armco Research & Technology, Middletown, OH |
| A Study of Strip Plating TFS with Granular Metallic Chromium , - 1993, Hiroki Iwasa, Hideki Nishihara, Toyofumi Watanabe, NKK Corporation, Hiroshima-PRF, Japan |
| New Development in the Area of High-Current-Density Tin-Free Steel Process (HCD-TFS) , - 1993, Martine Develay, Davy McKee Corporation, Pittsburgh, PA, and I. J. Kharouf, USX Engineers and Consultants, Inc., Pittsburgh, PA |
| Economic Aspects of Reactor Design for Strip Plating Cells , - 1993, B.K. Paramanathan and G.C. Van Haastrecht, Hoogovens, Ijmuiden, Netherlands |
| Some Effects of Plating Bath Variables on the Quality Performance of a Halogen Tinning Line , - 1993, Richard N. Steinbicker, Homer Research Labs, Bethlehem Steel Corporation, Bethlehem, PA |
| Liquid Back-Flush System: Extending the Life of PSA Through Filtration, - 1993, Frank Russo and Michael Palmer, Filtration Engineering, Portland, PA |
| Electrotinning with the Gravitel Process , - 1993, W. Szokol and Gerald Maresch, Maschinenfabrik Andritz, Ruthner Division, Wien, Austria |
| Electrochemical Achievement of Composite Materials Involving Steel Sheets , - 1993, Jean Schrynemackers, R & D Cockerill Sambre, Liege, Belgium, and M. Mertens, C. Calberg, R. Jerome and L. Martinot, University of Liege, Liege, Belgium |
| Influence of Certain Additives on Anomalous Deposition of Zn-Ni and Zn-Co Alloys, - 1993, Thomas J. O'Keefe and Hung-Ming Wang, University of MissouriþRolla, Rolla, MO |
| Mathematical Analysis of the Relative Velocity in the Up and Down Passes of the Gravitel Cell As It Relates to Zn-Ni Alloy Plating, - 1993, Yung-Herng Yau, Homer Research Laboratories, Bethlehem Steel Corporation, Bethlehem, PA |
| The Effect of Current Density and Line Speed on the Nickel Content of Zn/Ni Electroplated Steel Strip Produced on a Gravitel Line, - 1993, F.H. Guzzetta and D. Nix, Armco Steel Company, Middletown, OH, and J.A. Heitzenrater, Armco Research & Technology, Middletown, OH |
| Improved Titanium Anode Technology for High Speed Electroplating Systems , - 1993, Kenneth L. Hardee, L. M. Ernes, ELTECH Research Corporation, Fourport Harbor, OH, and T.E. Moore, PreFinish Metals, Inc., Walbridge, OH 1993 |
| Vapor Deposition as a High-Rate Coating Process for Steel Strip , - 1993, G. Goldschmied and W. Karner, Maschinenfabrik Andritz, Ruthner Division, Wien, Austria |
| Hydrogen Absorption in Steel During the Preplating Process , - 1993, J.H. Payer, S.L. Amey and G.M. Michal, Department of Materials Science and Engineering, Case Western Reserve University, Cleveland, OH |
| Electrogalvanizing with Insoluble Anodes and a Chloride Electrolyte , - 1993, Gerald Maresch and Wilnem Karner, Maschinenfabrik Andritz, Ruthner Division, Wien (Vienna), Austria |
| Anodic Pulse Enhanced Electrocrystallization (APEX) Of Tin , May - 1993, Chong Ho Sonu and Thomas J. O'Keefe |
| Synergistic Coatings...Doing the "Impossible"? , May - 1993, Plating and Sur. Fin. Staff Report |
| Remediating a Former Plating Shop: Health Protection for Workers and Future Tenants , May - 1993, Kenneth E. Fischer |
| Stewart Hildred Making a Mint , Jun - 1993, [no author] |
| Electroless Nickel is One of Pittsburgh Plater's Mainstay Processes Plating and Sur. Fin. Shop Visit, Jun - 1993, [no author] |
| For Aluminum Window/Door Fabricator: Powder Coating is Finish of Choice Plating and Sur. Fin. Shop Visit, Jul - 1993, [no author] |
| MetoKote Gives John Deere an Out-Source In-House , Jul - 1993, Plating and Sur. Fin. Staff Report |
| Double Eagle Plates Steel for Automobiles , Jul - 1993, Plating and Sur. Fin. Staff Report |
| Pretreatment Process Makes It Possible: Painting on Vinyl Plating and Sur. Fin. Shop Visit, Jul - 1993, [no author] |
| Membrane Diffusion of Neutral Species for Recovery AESF Summer Grant Project SG22 (1992) , Jul - 1993, Mark M. Benjamin |
| Electrodeposition of Thick and Bright Silver-Germanium Alloy Coatings , Jul - 1993, M. DeBonte, J.P. Celis and J.R. Roos |
| Micro-method of Surface Roughness Measurement with SEM , Jul - 1993, Wing-yan Ng, Kwan-dick Chan and Ming-kong Lau |
| Some Peculiarities of Cathodic Behavior of Brightener Additives in Nickel , Jul - 1993, A. Bodnevas and J. Zahavi |
| Polarographic Analysis of Electro(less) Deposition Solutions , - 1993, Nicholas M. Martyak, Monsanto Company, St. Louis, MO (Now at Atotech, NJ) |
| Plating Test Interpretation and Information on Various Plating Cells and Cathodes , - 1993, Vijay K. Kansupada, James V. Pavlish and Jayshree Dalal, Pavco, Inc., Cleveland, OH |
| New Developments using CVS to Analyze Individual Components in Non-Fluoborate Tin-Lead Baths Rita Gluzman, , - 1993, Dr. Peter Bratin, Dr. Jack Rickly and Jim Morris, ECI Technology, East Rutherford, NJ |
| Capillary Electrophoresis, a New Technique for the Semiconductor and Plating Industries , - 1993, Dr. Mary Jo Wojtusik, Dionex Corporation, Sunnyvale, CA |
| Analytical Laboratory Automation for the Electroplating Shop , - 1993, Dr. David A. Stern and John J. Urh, Leeman Labs, Inc., Lowell, MA |
| The Evaluation of On-line Performance Test Methods for Aqueous Cleaners for Metal Surface Finishing Processes , - 1993, Thomas M. Tam, Ralph Wyngarden and Anthony F. Naylor, Lockheed Missiles & Space Company, Inc., Sunnyvale, CA |
| Energy Dispersive X-ray Spectrometers for the Elemental Analysis of Plating Baths , - 1993, Azucena Overman, ASOMA Instruments, Inc., Austin, TX |
| ISO 9000: Can You Afford It? Can You Afford Not To Have It? , - 1993, Bev Sewell, Twickenham Plating & Enamelling Co. Ltd., Brentford, Middlesex, England |
| ISO 9000--Changing Quality Standards in America and the World , - 1993, Dr. D. Paul Piplani, CEF, Southwest United Industries, Tulsa, OK |
| Measurement Performance Analysis of Plating Chemistry: A Tool to Reduce Variation , - 1993, Wayne Wenske, ASQC-CQE, Kohler Company, Kohler, WI |
| How to Louse Up Experiments: Common Mistakes in Designed Experiments , - 1993, David J. Sugg, Worthington Steel, Malvern, Malvern, PA |
| TQM is Dead, Long Live TQM , - 1993, Paul Horgan, Quality Golden West, Yorba Linda, CA |
| Cleaning Equipment: Aqueous vs. Vapor Degreasing , - 1993, Boyd J. Smith, FPI Systems, North Haven, CT |
| An Examination of Paybacks for an Aqueous Cleaner Recovery Unit , - 1993, Stanley R. Karrs, U.S. Filter, Inc., Warrendale, PA, and Michael McMonagle, Superior Plating, Inc., Minneapolis, MN |
| Study of a New Electropolishing Process for Stainless Steel Tubes , - 1993, J.P. Caire, E. Chainet, B. Nguyen and P. Valenti, Centre de Recherche en Electrochimie Minerale et Genie des Procedes, Saint Martin d'Heres, France |
| PLCs and Computer Control of Plating/Finishing Lines--Options & Choices , - 1993, Donald Barnes, FPI Systems, North Haven, CT |
| The Future of Vapor Degreasing with Chlorinated Solvents , - 1993, Thomas Czesky, Hahn & Kolb (USA) Inc., Chandler, AZ |
| Influence on Chromium Compounds of Various Valences on the Microorganism's Growth , - 1993, Prof. V.N. Kudryavtsev, N.B. Gradova and E.G. Vinokurov, Mendeleyev University of Chemical Technology of Russia, Moscow,Russia |
| Y-Al Surface Co-Deposition and Surface Metalliding in Fluoride Molten Salts , - 1993, Shuzhen Duan and L. Zhao, University of Science and Technology, Beijing, Beijing, China |
| Amorphous Plated Film--Fabrication, Properties and Applications , - 1993, Dr. Tohru Watanabe, Tokyo Metropolitan University, Tokyo, Japan |
| Metallization of Ceramics by Electroless Plating, - 1993, Dr. Henry H. Law, AT&T Bell Laboratories, Inc., Murray Hill, NJ |
| Fabrication of Diamond Films and Their Applications , - 1993, Dr. Nobuo Setaka, National Institute for Research in Inorganic Materials, Ibaraki, Japan |
| Preparation of Superconductor for Coating by the Electrophoretic Deposition Method , - 1993, Dr. Nobuyuki Koura, Science University of Tokyo, Chiba, Japan |
| Dry Processes for Decorative Applications , - 1993, Dr. Takeo Oki, Nagoya University, Nagoya, Japan |
| Technology Art: New Applications of Surface Finishing Technologies to Industrial Art Objects , - 1993, Koichi Kuroda, Kuroda Surface Engineering Laboratory, Kanagawa, Japan |
| Cosmetic Brush Plating, - 1993, Robert Brookshire, Brushtronics Engineering, Laurel, MD |
| Physical Properties and Performance Characteristics of an Electrophoretically Deposited Polyurethane Coating , - 1993, Paul Hancharik and Howard Smith, Atotech, Somerset, NJ |
| Improvements of Nickel Deposit Characteristics by Pulse Plating , - 1993, Peter Torben Tang, M.Sc., Dr. Peter Leisner and Dr. Per Moller, Centre for Advanced Electroplating (CAG), Lyngby, Denmark |
| Non-Cyanide Alkaline Copper Plating , - 1993, Diane F. Maule, CEF, Associated Plating Company, Santa Fe Springs, CA, and Bob Srinivasan, EPI Electrochemical Products, New Berlin, WI |
| Fine-Tuning the Bright Zinc/Nickel Alloy Process , - 1993, Dr. David Crotty, Allied Kelite Division (Witco Corp), New Hudson, MI |
| Quality Improvements For Electroplating of Non-Ferrous Metals , - 1993, George H. Smith, Atotech USA, Inc., Somerset, N.J. |
| Multiple Applications for Phosphonate Copper , - 1993, Jeff Szotek, Enthone-OMI, Inc., Warren, MI |
| Zinc Plating and Corrosion Protection Topcoat , - 1993, Eliane Jennier, Atotech, Val D'Oise, France |
| Recycling and Recovery of Cleaning Solutions , - 1993, Thomas J. M. Weaver, Prosys Corporation, Chelmsford, MA |
| The Search for Cadmium Plating Alternatives--A Cooperative Approach , - 1993, Steve Schachameyer, R. Bauer and T. Halmstad, Eaton Corporation, Milwaukee, WI, and J. Newman, Masterlock, Milwaukee, WI |
| The Use of Vacuum Distillation in the Treatment & Recycling of Plating Solutions , Dec - 1993, Mario Fabro, Drew Resource Corp., Berkeley, CA |
| LOD, LOQ, MDL and PQL--Acronyms for Detection Limit Methodologies: The Driving Force of the Next Generation of Regulations for the Surface Finishing Industry , - 1993, John S. Lindstedt, Artistic Plating Company, Inc., Milwaukee WI |
| Increasing Removal Efficiencies of Typical Heavy Metal Precipitate from Electroplating Wastewater, Using Adsorptive Exchange and Co-Precipitation Methodologies , - 1993, John S. Lindstedt and Wenzhong An, Artistic Plating Co., Inc., Milwaukee, WI |
| Pennsylvania Caterpillar Plant Recovers Hard Chrome , - 1993, Bob Jeanmenne, Caterpillar, Inc., York, PA, and Stephen Perrone, Aqualogic, Inc., North Haven, CT |
| 100% Effluent Recycling in a German Zinc Plating Facility , - 1993, Dr. Bernhard Czeska, Galvatek GmbH, Freiburg, Germany |
| Solderability and Wirebonding Characteristics of Palladium, Palladium-Nickel, Soft-Gold Electrodeposits , - 1993, Igor Kadija, Dr. Joseph A. Abys, Edward J. Kudrak and Joseph J. Maisano, CEF, AT&T Bell Laboratories, Murray Hill, NJ |
| Porosity of Electroplated Palladium, Palladium-Nickel and Cobalt Hard Gold as a Function of Substrate Roughness and Deposit Thickness , - 1993, Edward J. Kudrak, Dr. Joseph A. Abys and F. Humiec, AT&T Bell Laboratories, Murray Hill, NJ |
| Electrodeposition of Hard Gold Coatings with Pulsed and Pulsed Reverse Current , - 1993, Zuzhan Yu, Qiwei Chen and Weijia Zhang, Fudan University, Shanghai, P.R. China |
| Chemical Technology of Silver Electroplating , - 1993, Gary Wolf, RFE Industries, Inc., Keasbey, NJ |
| Current Process Control Methods for Electrolytic Plating Solutions , - 1993, S. Boezi and Michael P. Hurley, Enthone-OMI, Inc., New Haven, CT |
| Jet Vapor Deposition of Thin Films for Electronic Applications , - 1993, J.Z. Zhang, D.T. McAvoy, D.L. Johnson, J.W. Golz, Y. Di, J.J. Schmitt and B.L. Halpern, Jet Process Corporation, New Haven, CT |
| ISO 9000: A Total Quality Management System , - 1993, Dennis Omanoff, Synoptics Communications, Inc., San Jose, CA |
| Securing the Future: Profiting from Change , - 1993, Sanford Kahn, Kahn Financial Group, Long Beach, CA |
| Understanding and Controlling Electroplating , - 1993, David Kahn, AMP, Inc., Harrisburg, PA |
| Advanced Surface Finishing Technology for Electronic Applications , - 1993, Dr. Tetsuya Osaka, Waseda University, Tokyo, Japan |
| Anodic Oxide Films on Aluminum: Structure and New Applications , - 1993, Dr. Nobuyoshi Baba, Metropolitan University, Tokyo, Japan |
| Environmental Effects on Electronic Materials , - 1993, B.I. Rickett and Prof. J.H. Payer, Case Western Reserve Univ., Cleveland, OH |
| Performance Properties of Trivalent Chromium , - 1993, Dr. Donald L. Snyder, Atotech USA, Cleveland, OH |
| Effect of Agitation on Electrodeposition of Chromium from Chromium(III)-Based Electrolytes , - 1993, M. El-Sharif, S. Ma and C.U. Chisholm, School of Engineering, Glasgow Caledonian University, UK, and A. Watson, Dept. of Chemistry, Paisley, UK |
| Advances in Trivalent Chromium Plating , - 1993, Nabil Zaki, Frederick Gumm Chemical Company, Inc., Kearny, NJ |
| Characteristics of Thermal-Hardened Electrodeposited Chromium , - 1993, Gar B. Hoflund and Charles K. Mount, University of Florida, Gainesville, FL, and Shigeo Hoshino and Shinishi Nakada, Musashi Institute of Technology, Tokyo, Japan |
| Prevention of Growth of Microorganisms in Drag-Out Systems for Gold Plating , - 1993, Harry van der Heyden, Meco Equipment Engineers, Netherlands, and Pieter Meuldijk, Meco International B.V., the Netherlands |
| The Feasibility for Eliminating Tin-Lead Plating Of Electronic Components , - 1993, James P. Langan, J.P. Langan & Associates, Inc., Red Bank, NJ |
| Laser Doppler Velocimetry Test of an Aqueous Degreasing Tank , - 1993, Troy D. Daiber, Jerry J. Anderson, C. Dean DeJong and Scott J. Hilton, Boeing Commercial Airplane Group, Seattle, WA |
| Thermometric Analysis: A Versatile Tool for Quality Control in Electroplating , - 1993, Philip Sadtler and Traude Sadtler, SANDA Corp., Philadelphia, PApp |
| Hydrodynamically Controlled Hull Cell Design Method Refinement, Part II I. , - 1993, V. Kadija, Dr. J. A. Abys and J.J. Maisano, AT&T Bell Laboratories, Murray Hill, NJ |
| Electrochemical Treatment of Electronics Manufacturing Wastewater , - 1993, Gary A. Peck and Michael D. Brewster, Andco Environmental Processes, Inc., Amherst, NY |
| Atmospheric Releases of Formaldehyde from Electroless Copper Plating Operations , - 1993, Roger L. Wayson, Prof.John D. Dietz, C. David Cooper, Douglas Bauman, P.J. Sutch, Kathleen Cheze, University of Central Florida, Orlando, FL |
| Reducing Chromium Air Emissions Without Going Broke , - 1993, Carol Huston, Iowa Waste Reduction Center, University of Northern Iowa, Cedar Falls, IA |
| Zero Discharge Plating by Cold Vaporization, - 1993, Stephen A. Donnelly, CALFRAN International, Inc., Springfield, MA |
| How Low Can You Go? , - 1993, Thomas H. Martin, CEF, Delta Chemicals & Equipment, Inc., Indianapolis, IN |
| Environmental Liability Insurance: The Pollution Exclusion--Past and Present , - 1993, John S. Vishneski III, Keck, Mahin & Cate, Chicago, IL |
| Closed-Looping of Metal Finishing Wastewaters , - 1993, Stratton Tragellis, MEMTEK Corporation, Billerica, MA |
| Pollution Prevention with Electrons , - 1993, Dr. Daniel J. Vaughan, Ionsep Corporation, Inc., Rockland, DE |
| Surface Treatment of Steels for the Corrosion Protection of Automobiles , - 1993, Yasuhiko Miyoshi, Nippon Steel Corporation, Chiba, Japan |
| The Effect of Crystal Orientation on the Corrosion Behavior of Electrogalvanized Auto Body Panels , - 1993, Dr. James H. Lindsay, Jr., General Motors Research, Warren, MI, and C. Ramadeva Shastry, Bethlehem Steel Corporation, Bethlehem, PA |
| Water Conservation and Recycling System of an Electroplating Factory Complex in Tokyo--15 Years' Experience , - 1993, Dr. Mamoru Saito, High-Techno Co., Ltd., Tokyo, Japan |
| The Regulatory Climate in the USA , - 1993, Frank Altmayer, CEF, Scientific Control Laboratories, Inc., Chicago, IL |
| Plating Systems for Labor and Cost Savings (Including Computerization) , - 1993, Shigeo Hashimoto and Tetsuo Otaka, Central Research Laboratory, C. Uyemura Co. & Ltd., Osaka, Japan |
| Total Quality Management in the USA: Has It Failed? , - 1993, David J. Sugg, Worthington Steel, Malvern, Malvern, PA |
| An Electroformed Stencil for Fine-Pitch Surface Mount Technology , - 1993, Dr. Gary T. Marks and Dr. Jerry E. Sergent, AMTX, Inc., Canandaigua, NY |
| Transferring Relief Holograms Formed in Silver Halide Emulsions into Nickel Foils for Embossing , - 1993, Torsten Ahlhorn, Dr. Klaus Gnadig and Dr. Heinrich Kreye, Universitat Der Bundeswehr Hamburg, Federal Republic of Germany |
| Electroforming of High Purity Copper Waveguides for Cryogenic and High Temperature Applications , - 1993, Chris Steffani, CEF, Lawrence Livermore National Laboratory, Livermore, CA |
| Electroforming Directly Onto a Flexible Mold , - 1993, Doug Czor and Deborah Peacock, Red Desert Studios, Albuquerque, NM |
| Novel Plating Technique on Electrically Isolated Mesas with Non-Planar Surface , - 1993, Ching-Long (John) Jiang, Lytel Division, AMP Inc., Somerville, NJ |
| Selective Metallization for High Density Interconnect Substrate , - 1993, Dr. Charles Lin, Microelectronics and Computer Technology Corp., |
| Rate Monitor for Chemical Etching of Metal Films , - 1993, Dr. Henry H. Law, G. Robertson, M. D. Evans and A. Borges, AT&T Bell Laboratories, Inc., Murray Hill, NJ |
| Optimization of Corrosion Protection of MIM (Metal Injection Molded) Substrates with Electroless Nickel Rod , - 1993, L. McGrath, AT&T Microelectronics, Reading, PA, and Harvey S. Trop, AT&T Bell Laboratories, Breinigsville, PA |
| Permanganate Desmear Process Control , - 1993, Vincent H. Kuo and Steve Durdle, Naval Air Warfare Center, Indianapolis, IN |
| Electrochemical Treatment of Metal Plating Wastes (AESF Project 79) , - 1993, Richard Suzuki, Weihong Li, Morton Schwartz, CEF, and K. Nobe, University of California, Los Angeles, CA |
| Electrodeposition of Iron, Nickel and Cobalt Alloys (AESF Summer Fellowship) , - 1993, Peter J. Partain, Maria B. Balmas, Morton Schwartz, CEF, and K. Nobe University of California, Los Angeles, CA |
| Machine Coolants, Electroplating Operations, and Chemical Material Management at Norfolk Naval Base, Jan - 1993, [no author] |
| Written Hazard Communication Programs, Apr - 1993, Vicki Sherwood |
| Book Review: Electroless Plating: Fundamentals and Applications, Edited by Glenn O. Mallory and Juan B. Hajdu, Jun - 1993, Dr. James H. Lindsay |
| Structure of Electroless Nickel Coatings, Jun - 1993, N.M. Martyak, S.Wetterer, L. Harrison, M. McNeil, R. Heu and A. Albert Neiderer |
| Metallization of Aluminum Nitride Substrates by Electroless Copper Plating, Jun - 1993, Bi-Shiou Chiou, J.H. Chang and Jenq-Gong Duh |
| Some Possible Roles of Cathodic Filming in the Electrodeposition of Alloys, Part II , Nov - 1993, Thomas C. Franklin, Venita Totten, Simon Jackson and Greg Jacobs |
| Assessment of Chromate and Non-Chromate Conversion Coatings for Al Alloys Using Electrochemical Impedance Spectroscopy, - 1993, Chang, F. and Levy, M. and Huie, R. |
| Evaluation of the Hughes Conversion Coating Touch-Up Pen, - 1993, Deitzel, John and Spadafora, Stephen J. |
| Test and Evaluation of a Pilot System for Ion Exchange Treatment of Cadmium Cyanide Wastes, - 1993, Bowen, Richard and O'Donnell, Joyce and Balasco, Armand |
| Electrochemical Impedance Spectroscopy of Trivalent Chromium Pre-Treated Aluminum Alloys, - 1993, Agarwala, Vinod S. and Beckert, Dieter W. |
| Eliminating Waste Discharge in a Reel-to-Reel Electroplating Shop, - 1993, Marino, Kenneth |
| Electroplating Wastewater: Pollution Control and Regeneration, - 1993, Raymond A. Guerrein |
| The 34th William Blum Lecture, Hydrogen in Electrodeposits: Of Decisive Importance, but Much Neglected, - 1993, Prof. Dr. Christoph J. Raub |
| The 35th William Blum Lecture, Electrodeposition of Alloys, - 1993, Dr. David S. Lashmore |
| Options for Minimizing Metal Finishing Waste, November - 1992, Walton, Clifford W. and Loos, Kevin J. |
| The Clean Air Act and Chromium Emissions, July - 1992, Altmayer, Frank |
| Recycling Metal Bearing Wastes Through Pyrometallurgical Technology, - 1992, Hanewald, R.H., et. al. |
| The Recovery of Used Acid Utilizing Diffusion Dialysis, - 1992, Reinhard, Fred P. |
| Finisher's Think Tank, Jan - 1992, Marty Borruso |
| Finisher's Think Tank, Jan - 1992, Marty Borruso |
| Finisher's Think Tank, Jan - 1992, Marty Borruso |
| Zero Discharge, Jan - 1992, Frank Altmayer |
| Electroless Nickel Conference, Jan - 1992, Mark Henry |
| Electroless Nickel Conference, Problem Solving Clinic, Jan - 1992, George Miller |
| Electroless Nickel Conference, Problem Solving Clinic, Jan - 1992, Brad Durkin |
| Electroless Nickel Conference, Problem Solving Clinic, Jan - 1992, Linda Wing |
| Electroless Nickel Conference, Problem Solving Clinic, Jan - 1992, John Kuczma |
| Electroless Nickel Conference, Problem Solving Clinic, Jan - 1992, Mike Aleksinas |
| Electroless Nickel Conference, Problem Solving Clinic, Jan - 1992, Dr. Roger W. Anderson |
| Finisher's Think Tank, Feb - 1992, Marty Borruso |
| Finisher's Think Tank, Feb - 1992, Marty Borruso |
| Finisher's Think Tank, Feb - 1992, Marty Borruso |
| Spill Prevention, Control & Countermeasure Plans, Part 1, Feb - 1992, Frank Altmayer |
| Finisher's Think Tank, Apr - 1992, Marty Borruso |
| Finisher's Think Tank, Apr - 1992, Marty Borruso |
| Preventing Surface Finishing Disaster, Part II, May - 1992, Frank Altmayer |
| Fine Lines, May - 1992, Mike McChesney |
| Fine Lines, May - 1992, Mike McChesney |
| Fine Lines, May - 1992, Mike McChesney |
| Finisher's Think Tank, May - 1992, Marty Borruso |
| Finisher's Think Tank, May - 1992, Marty Borruso |
| Physical Aspects of Alkaline Soak Cleaning, May - 1992, Marty Borruso |
| Practical Application of the Principles Governing the Iron Phosphate Process, Aug - 1992, Dick Phillips |
| Finisher's Think Tank, Jun - 1992, Marty Borruso |
| Finisher's Think Tank, Jun - 1992, Marty Borruso |
| Finisher's Think Tank, Jun - 1992, Marty Borruso |
| Finisher's Think Tank, Jun - 1992, Marty Borruso |
| Fine Lines, Jun - 1992, Mike McChesney |
| Fine Lines, Jun - 1992, Mike McChesney |
| Fine Lines, Jun - 1992, Mike McChesney |
| Real Time Conductor With Measurement, Jan - 1992, Robert Bible Jr. |
| Working with Diazo, Jan - 1992, Steve Thompson Steve Grossman |
| Preplanning the Drill Room, Jan - 1992, Jerry Hylander |
| CAE Quality Leadership, Jan - 1992, David Dibble |
| TQC Tools, Jan - 1992, Dale Reed |
| Environmental Issues, Jan - 1992, Mabbett, Capaccio & Associates Inc. |
| How PCB Fabricators Buy Laminate, Feb - 1992, Donna J. Esposito |
| Bonding Methods and Materials, Feb - 1992, Jack Frankosky |
| A Fresh Approach to Process Characterization, Feb - 1992, Mark Williamson Mike Moore |
| Clean Up Your Act, Feb - 1992, Robert J. Herberger |
| Analysis of Delamination Failures, Feb - 1992, Andrew M. Hirt |
| Top 10 Designer Sins , Feb - 1992, [no author] |
| TQC Tools, Feb - 1992, Dale Reed |
| Alkaline Etching of Planar Resistors, Mar - 1992, Phong X. Nguyen Michael Delgadillo |
| Copper Recovery from Alkaline Etchant, Mar - 1992, [no author] |
| HAL Specifications and Process Controls, Mar - 1992, Sherry Goodell |
| Plating with Tin and Tin-Lead Alloys, Mar - 1992, Jack Fellman |
| Score to Break, Mar - 1992, Robert A. Kelzer |
| TQC Tools, Mar - 1992, Dale Reed |
| Environmental Issues, Mar - 1992, Mabbett, Capaccio & Associates Inc. |
| A Comparison of Spray Etching Systems, Apr - 1992, Thomas Matthaes |
| Postprocessing: Multilayer Registration for the 1990s, Apr - 1992, Michael Angelo |
| Improved PCB Registration, Apr - 1992, Robert B. Conn Randy W. Cronk Pamela Lulkoski John P. Rehring |
| Using Silicone Rubber Press Pads, Apr - 1992, Chuck Roye |
| TQC Tools, Apr - 1992, Dale Reed |
| Safe Handling of Photopolymer Dry Films, May - 1992, Dr. John Lott |
| TQC Tools, May - 1992, Dale Reed |
| Environmental Compliance, Jun - 1992, Cynthia Retallick |
| Treating EDTA-Based Electroless Copper Rinsewater, Jun - 1992, J. Michael Hosea |
| Dry-Film Waste Treatment, Jun - 1992, Tat Choo John MacNeil |
| Ten Steps to Reduced Utility Costs, Jun - 1992, Elizabeth Clark |
| Electrochemical Technology for Waste Minimization, Jun - 1992, Roland J. Horvath |
| Condensed Desmear/Metallization Process, Jun - 1992, Dr. Francesco Tomaiuolo |
| PCB Rx, June - 1992, [no author] |
| TQC Tools, Jun - 1992, Peter Bartell |
| Environmental Issues, Jun - 1992, Mabbett, Capaccio & Associates Inc. |
| A Mathematical Model for Production Planning and Control, Jul - 1992, Geert Duprez |
| The Effect of Glass Cloth Styles on Laminate Tg, Jul - 1992, Kenneth R. Cox Scott Sutcliffe |
| TQC Tools, Jul - 1992, Ed Cosper |
| AOI Technology Terms, Aug - 1992, [no author] |
| PCB Rx, Aug - 1992, [no author] |
| TQC Tools, Sep - 1992, [no author] |
| Direct Metallization Technology, Part I, Oct - 1992, Dr. Hayao Nakahara |
| Fine-Line Processing: The Real World, Oct - 1992, Marshall I. Gurian |
| The Optimum Resist Thickness, Oct - 1992, G. Sidney Cox Richard Olson |
| Coating Thickness Measurement Techniques: Making the Choice, Oct - 1992, Jack Montgomery |
| Putting Quality Tools to Good Use, Oct - 1992, Christos Chrisafides Sammy Shina |
| Slot Drilling: Eliminating the Trade-Offs, Oct - 1992, Robert T. Schaefer Ray Ellett |
| Environmental Issues, Oct - 1992, Mabbett, Capaccio & Associates Inc. |
| TQC Tools, Oct - 1992, Gray McQuarrie |
| PCB Rx, Oct - 1992, [no author] |
| A Solder Ball Study, Part I, Nov - 1992, Theo Langer Torsten Reckert |
| Processing PTFE/Clad PCBs, Nov - 1992, Jack Frankosky |
| A Solder Ball Study, Part II, Dec - 1992, Theo Langer Torsten Reckert |
| The Phantom Plague?, Dec - 1992, Ralph Woodgate |
| Solder Mask and SMT Solderability, Dec - 1992, David R. McGregor Robert B. Hull Jr. Richard N. Petersen |
| Complete Control of Developer Carbonate, Dec - 1992, Lori L. McPherson |
| TQC Tools, Dec - 1992, Gray McQuarrie |
| The Replacement of Cadmium Plating, Acid or Alkaline Zinc-Nickel , - 1992, James A. Bates Pure Coatings Inc., West Palm Beach, FL 33407 |
| Achieving Competitive Edge Through the Application of Total Quality Management , - 1992, Dr. D. Paul Piplani, CEF, Acteron Corporation, Redwood City, CA |
| Practical Guide for Measuring HD Undercoat Thickness , - 1992, F. Matsui, T. Guiala, D. Liston, Uyemura International Corporation, Ontario, CA, Yasuyuki Yamamoto, C. Uyemura & Co., Ltd., Tokyo, Japan |
| Why Johnny Can't Do SPC , - 1992, David J. Sugg, Eastman Kodak Company, Dayton, OH |
| Statistical Process Control for Reel-to-Reel Plating: Thickness Control on Short Runs , - 1992, Dale Miller, P.E., C.Q.E., Consultant, Harrisburg, PA, and David J. Sugg, Eastman Kodak Company, Dayton, OH |
| TQM Implementation in a Plating Environment , - 1992, Paul Horgan, Quality Golden West, Yorba Linda, CA |
| A Microstructural Evaluation of Fe-Zn Couples by Cross-Section Transmission Electron Microscopy , - 1992, Lucille A. Giannuzzi, CEF, Paul R. Howell, Dr. Howard Pickering and Dr. William R. Bitler, Department of Materials Science & Engineering, The Pennsylvania State University, University Park, PA |
| Plating of Iron-Nickel Alloys in the Presence of Organic Additives , - 1992, Dr. B.N. Popov, Ken-Ming Yin, and Dr. R.E. White, Department of Chemical Engineering, Texas A&M University, College Station, TX |
| Electroformed, Single-Piece, Cassegrain Mirror Darell Engelhaupt, , - 1992, Chen Feng and John Cernosek, University of Alabama, Huntsville, AL |
| Compositionally Modulated Alloys , - 1992, Dr. D. S. Lashmore, Laboratory for Materials Science and Engineering, National Institute of Standards and Technology, Gaithersburg, MD |
| Electrochemical Array Sensors for Plating Waste Stream Monitoring , - 1992, Robert S. Glass and Keith C. Hong, John C. Estill, Robert A. Reibold, Wade M. Thompson, Dennis W. O'Brien, and Dino Ciarlo,Lawrence Livermore National Laboratory, Livermore, CA and Victoria E. Granstaff, Sandia National Laboratory, Albuquerque, NM |
| Electrodeposition Modeling of Nickel-Iron Alloys in the Presence of Organic Additives , - 1992, Ken-Ming Yin, B.N. Popov, and R.E. White, Center for Electrochemical Engineering, Department of Chemical Engineering, Texas A&M University, College Station, TX |
| Micro Finish Hard-Anodized Coatings on Aluminum , - 1992, Chris Steffani, CEF, Lawrence Livermore National Laboratories, Livermore, CA |
| The Hot-Cold Impregnation of Anodized Aluminum Influences the Impurities on the Porous-Layer Barrier of the Sealing Bath , - 1992, Xavier Albert Ventura, Barcelona, Spain |
| Mechanical Properties of Anodized Aluminum Coatings , - 1992, Robert S. Alwitt, Boundary Technologies, Inc., Buffalo Grove, IL and R. Craig McClung, Southwest Research Institute, San Antonio, TX |
| Recycling Chemicals on the Anodizing Line - Cost Savings and Quality Improvements , - 1992, Kevin Munns, P. Eng., Eco-Tec Inc., Ontario, Canada |
| An Introduction to Physical Vapor Deposition (PVD) Process , - 1992, D.M. Mattox, Society of Vacuum Coaters, Albuquerque, NM |
| An Electroplater's View of PVD Processing , - 1992, J.W. Dini, Lawrence Livermore National Laboratories, Livermore, CA |
| Production Techniques for Large-Area PVD Coatings , - 1992, D.L. Chambers, DC Industries, Columbus, OH |
| High Volume Automotive-Type Aluminum Coating by Ion Vapor Deposition , - 1992, Graham Legge, Abar Ipsen Industries, Bensalem, PA |
| TiN Coatings for Wear Resistance and Gold-like Decorative Coatings , - 1992, M.E. Graham and P. Chang, Basic Industry Research Laboratory, Northwestern University, Evanston, IL |
| Decorative and Wear-Resistant Coatings by PVD Processing , - 1992, D. Butrymowicz and J.R. Snyder, Leybold Technologies, Enfield, CT |
| Ion Vapor Deposition of Aluminum , - 1992, Brian T. Nevill, Embee Incorporated, Santa Ana, CA |
| Industrial Finishing--The Year 2000 , - 1992, Michael A. Pfaff, President, Metal Finishing Suppliers Association, USA (business affiliation: MacDermid, Inc., Waterbury, CT) |
| Surface Finishing in 2000: A European View , - 1992, Dr. David R. Gabe, Honorable Secretary General of the International Union for Surface Finishing (business affiliation: Institute of Polymer Technology & Materials Engineering, Loughborough University of Technology, Loughborough, Leicestershire, UK) |
| Future Trends in the Electroplating Industry in the Asia/Pacific Region , - 1992, Tadao Hayashi, University of Osaka Prefecture, Osaka, Japan |
| The Manufacturing Vision for the 21st Century , - 1992, Charles Kimzey, Chief, Manufacturing Programs Div., Office of the Assistant Secretary of Defense, Washington, DC |
| Finishing for Space Applications , - 1992, Mitch Mendrek, Materials & Structures, Marshall Space Flight Center, Alabama |
| Opportunities for Industry Collaboration with Governmental Laboratories , - 1992, John Hnatio, Director, Technology Management Group, Department of Energy Defense Programs, Washington, DC |
| The Role of the AESF in the Year 2000 and Beyond , - 1992, Richard O. Watson, CEF, AESF First Vice President, Benchmark Chemical Corp., Indianapolis, IN) |
| Surface Technology in the Service of Society , - 1992, M. Schlesinger, Dept. of Physics, University of Windsor, Canada |
| Trends in Precious Metal Plating Within the Connector Industry , - 1992, Ken Fleck, Fleck International, Huntington Beach, CA |
| Microhardness Testing of Plated Coatings: Defining Precision and Bias for ASTM B578 , - 1992, Jack Horner, Allied-Kelite Division, Witco, New Hudson, MI |
| The Relationship Between Vickers Hardness and Universal Hardness , - 1992, Prof. Dr.-Ing. W. Weiler, Physikalisch-Technischen Bundesanstalt, Braunschweig, Germany |
| Solderability Characteristics of Palladium, Palladium-Nickel, Hard and Soft Gold Electrodeposits , - 1992, I. Kadija, J.A. Abys, E.J. Kudrak, J.J. Maisano, AT&T Bell Laboratories, Murray Hill, NJ |
| Magnetic Properties and Structure of Cobalt-Hardened Gold , - 1992, Dr. David Kahn, AMP, Inc., Harrisburg, PA |
| Scanning Tunneling Microscopy Studies of Electrochemical Deposition , - 1992, Michael P. Green and Karrie J. Hanson, AT&T Bell Laboratories, Murray Hill, NJ |
| Insurance Coverage for Environmental Liability , - 1992, John S. Vishneski III, Keck, Mahin & Cate, Chicago, IL |
| Environmental Issues Associated with Financing of an Electroplating Facility , - 1992, Roger A. Dhonau and Sec Donohue, Pace Incorporated, Warrendale, PA |
| Pollution Prevention Planning for Electroplaters , - 1992, Daniel P. Reinke, PE, Capsule Environmental Engineering, Inc., St. Paul, MN |
| Assessment and Options for Waste Minimization in the Metal Finishing Industry , - 1992, Dr. Clifford W. Walton, CEF, and Kevin J. Loos, University of Nebraska-Lincoln, Department of Chemical Engineering, Lincoln, NE |
| Application of Microcomputers as a Technical Resource for Identification of Pollution Prevention Opportunities in Metal Finishing/Electroplating Operations , - 1992, Lisa Wilk, P.E. and Robert Capaccio, P.E., CChE, DEE, Mabbett, Capaccio & Associates, Inc., Bedford, MA |
| What Are Our Cleaning Options? , - 1992, L.M. Thompson, R.F. Simandl, H.L. Richards, A.L. Glover, Martin Marietta, Oak Ridge, TN |
| Impingement: The Key to Effective Aqueous Cleaning , - 1992, Michael J. Rowney, Stephen D. Temple and David L. Grimes, Ransohoff Corporation, Hamilton, OH |
| Membrane Filtration , - 1992, Tom Weaver, Prosys Corporation, Chelmsford, MA |
| Recycling and Recovery of Cleaning Solutions , - 1992, Tom Weaver, Prosys Corporation, Chelmsford, MA |
| Cleaning--Emerging Technologies , - 1992, Bob Srinivasan, EPI Electrochemical Products Inc., New Berlin, WI |
| Waste Minimization Via Source Reduction for the Plater Pt (III). Source Reduction Initiatives: The Prerequisite to Closed-Loop Dr. , - 1992, D. Paul Piplani, CEF, Acteron Corporation, Redwood City, CA |
| Electrochemical Processing for the Minimization of Waste in the Electroplating Industry--A Critical Review , - 1992, Prof. Dr. Andreas Moebius, Langhein-Pfanhauser Werke AG, Neuss, Germany |
| Evaluating the Economics and Effectiveness of Source Reduction Options in Metal Finishing , - 1992, Matthew L. McCullough, P.E., McLaren/Hart, Irvine, CA |
| Silver Recovery with Ion Exchange and Electrowinning , - 1992, John Lindstedt, Artistic Plating Company, Inc., Milwaukee, WI and Mike Doyle, P.E., Triad Engineering, Inc., Milwaukee, WI |
| Pollution Prevention with Advanced Technologies: A Success Story With a Payback , - 1992, Michael G. Green, Bio-Recovery Systems, Inc., Las Cruces, NM |
| Growth Morphology and Melting Characteristics of Electrodeposited Au-Sn Eutectic Alloys , - 1992, G. Holmbom, M. Svensson, Centre of Industrial Microelectronics and Materials Technology, Linkoping University, Linkoping, Sweden and J.A. Abys, H.K. Straschil, AT&T Bell Laboratories, Murray Hill, NJ |
| New Autocatalytic Gold Bath and Diffusion Barrier Coatings , - 1992, Charles D. Iacovangelo, Advanced Inorganic Materials Laboratory, GE Corporate Research and Development, Schenectady, NY |
| Bumping Process on Integrated Circuits by Electroless Plating , - 1992, Charles W. Lin, Ian Yee, and Brad Nelson, Microelectronic Computer Technology Corporation (MCC), Austin, TX |
| Laser-Induced Gold Deposit on InP Substrates , - 1992, Wang Xuhong, Yu Zuzhan and Zhao Guoqing, Fudan University, Shanghai, People's Republic of China |
| High Performance Gold Plating for Microdevices , - 1992, Dr. A. Gemmler, Dr. W. Keller, Fraunhofer Institute of Manufacturing and Automation (IPA), Stuttgart, Germany, Dr. H. Richter, and K. Ruess, SEL-Alcatel Research Center, Stuttgart, Germany |
| Electrochemical Deposition of Sn/Zn Alloys , - 1992, Jean Rasmussen, Danfoss A/S, Nordborg, Denmark |
| Electrodeposition of Ni-Fe Alloys from Sulfate, Sulfate-Chloride and Chloride Baths , - 1992, N. Furukawa, M. Hanabusa and T. Hayashi, Department of Applied Chemistry, University of Osaka Prefecture, Osaka, Japan |
| Optimization of the Alkaline Zinc-Iron Alloy Plating Bath Composition for Optimum Corrosion Results Using Taguchi D.O.E. Methodology , - 1992, B. Dafonte, Jr. and Naomi Holmes, Quin-Tec, Inc., Warren, MI and Sally Escota, Rampart Industries, Detroit, MI |
| Electrochemical Deposition of Zinc-Nickel Alloys in the Presence of Organic Additives , - 1992, Dr. B.N. Popov, Ken-Ming Yin, O. Velev and Dr. R.E. White, Department of Chemical Engineering, Texas A&M University, College Station, TX |
| Internal Stress Control of Electroformed Nickel-Iron Alloys , - 1992, Dr. H.M. Wu and H.J. Shy, Chung Shan Institute of Science & Technology, Taiwan, Republic of China, and Prof. Chein-Ho Huang, Chemistry Department, Soochow University, Taiwan, Republic of China |
| Development of High-Speed Black Electroplating Process , - 1992, Katsushi Saito, Nippon Steel Corporation, Chiba Kimitsu, Japan |
| The Journey Toward the Next Millennium: The Surface Finishing Industry in the 90s and Beyond , - 1992, Ed Barlow, Jr., Creating the Future, Inc., St. Joseph, MI |
| Contact Reliability vs. Plating Process Control , - 1992, Abner D. Joseph, CEF, and Steve J. Klaren, AT&T Bell Laboratories, Indianapolis, IN |
| The Interactive Effects of Solution Agitation, Current Density and Thickness on the Porosity of Various Precious Metal Electrodeposits , - 1992, E.J. Kudrak, CEF, and J.A. Abys, AT&T Bell Laboratories, Murray Hill, NJ |
| Improvement of Properties of Acid Copper Plating Baths for Printed Circuit Boards , - 1992, Shigeru Yamato, Chunen Kan and Akemi Ohharada, Okuno Chemical Industries Company, Ltd., Osaka, Japan |
| Selective Plating Equipment for Tape-Automated Bonding Film (TAB Film) , - 1992, P. W. Meuldijk, Meco International B.V., 's-Hertogenbosch, Netherlands and P. Johnson, Meco Equipment USA Inc., Rock Hill, SC |
| A Rotating Cylinder Throwing-Power Electrode , - 1992, J. J. Maisano, J.A. Abys, and I. V. Kadija, AT&T Bell Laboratories, Murray Hill, NJ |
| Plating Bath Analysis and Control by CVS--A Reality Rita Gluzman, , - 1992, Dr. Peter Bratin, Leon Fass, Dr. Jack Rickly and Dr. John Rie, ECI Technology, East Rutherford, NJ |
| Learn to Live with TDS Limits , - 1992, Lyle Kirman, Kinetico Engineered Systems, Inc., Newbury, OH |
| Chasing the Elusive Cyanide Ions , - 1992, Thomas H. Martin, CEF, Delta Chemical & Equipment, Indianapolis, IN |
| A Comparison of Filtration Techniques to Meet Tight Effluent Discharge Limits , - 1992, Stanley R. Karrs and Joan L. McConahy, Lancy Environmental Systems, Inc., Warrendale, PA |
| Atmospheric Releases of Hexavalent Chromium from Hard Chromium Plating Operations , - 1992, Mitch Hall, John D. Dietz, Roger L. Wayson, C. David Cooper, and Doug Bauman, University of Central Florida, Department of Civil and Environmental Engineering, Orlando, FL |
| Variable Slot Fumehood Designs and Problem-Solving of Air Emissions Using Elimination Technology , - 1992, Freeman Newton, PROLITE Plastics, Ltd., Port Moody, British Columbia |
| Optimizing EN Pretreatment Processes by Taguchi Statistical Methods , - 1992, Hong Deng and Per Moller, Centre of Advanced Electroplating, Technical University of Denmark, Lyngby, Denmark |
| Effects of Pretreatment on the Structure and Properties of EN Coatings , - 1992, Hong Deng, Per Moller, Centre of Advanced Electroplating, Technical University of Denmark, Lyngby, Denmark |
| Fundamentals of Electroless Polyalloy Deposition: I. Ni-M-B Alloys , - 1992, Glenn Mallory, Electroless Technologies Corporation, Los Angeles, CA |
| Electroless Gold Plating with Use of (External) Solid Nickel Catalysts , - 1992, N.V. Mandich, CEF, HBM Electrochemical and Engineering Co., Lansing, IL |
| Separation of Metals from Spent Electroless Plating Baths , - 1992, Wayne Henkels and Frank M. Jahnke, COGNIS Inc., Santa Rosa, CA |
| Macrosolutions for Microproblems in Rigid Memory Disc Manufacturing , - 1992, A. Ruffini, Ph.D. and D. Liebman, Ph.D. |
| Cost-Saving Insurance Alternatives in Today's Business Environment , - 1992, Frank Speer, Frank Speer Company, Atlanta, GA; Ron Mock, Insured Benefit Plans, Atlanta, GA and Walker McCune, Atlanta Health Alliance, Atlanta, GA |
| The 1990 Clean Air Act Amendments: The Impact on the Metal Finishing Industry , - 1992, Robert Capaccio, P.E., CChE, DEE, Mabbett, Capaccio and Associates, Inc., Bedford, MA |
| Surface Finishing Environmental/OSHA Regulations Update , - 1992, William Sonntag, National Association of Metal Finishers, Washington, DC |
| Double Containment Piping Systems , - 1992, Richard W. Birch, Chemtrol Division, Nibco, Inc, Indianapolis, IN |
| Improvement on Filter Press Feed Pump , - 1992, Bob Warrender, Warrender, Ltd., Northbrook, IL |
| Automation of the Metal Precipitation Process at Challenger Electrical Using ORP Electrodes , - 1992, Kristine S. Siefert, CEF, Nalco Chemical Company, Naperville, IL and Steven C. Hegerle, Challenger Electrical Equipment Corporation, Jackson, MS |
| A Case Study for Zero Discharge , - 1992, Rolando H. Santos, P.E., CEF, SSA Environmental, Miami, FL |
| Radioactive and Hazardous Wastewater Treatment and Sludge Stabilization by Filtration , - 1992, H. Lee Martin, Dr. John B. Pickett, and Dr. Christine A. Langton, Westinghouse Savannah River Company, Aiken, SC |
| PLC and Rectifier Combine to Improve Process Quality, Consistency , - 1992, William J. Shaughnessy, Rapid Power Technologies, Inc., Brookfield, CT |
| Plating Under Reduced Pressure , - 1992, J.W. Dini, W.C. Cowden, CEF, and T.G. Beat, Lawrence Livermore National Laboratory, Livermore, CA and L.E. Ryan, W.B. Hewitt, TRW, Redondo Beach, CA |
| Electrodialysis of Effluents From Treatment of Metallic Surfaces , - 1992, Katsutoshi Asada and Takuo Kawahara, Asahi Glass Company, Ltd., Toyko, Japan, and Lisa Gerdes, Asahi Glass America, Inc., New York, NY |
| Recovery of Hexavalent Chromium From Plating Rinse Waters , - 1992, J.I. Bishara, J.R. Brannan and R.J. Horvath, ELTECH Research Corporation, Fairport Harbor, Ohio |
| Mass Production Electroforming of a Three-Dimensional Component , - 1992, C. Barnes and T. J. Crichton, The Gillette Company, UK Research and Development Laboratory, Reading, England |
| Metal Finishing by Autodeposition of Organic Coatings , - 1992, Thomas C. Jones, Oscar E. Roberto, and Robert G. Hart, Parker + Amchem Henkel Corporation, Madison Heights, MI |
| A Design of Experiments to Optimize Cleaning Using Semi-Aqueous Cleaning Solvents , - 1992, Suzanne Nachbor, Honeywell, Inc., Minneapolis, MN |
| Accelerated Implementation of a Wave Soldering System , - 1992, Gordy Seppanen, Honeywell, Inc., Minneapolis, MN |
| Solderability Requirements of Surface Mount Technology , - 1992, James P. Langan, J.P. Langan & Associates, Inc., Red Bank, NJ |
| Electroless Nickel Plating of Printed Wiring Boards for Solderability and Wire Bonding , - 1992, Dr. David E. Crotty and Joseph Greene, Allied Kelite, Division of Witco Corporation, New Hudson, MI, and Tonya Jackson, Lexmark International, Inc., Lexington, KY |
| Throwing Power in Pulse Reverse Plating from an Acid Copper Bath , - 1992, Peter Leisner, G. Bech-Nielsen, and Dr. Per Moller, Centre of Advanced Electroplating, Lyngby, Denmark |
| Advancements in Copper/Solder Plating at Hughes, - 1992, Tucson Paul W. Fecsik, CEF, and Bruce T. Miller, Hughes Aircraft Company, Tucson, AZ |
| Quality Assurance Through Nondestructive Screening of Barrel Plating , - 1992, James H. Brim, FeinFocus, USA, Inc., Norcross, GA |
| The Cost of Total Quality Management , - 1992, Roger Sowinski, Alchem Corporation, Medina, OH |
| Reducing Wastewater Treatment Costs and Liability , - 1992, William Cimbrelo, M. E. Baker Co., Cambridge, MA |
| Auditing Commercial TSDF , - 1992, William R. McTigue, Jr., Envirite Corporation, Plymouth Meeting, PA |
| Filtration--A Focal Point for Cost Reduction , - 1992, Stuart M. Raifman and Alfred Corvello, MEFIAG Filtration, Stoughton, MA |
| Hazardous Waste Minimization Efforts at the Air Force Logistics Centers Repair Depot Plating Shops , - 1992, Glen Graham and Mike Patry, Tinker Air Force Base, Oklahoma City, OK |
| Vapor Degreasing Alternatives in Metal Cleaning Applications: Evaluation of Aqueous Degreasers , - 1992, Dr. Johnny L. Golden, Boeing Defense and Space Group, Seattle, WA |
| The Importance of Water-Based Cleaners in a Cleaning Operation , - 1992, John Zavodjancik, CEF, Pratt & Whitney Aircraft, East Hartford, CT |
| Corrosion Control Performance Evaluation of Environmentally Acceptable Alternatives for Cadmium Plating , - 1992, Mark Ingle and James Ault, Ocean City Research Corporation, Arlington, VA |
| Boeing's Evaluation of a Replacement for Chromium Plating: Ni-W-SiC Composite Electroplating , - 1992, Daniel V. Schiffelbein, P.E., CEF, Boeing Defense & Space Group, Seattle, WA |
| Alternatives for Tank Chromium Using Selective (Brush) Plating , - 1992, John Langan, SIFCO Selective Plating Division of SIFCO Industries, Inc., Cleveland, OH |
| Electroless Nickel as a Replacement for Hard Chromium--The Phosphorus Content Makes the Difference , - 1992, Brad Durkin, David Crotty, Allied-Kelite, A Witco Company, New Hudson, MI |
| The National Defense Center for Environmental Excellence (NDCEE) , - 1992, Dr. Dale A. Denny, NDEC, Johnstown, PA |
| Barrel Chromium Plating from a Trivalent Chromium Electrolyte , - 1992, George E. Shahin, CEF, M&T Harshaw, Somerset, NJ |
| Continuous Carbon Filtration of Nickel Plating Baths , - 1992, Steven Erwin, Benchmark Chemical Corporation, Indianapolis, IN |
| Statistical Study of the Chromating of Electrodeposited Zinc , - 1992, Dan Ulrich and Karin Alnor Jensen, NKT Wire Works and Centre of Advanced Electroplating, Middelfart, Denmark |
| Statistical Investigation of the Layer Thickness Distribution from an Alkaline Zinc-Iron Electrolyte , - 1992, Karin A. Jensen and Dan Ulrich, NKT Wire Works and the Centre of Advanced Electroplating, Middelfart, Denmark |
| Selective Brush Plating for Decorative Applications , - 1992, Jeff Hurrell, Brooktronics Engineering Corporation, North Hollywood, CA |
| Spontaneous Hydrogen Generation in Bright Zinc Coating , - 1992, Prof. V. N. Kudryavtsev, Moscow Mendeleev Institute of Chemical Technology, Moscow, Russia |
| Characterization of Zn-Ni Alloys Through the Use of EDXRF Analysis , - 1992, Ryan Nelson, ESC, Seiko Instruments U.S.A. Inc., Torrance, CA |
| Non-Destructive Coating Thickness Measurement of Corrosion Protective Coatings , - 1992, Peter Neumaier, Fischer Technology, Inc. Windsor, CT |
| Energy Dispersive XRF Spectrometers for the Elemental Analysis of Plating Bath Solutions , - 1992, Philip Almquist, ASOMA Instruments, Austin, TX |
| Economics of Trivalent Chromium , - 1992, Plating Nabil Zaki, Frederick Gumm Chemical Co., Kearny, NJ Second AESF |
| Plating of Heat-Treatable Hard Chromium , - 1992, Dr. John Dash, Portland State University, Portland, OR, and J. DeHaven, Omark Industries, Portland, OR |
| The Effects of Pulse Plating on Low-Contraction Chromium Electrodeposits , Jul - 1992, Mark Miller and S.K. Pan |
| Electrodeposition of Tin-Based Alloys as Functional Coatings , Jul - 1992, V.N. Kudryavtsev, K.M. Tyutina, A.N. Popov, S.A. Maksimenko and V.A. Zonin |
| Applying Taguchi Statistics to Optimize Current Efficiency in Hard Chromium Pulse Plating , Jul - 1992, P. Leisner, D. Ulrich and P. Moller |
| A Study of Effects of Agitation on Conventional Electroless Plating in Preparation for an Investigation of Composite Plating , Aug - 1992, M.R. Kalantary, K.A. Holbrook and P.B. Wells |
| Prototype Manufacture of Miniature Nickel-Iron Alloy Magnetic Sleeves for Optical Switching , Aug - 1992, H.H. Law, C.A. Holden, C.A. Mattoe, J. Sapjeta, Y. Degani and T.H. Tiefel |
| Pulsed Electrodeposition of Copper , Aug - 1992, G. Devaraj and S.K. Seshadri |
| The Effect of Organic Additives on a CuO Electroless Copper Bath , Aug - 1992, Haewei H. Wan, Shin-Horng Yeh, Jhy-Yeong Gau and Ching-Yu Hu |
| Investigations into Gaseous Testing Requirements for Pd-Ni Alloy Coatings of Electrical Contacts , Sep - 1992, James L. Chao and Randy R. Gore |
| Determination of the Mixed Potential on Synthetic Electroless Copper Baths , Sep - 1992, Nicholas M. Martyak and Bruce McDuffie |
| Auto-Measuring Technique and Application for Stress in Metal Electrodeposits , Sep - 1992, Jiazhu Li and Liangyu Zeng |
| Effects of Surfactants on Cyclic Voltammetric Stripping Analysis of Acid Copper Sulfate Plating Baths , Sep - 1992, H.M. Wu, M.L. Lay and C.H. Huang |
| Modifying a PC to Diagnose "Sick" Paint Robots , Oct - 1992, Bryan Stewart |
| Aluminum Coloring Using Robust Design , Oct - 1992, Ten-Chin Wen and Shih-Min Lin |
| Tensile Strength of Plated Glass Optical Fibers , Oct - 1992, Gerard Orcel |
| The Application of Electroplating for Prevention of Hydrogen Embrittlement in AISI 4140 Steel , Oct - 1992, Jin-Ming Chen and Jiann-Kuo Wu |
| Why Johnny Can't Do SPC , Sep - 1992, David J. Sugg |
| Flame Ionization Detector Response Factors for Paint Solvents: Measuring Emissions of Volatile Organic Compounds , Oct - 1992, Leigh Ann Kuhn, Burns & McDonnell, Kansas City, MO. |
| Continuous Carbon Filtration of Nickel Plating Baths , Oct - 1992, Steven W. Erwin, Benchmark Chemical Corp., Indianapolis, IN. |
| Electrodeposition of Bright Tin from Neutral Gluconate Baths , Oct - 1992, T. Sonoda, H. Nawafune and S. Mizumoto |
| Electroless Deposition of Ni-Cu-P Alloys , Nov - 1992, M. Cherkaoui, A. Srhiri and E. Chassaing |
| A Study of the Stability of Ni-Cr-P Plating Solutions , Nov - 1992, B.N. Popov, W. Li and R.E. White |
| Interlaboratory Evaluation of a Simple, Thin-Film Ductility Tester and Review of the Ductility of Nickel Sulfamate Deposits , Nov - 1992, George A. DiBari |
| Options for Minimizing Metal Finishing Waste , Nov - 1992, Clifford W. Walton and Kevin J. Loos |
| Atmospheric Releases of Hexavalent Chromium from Hard Chromium Plating Operations , Nov - 1992, Mitchell S. Hall, John D. Dietz, C. David Cooper, Roger L. Wayson and Doug Bauman |
| Chasing Those Elusive Cyanide Ions , Nov - 1992, Thomas H. Martin, CEF |
| Chemistry of Modern Permanganate Etchback Systems for Printed Circuit Board Production , - 1992, N.V. Mandich, CEF, and G.A Krulik, CEF |
| Ultrasonic Agitation Effects on the Electrodeposition of Copper from a Cupric- EDTA Bath , - 1992, A. Chiba and W.C. Wu |
| The Relationship Between Vickers Hardness and Universal Hardness , - 1992, W. Weiler |
| Characteristics of a Non-Cyanide Alkaline Zinc Plating Bath , - 1992, R.M. Krishnan, S.R. Natarajan, V.S. Muralidharan and G. Singh |
| Wastewater Recycling in a European Manufacturing Company , - 1992, Mario Fabro |
| Structure and Corrosion Resistance of Electroless Ni-Cu-P , Mar - 1992, YanWen Wang, ChangGeng Xiao and ZhongGang Deng |
| The Structure and Hardness Of Electroless Nickel-Molybdenum-Phosphorus Deposits , Feb - 1992, Sheng-Long Lee and Han-Hsi Liang |
| Gran's Plot Standard Addition Method for Determination of Ammonia in Electroless Copper Plating Solutions , Feb - 1992, Nicholas M. Martyak |
| Porosity of Composite Palladium, Palladium-Nickel and Gold Electrodeposits , Feb - 1992, E.J. Kudrak, J.A. Abys, V. Chinchankar and J.J. Maisano |
| Electroless Nickel Plating Cycle Design for Thin Film Memory Disks , Feb - 1992, D. Crotty, B. Clark, J. Greene and B. Durkin |
| The Morphology and Optical Characteristics of Black Solar Selective Coatings , Jan - 1992, F.J. Monteiro, F. Oliveira, R. Reis and O. Paiva |
| Interfacial Bonding Between Electroless Copper Deposits And Sulfonic-Acid-Modified Polystyrene, Jan - 1992, Charles E. Baumgartner |
| Electrochemical Studies of TiN-Coated Stainless Steel, Jan - 1992, Y.L. Chen |
| Cathode Reaction of Brightening Agent Vanillin in Alkaline Zinc Electroplating , Jan - 1992, Fengchun Huang, Shao-xian Pan and Yonglin Liang |
| Evaluation of Some Engineering Properties of an Enamel-Coated Steel , Apr - 1992, Mohini Saxena, B.K. Prasad and T.K. Dan |
| Three Dimensions of Waste Minimization & Project Integration , Apr - 1992, Kevin P. Vidmar, Stanley Fastening Systems, East Greenwich, RI |
| Effective Removal of Organics from Nickel Wastewater by Modified Carbon Adsorption , Apr - 1992, Chein-Ho Huang |
| Effect of Saccharin Addition on the Physico-Chemical Characteristics of Deposits from Electrolytic Nickel-Phosphorus Baths , Apr - 1992, J.P. Bonino, P. Pouderoux, C. Rossignol and A. Rousset |
| Electrodeposition of Ni-Cr-P Alloys in the Presence of Additives , Apr - 1992, R. Bindlish, B.N. Popov and R.E. White |
| Perspective on Plating for Precision Finishing , May - 1992, J.W. Dini |
| Electrogalvanized Automotive Sheet Steel and the Manufacturing System , May - 1992, James H. Lindsay |
| Manufacturer Relies on Surface Finishing to Tap the Worldwide Soft Drink Market A Plating and Sur. Fin. Report, May - 1992, [no author] |
| Automated Parts Handling for a Wet-Processing Facility , May - 1992, John Patram |
| Regulatory Pressures on Chlorinated Solvents: How Can Users Cope , - 1992, Azita Yazdani, Pollution Prevention International, Los Angeles, CA |
| Decorative Plater Eliminates Vapor Degreasing , - 1992, Dennis G. Willis, Capsule Environmental Engineering, Inc., St. Paul, MN 13th |
| Pratt & Whitney's Vapor Degreaser Replacement Program , - 1992, John Zavodjancik, CEF, Pratt & Whitney Aircraft, East Hartford, CT 13th |
| Pollution Prevention: Developing Trends in Connecticut , - 1992, James W. DeWitt, Connecticut Resource Group, Inc., Hartford, CT 13th |
| Waste Minimization in a Non-Production-Oriented Metal Finishing Facility , - 1992, Jack Dini and C.P. Steffani, CEF, Lawrence Livermore National Laboratory, Livermore, CA 13th |
| Integration of Waste Minimization , - 1992, Kevin Vidmar, Stanley Fastening Systems, East Greenwich, RI 13th |
| Wastewater Treatment Methods in the Metal Finishing Industry and the Recycling Factor , - 1992, Steven W. Koop, World Resources Co., Pottsville, PA 13th |
| Recycling Metal-Bearing Wastes via a Pyrometallurgical Process , - 1992, Mark E. Schweers and J.C. Onuska, Inmetco, Ellwood City, PA 13th |
| Detection level Limitations for Hexavalent Chromium , - 1992, Steve Schachameyer, Eaton Corp., Milwaukee, WI; John Lindstedt, Artistic Plating, Inc., Milwaukee, WI; and John Maliszewski, Reliable Plating, Inc., Milwaukee, WI 13th |
| Development of Multi-Phase Wastewater/Groundwater Discharge Permit , - 1992, Karen McDermott and Suzanne Riley, Environmental Risk Limited, Bloomfield, CT 13th |
| Environmental Audit Methodologies: Developing and Maintaining a Comprehensive Management Compliance Program , - 1992, Daniel S. Travis and William N. Hansard, Summit Environmental Group, Inc., Nashville, TN 13th |
| Responsible Container Management in the '90s , - 1992, Michael P. D'Angelo, CEF, MacDermid, Inc., Waterbury, CT; Joseph Malgeri, Ehtone-OMI, Warren, MI; and Dennis Masarik, M&T Harshaw, Beachwood, OH 13th |
| Application of Environmental Risk Assessment Concepts to the Surface Finishing Industry , - 1992, Lance S. Traves, Clayton Environmental Consultants, Inc., Novi, MI 13th |
| The Permit Quandary: What Do You Do When You Find You have Been Operating Without a Necessary Permit? , - 1992, Beth Gotthelf--Seyburn, Khan, Finn, Bess Howard & Harnisch, P.C., Southfield, MI and Dr. Rebecca M. Spearot, Clayton Environmental Consultants, Novi, MI 13th |
| An Alternative to Cyanide Copper , - 1992, Thomas W. Bleeks, CEF, and Tamara S. Davidson--Enthone-OMI, Inc., West Haven, CT 13th |
| Heavy Metals Removal with Microfiltration Technology , - 1992, Dr. Ernest Mayer--E.I. duPont de Nemours, Inc., Engineering Dept., Newark, DE 13th |
| Two Emerging Techniques for On-Line & In-Situ Monitoring of Metals in Electroplating Wastes , - 1992, Bernard J. Beemster, Kenneth J. Schlager, Carl A. Bergstrom and Kathryn M. Schloegel--Biotronics Technologies, Inc., Waukesha, WI 13th |
| Use of a Granular Magnesium-Based Adsorbent for Plating Metal Removal and Acid Neutralization , - 1992, Richard Van DeWalle, Mark T. Wajer, David M. Smith and Mathew D. Walter-- Martin marietta Magnesium Specialties, Baltimore, MD 13th |
| Closed-Loop Rinse Recovery, Using Advanced Reverse Osmosis, Following Copper Cyanide Plating , - 1992, Thomas von Kuster and Joel Malmberg--Water Technologies, Inc., Edina, MN 13th |
| Considerations on the Use of Dithiocarbamates for the Removal of Metals from Water , - 1992, Peter S. Zisson and Dr. Thomas E. McNeel--Buckman Laboratories International, Inc., Memphis, TN 13th |
| Practical Overview of Brush Plating , - 1992, Garry Byrne--Dalcan Services Ltd., Burlington, Ontario, Canada |
| Brush Plating Alloys and Sulfamate Nickel Alloys , - 1992, Beldon Hutchinson--Liquid Development Co., Cleveland, OH |
| Brush Plating: The Process & Application for Improved Brazability of Inconel , - 1992, Jeff Hurrell--Brooktronics Engineering, North Hollywood, CA |
| Brush (Selective) Chromic Acid Anodizing & Applications in the Aerospace Industry , - 1992, Joseph Norris--SIFCO Selective Plating, Cleveland, OH |
| Hardcoating of Aluminum , - 1992, Richard Going, CEF--ROG Enterprises, Ashland, MA |
| Engine Processing Facility Design , - 1992, Woody Allen, Mike Roark, Lucio D'Alessandro and Dominic Dilazzaro--Burns & McDonnell, Kansas City, MO |
| Fluoride Ion Gas Phase Cleaning and Stripping of HP Turbine Components , - 1992, Al Clavel--Ti-Coating Systems, Inc., Clemens, MI |
| Aluminide Coating of HP Turbine Components , - 1992, Dorothy M. Comassar--General Electric Aircraft Engines, Cincinnati, OH |
| Rejuvenation of Electroless Nickel Baths without Loss of Plating Reagents or Generation of Hazardous Wastes, - 1992, Dr. Roger Anderson and W.A. Neff--Martin Marietta Energy Systems, Oak Ridge, TN |
| Aerospace Coating Removal Process Considerations , - 1992, Steven Anzelc - Haden Management Corp., Madison Heights, MI |
| Plasma Coating Removal via High-Pressure Water Stripping at Northwest Airlines' Atlanta Maintenance Base , - 1992, Richard Keene--Northwest Airlines, Atlanta, GA |
| Hazardous Waste Minimization Efforts at Tinker AFB, Oklahoma , - 1992, Glen Graham and Michael Patry--Tinker AFB, OK |
| Replacement for Silver, Chromium and Cadmium in High-Temperature Applications for Engine Fasteners , - 1992, Dr. Robert Gresham--E/M corp., West Lafayette, IN |
| Substitution of Cadmium, Using Zinc Alloy Plating Processes , - 1992, Edward Budman--Dipsol-Gumm Ventures, Kearny, NJ |
| Replacement for Cyanide Cadmium , - 1992, Mirza Baig--Aldoa Co., Detroit, MI |
| A Chromium-Free Aluminum Pretreatment System, - 1992, Dr. John Bibber--Sanchem Inc., Chicago, IL |
| Waste Minimization at Ryder System's Aircraft Engine Overhaul & Repair Facility in Dallas , - 1992, Chris Murthy, Ryder System Co., General Aviation Services Div., Aircraft Engine Overhaul & Repair Facility, Dallas, TX |
| Polarization Effects and What to Do About Them , - 1992, Dr. Ken Newby--M&T Harshaw, Somerville, NJ |
| Sources of Nodules & Pits in Hard Chromium Electrodeposits , - 1992, Dr. Allen R. Jones--M&T Harshaw, Somerset, NJ |
| Thin, Dense Hard Chromium , - 1992, Myron Browning, CEF--Rocketdyne, West Hills, CA |
| Conventional vs. Reversible Bus Bar Systems , - 1992, George Gilliland and Arnold Bowen--Chrome Engineering & Consulting Service, Inc., Mason, MI; and Paul Vadeboncoeur, Rail Bearing Service Company, Knoxville, TN |
| Electrodeposition of Trivalent Chromium , - 1992, Dr. David Lashmore, E.C. Soltani and C.E. Johnson--National Institute of Standards and Technology, Gaithersburg, MD |
| Zero Discharge of Chromic Acid Waste: A Closed Loop System , - 1992, Paul Vadeboncoeur--Rail Bearing Service Co., Knoxville, TN |
| Purification of Chromium Plating Solutions , - 1992, Ned Mandich, CEF, HBM Electrochemical & Engineering Co., Lansing, IL |
| Scrubber Designs for Hard Chrome Plating , - 1992, Bill Schott--Kimre, Inc., Perrine, FL |
| Corrosion Protection Through Salt Bath Nitriding , - 1992, James Easterday, P.E.--Kolene Corp., Detroit, MI AESF |
| Chromium Plating of Valve Stem Wear Applications , - 1992, [no author] |
| Alternatives to Hard Chromium Plating in the USSR , - 1992, Prof. Dr. Thomaz Agladz--Electrochemistry Dept., Georgia Polytechnical Institute, Tbilisi, Republic of Georgia, USSR |
| Toward Automatic Control of Nickel Plating Processes , Mar - 1992, J.W. Becker, T. Bolch, A. Gemmler and P. Jandik |
| Chemical Characterization of Autocatalytic Ni-Mo-P Alloys Oscar Mendoza, , Mar - 1992, Ralph E. White, David L. Cocke and Ben A. Horrell |
| The Effect of Organic Additives on the Phase Composition of Electroless Nickel-Phosphorus Films , Mar - 1992, Udo Hofmann and Konrad G. Weil |
| Structure and Corrosion Resistance of Electroless Ni-Cu-P , Dec - 1992, YanWen Wang, ChangGeng Xiao and ZhongGang Deng |
| Direct Deposition of Patterned Copper Films on PTFE , Jun - 1992, T.T. Kodas, M.J. Hampden-Smith and R.R. Rye |
| A Contribution Toward Understanding the Phenomenon of Pink Ring , Jun - 1992, R.S. Sidhu, G.A. Krulik, CEF, and N.V. Mandich, CEF |
| Copper Electroplating on Carbon Fibers With HEDP + P2O74- Electrolyte , Jun - 1992, Yongxue Gan |
| Polarization and Galvanic Studies of Cobalt-Titania Cermets in Corrosive Environments, Jun - 1992, E.P. Rajiv and S.K. Seshadri |
| Plating the Magna Carta--an Historical Perspective , Jun - 1992, Bev Sewell |
| You Learn You're Operating without a Necessary Permit. What Do You Do? , Apr - 1992, Beth Gotthelf, Esq., and Rebecca Spearot, P.E. |
| An Updated Review of Good Plating Practices , Feb - 1992, Eugene P. Foeckler and James P. Melka |
| Finishers' Think Tank, Jul - 1992, Marty Borruso |
| Evaluation of Aluminum Ion Vapor Deposition as a Replacement for Cadmium Electroplating at Anniston Army Depot, - 1992, Ressl, R. and Spessard, J. |
| Wastewater Characterization Survey, Holloman Air Force Base, New Mexico, - 1992, Curtis, Darrin L |
| Diamond and Refractory Coatings of Gun Barrels for Electrothermal- Chemical Launchers, - 1992, Bourham, M. A. and Gilligan, J. G. and Hankins, O. E. and Hurley, J. D. and Eddy, W. H. and Bogdanoff, P. D. |
| In Situ Surface Studies Of Conversion Coatings For Steel And Aluminum, - 1992, White, Henry W. and Mansfeld, Florian and Bryant, Paul |
| Caterpillar, Pennsylvania Recovers Hard Chrome, - 1992, Jeanmenne, Bob and Perrone, Stephen |
| Environmental Research Brief - Waste Minimization Assessment for a Manufacturer of Sheet Metal Cabinets and Precision Metal Parts, - 1992, Looby, Gwen P. |
| An Analysis of Alternatives to Ozone-Depleting Solvents in Cleaning Applications, - 1992, Wolf, Katy |
| Troubleshooting Aluminum Anodizing, - 1992, Gregory R. Jessup |
| Electrochemical Technology in Electronics: Past Accomplishments and Future Challenges -- The 33 th William Blum Lecture, Jun - 1992, Dr. Lubomyr Romankiw |
| The 33rd William Blum Lecture,
Electrochemical Technology in Electronics: Past Accomplishments and Future Challenges, - 1992, Lubomyr Romankiw |
| Modeling Electroplating Rinse Systems Using Equation-Solving Software, November - 1991, Hillier, Andrew and Walton, Clifford W. |
| Safety in Surface Finishing, Part 111: Some Final Tips, Nov - 1991, Frank Altmayer |
| Finisher's Think Tank, Nov - 1991, Marty Borruso |
| Finisher's Think Tank, Nov - 1991, Marty Borruso |
| Finisher's Think Tank, Nov - 1991, Marty Borruso |
| Finisher's Think Tank, Nov - 1991, Marty Borruso |
| From The Mailbox: Fastener Questions, Dec - 1991, Frank Altmayer |
| From The Mailbox: Fastener Questions, Dec - 1991, Frank Altmayer |
| From The Mailbox: Fastener Questions, Dec - 1991, Frank Altmayer |
| From The Mailbox: Fastener Questions, Dec - 1991, Frank Altmayer |
| Finisher's Think Tank, Dec - 1991, Marty Borruso |
| Finisher's Think Tank, Dec - 1991, Marty Borruso |
| Innerlayer Registration and Laminate Dimensional Stability, Mar - 1991, David Iguchi |
| Electrostatic Production of Solvent-Free Prepreg, Mar - 1991, Denis R. McKay |
| Processing Copper-Molybdenum-Copper PCBs, Mar - 1991, Richard Nicholson Sandeep Jain |
| A Time to Bake, Mar - 1991, Frank Juskey |
| Additive Processing, Apr - 1991, Jerry Murray |
| A Study of Ammoniacal Palladium-Nickel Bath, Apr - 1991, Jonathan D. Reid Jerome J. Caricchio Jeffrey R. Kelby |
| Formulating Solder Strippers for PWBs, Apr - 1991, T.S. Krishna Ram |
| A Comparison of Copper Bar Anodes, Apr - 1991, Paul T. Forde |
| Investigation of Spray Oxides, Apr - 1991, Rudy Sedlack |
| The Permit-By-Rule Battle, Apr - 1991, Jerry Murray |
| Putting Conservation Strategies to Work, May - 1991, Eric Rogers Ted Molinari |
| Sludge Reduction Waste Treatment, May - 1991, Boyd A. Anderson |
| A Microwave Circuit Manufacturer's Waste Treatment Installation, May - 1991, Robert F. Lee Rodger McMonagle |
| The Impact of Carbamate on Heavy-Metal Reduction, May - 1991, James Martin |
| Waste Treatment Overview, May - 1991, Jerry Murray |
| The Artwork Area and the Environment, May - 1991, [no author] |
| Individual Liability Under Environmental Protection Status, May - 1991, Erik T. Salveson Gregory R. Merz |
| Air Flow Management in Cleanrooms, Jun - 1991, William J. Soules |
| Analysis of an Aqueous Photoresist, Jun - 1991, Robert E. Smith |
| High-Potential Failure Analysis, Jun - 1991, Luis F. Sotto |
| Environmental Issues, Jun - 1991, Mabbett, Capaccio & Associates Inc. |
| Individual Liability Under Environmental Protection Status, Jul - 1991, Erik Salveson Gregory Merz |
| Water and Moisture Absorption of Laminate, Jul - 1991, T.S. Hsu |
| Microetching Techniques, Aug - 1991, James A. Nelson |
| Making a Good First Impression, Sep - 1991, William L. Rogers |
| Electrostatic Application of Resist and Solder Mask, Sep - 1991, David Marks Tzoong-Cahyh Lee |
| Environmental Issues, Sep - 1991, Mabbett, Capaccio & Associates Inc. |
| Plate Forward Instead of Etch Back, Oct - 1991, Robert Spain, Ph.D. Boris Dubrowsky Ph.D. |
| The Mechanisms of Permanganate Desmear, Oct - 1991, C. Edwin Thorn Michael K. Walsh |
| Tin-Lead Fusing Problems, Oct - 1991, Thomas J. Burns |
| Minimizing Wet-Process Waste, Oct - 1991, Peter Moleux |
| Horizontal vs. Vertical Processing, Oct - 1991, Michael Meyers Brad Dirkman |
| Vertical Processing, Oct - 1991, Hubert Rosch |
| Environmental Issues, Oct - 1991, Mabbett, Capaccio & Associates Inc. |
| Coversheet-Free Exposure of Dry-Film Resist, Nov - 1991, G. Sidney Cox Gregory C. Weed |
| Actually Printing Printed Circuits, Dec - 1991, George Behrend |
| Controlling the Solder Coating/HAL process, Dec - 1991, Earl Moon |
| Making a Good First Impression, Dec - 1991, Jerry Murray |
| Using a Recruiter, Dec - 1991, Nelson S. Silverstein |
| Membranes for Waste Management and Recycling , - 1991, Dr. William W. Goudie and Dr. Americus C. Vitale, E.I. du Pont de Nemours & Co., Wilmington, DE |
| How to Successfully Obtain a Variance from EPA re Land Ban Regulations , - 1991, Jim Jacobs, Northwestern Plating, Chicago, IL |
| Waste Minimization in Decorative Chromium Plating James Abbott, , - 1991, Jim Abbott Plating, Philadelphia, PA, and Bruce W. Stevens, Hazardous Materials Management Team, Ltd., Newton, PA |
| Elimination of 1,1,1-Trichloroethane Through Critical Evaluation and Aqueous Cleaning , - 1991, Kevin P. Vidmar, Stanley-Bostitch, Inc., E. Greenwich, RI |
| Use of the Heat Pump Evaporator in Minimizing Wastes from Metal Finishing Wastewaters , - 1991, Dan Weaver, Toccoa Metal Finishing, Inc., Toccoa, GA, and Terence P. Driscoll, Waste Purification Systems, Inc., Atlanta, GA |
| Recycling Anodizing Rinsewater Using Ion Exchange , - 1991, Lyle Kirman and Jerome Kovach, Kinetico Engineered Systems, Inc., Newbury, OH |
| Electroless Nickel Bath Recovery by Cation Exchange and Precipitation , - 1991, R.W. Anderson and W.A. Neff, Oak Ridge Gaseous Diffusion Plant, Martin Marietta Energy Systems, Inc., Oak Ridge, TN |
| Environmental Concerns in Property Transfer and Refinancing for the Surface Finishing Industry , - 1991, Harriet L. Greenwood, Clayton Environmental Consultants, Novi, MI |
| Removal of Chelated Metals from Electroless Spent Baths and Rinsewaters Using a Novel Adsorbent , - 1991, Mark Weaver, Chemical Systems Division, Alcoa Laboratories, Alcoa Center, PA |
| Recovery of Chromium from Waste Streams , - 1991, Tom Lewis, III, Lewis Engineering Services, Verona, PA |
| Nondestructive Measurement of the Porosity of Electroless Nickel Plating over Aluminum Alloys--an Indicator of Corrosion Protection, - 1991, Donald D. Palmer, Collins Avionics and Communications Div., Cedar Rapids, IA |
| Factors Influencing Solderability of Electroless Ni-P Deposits , Jul - 1991, Jing Li Fang, Xiang Rong Ye and Jing Fang |
| Statistical Process Control: Assignable Causes and Data Forecasting , Feb - 1991, Thomas M. Tam and Paul R. Scherer |
| AESF RESEARCH PROJECT 68 Selective Pulse Plating of Gold and Tin-Lead Solder , Feb - 1991, D-T. Chin and M.K. Sunkara |
| High Performance Neutral Nickel-Phosphorus Plating Baths , Feb - 1991, C.A. Holden, H.H. Law and J. Sapjeta |
| Protective Action of Chromate Conversion Coatings , Jan - 1991, R. Sarmaitis and E. Juzeliunas |
| Bendable PCB Laminate: Properties, Fabrication and Applications , Jun - 1991, Donald Greene & Connie S. Jackson |
| Source Reduction of Chlorinated Solvents in the Electronics Industry , May - 1991, Azita Yazdani |
| Mechanism of the Codeposition of Titania Particles With Nickel from Fluoborate Baths G.N.K. , May - 1991, Ramesh Babu, V.S. Muralidharan and K.I. Vasu |
| Ni-Cr-P Plating Bath Characterization by Ion Chromatography , Sept - 1991, R.E. Faxel, Jr. and R.E. White |
| A Study of Rapid Direct Potentiometry to Measure Trivalent Chromium Content in a Chromic Anhydride Plating Bath , Jul - 1991, Huang Yongxia, Zhang Yizhen and Huang Dingqi |
| Easy Chemical Analysis of a Sulfuric Acid Aluminum Anodizing Bath , Jul - 1991, Toshihiko Sato and Kyoko Kaminaga |
| Deposition Rate of Electroless Copper Monitored by A Computer-Aided Coulostatic Method , Aug - 1991, Masao Matsuoka, Kazuya Iwamoto and Tadao Hayashi |
| Copper Foil Characterization and Cleanliness Testing , Jan - 1991, I. Artaki, M.H. Papalski and A.L. Moore |
| A New Method for Plating on Molybdenum , Jan - 1991, Sue Troup |
| A New Method to Fabricate Single Delta-phase Zn-Fe Coating , Jan - 1991, Mingyuan Gu and A.R. Marder |
| A New Duplex Plating Process for EMI Shielding , Feb - 1991, F. Matsui, T. Okada, T. Kawakubo and T. Otaka |
| Wear Reliability of Gold-Flashed Palladium vs. Hard Gold on a High-Speed Digital Connector System , Mar - 1991, E. J. Kudrak, J. A. Abys, I. Kadija and J. J. Maisano |
| Study of Pulsed Electrolytic Deposition of Aluminum onto Aluminum, Platinum and Iron Electrodes Georgia Manoli, , Mar - 1991, Yannis Chryssoulakis and Jean-Claude Poignet |
| Mechanism of Electrolytic Coloring of Anodized Aluminum , Mar - 1991, Toshihiko Sato |
| Zinc-Alloy Electrodeposits for Improved Corrosion Protection , Mar - 1991, Gary W. Loar, Klaus R. Romer and Yetuhiro J. Aoe |
| Heavy Metals Waste Minimization: Practice and Pitfalls , Apr - 1991, John Rosenblum and Mazen J. Naser |
| Recycling Anodizing Rinsewater Using Ion Exchange , Apr - 1991, Lyle Kirman and Jerome Kovach |
| The Use of Simple Material Balances to Solve Problems in a Circuit Board Manufacturer's Wastewater Treatment System , Apr - 1991, David A. Wood, P.E. |
| Recovering EDTA from Old Electroless Copper Solutions , Apr - 1991, J.E.A.M. van den Meerakker |
| Some Studies on the Distribution of Bright Gold Electrodeposits , Apr - 1991, Ronald J. Morrissey |
| Trivalent Chromium Electroplating for Baths Containing Hypophosphite Ions , May - 1991, Jin-Yih Hwang |
| Self-Induced Repair of Printed Circuit Boards , Jun - 1991, C.J. Chen, J.P. Partridge, B. Hussey and A. Gupta |
| Deposition of Dense and Hard Coatings by Ion-Assisted and Plasma-Assisted Vacuum Processes , Jun - 1991, Karl H. Guenther |
| Contact Materials for Electronic Connectors: A Survey of Current Practices & Technology Trends in the U.S.A. , Jun - 1991, Morton Antler |
| Electroless Tin Plating through Disproportionation , Jul - 1991, H. Koyano, M. Kato and M. Uchida |
| Non-Cyanide Zinc Plating and Reuse of Recovered Chemicals in Electroplating , - 1991, Paul M. Randall, U.S. EPA Pollution Prevention Research Branch, Cincinnati, OH, and Dr. Gary D. Miller, Hazardous Waste Research & Information Center (HWRIC), Champaign, IL. |
| Technical Assistance for Waste Minimization , - 1991, Brian A. Westfall, U.S. EPA Risk Reduction Engineering Lab (RREL), Cincinnati, OH, Dr. F. William Kirsch and Gwen P. Looby, University Science Center, Philadelphia, PA. |
| Toxicity Characteristics Leachate Procedure (TCLP): An Overview of the Effect on Waste Generators and Its Methodology , - 1991, Kerry Prescott, A.C. Laboratories, Inc., Miramar, FL. |
| Comprehensive Waste Reduction at a Captive Plating Shop , - 1991, Daniel P. Reinke, Capsule Environmental Engineering, Inc., St. Paul, MN |
| Heavy Metals Waste Minimization: Practice & Pitfalls , - 1991, Dr. John Rosenblum, Rosenblum Environmental Engineering, Sebastopol, CA, and Mazen Naser, Plating and Waste Consulting, Daly City, CA. |
| An Overview of Waste Minimization and Wastewater Recovery Practices at Pratt and Whitney , - 1991, Peter Gallerani, CEF, Integrated Technologies, Inc. Bethany, CT and Rick McCarvill, Pratt and Whitney, North Haven, CT |
| Implementation of a Waste Minimization Program at a Major Printed Circuit Board Manufacturer , - 1991, Solomon Roditi, Bull HN, Brighton, MA |
| Achieving Whole Effluent Toxicity Limits at a Plating Job Shop Through Waste Minimization and Treatment System Modifications , - 1991, Scott Backus, Har-Conn Chromium Co., W. Hartford, CT, and William Williams and Paul Schaffman, Consulting Environmental Engineers, Inc., W. Hartford, CT |
| ORP for Chemical Dosage Control in Metal Precipitation Treatment , - 1991, Kristine S. Siefert and Kerstin E. Lampert, Nalco Chemical Co., Naperville, IL |
| Tape Automated Bonding (TAB) in VLSI Packaging , - 1991, Earl D. Winters, AESF Technical Specialist, Quakertown, PA |
| Process Control of Electroplating Solutions by Predictive Model Control , - 1991, P. Birdsall, M. Hurley amd J. Lovie, Enthone-OMI, Inc., Nutley, NJ |
| Deposition of Hard Coatings by Ion-Assisted and Plasma-Assisted Vacuum Processes , - 1991, Karl H. Guenther, Center for Research in Electro Optics and Lasers (CREOL) and Dept. of Electrical Engineering, University of Central Florida, Orlando, FL |
| Etching of High-Tc Superconductor Materials by an Electrochemical Process , - 1991, K.B. Sundaram and S.S. Sesham, Dept. of Electrical Engineering, and Dr. Vimal Desai, Dept. of Mechanical and Aerospace Engineering, University of Central Florida, Orlando, FL |
| Electrochemical Measurements on Yttrium-Barium-Copper (YBC) High-Tc Superconductors , - 1991, Dr. Vimal Desai and Lisa Sperling, Dept. of Mechanical and Aerospace Engineering, University of Central Florida, Orlando, FL |
| Wear Properties of Chromium Films , - 1991, Austin Grogan, Dept. of Mechanical and Aerospace Engineering, University of Central Florida, Orlando, FL |
| Selective Pulse Plating: Current Distribution Studies AESF Research Project 68 , - 1991, Dr. Der-Tau Chin, N.R.K. Vilambi and M.K. Sunkara, Department of Chemical Engineering, Clarkson University, Potsdam, NY, and Dr. Eric W. Brooman, Battelle Columbus Laboratories, Columbus, OH |
| Design of Galvanostatic and Potentiostatic Waveforms for Pulse Plating Control with a Newly Developed System , - 1991, Tommy C. Dorge, Dr. Per Moller and Peter Leisner, Centre for Advanced Electroplating, The Technical University of Denmark |
| Electroplating of Layered Alloys with Dual Current Pulses Morio Matsunaga, , - 1991, Shinsuke Hamaguchi, Ablet Ablimit, Yutaka Tsuru and Kunisuke Hosokawa, Dept. of Applied Chemistry, Kyushu Institute of Technology, Japan |
| Application of the Taguchi Statistical Method to Pulse Plating of Hard Chromium, - 1991, Peter Leisner, D. Ulrich and Per Moller, Centre of Advanced Electroplating, Lyngby, Denmark |
| A Survey of Power Supply Technologies for Pulse Plating Applications , - 1991, Christopher C. Smith, Dynapower Corp., Farmington Hills, MI |
| Pulse Plating of Acid Gold for Electronic Contacts , - 1991, Ned Mandich, HBM Electrochemical & Engineering Corp., Lansing, IL |
| Theory of the Effect of Electrodeposition at a Periodically Changing Rate on the Quality of Metal Coatings , - 1991, K.I. Popov and M.D. Maksimovic, Faculty of Technology and Metallurgy, University of Beograd, Beograd, Yugoslavia |
| Prevention of Spongy Zinc Formation by Electrodeposition from Alkaline Zincate Solutions at a Periodically Changing Rate , - 1991, K.I. Popov and N.V. Krstajic, Faculty of Technology and Metallurgy, University of Beograd, Beograd, Yugoslavia; and M.G. Pavlovic, Institute of Electrochemistry ICTM, University of Beograd, Beograd, Yugoslavia |
| Cementation of Copper from Acidic Sulfate Electrolytes on Nickel-Plated steel , Dec - 1991, B.N. Popov, R.E. White and J.V.Ivshin |
| Mechanical and Chemical Properties of Periodic-Reverse Plated Ni-P Amorphous Alloys, Dec - 1991, Robert L. Zeller III and Uziel Landau |
| Electroless Deposition of Gold Using Benzyl Alcohol as Reducing Agent , Aug - 1991, Gajanan M. Ganu |
| Electrodeposition of Dispersion-Strengthened Alloys , Aug - 1991, Glenn A. Malone |
| The Effect of Pre-Etch Solvent Treatment On Electroless Plating of Polycarbonate , Nov - 1991, Prasit Sricharoenchaikit |
| Modeling Electroplating Rinse Systems Using Equation-Solving Software , Nov - 1991, Andrew C. Hillier and Clifford W. Walton, CEF |
| A Quick, Simple Method for the Determination of Gold Concentration In Electroplating Solutions by High Performance Liquid Chromatography , Nov - 1991, Michael Powers, Fred Hoppe and Joel Gannotti |
| Using Taguchi Techniques To Analyze Dendrite Formation in an Acid Copper System , Nov - 1991, Haewei H. Wan and John E. McCaskie |
| The Lu Cell--A Hull Cell with a Rotating Cathode , Oct - 1991, Po-Yen Lu |
| Determination of Low Levels of Ammonia in an Electroless Copper Plating Bath Using Reactive Ion Exchange (RIEX) , Oct - 1991, Nicholas M. Martyak and Bruce McDuffie |
| Characteristics of Nickel-Flyash Electrocomposite Coatings , Oct - 1991, C.S. Ramesh, S.K. Seshadri and K.J.L. Iyer |
| A Comparison of Cadmium Electroplate and Some Alternatives , Oct - 1991, C.H. Ko, C.C. Chang, L.C. Chen and T.S. Lee |
| The Effect of Additives on the Internal Stress of Nickel Deposits from Watts Baths , Sep - 1991, Shih-Min Lin and Ten-Chin Wen |
| Structures and Corrosion Characteristics of Electroless Nickel-Molybdenum- Phosphorus Deposits , Sep - 1991, Sheng-Long Lee and Han-Hsi Liang |
| ASTM Committee B-8 to Mark Golden Anniversary , Aug - 1991, James K. Long |
| Sealing Tests and the Aging of Cold-Sealed Anodized Aluminum , Jul - 1991, M.R. Kalantary, D.R. Gabe and D.H. Ross |
| From Art to Technology--Developments in Electroplating in Japan , - 1991, Dr. Tadao Hayashi, University of Osaka Prefecture, Osaka, Japan |
| Stress in the Zinc Deposit Vijay Kansupada, , - 1991, Richard Painter and Jayshree Dalal |
| Electrogalvanized Automotive Sheet Steel and the Manufacturing System , - 1991, Dr. James H. Lindsay |
| Statistical Investigation of Barrel Plating of Zinc from a Cyanide Electrolyte , - 1991, Dr. Dan Ulrich, CEF-SE |
| Zinc Cobalt: A Cost-Effective, High Performance Alloy Coating to Meet Future Corrosion Requirements , - 1991, Thomas E. Sharples |
| Zinc Manganese Alloy Electrodeposition , - 1991, A. Jamani, G.D. Wilcox, D.R. Gabe and B.P. Pearson |
| Non-Cyanide Gold and Silver Plating: Answers to an Ecologist's Prayer , - 1991, Alfred M. Weisberg |
| NiP Electrodeposition on RDE and Jet-Cell: Electrochemistry and Amorphous-Crystalline Transition , - 1991, J.R. Roos, J.P. Celis and E. Bredael |
| Explanation of the Various Mechanisms of Altering Alloy Plating Solutions to Achieve Different Effects , - 1991, Marty Borruso |
| Effect of Tartrate on Electrodeposition of Ni-Fe Alloy S.S. , - 1991, Djokic, N.V. Mandich, CEF |
| The Effect of Pulsed Current on the Mechanical Properties of Acid Copper PCB Electrodeposits , - 1991, M.R. Kalantary, D.R. Gabe and M.R. Goodenough |
| The Impact of Surface Finishing on Modern Technology , - 1991, Dr. Aviezer Israeli, president of the Metal Finishing Society of Israel |
| Impressions of Surface Finishing in the USSR , - 1991, Steven Schachameyer |
| Environmental Regulations and Solutions in Surface Finishing Technology in the USSR , - 1991, Prof. Dr. V.N. Kudryavtsev and V.A. Kolesnikov |
| Plastic Pipe for Compressed Air Transfer , - 1991, Dick Birch |
| The Systems Approach to Lubricating and Maintaining Finishing Line Materials Transfer Equipment and Reducing Product Contamination , - 1991, Dale P. Brautigam |
| Computerized Control System for Six-Sigma Electronics Plating Process , - 1991, Marcel Arseneault, Jean Audet and Natalie Pere |
| Productivity Advantages Adherent to Computer-Controlled DC Drive Hoists , - 1991, John Tress and Andy Kolbus |
| Computerized Finishing , - 1991, Joseph Saad |
| An Enhanced LCD Imaging System for the PCB Industry , - 1991, Prem Sunder Urali J. |
| Electroformed X-Ray Optics , - 1991, M.P. Ulmer, R. Haidle and R. Altkorn |
| Thickness Distribution in Nickel Electroformed Ink Jet Aperture Plates-Modeling and Experiments , - 1991, G. Marks, D. Blessington and U. Landau |
| Modern Electroforming in Europe , - 1991, S.A. Watson, CEF |
| Interlaboratory Evaluation of a Simple Ductility Tester and a Review of the Ductility of Nickel Sulfamate Deposits , - 1991, Dr. George DiBari |
| Electroforming Thin-Channel Heat Exchangers , - 1991, Chris Steffani, CEF |
| Use of Statistical Process Control in Copper Electroforming Operations at Hughes Aircraft Company , - 1991, Paul W. Fecsik, CEF, and Bruce T. Miller |
| Contact Resistance of Oriented Electroplated Nickel , - 1991, Thomas F. Davis and Dr. David Kahn |
| Acid Palladium Strike for Improved Adhesion and Porosity , - 1991, H.K. Straschil, J.A. Abys, J.J. Maisano and E.J. Kudrak, CEF |
| The Growth Behavior and Properties of DC and PC Gold Deposits , - 1991, Kwang-Lung Lin and Wu-Chien Liu |
| Eutectic AuSn Alloy Plating, - 1991, J.A. Abys, E.J. Laskowski, H.K. Straschil, E.J. Kudrak, CEF, and W.V. Werner |
| Contact Resistance of Gold and Palladium-Nickel Contact After Heat Treatment , - 1991, Kinya Horibe and Tomio Hirano |
| Toxic Loans--Lender Liability Issues Affecting Surface Finishers , - 1991, Dr. Edwin Tifft, Jr. |
| National Economic Update , - 1991, Jeff Thredgold, KEYCORP, Salt Lake City, UT |
| Surface Finishing Environmental Law/OSHA Law Update , - 1991, William Sonntag, NAMF, Washington, DC |
| Electroformed Copper Shaped-Charge Liners , - 1991, Dr. Michael J. Sole, CEF and Thomas Szendrei |
| The New Clean Air Act: An Environmental Milestone, Jan - 1991, William K. Reilly |
| Fact Sheet: Waste Reduction Techniques: An Overview, Jan - 1991, [no author] |
| Tests of Iron-Oxide-Coated Sand For Treatment of Plating Rinsewaters, Feb - 1991, Mark M. Benjamin, Szufan Chang and Robert Bailey |
| Waste Minimization and Pollution Prevention At Pratt & Whitney Aircraft, Mar - 1991, By Peter Gallerani, CEF, and Rick McCarvill |
| Designing a Solvent Recovery System, Part II, Feb - 1991, Mabbett, Capaccio & Associates Inc. |
| A Checklist for Productivity and Control, Feb - 1991, James H. Reynolds |
| Small-Hole Technology: It Takes More Than a Drilling Machine, Feb - 1991, Jerry Murray |
| An Overview of Small-Hole Processing By M.J. Harris, Feb - 1991, M.J. Harris |
| Electroless Catalyst Bath Optimization, Dec - 1991, N. V. Mandich, CEF |
| A Look at the Buying, Jan - 1991, John |
| Weak Knees, Jan - 1991, Ralph |
| Scanning for Electronic Data, Jan - 1991, Ken Rockette |
| Advice and Council: Obtaining a Variance From the EPA, Apr - 1991, Frank Altmayer |
| Finishers' Think Tank, Apr - 1991, Ronald Kornosky |
| Finishers' Think Tank, Feb - 1991, Marty Borruso |
| Finishers' Think Tank, Jan - 1991, Marty Borruso |
| Finishers' Think Tank, Jun - 1991, Marty Borruso |
| Advice and Council: The Clean Air Act Amendments And Their Impact On Metal Finishers, Jul - 1991, Frank Altmayer |
| Finishers' Think Tank, Jul - 1991, Marty Borruso |
| A Look at the PCB Equipment Buying Process, Feb - 1991, John T. Fisher |
| Microsectioning: A Compensation Formula, Feb - 1991, Richard E. Olsen |
| Health and Safety Plan Soil Vapor Extraction Treatability Investigation Site S within Operable Unit D, McClellan Air Force Base, - 1991, CH2M HILL SACRAMENTO CA |
| Waste Minimization in Decorative Chromium Plating Baths, - 1991, Abbott, James and Stevens, Bruce W. |
| Chemical and Water Use Reduction at Poly-Plating Inc., - 1991, MA Office of Technical Assistance |
| HAZMIN R&D at U.S. Army Toxic and Hazardous Materials Agency (USATHAMA), - 1991, Eichholtz, Richard L. |
| From Art to Technology:
Developments in Electroplating in Japan -- The 32 th William Blum Lecture, Jun - 1991, Dr. Tadao Hayashi |
| The 32nd William Blum Lecture, From Art to Technology: Developments in Electroplating in Japan, - 1991, Dr. Tadao Hayashi |
| B&B, Feb - 1990, W.H. Safraneck |
| Waste Minimization Part II, Feb - 1990, Frank Altmayer |
| Finisher's Think Tank, Feb - 1990, [no author] |
| Finisher's Think Tank, Feb - 1990, [no author] |
| Finisher's Think Tank, Feb - 1990, [no author] |
| Finisher's Think Tank, Feb - 1990, [no author] |
| Finisher's Think Tank, Feb - 1990, [no author] |
| Finisher's Think Tank, Feb - 1990, [no author] |
| Ti and Al Racking for Anodizing and Hardcoat Part 2, Feb - 1990, Peter Kraft |
| Contamination Prevention: Both Sides, Mar - 1990, Frank Altmayer |
| Finisher's Think Tank, Mar - 1990, [no author] |
| Finisher's Think Tank, Mar - 1990, [no author] |
| Finisher's Think Tank, Mar - 1990, [no author] |
| Finisher's Think Tank, Mar - 1990, [no author] |
| Finisher's Think Tank, Mar - 1990, [no author] |
| The Neglect of Substrate Preparation Steps, Mar - 1990, W.H. Safraneck |
| Aluminum Cathodes: An Alternative for Sulfuric Anodizing, Mar - 1990, Fred Henschel |
| Variables in the Anodizing Process, Apr - 1990, Peter Kraft |
| Finisher's Think Tank, Apr - 1990, [no author] |
| Finisher's Think Tank, Apr - 1990, [no author] |
| Finisher's Think Tank, Apr - 1990, [no author] |
| Finisher's Think Tank, Apr - 1990, [no author] |
| Finisher's Think Tank, Apr - 1990, [no author] |
| Finisher's Think Tank, Apr - 1990, [no author] |
| Finisher's Think Tank, May - 1990, [no author] |
| Finisher's Think Tank, May - 1990, [no author] |
| Finisher's Think Tank, May - 1990, [no author] |
| Finisher's Think Tank, May - 1990, [no author] |
| Finisher's Think Tank, May - 1990, [no author] |
| Finisher's Think Tank, May - 1990, [no author] |
| Finisher's Think Tank, May - 1990, [no author] |
| The Knock on the Door, May - 1990, Frank Altmayer |
| Finisher's Think Tank, Jul - 1990, [no author] |
| Finisher's Think Tank, Jul - 1990, [no author] |
| Finisher's Think Tank, Jul - 1990, [no author] |
| Finisher's Think Tank, Jul - 1990, [no author] |
| Finisher's Think Tank, Jul - 1990, [no author] |
| Waste Minimization Part II, Jul - 1990, Frank Altmayer |
| TCLP and EP Toxicity, Sep - 1990, Frank Altmayer |
| Finisher's Think Tank, Sep - 1990, Marty Borruso |
| Finisher's Think Tank, Sep - 1990, Marty Borruso |
| Finisher's Think Tank, Nov - 1990, Marty Borruso |
| Finisher's Think Tank, Nov - 1990, Marty Borruso |
| Finisher's Think Tank, Nov - 1990, Marty Borruso |
| Finisher's Think Tank, Nov - 1990, Marty Borruso |
| Color It Blue, Nov - 1990, W.H. Safraneck |
| Confined Spaces, Dec - 1990, Frank Altmayer |
| Finisher's Think Tank, Dec - 1990, Marty Borruso |
| Finisher's Think Tank, Dec - 1990, Marty Borruso |
| Finisher's Think Tank, Dec - 1990, Marty Borruso |
| Finisher's Think Tank, Dec - 1990, Marty Borruso |
| Finisher's Think Tank, Dec - 1990, Marty Borruso |
| Third Third Blues Part 11: Cyanide Update, Oct - 1990, Frank Altmayer |
| The Functions of Electroplated Chromium, Oct - 1990, W.H. Safraneck |
| Finisher's Think Tank, Oct - 1990, Ronald Kornosky |
| Finisher's Think Tank, Oct - 1990, Ronald Kornosky |
| Finisher's Think Tank, Oct - 1990, Ronald Kornosky |
| Finisher's Think Tank, Oct - 1990, Ronald Kornosky |
| Finisher's Think Tank, Oct - 1990, Ronald Kornosky |
| Finisher's Think Tank, Oct - 1990, Ronald Kornosky |
| Anodizing of Aluminum by Micro-Explosive Air Agitation , Dec - 1990, Hiroyuki Satoh |
| Trivalent Chromium: 15 Years of Production Experience , - 1990, Dr. Donald Snyder, Engelhard R&D Center, Beachwood, OH |
| Physical Properties of High-Speed Electrodeposited Chromium , - 1990, Dr. Kenneth Newby, M&T Chemicals Inc., Somerville, NJ |
| Improving Quality and Turnaround Time by Evaluating Hard Chromium Plating Rejects , - 1990, C. Greg Piner, CEF, Navair Engineering Support Office, Naval Air Rework Facility, Marine Corps Air Station, Cherry Point, NC |
| Existing Practices in the Purification of Chromium Plating Solutions , - 1990, Rolando R.H. Santos,P.E., CEF, Cleveland Pneumatic-PSD, Miami, FL |
| Factors Influencing Cracking of Chromium Deposits and Subsequent Part Performance , - 1990, David J. Sugg and Daniel Brockman, Techmetals, Inc., Dayton, OH |
| Advances in Electrolytic Power Supplies for Chrome Plating , - 1990, William E. Feil and Christopher C. Smith, Dynapower Corporation, Farmington Hills, MI |
| Chemical Process Control of Chromium Plating Solutions , - 1990, David Sugg, Techmetals, Inc., Dayton, OH |
| Analysis of Chromium Plating Solutions and Wastewaters by Ion Chromatography , - 1990, Shawn Heberling, Dan Campbell and Steve Carson, Dionex Corporation, Sunnyvale, CA |
| Chromic Acid Production , - 1990, Dr. R.J. Barnhart, American Chrome and Chemicals Inc., Corpus Christi, TX |
| The Toxicology of Chromium and Its Compounds , - 1990, Dr. Daniel McCoy, Blodgett Regional Poison Center, Grand Rapids, MI |
| California's Regulation of Hexavalent Chromium and Its Impact on the Plating Industry , - 1990, Larry Foss, Foss Plating Company, Inc., Santa Fe Springs, CA |
| Using Fume Suppressants in Hard Chromium Plating , - 1990, Dr. Allen Jones, CEF, M&T Chemicals, Somerville, NJ |
| Determination and Handling of Hexavalent Chromium Mists , - 1990, Art Brooks, KCH Services, Inc., Forest City, NC |
| A Critical Review of Chromium Plating Waste Treatment and Recovery Methods , - 1990, Dr. Clifford Walton, P.E., CEF, and Sanjay Wale, Department of Chemical Engineering, University of Nebraska, Lincoln, NE |
| Chromic Acid Purification By Ion Exchange , - 1990, Michael Dejak, Eco-Tec, Inc., Pickering, Ontario, Canada |
| Zero Discharge Decorative Chromium Plating , - 1990, Jaime Maliszewski, Reliable Plating Works, Inc., Milwaukee, WI |
| An Alternative to Landfilling: Recycling Chromium Wastes Through Pyrometallurgical Technology , - 1990, John C. Onuska and R.H. Hanewald, Inmetco, Ellwood City, PA |
| Alternatives to Chromium Electrodeposition , - 1990, Myron Browning, CEF, Rocketdyne., Division of Rockwell International Corp., Canoga Park, CA, and Dr. Philip C. Johnson, VAC-TEC Systems, Inc., Boulder, CO |
| Electroforming, Applications and Directions , - 1990, Cameron Coates, Martin Marietta Energy Systems Inc., Oakridge, TN |
| The Influence of Various Process Variables on the Plating Behavior and Properties of Zinc-Nickel Electroplated Coatings , - 1990, Julie Heitzenrater, Dr. F.H. Guzzetta and T.R. Roberts, Armco Inc., Armco Research Center, Middletown, OH; and T. Ichida, Technical Research Division, Kawasaki Steel Corp., Chiba, Japan. |
| Laboratory Results on High-Speed Zn-Ni Electroplating , - 1990, F.M.Androsch, M. Pimminger and K. Kosters, Voest-Alpine Stahl Linz, GmbH, Linz, Austria |
| Production Technology of Zn-Ni Alloy Electroplated Steel Sheets , - 1990, Tae-Yeob Kim, Jae-Ryung Lee, Duk-Soo Ahn and Jung-Chul Shin, Surface Treatment Department, Research Institute of Industrial Science & Technology, Pohang, Kyungbook, Republic of Korea |
| Effect of Mass Transfer on Zn-Fe Alloy Composition in Continuous Strip Plating , - 1990, Masaru Sagiyama, Masaki Kawabe and Tsutomu Watanabe, NKK Corporation, Steel Research Center, Hiroshima, Japan |
| The Effect of Plating Parameters and Impurities on the Formation of Woodgrain and Aspect on Zn-Fe Electrodeposits , - 1990, S.F. Chen and T.R. Bensinger, National Steel Corporation, Technical Research Center, Trenton, MI |
| On-Line Analysis of Zn and Ni in Alloy Plating Electrolytes and Implementation of Assay-Based Process Control , - 1990, R.G. Herczeg, Homer Research Laboratories, Bethlehem Steel Corporation, Bethlehem, PA; Gary Bauer, Pre-Finish Metals, Walbridge, OH; and R.S. Ramanujam and P. Crummie, PGT/Outokumpu, Princeton Gamma-Tech Inc., Princeton, NJ |
| Metal Dissolution Reactors for Zn-Fe Alloy Electroplating , - 1990, Michael Thorogood, National Steel Corporation, Technical Research Center, Trenton, MI |
| Electro Reduction of Ferric Ions (ERF) , - 1990, Toshikatsu Hamano, Process Development Dept., Asahi Glass Co., Ltd., Chiba, Japan |
| Dissolution of Zinc Shot in Electrogalvanizing Solutions , - 1990, C.Bowen, P. Claessens and S. Belisle, Noranda Technology Centre, Point-Claire, Quebec, Canada |
| Metal Recovery from Electrogalvanizing Process Streams , - 1990, Craig Brown, Eco-Tec Inc., Pickering, Ontario, Canada; Gary Bauer, Pre-Finish Metals, Inc., Walbridge, OH; and Charles Hughes, Homer Research Laboratories, Bethlehem Steel Corporation, Bethlehem, PA |
| A Zinc Recovery Technique for Electrogalvanizers , - 1990, Stanley Karrs and Philip Fatula, Lancy International, Inc., Warrendale, PA |
| Zinc-Nickel Hydroxide by Product Recycling , - 1990, Roger Harrison, Hall Chemical Company, Wickliffe, OH |
| Treatment of Nickel-Zinc-Iron Effluents: Hydrolysis, Recovery and Recycling Alternatives , - 1990, Raymond Hsieh and H. Wayne Richardson, CP Chemicals, Inc., Sumter, SC |
| A New Electrolyte For the Tin-Plate Industry, - 1990, George Federman, LeaRonal, Freeport, NY |
| Radial Jet Technology: A Novel Technique for Continuous Strip Plating , - 1990, B.K. Paramanathan and E. Nagel Soepenberg, Div. of Surface & Fabrication Technology of Cold-Rolled & Coated Products, Hoogovens Groep B.V., IJmuiden, The Netherlands |
| Properties of Tin-Plated Steel Strip Produced Using the Methane Sulfonate Electrolyte and Radial Jet Cell , - 1990, [no author] |
| The Use of Turbulence Models for the Study of Hydrodynamic Behavior of Electrodeposition Cells , - 1990, J.C. Monnier and B. Rouault, Acieries et Laminoirs de Beautor, La Fere, France; M. Stanislas, Institut de Mecanique des Fluides de Lille, Lille, France; and A. Weymeersch, Cockerill Sambre, Jemmepes, Belgium |
| A Study on the Transfer of High Current to Conductor Rolls , - 1990, Teruo Mori, Mori Metalfinishing, Fujieda, Japan |
| Chemical and Electrochemical Stability of Lead-Silver Anodes in Zinc Sulfate and Low Chromium Solutions , - 1990, Falcioni, A. Giannetti, P. Miceli and G. Todarello, Centro Sviluppo Materiali SpA, Rome, Italy |
| Alkaline Cleaning of Oiled Steel Sheet , - 1990, L.E. Helwig and E.J. Helwig, USS Research, Technical Center, Monroeville, PA |
| Characterization and Control of Coating Defects in Electrogalvanized Sheet Steel , - 1990, C.R. Shastry, R.K. Singh and Dr. S.G. Fountoulakis, Homer Research Laboratories, Bethlehem Steel Corporation, Bethlehem, PA |
| Evaluation of Phosphate Coatings on Steel , - 1990, Jeong-Real Park, Sang-Heon Kim and Hyun-Tae Kim, Surface Treatment Department, Research Institute of Industrial Science & Technology, Pohang, Kyungbook, Republic of Korea |
| Status Report of Operations of Double Eagle Steel Coating Company and History of New Product Development , - 1990, W.R. Johnson and L.E. Pfister, USS Research, Technical Center, Monroeville, PA, and L.H. Chudereweicz and J.O. Stoddart, Double Eagle Steel Coating Co., Dearborn, MI |
| Report on Changes at the Walbridge Coatings' Electrogalvanizing Line , - 1990, Dr. J. Carbajal, Inland Steel Company, Research Laboratories, East Chicago, IN |
| Development of a Continuous Process for Aluminum Alloy Electroplating from Molten Salt , - 1990, Y. Yamamoto, T. Tsuda, J. Uchida, H. Seto, A. Shibuya, R. Noumi and S. Fujita, Sumitomo Metal Industries, Ltd., Amagasaki City, Japan, and K. Yanagi, T. Taguchi and J. Yoneda, Mitsubishi Heavy Industries, Ltd., Hiroshima, Japan |
| Electroformed X-Ray Mirrors from Lacquer-Polished Masters , Oct - 1990, Melville P. Ulmer, Rudy Haidle, and Robert Altkorn |
| Smoke-Pattern Analysis Solves Plating Problems , Oct - 1990, Ken Simonelic, P.E. |
| The Anatomy of a Copper Anode , Oct - 1990, W. Chuck Walker |
| Chemical Silver Plating on Carbon Fibers , May - 1990, H.M. Cheng, B.L. Zhou, Z.G. Zheng, C.M. Wang and C.X. Shi |
| A Tale of Three Refiners Refining--An Ancient Art, Craft & Vocation , Jul - 1990, Hrant Shoushanian and Alfred M. Weisberg |
| Duplex Zinc-Nickel Alloy Electrodeposits , Dec - 1990, C.H. Huang |
| Effect of Surface Crystallography on Adsorption Of Organic Additives at Gold Electrodes Research Project #74 , Jul - 1990, A. Iannelli, J. Richer, L. Stolberg and J. Lipkowski |
| Plating Plastics with Electroless Nickel in a Bath Containing Boron Hydride Hydrazine , Jan - 1990, W. Reksc and A. Idziak |
| 3061. Iron Matrix Composite Coatings , Aug - 1990, Shiying Chen and Jingying You |
| A Tale of Three Refiners , Jul - 1990, Hrant Shoushanian and Alfred M. Weisberg |
| Precious Metal Refining--Converting Scrap to Money A Plating and Sur. Fin. Staff Report, Jul - 1990, [no author] |
| Investigation of Anodic Decomposition Products in Sulfamate Solutions , Jul - 1990, Jiazhu Li, Haiyan Zhang and Liangyu Zeng |
| Direct Electroless Copper Plating on Alumina Ceramics , Jun - 1990, Hideo Honma and Yasunori Kouchi |
| Electrodeposition of Silver-Copper Alloys from Iodide Solutions , Jun - 1990, Wladyslaw Reksc and Tomasz Mrugalski |
| Applying Microcomputers to the Analysis of Waste Treatment and Recovery Processes , Jun - 1990, Clifford W. Walton, CEF, and Gregg L. Poppe |
| Gold Plating Optimization For Tape Automated Bonding , Sep - 1990, James Traut, Judy Wright and Jeannie Williams |
| The Application of Engineering Principles to the Practice of Electroplating 31st William Blum Lecture , Sep - 1990, Huk Y. Cheh |
| Recent Advances in Rectifier Design and Control , Aug - 1990, Christopher C. Smith |
| How Clean is Clean? A Quantitative Answer , Aug - 1990, Mantosh K. Chawla |
| Electrochemical Assessment of Sn-Pb Solderability , Aug - 1990, D.M. Tench and D.P. Anderson |
| An Electroformed Nickel-Sulfur Alloy for a Nose Cone , Jun - 1990, W.D. Bonivert, H.A. Johnsen and J.T. Hachman |
| A New Fluoride Resistant Ceramic Electrode for Electrochemical Effluent Treatment Processes , Jul - 1990, Steven K. Harnsberger and Iren Romoda |
| Ni-Cr-P Plating Bath Analysis by Ion Chromatography , Aug - 1990, R. E. Faxel, Jr. and R. E. White |
| Evaluation of Electroformed Copper for Shaped Charge Applications , Aug - 1990, J.W. Dini and W.H. Gourdin |
| High-Temperature Ni-Mo Electrodeposited Alloys - Structure and Properties , Aug - 1990, E. Chassaing, K. Vu Quang, M. E. Baumgartner, M. Funk and Ch. J. Raub |
| Decomposition and Assay of Gelatin in a Copper Plating Bath , Sep - 1990, Nobuyuki Koura, Akane Tsutsumi and Kunihiro Watanabe |
| Phosphorus Content and Heat Treatment Effects on the Corrosion Resistance of Electroless Nickel , Sep - 1990, K. S. Rajam, Indira Rajagopal and S. R. Rajagopalan |
| The Formation of Films of MoS2 by Sputtering and Sulfidizing , Jul - 1990, J.C. Wang, M.T. Hepworth and K.J. Reid |
| Determination of the Phosphorus Content of Ni-P Alloys , Sep - 1990, E. Toth-Kadar, I. Bakonyi, J. Loranth, A. Solyom, L. Pogany, T. Dankhazi, J. Toth, G. Konczos, P. Fodor and H. H. Liebermann |
| Properties of Pulse-Plated Hard Chromium from a Self-Regulating Bath , Sep - 1990, S.H. Han, D.Y. Chang and S.C. Kwon |
| Future Trends in Precious Metal Decorative Plating , - 1990, Stewart Hemsley and Linda Mayer, Engelhard Corporation, East Newark, NJ |
| Precious Metal Plating for the Automotive Industry , - 1990, Jim DiNunzio, Tanury Industries, Lincoln, RI |
| Sputtered Deposition for Decorative Applications , - 1990, George M. Wityak, Handy & Harman, Fairfield, CT |
| A Novel Approach to Electroforming Karat Gold Jewelry , - 1990, Kathleen Miscioscio, Sel-Rex, OMI International, Nutley, NJ |
| Electroforming of Jewelry , - 1990, Dr. Franz Simon, Degussa AG, Schwabisch Gmund, West Germany |
| Specifications and Standards for Anodized Finishes Benjamin , - 1990, Yaffe, Bey Consultants, Inc., Farmington, MI |
| Durability Evaluation of Aluminum Finishes Using Natural and Accelerated Environmental Testing , - 1990, Michael J. Crewdson, Sub-Tropical Testing Service, Miami, FL |
| A Study of Sealing Time and Electrolyte Temperature on the Seal Quality of Black Anodized Aluminum , - 1990, Amy Kekeisen, NASA, Goddard Space Flight Center, Greenbelt, MD |
| Electrochemical Method to Control the Anodizing Process , - 1990, Albert Ventura, Camprodom, Barcelona, Spain |
| Metallurgical and Chemical Considerations for Barrel Plating Zinc Die Castings to Withstand Prolonged 200ø C Temperature and Possess High Corrosion Resistance While Maintaining Close Tolerances , - 1990, Robert P. Sica and Allan Cook, New Brunswick Plating, Inc., New Brunswick, NJ |
| New Method for Plating on Molybdenum , - 1990, Sue Troup, CEF, Hughes Research Laboratories, Malibu, CA |
| Electrochemical Behavior of Nickel Plating in Various Corrosive Conditions for the Study of Service Life Prediction , - 1990, Sermkiat Jomjunyong, M. Fujita, S. Yokoyama and S. Matsumoto, Dept. of Mechanical Engineering, Musashi Institute of Technology, Tokyo, Japan |
| Prediction of the Service Life of Bright Nickel-Chromium Plated Steel Panels Subjected to the CASS Test , - 1990, Minoru Fujita, S. Jomjunyong, S. Yokoyama and S. Matsumoto, Dept. of Mechanical Engineering, Musashi Institute of Technology, Tokyo, Japan |
| Electrodeposition of Tin-Base Alloys , - 1990, V.N. Kudryavtsev, K.M. Tyutina, A.N. Popov and S.A. Maksimenko, Moscow Mendeleyev Institute of Chemical Technology, Moscow, USSR |
| Electrodeposition and Some Properties of Ni-Co-P-Si3N4 Dispersion Coating , - 1990, N. Furukawa, S. Noya and T. Hayashi, Department of Applied Chemistry, University of Osaka Prefecture, Sakai, Osaka, Japan |
| Quantitative Investigations of the Adsorption of Pyridine at the Ag-aqueous Solution Interface , - 1990, S. Morin, A. Hamelin, J. Richer and J. Lipkowski, Department of Chemistry, University of Guelph, Guelph, Ontario, Canada |
| Adsorptive Filtration for Treatment and Recovery of Plating Wastes , - 1990, Mark M. Benjamin, Jungers Professor of Civil Engineering, University of Washington, Seattle, WA |
| Electrochemical Evaluation of Zinc Deposition from Acid Chloride Electrolyte , - 1990, J.H. Lee, H. Sun and T.J. O'Keefe, Department of Metallurgical Engineering and Graduate Center for Materials Research, University of Missouri-Rolla, Rolla, MO |
| Mechanism and Control of a Zinc-Nickel Plating Bath , - 1990, Peter Klos, Lever Sutter GmbH, Trebur, West Germany |
| Static Friction Between Ti-6Al-4V and 6061-T6: Effect of Aluminum Surface Treatments* , - 1990, Daniel B. Dawson, Sandia National Laboratories, Livermore, CA |
| Anodizing of Aluminum with Micro Explosive Air Agitation , - 1990, Hiroyuki Satoh, Okuno Chemical Industries, Ltd., Osaka, Japan |
| Specific Characteristics of Distortion of DC Waveform in Aluminum Anodizing by Use of SCR , - 1990, Toshiharu Nakai, Shikoku Electric Company, Ltd., Taito-ku, Japan |
| New Non-Nickel Seal Processes for Anodized Aluminum , - 1990, Anthony Ita, Novamax Technologies Inc., Atlanta, GA |
| A Proposed New SAE Specification for Anodized Aluminum (No. J1974) , - 1990, Dr. Dan Fern, Alcan International,Ltd., Kingston, Ontario, Canada |
| An Algorithm for the Identification of Defects in Anodic Coatings, - 1990, Arthur W. Brace, Hi-Tek Products Ltd., Stonehouse, Gloucester, UK |
| Modern Approaches to the Sequential Determination of Ion Concentrations in Plating Baths , - 1990, Dennis H.Calsin, Radiometer America, Inc., Westlake, OH |
| How Clean is Clean? A Quantitative Answer , - 1990, Mantosh K. Chawla, Photo Acoustical Technology, Inc., Westlake Village, CA |
| Cathode pH Measurement Technique , - 1990, L.T. Romankiw, IBM Research Division, T.J. Watson Research Center, Yorktown Heights, NY |
| Effect of Near-Surface pH on Electrodeposition of Nickel on a Rotating Fine Mesh Electrode, - 1990, H. Deligianni and L.T. Romankiw, IBM Research Division, T.J. Watson Research Center, Yorktown Heights,NY |
| Simple Cell For Electrochemical Gravimetry, - 1990, K. Keiji Kanazawa, G. Borges, and S. Doss, IBM Almaden Research Center, San Jose, CA |
| Analytical Applications of Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry for Environmental Monitoring & Process Control , - 1990, Dr. David Stern, Leeman Labs., Inc., Lowell, MA |
| AESF Project 68 - Selective Pulse Plating , - 1990, Dr. D-T. Chin, N.R.K. Vilambi, M. Sunkara and D. Balamurugan, Department of Chemical Engineering, Clarkson University, Potsdam, NY |
| Interfacial Phenomena in the Iron-Zinc System , - 1990, L.A. Giannuzzi, Dr. H.W. Pickering, P.R. Howell and Dr. W.R. Bitler, College of Earth & Mineral Sciences, Dept. of Materials Science, Pennsylvania State University, University Park, PA |
| Evaluation of an Electrochemical Sensor for Plating Solutions , - 1990, Tianying Mi, Chi-Jin Chen, Dr. Robert F.Savinell and Chung-Chiun Liu, Department of Chemical Engineering, Case Western Reserve University, Cleveland, OH |
| AESF Project 72C - Copper Electroplating of GaAs and InP Wafers; InAs Electrodeposition Experiments , - 1990, Professor Ch.J. Raub, Forschungsinstitut fur Edelmetalle und Metallchemie, Schw„bisch Gmnd, West Germany |
| Statistical Process Control of Organics in Plating Baths Using Cyclic Voltammetric Stripping Analytical Methods , - 1990, Albert Block and Anita Murray, Texas Instruments, Inc., Austin, TX |
| Computer Simulation of CVS Brightener Analysis, - 1990, David A. Russell, Digital Equipment Corporation, Greenville, SC |
| Effects of Organic Additive Concentrations on the Mechanical Properties of Electroplated Copper , - 1990, Fritz Byle, Marquette Electronics, Milwaukee, WI, and Dr. Peter Bratin, ECI Technology, East Rutherford, NJ |
| Electrochemical Assessment of Sn-Pb Solderability , - 1990, Dennis Tench and D.A. Anderson, Rockwell International Science Center, Thousand Oaks, CA |
| Application of Statistical Process Control to Gold Plating , - 1990, William P. Thomas, N.R. Townsley, G.A. Cook and M.B. Zirkes-Falco, Hughes Aircraft Company, Los Angeles, CA |
| Statistical Process Control: Assignable Causes and Data Forecasting , - 1990, Dr. Thomas Tam and Dr. Paul Scherer, Lockheed Missiles and Space Co., Inc., Sunnyvale, CA |
| Bath Control and Process Window Definition for an Acid Copper Electroplating System , - 1990, Johnathan Reid, Terry Rogelstad and Tammy Entringer, IBM Corp., Endicott, NY |
| The Challenges of Finishing for the Electronics Industry , - 1990, Kathleen Miscioscio, Sel-Rex, OMI International, Nutley, NJ |
| A Novel Machine for Tin or Tin-Lead Plating of Encapsulated Semiconductor Leadframes , - 1990, P.W. Meuldijk, Meco International B.V., Holland |
| How to Make Component Lead Solderable , - 1990, J. Gordon Davy, Westinghouse Electronic Systems Group, Baltimore, MD |
| Studies on Tin Alloy Coatings Using XPS/AES and the Relationship to Solderability Professor , - 1990, Ruifang Zhuang and Wan Kefei, Coordination Chemistry Institute, Nanjing University, Nanjing, China |
| New Pure Gold Electrolytes for Semiconductor Applications , - 1990, Franz Simon, Degussa AG, Schwäbisch Gmünd, West Germany |
| Laser-Induced Metal Deposits on Semiconductors , - 1990, W. Paatsch, W. Kautck and N. Sorg, Bundesanstat fur Materialforschung und Prufung (BAM), Berlin, West Germany |
| Use of Forecast Algorithms for Process Variable Control , - 1990, James J. Childs, Jr., AT&T, Richmond, VA |
| Real-Time Computer Statistical Control in a Job Shop , - 1990, Gary Mest, Pottstown Plating Works, Pottstown, PA |
| Increased Efficiency Through Use of Random Access Hoist Controls , - 1990, Arthur Kowalski, CEF, Keeler Brass Company, Grand Rapids, MI |
| The Practical Aspects of Bar Coding in the Surface Finishing Industry and Future Trends Toward Paperless Transactions , - 1990, Michael D. Rose, Varland Metal Service, Inc., Cincinnati, OH |
| Computer Controlled Rectifiers , - 1990, Peter Cambria, Rapid Power Technologies, Brookfield, CT |
| Mechanism of Electroless Nickel Deposition and its Utilization in Expert Systems, - 1990, Armin Gemmler, Thomas Bolch and Hans Gut, FhG - Institute of Manufacturing Engineering and Automation, IPA, Stuttgart, Germany |
| Waste Reduction: A People Management Approach , - 1990, Gary Hunt, North Carolina Department of Environmental Management, Raleigh, NC |
| Air Force Engineering and Services Center's Program for Hazardous Waste Minimization in the Electroplating Shop , - 1990, Charles J. Carpenter, P.E., Department of the Air Force, Tyndall AFB, FL |
| An Evaluation of Technologies, Strategies and Economics for Managing Electronic Industry Wastes, - 1990, Dr. Bernard Fleet, University of Toronto, Toronto, Ontario, Canada, and TRSI Inc., Sacramento, CA, and Mark Kowalski, Aeroscientific-DDL, Anaheim, CA |
| Centralized Metals Recovery from Plating and Metal Finishing Wastes , - 1990, Dr. Peter G. Garside, Xcel Group, Inc., Milwaukee, WI |
| The Economic Case for Recycling F006 of Wastewater Treatment Sludges for the Plating Industry , - 1990, S. Wayne Rosenbaum and Harold Rajevic, Recontek Resource Conservation Technology, San Diego, CA |
| Metals Recovery from Industrial Sludges , - 1990, C.A. Neal, Idaho Research Complex, Idaho Falls, ID |
| Metastable Nickel-Tin Intermetallic Compound in Tin-Based Coatings , - 1990, Joseph Haimovich and David Kahn, Integrated Plating Systems, AMP Inc., Harrisburg, PA |
| Electrolytic Deposited NiP Layers as Base for Contact Surfaces , - 1990, Dr. Jacky Vanhumbeeck, Siemens n.v., Oostkamp, Belgium |
| High Performance Neutral Nickel-Phosphorus Plating Baths , - 1990, C.A. Holden, Dr. H.H. Law and J. Sapjeta, AT&T - Bell Laboratories, Inc., Murray Hill, NJ |
| Wear Reliability of Gold-Flashed Palladium vs. Hard Gold on a High-Speed Jack System , - 1990, E.J. Kudrak, I. Kadija, J.J. Maisano and J.A. Abys, AT&T - Bell Laboratories, Inc., Murray Hill, NJ |
| Electroplating of Thick and Ductile Palladium , - 1990, I. Kadija, V. Chinchankar, V.T. Eckert, H.K. Straschil, E.J. Kudrak, J. Maisano and J.A. Abys, AT&T - Bell Laboratories, Inc., Murray Hill, NJ |
| Environmental Performance of Electronic Surfaces , - 1990, Simeon J. Krumbein, AMP Inc., Harrisburg, PA |
| CVD Coated Cemented Carbide Cutting Tools , - 1990, Thomas E. Hale and D.E. Graham, Sr., Carboloy, Inc., Warren, MI |
| Cathode Arc and Sputter Deposition of Decorative Coatings, - 1990, Dr. Philip C. Johnson, Vac-Tec Systems, Inc., Boulder, CO |
| Coated Carbides Used in Milling , - 1990, Dean R. Edwards, Ingersoll Cutting Tool Company, Rockford, IL |
| CVD Tungsten Carbide and Titanium Carbide Tribological Coatings , - 1990, D. Garg, P.N. Dyer, J.J. Sheridan and S.M. Fine, Air Products and Chemicals, Inc., Allentown, PA |
| Combined Hard Chrome Plating and Ion Implantation for Improving Tool Life , - 1990, Ralph B. Alexander, Ion Surface Technology, Inc., Clawson, MI |
| Ion Vapor Deposited Coatings for Improved Corrosion Protection , - 1990, Graham Legge, Abar Ipsen Industries, Feasterville, PA |
| Solvent Substitution with Non-Chlorinated Biodegradable Solvents , - 1990, A.A. Chavez, Idaho Research Complex, Idaho Falls, ID |
| Substance Tacking and Production Unit Classification Under the Toxics Use Reduction Act , - 1990, Timothy Greiner, Department of Environmental Management, Office of Safe Waste Management, Boston, MA |
| The Seven Crucial Issues of Ion-Exchange , - 1990, J. Michael Hosea, Patrick M. Nelis, Michael D. Mayne and David K. Seibold, Bio-Recovery Systems, Inc., Las Cruces, NM |
| Laser-Enhanced Jet Electroplating , - 1990, Dr. David Glenn, Idaho Research Complex, Idaho Falls, ID |
| Reclaiming Metals from Aqueous Wastes by a Liquid Ion Exchange/Solvent Extraction Process , - 1990, Paul Osley, UNC Reclamation, Norwich, CT |
| Civil and Criminal Liability of Corporate Officers, Directors and Shareholders Under Federal and State Environmental Laws, - 1990, Dean Cordiano, Day, Berry & Howard, Boston, MA |
| State of the Art in Chemical Pretreatment Technology , - 1990, Robert F. Ayres, R.F. Ayers and Associates, Beaver, PA |
| Utilizing Liquid Cleaners in the Metal Finishing Industry , - 1990, Stephen F. Rudy, Frederick Gumm Chemical Company, Inc., Kearny, NJ |
| Organics on Small Parts--Where We Are and Where We are Going , - 1990, Terry Maurer, Maurer-Shumaker, Inc., Livonia, MI |
| Combination Chromium/Phosphate Polymer for Metal Surfaces , - 1990, David J. Halverson and Mark A. Ruhland, Birchwood Casey, Division of Birchwood Laboratories, Inc., Eden Prairie, MN |
| The Challenge of Reducing VOC's in the Aerospace Coatings Industries , - 1990, Alan Schoeder, DeSoto, Inc.,Berkeley, CA |
| TCE Removal System , - 1990, Edward M. Walker, Industrial Consultants, Industry, PA |
| Battling Fastener Corrosion with Organic Coatings , - 1990, Chuck Williams, Elco Industries, Inc., Rockford, IL |
| Practical Recent Hard Gold Plating Developments for the Electronic Industries , - 1990, Jean A. Lochet, Vanguard, South Plainfield, NJ |
| Electroplating of Thick and Ductile Palladium-Nickel Alloy , - 1990, H.K. Straschil, I. Kadija, V.T. Eckert, C. Wolowodiuk, J. Maisano and J.A. Abys, AT&T - Bell Laboratories, Inc., Murray Hill, NJ |
| Distribution of Precious Metal Electrodeposits, - 1990, Ronald Morrissey, Technic, Incorporated, Providence, RI |
| Achieving Zero Discharge in Tin-Lead Operations Through the Use of Ion Exchange and Electrowinning Technology , - 1990, David Chew, CEF, Kinetico Incorporated, Engineered Systems Division, Newbury, OH |
| A Replacement for Electroless Copper in PWB Manufacturing , - 1990, Frank Polakovic, Olin Chemicals, New Haven, CT |
| Adhesion, Solderability, and Productivity: Next Generation PTH , - 1990, Cheryl A. Deckert, Shipley Company, Inc., Newton, MA |
| Determination of Low Levels of Ammonia in Electroless Copper Plating Solutions , - 1990, Nicholas M. Martyak and Bruce McDuffie, University Center at Binghamton, State University of New York, Binghamton, NY |
| Waste Treatment Process for Electroless Copper , - 1990, Jerry D. Holly, Tektronix, Inc., Forest Grove, OR |
| Bendable PWB Laminate: Properties, Fabrication, and Applications , - 1990, Donald Greene, Rogers Corporation, Rogers, CT |
| Introduction to Molded Circuit Boards , - 1990, Gerry Podesta, GE Plastics, Pittsfield, MA |
| Problems of Forecasting and an Overview of Current Market for PWBs , - 1990, R.E. Pritchard, IPC, Lincolnwood, IL |
| Opportunities for Advanced Electrocomposites , - 1990, Dr. S.G. Fishman, Scientific Office of Naval Research, Arlington, VA |
| Metal Matrix Composites: I. Reinforcement Methods and Composite Properties , - 1990, Dr. B.T. Rodini and Dr. Carl Zweben, General Electric Astro Space Division, King of Prussia, PA |
| Metal Matrix Composites: II. Fabrication Methods and Applications , - 1990, Dr. B.T. Rodini and Dr. Carl Zweben, General Electric Astro Space Division, King of Prussia, PA |
| Electroplating, Electroless Plating and Electroforming , - 1990, J.W. Dini, Lawrence Livermore National Laboratories, Livermore, CA |
| The Status of Electrocomposites , - 1990, Chris Johnson, National Institute of Standards and Technology, Gaithersburg, MD, and Myron Browning, CEF, Rocketdyne, Div. of Rockwell International, Canoga Park, CA |
| The Emergence of Composite Electroless Coatings , - 1990, Dr. Nathan Feldstein, Surface Technology, Inc., Princeton, NJ |
| Properties of Electroless Nickel Coatings: The Effect of Deposit Composition , - 1990, Ronald N. Duncan, Palm Specialty Products, Inc., Nashville, TN |
| Unsuspected Factors That Affect EN Plate Quality , - 1990, George T. Miller, Occidental Chemical Corporation Technology Center, Grand Island, NY |
| Electroless Nickel No Longer Just "A" Coating , - 1990, Milt Stevenson, Anoplate Corporation, Syracuse, NY |
| How Sodium Orthophosphite Effects X-Ray Fluorescent Readings , - 1990, Stephen E. Penik, Vanguard Cemco Inc., South Plainfield, NJ |
| Characterization of Chromium-Electroless-Nickel Coatings , - 1990, N.M. Martyak and B. Carter, M&T Chemicals, Inc., Somerville, NJ, and Dr. R. Weil, Stevens Institute of Technology, Hoboken, NJ |
| Diamond Tool Wear of Electrodeposited Nickel-Phosphorus Alloy, - 1990, J.W. Dini, R.R. Donaldson, and C.K. Syn, Lawrence Livermore National Laboratories, Livermore, CA, and D.J. Sugg, Techmetals, Inc., Dayton, OH |
| The Thermal Ratchet in Graphite Fiber/Nickel Matrix Composites, - 1990, R.V. Sara, UCAR Carbon Company, Parma Technical Center, Parma, OH |
| Iron Matrix Antifriction Composite Coatings , - 1990, Professor Chen Shiying and You Jingying, Department of Management Science and Engineering, Hohai University, Nanjing, Peoples Republic of China |
| Metal Coated Fibers for Metal Matrix Composites , - 1990, Dr. George B. Park, American Cyanamid Company, Stamford, CT |
| Continuous SiC Fiber Reinforced Metals , - 1990, Melvin Mittnick, Textron Specialty Materials, Lowell, MA |
| Strategies for Electroless Nickel Plating of Aluminum , - 1990, Eugene Yarkosky, Paul Schultz, and Don Affeldt, Enthone, Inc., New Haven, CT |
| Application and Control of Electroless Nickel Processes at Northwest Airlines , - 1990, Richard H. Keene, Northwest Airlines, Inc., Fayetteville, GA |
| Double Layer Plating from a Single Plating Bath , - 1990, F. Matsui, I. Nakayama, H. Uchida, T. Otaka, and T. Kawakubo, C. Uyemura & Company, Ltd., Tokyo, Japan |
| Corrosion Performance Optimization of Electroless Nickel Plating on Aluminum Substrates , - 1990, Martin Bayes and Robert Ellis, Shipley Company, Newton, MA |
| Quality Electroless Nickel Plating Through Statistical Process Control , - 1990, D.J. Sugg, Techmetals, Inc., Dayton, OH |
| Electroless Nickel--State of the Art , - 1990, Konrad Parker, Consultant, Park Ridge, IL |
| Technique for Evaluating Electroplating Into Small Through-Holes of Printed Wiring Boards , Jul - 1990, Turner, D.R. A |
| Electrodeposited PbO2 Anode For the Decomposition Of Low Concentrations of Cyanide, Nov - 1990, Ten-Chin Wen |
| Continuous Deionization for Electrocoating Applications, Sep - 1990, Michael R. Pacek |
| Finishers' Think Tank, Jan - 1990, Marty Borruso |
| The Substitution of Ion Vapor Deposited (IVD) Aluminum for Cadmium, - 1990, Holmes, V. L. and Reilly, J. J. |
| Development of a Semi-Aqueous Cleaning Agent for Metal Cleaning Applications, - 1990, Lermond, David S |
| The Application of Engineering Principles
to the Practice of Electroplating -- The 31 th William Blum Lecture, Jun - 1990, Dr. Huk Y. Cheh |
| The 31st William Blum Lecture, The Application of Engineering Principles to the Practice of Electroplating, - 1990, Dr. Huk Y. Cheh |
| Analytical Review : Spectrophotometric Methods - Part 1 , Colorimetry And Uv-Vis Spectroscopy, FEB - 1989, RODGERS, T. |
| Thermoanalytical Studies Of Anodic Oxide Coatings On Aluminum, FEB - 1989, SHARMA, A. |
| Comparison Of Some Mechanical And Corrosion Properties Of Electroless And Electroplated Nickel - Phosphorus Alloys, FEB - 1989, WEIL, R. |
| The Effects Of Shields And Baffles On The Distribution Of Chromium Electrodeposits, MAR - 1989, KNILL, E. |
| Hazardous Waste Minimization At A Brass Wire Mill, APR - 1989, PARDUS, M. |
| Microcracks In Hard Chromium Electrodeposits, APR - 1989, JONES, A. |
| Structure Of Electroless Nickel Deposits From Baths Containing Sodium Hypophosphite And Potassium Borohydride, MAY - 1989, EL-MALLAH, T. |
| Surface Analysis Of Zinc Alloy Immersion Films On Aluminum, JUN - 1989, MONTEIRO, F. |
| The Effects Of Duty Cycle And Frequency On The Crystal Size Of Pulse-Plated Gold, AUG - 1989, QI-XIA, Y. |
| What's New In Surface Finishing? : Patents And Select Literature Citations : Electroplating Copper On Aluminum, OCT - 1989, KARUSTIS, G. |
| Removal of Metal Cations from Chromium Plating Solutions, January - 1989, Cushnie, George C. |
| Discovery, Jan - 1989, W.H. Safraneck |
| Finisher's Think Tank, Feb - 1989, Ronald Kornosky |
| Finisher's Think Tank, Feb - 1989, Ronald Kornosky |
| Finisher's Think Tank, Feb - 1989, Ronald Kornosky |
| Finisher's Think Tank, Feb - 1989, Ronald Kornosky |
| Finisher's Think Tank, Feb - 1989, Ronald Kornosky |
| Finisher's Think Tank, Feb - 1989, Ronald Kornosky |
| Finisher's Think Tank, Mar - 1989, Ronald Kornosky |
| Finisher's Think Tank, Mar - 1989, Ronald Kornosky |
| Finisher's Think Tank, Mar - 1989, Ronald Kornosky |
| Finisher's Think Tank, Mar - 1989, Ronald Kornosky |
| Finisher's Think Tank, Apr - 1989, Ronald Kornosky |
| Finisher's Think Tank, Apr - 1989, Ronald Kornosky |
| Finisher's Think Tank, Apr - 1989, Ronald Kornosky |
| Finisher's Think Tank, Apr - 1989, Ronald Kornosky |
| Finisher's Think Tank, Apr - 1989, Ronald Kornosky |
| Finisher's Think Tank, Apr - 1989, Ronald Kornosky |
| Finisher's Think Tank, May - 1989, Ronald Kornosky |
| Finisher's Think Tank, May - 1989, Ronald Kornosky |
| Finisher's Think Tank, May - 1989, Ronald Kornosky |
| Finisher's Think Tank, May - 1989, Ronald Kornosky |
| Finisher's Think Tank, May - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jun - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jun - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jun - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jun - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jun - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jun - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jul - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jul - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jul - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jul - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jul - 1989, Ronald Kornosky |
| Finisher's Think Tank, Aug - 1989, Ronald Kornosky |
| Finisher's Think Tank, Aug - 1989, Ronald Kornosky |
| Finisher's Think Tank, Aug - 1989, Ronald Kornosky |
| Finisher's Think Tank, Aug - 1989, Ronald Kornosky |
| Finisher's Think Tank, Aug - 1989, Ronald Kornosky |
| Finisher's Think Tank, Oct - 1989, Ronald Kornosky |
| Finisher's Think Tank, Oct - 1989, Ronald Kornosky |
| Finisher's Think Tank, Oct - 1989, Ronald Kornosky |
| Finisher's Think Tank, Oct - 1989, Ronald Kornosky |
| Finisher's Think Tank, Oct - 1989, Ronald Kornosky |
| Finisher's Think Tank, Nov - 1989, Ronald Kornosky |
| Finisher's Think Tank, Nov - 1989, Ronald Kornosky |
| Finisher's Think Tank, Nov - 1989, Ronald Kornosky |
| Finisher's Think Tank, Nov - 1989, Ronald Kornosky |
| Finisher's Think Tank, Nov - 1989, Ronald Kornosky |
| Finisher's Think Tank, Nov - 1989, Ronald Kornosky |
| Finisher's Think Tank, Nov - 1989, Ronald Kornosky |
| Learning From Others, Nov - 1989, Frank Altmayer |
| Watt's On First, Dec - 1989, W.H. Safraneck |
| Finisher's Think Tank, Dec - 1989, Ronald Kornosky |
| Finisher's Think Tank, Dec - 1989, Ronald Kornosky |
| Finisher's Think Tank, Dec - 1989, Ronald Kornosky |
| Finisher's Think Tank, Dec - 1989, Ronald Kornosky |
| Learning From Others: Part II, Dec - 1989, Frank Altmayer |
| Finisher's Think Tank, Apr - 1989, Ronald Kornosky |
| Finisher's Think Tank, Apr - 1989, Ronald Kornosky |
| Finisher's Think Tank, Apr - 1989, Ronald Kornosky |
| Finisher's Think Tank, Apr - 1989, Ronald Kornosky |
| Finisher's Think Tank, Mar - 1989, Ronald Kornosky |
| Finisher's Think Tank, Mar - 1989, Ronald Kornosky |
| Finisher's Think Tank, Mar - 1989, Ronald Kornosky |
| Finisher's Think Tank, Mar - 1989, Ronald Kornosky |
| Finisher's Think Tank, Feb - 1989, Ronald Kornosky |
| Finisher's Think Tank, Feb - 1989, Ronald Kornosky |
| Finisher's Think Tank, Feb - 1989, Ronald Kornosky |
| Finisher's Think Tank, Feb - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jan - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jan - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jan - 1989, Ronald Kornosky |
| Finisher's Think Tank, Jan - 1989, Ronald Kornosky |
| Nickel Electroforming of Very Large Items , - 1989, J.R. Logsdon, EMF Corporation, Colorado Springs, CO |
| Electroforming of Perforated Products , - 1989, W.E. McHugh, Stork Veco International, Brookline, MA |
| Examples of Electroforming with Controlled Low-Stress Nickel Sulfamate , - 1989, Arthur Wasserman, Plating Consultant, New York, NY |
| Principles & Applications of Electroformed Composites (for Engineering Components) , - 1989, Myron Browning, CEF, Rocketdyne, Div. of Rockwell International, Canoga Park, CA, and V. Peter Greco, Amsterdam, NY |
| Functional Deposits from Solutions of Ions , - 1989, William Ullrich, Hospital for Special Surgery, New York, NY |
| Evaluation of Electroformed Copper for Shaped Charge Applications , - 1989, J.W. Dini and W.H. Gourdin, Lawrence Livermore National Laboratory, Livermore, CA |
| Fabrication of an Explosive Driven Linear Magnetic Flux Generator , - 1989, C.P. Steffani, Lawrence Livermore National Laboratory, Livermore, CA |
| Modeling of the Current Distribution of an Electroplated Precision Optical Component , - 1989, Dr. George Kline, Udylite/OMI International Corp., Warren, MI |
| Electroforming in India , - 1989, N.V. Shanmugam, S. John, S. Guruviah and K.I. Vasu, Central Electrochemical Research Institute, Karaikudi, India |
| Electroformed Mixed Media Assemblage Jewelry , - 1989, Dr. Robert Coleman, Coleman Design Enterprises, Angels Camp, CA |
| A Novel Approach to Electroforming Karat Gold Jewelry , - 1989, Guy Desthomas and Kathy Miscioscio, Sel-Rex Plating Systems, OMI International, Nutley, NJ |
| Application of Gold--Electroforming in Dentistry--A New, Fully Automatic Electroforming Technology to Produce Gold/Ceramic Crowns , - 1989, Thomas Bolch and Dr. Gemmler, FhG-IPA Stuttgart, West Germany; G. Gramm, Gramm OFT, Heimerdingen, West Germany; and Dr. Schneider, Wieland-Edelmetalle, Pforzheim, West Germany |
| Electroforming with Electrolytic Ni-P and Co-P Alloys , - 1989, David Sugg, Techmetals, Inc., Dayton, OH |
| Improved Nickel Sulfamate for Enhanced Electroforms , - 1989, Howard M. Smith, Engineered Materials Div., Engelhard Corporation, Iselin, NJ |
| The Effects of Ammonia on the Ductility of Nickel deposited from Sulfamate Solutions , - 1989, Brad Clark, Allied-Kelite, New Hudson, MI |
| Iron-Nickel Electroforming for Controlled Thermal Expansion , - 1989, Darell Engelhaupt, Bell Aerospace, Buffalo, NY |
| A Discussion of Some Electroform Shielding and Bonding Techniques , - 1989, Glenn Malone, Electroformed Nickel, Inc., Corona, CA |
| Electroforming of Nickel Phosphorus at Low Phosphorus Content , - 1989, Si-Ty Lam, Hewlett Packard Laboratories, Palo Alto, CA |
| An Electroformed Nickel-Sulfur Alloy for a Nose Cone , - 1989, W.D. Bonivert, H.A. Johnsen and J.T. Hachman, Sandia National Laboratories, Livermore, CA |
| Pretreatment from a Wastewater Utility Perspective , - 1989, James Cowgill, Miami Dade Water & Sewer Authority Dept., Miami, FL |
| Federal and Florida Environmental Regulations Pertaining to the Generators and Small Quantity Generators (SQG) of Hazardous Wastes , - 1989, Michael Sisler, Florida Department of Environmental Regulation, West Palm Beach,FL |
| Hazardous Waste Reduction Initiatives in Rhode Island , - 1989, Victor Bell and Richard Enander, Department of Environmental Management, Office of Environmental Coordination, Providence, RI |
| Environmental Compliance for Industry; The Role of the Consulting Engineer , - 1989, Robert Ferrari, Ferrari Engineering, Inc., Providence, RI |
| Proactive Management: Strategies to Minimize the Risk of Civil and Criminal Enforcement of Environmental Laws , - 1989, William Pence, Esq., Smith & Schnacke, Orlando, FL |
| Water-Quality-Based Permitting Strategies in Connecticut , - 1989, James DeWitt, Connecticut Resource Group, Inc., Hartford, CT, and Dr. Jan Dunn, Environmental Monitoring Laboratory, Inc., Hartford, CT |
| Implementation of Toxicity Regulations in the State of Connecticut and the Effect Upon Metal Finishing Discharges , - 1989, Dr. Michael Curtis, P.E., Fuss and O'Neill, Inc., Manchester, CT |
| BioAssay Toxicity Compliance by Microfiltration Membrane Process , - 1989, Kevin Goyette, Litton, Winchester Electronics, Watertown, CT |
| BioAssay Toxicity Testing: One Plant's Experience , - 1989, David Hemmelgarn, CEF, and Lisa Gullett, CEF, Sheller-Globe Corp., Union City, IN |
| Effluent Toxicity Reduction Issues Strategies for Metal Finishers , - 1989, Roger Dhonau, Scott Kingston and John Malinowski, Lancy International, Inc., Warrendale, PA |
| The Need for Analytical Quality Control to Meet Effluent Permit Regulations in the Metal Finishing Industry , - 1989, Jeffrey Glass, Enviropact, Inc., Miami, FL |
| F006 Solidification Study , - 1989, Kelly Flannery, Fix-Sorb Products, Inc., Cincinnati, OH |
| Recycle Options for the F006 C.T. , - 1989, Phillipp, P.E.,Enviroscience, Inc., Hot Springs, AR |
| Hydro-Metallurgical Treatment of F006 Sludges , - 1989, S. Wayne Rosenbaum and Harold Rajevic, Recontek, Resource Conservation Technology, San Diego, CA |
| Recycling and Treatment of Metal-Bearing Spent Acid , - 1989, Evan Jones and Terri Stewart, Pacific Northwest Laboratory, Richland, WA |
| Replacing CFC-113 Solvents in the Electroplating Industry, - 1989, Kevin Murphy, Allied-Signal, Inc., Morristown, NJ |
| Prolonging Life of Electroless Nickel Plating Baths by Orthophosphate Removal , - 1989, John Richmond, Ontario Waste Management, Toronto, Ontario, Canada |
| Fluoride-Resistant, Titania-Ceramic Electrode for Metal Recovery and Pollution Control , - 1989, Steven Harnsberger and Iren Romoda, Ebonex Technologies, Inc., Emeryville, CA |
| Overview of the Air Force Engineering and Services Hazardous Waste Minimization Management Program , - 1989, Charles Carpenter, P.E., Environmental Engineering, Tyndall AFB, FL |
| Performance Evaluation of Noncyanide Metal Strippers , - 1989, S.K. Janikowski, EG&G Idaho, Columbus, OH |
| Electroplating: Evolution of Scrubber Technology , - 1989, George Pedersen, P.E., Kimre, Inc., Perrine, FL |
| Optimized Wastewater Treatment for a PCB Facility , - 1989, Larry Stuart, Post, Buckley, Schuh & Jernigan, Nashville, IN |
| Circuit Board Manufacturer's Wastewater Treatment System: A Semi-Closed Case Study , - 1989, Robert Lee, CEF, Rogers Corporation, Rogers, CT |
| Spill Prevention and Emergency Response , - 1989, Nicholas Mucci, Clean Harbors Environmental Services Companies, Braintree, MA |
| Applying Microcomputers to the Analysis of Waste Treatment and Recovery Processes , - 1989, Dr. Clifford Walton, P.E., CEF, and Gregg Poppe, Dept. of Chemical Engineering, University of Nebraska, Lincoln, NE |
| Renewable Coatings - The Recoating Payback, Jun - 1989, Jim Doughty |
| Physical Vapor Deposition of Thin Films, - 1989, Dr. Philip C. Johnson |
| Chemical Vapor Deposition of Metals for VLSI Applications, - 1989, Martin L. Green, AT&T Bell Labs, Inc., Murray Hill, NJ |
| Plasma Enhanced Chemical Vapor Deposition of Titanium Compounds, - 1989, Larry M. Williams, AT&T Bell Laboratories, Murray Hill, NJ |
| Applications of Sputtering and Plasma Etching Equipment in the Production of High Density Circuitry , - 1989, Jay Schumacher, Action Technologies, Inc., Boulder, CO |
| Productivity CVD and PVD Coatings for the Metal Working Industry , - 1989, Al Clavel, TI-Coating, Inc., Mt. Clemens, MI |
| Rapid Non-Mechanical, Damage-Free Figuring (Shaping) of Optical Surfaces Using Plasma Assisted Chemical Etching , - 1989, C.B. Zarowin, L.D. Bollinger, Perkin-Elmer Corporation, Danbury, CT |
| A Review of Vacuum Processes for Optical Coatings , - 1989, Mark H. Imus, Optical Coating Laboratory, Inc., Santa Rosa, CA |
| Nickel Electroplating Technology and Applications , - 1989, George A. DiBari and Roger Covert, INCO Limited, Saddlebrook, NJ |
| Analysis of Nickel Plating Solutions , - 1989, William G. Ward, Electrochemicals, Inc., Youngstown, OH |
| Troubleshooting Bright Nickel Plating Line Installations the Practical Way , - 1989, William J. Saas, TASKEM, Inc., Cleveland, OH |
| Decorative Nickel Chromium Plating on Stainless Steel , - 1989, Robert A. Tremmel, OMI International Corporation, Udylite Division, Warren, MI |
| Successful Applications of Functional Nickel Plating , - 1989, Ron Parkinson, Falconbridge Limited, Toronto, Ontario, Canada |
| A New Insoluble Nickel Plating Anode for Use with Recovery Systems , - 1989, Craig J. Brown, Eco-Tec, Inc., Pickering, Ontario, Canada |
| Practical Application of Principles Governing the Iron Phosphate Process, - 1989, R.W. Phillips III, Chemical Way's Corporation, Lake Bluff, IL |
| Conversion Coating of Metal Prior to Paint , - 1989, Dr. Gary D. Kent, Parker+Amchem, Madison Heights, MI |
| No-Dump Final Chrome Rinse for Pre-Paint Treatment and Counterflow Spray Rinsing , - 1989, R. W. Phillips Jr., Oakite Products, Inc., Berkeley Heights, NJ |
| Surface Preparation Machines , - 1989, Gregg Bailey, George Koch Sons, Inc., Evansville, IN |
| Computerized Control of Surface Finishing Processes--A Perspective J, - 1989, ohn Donaldson, CEF, Metal Surfaces, Tustin, CA |
| Strategies for Computerization of Finishing Systems , - 1989, Phillip D. Stapleton, Stapleton Technologies, Long Beach, CA |
| An Expert System for Surface Finishing Operations; The "Whats, Whys and Wheres?" , - 1989, Steven R. Schachameyer, Jerry Wooten, Chris Monaco, Cecilia Borden, and Emily Porter, Eaton Corporation, Milwaukee, WI |
| Use of On-Line Chemical Instruments to Replace Grab Sample Analysis, - 1989, Ronald Perreault, Tytronics Incorporated, Waltham, MA |
| Control System Options for Automation of Metal Finishing Lines , - 1989, Gene Kaplan, Advanced Industrial Systems, Inc., Irvine, CA |
| A New Corrosion-Resistant Surface Treatment for Magnesium Alloys , - 1989, Masato Mino and Goro Yamauchi, NTT Applied Electronics Laboratories, Tokyo, Japan |
| Influence of Impurities on Sealing Bath and Bath Stability of Cold Sealing Method for Aluminum Anodized Film , - 1989, Hidetoshi Takaichi, Okuno Chemical Industries Co., Ltd., Osaka, Japan |
| Dependence of Numerical Values of Throwing Power on the Geometric Dimensions of the Haring Cell , - 1989, Yu Zuzhan and Wu Beiming, Department of Chemistry, Fudan University, Shanghai, Peoples Republic of China |
| Polishing & Buffing: The Finishing of Light Metals , - 1989, Paul Schaffner, Schaffner Manufacturing Company, Inc., Pittsburgh, PA |
| AESF Project 72--Experiments on Electrodeposition of InP and InAs from Non-Aqueous Solutions , - 1989, G. Rauscher, Forschungsinstitut fur Edelmetalle und Metallchemie, Schwäbisch Gmünd, F.R. Germany |
| AESF Project 69--Effects of Substrate Attachment on Mechanical Properties of Electrodeposits , - 1989, Peter Vatakhov and Dr. Rolf Weil, Stevens Institute of Technology, Department of Materials & Metallurgical Engineering, Hoboken, NJ |
| AESF Project 74--Effect of Surface Crystallography on Adsorption of Organic Additives at Gold Electrodes , - 1989, A. Iannelli, J. Richer, L. Stolberg and J. Lipkowski, University of Guelph, College of Physical Science, Department of Chemistry & Biochemistry, Guelph, Ontario, Canada |
| AESF Project 70--Evaluation of Polarization Effects of Anion Surfactant and Brightener Combinations in Acid Zinc Plating , - 1989, Y.S. Park, J.S. Cuzmar, J.H. Lee and T.J. O'Keefe, University of Missouri, Rolla, Rolla, MO |
| AESF Project 73 Chemical Ion Sensors for Plating Solutions , - 1989, Robert F. Savinell, Tianying-Mi, Chi-Jin Chen and Chung-Chiun Liu, Department of Chemical Engineering, Case Western Reserve University, Cleveland, OH |
| AESF Project 67--Origin of Twins in Electrodeposits, - 1989, Lucille A. Giannuzzi, Howard W. Pickering and Dr. William R. Bitler, Penn State University, University Park, PA |
| Application of Linear Programming to the Chemical Control of Plating Baths , - 1989, M.R. Keenan, Sandia National Laboratories, Albuquerque, NM |
| A Computer Control System for Continuous Strip Plating , - 1989, Dennis R. Turner, Consultant, Chatham, NJ, |
| Computer-Integrated Manufacturing in a Multilayer Printed Circuit Facility , - 1989, Dr. Tim W. Rodgers, CEF, Hewlett-Packard Company, Burlingame, CA |
| Electroplating on Cuprate-Based Superconductors J.M. , - 1989, Rosamilia and B. Miller, AT&T Bell Laboratories, Murray Hill, NJ, and H.D. Rubin, AT&T Bell Laboratories, Princeton, NJ |
| Statistical Analysis and Predicting Service Life of Nickel Plated Steels , - 1989, Sermkiat Jomjunyong, Minoru Fujita, Shinichiro Yokoyama and Shigeomi Matsumoto, Department of Mechanical Engineering, Musashi Institute of Technology, Tokyo, Japan |
| Comparison of Wear Characteristics of Ni-Al2O3 Composite and Deposited Nickel Metal , - 1989, Chi-Wang Cheng, Chi-Cheng Chang and Shaw-Rong Lai, Chung Shan Institute of Science and Technology, Lung-Tan, Taiwan, Republic of China, and Tien-Sheuy Lee, Scientific Resources, Inc., Palatine, IL |
| Comparison Study of Throwing Power and Efficiency of Selected Non- Cyanide Zinc Electroplating Systems , - 1989, Vijay Kansupada, Pavco, Inc., Cleveland, OH |
| Hard Chrome Plating from a Dilute Bath , - 1989, Dr. John Dash and D. Reeves, Electrochemical Innovations, Inc., Portland, OR |
| Platers Must Compete on the Basis of Continuous Improvement , - 1989, Dr. Paul Piplani, Plymouth Plating Works, Inc., Plymouth, MI |
| Alternatives to Formaldehyde in Electroless Copper Plating , - 1989, Oscar E. Roberto, OMI International Corporation, Warren, MI |
| Surface Condition and its Role in Successful Pretreatment of Various Substrates for EN Plating , - 1989, Matthew J. Sisti, Fidelity Chemical Products Corp., Newark, NJ |
| Electroless Nickel Plating at Low Nickel Ion Concentrations , - 1989, Glenn O. Mallory, Electroless Technologies Corporation, Los Angeles, CA |
| The Influence of Phosphorus on the Thermal Stability and Corrosion Resistance of Electroless Ni-P-Cu Deposits , - 1989, Dr. Saad K. Doss and B. Dawson, IBM General Products Division, San Jose, CA, and K. Kanazawa, IBM Almaden Research Laboratory, San Jose, CA |
| New Process for Direct Through-Hole Electroplating of Printed Circuit Boards , - 1989, W. Metzger, Dr. J. Hupe and W. Kronenberg, Blasberg Oberflachentechnik GmbH, West Germany |
| The Throwing Power Improvement of Acidic Copper Electroplating by Ultrasonic Agitation , - 1989, M.C. Hsiao and Chi-Chao Wan, National Tsing Hua University, College of Engineering, Hsinchu, Taiwan, Republic of China |
| Anode Reactions and Metals Recycling by Electrolysis: Complementary Processes in Waste Management , - 1989, J-P Wiaux and T. Nguyen, Titalyse S.A., Geneva, Switzerland |
| How to Improve the Corrosion Resistance of Electroless Nickel-Phosphorus Coatings , - 1989, Heinz G. Schenzel and Heinrich Kreye, Universit„t der Bundeswehr, Hamburg, F. R. Germany |
| Improved Process Control in Electroless Nickel Plating, - 1989, Chris Castner, Walchem, Holliston, MA |
| Growth Processes in Electroless Deposition of Ni-P on Different Substrates , - 1989, A. Szasz and J. Kojnok, Laboratory for Surface and Interface Physics, Eotvos University, Hungary, and D.J. Fabian, SCOTSMAC, Department of Physics, University of Strathclyde, Glasgow, Scotland |
| City of Cleveland Ordinance Concerning Hard Chrome Plating Process Emissions Control , - 1989, Thomas J. Walsh, Division of Air Pollution Control, City of Cleveland, Cleveland, OH |
| At Issue: Local Pretreatment Limits, - 1989, James F. Weber and Larry Adloff, Industrial Waste Section, Northeast Ohio Regional Sewer District, Cleveland, OH |
| The Simultaneous Removal of Oil and Heavy Metals from Industrial Wastewaters Using Metal Hydroxides or Metal Sulfide Precipitation Coupled with Air Flotation , - 1989, Robert W. Peters and Gary F. Bennett, Argonne National Laboratory, Argonne, IL |
| Oil and Grease Removal from Concentrated Sources in the Metal Finishing Industry , - 1989, Mark A. Westra and Bryan L. Rose, P.E., Fishbeck, Thompson, Carr & Huber, Ada, MI |
| Recent Improvements in On-Line Metal Monitoring and the Automation of Waste Treatment Systems , - 1989, [no author] |
| Reaching Waste Minimization Goals Through Innovative Uses of Softened Water , - 1989, Lyle Kirman, Kinetico Incorporated, Engineering Systems Division, Newbury, OH |
| A Non-Toxic Precipitating Agent for Removing Heavy Metals from Wastewaters , - 1989, Philip A. Ruggiero and Detlef Maennig, Degussa Corporation, Allendale, NJ |
| Stabilization of F006 Wastes , - 1989, Richard F. Gold, Chemical Waste Management, Inc., Oak Brook, IL |
| Solids Detoxification--Beating the Land Ban , - 1989, C. Tom Philipp, Enviroscience, Inc., Hot Springs, AR, and W. Rostoker and J. Dvorscek, Rostoker, Inc., Burnham, IL |
| Sludgeless Metal Recovery for Metal Finishing , - 1989, Patrick M. Nelis, J. Michael Hosea and Alice M. Gabel, Bio- Recovery Systems, Inc., Las Cruces, NM |
| Zinc Cyanide Plating Rinse Reclamation--A Case Study of Advanced Reverse Osmosis Compared With Centralized Ion Exchange , - 1989, Ron Rich, CEF, and Thomas von Kuster, MBA, Water Technologies, Inc., Minneapolis, MN |
| New Problems Solved by "Mature" Equipment , - 1989, Richard W. Crain and Paul Eggerstedt, Industrial Filter & Pump Mfg. Co., Cicero, IL |
| The Determination of Plating Bath Additives Using HPLC and Electrochemical Techniques , - 1989, Andrew Palus, EG&G Princeton Applied Research, Princeton, NJ |
| On-line Measurement and Control of Organic Additives in Acid Copper Baths Using Liquid Chromatography , - 1989, Shawn Heberling, Dan Campbell and Steve Carson, Dionex Corporation, Sunnyvale, CA |
| Liquid Chromatography Methods for Monitoring of Plating Baths Used in Manufacturing of PC Boards , - 1989, Petr Jandik, W.R. Jones, W.J. Wildman, J. Krol and A.L. Heckenberg, Millipore Corporation, Milford, MA |
| Chromatographic Studies and Monitoring of Acid Copper Brighteners , - 1989, Susan A. Edwards and Jonathan Reid, IBM Corporation, Endicott, NY |
| PC-Based X-ray Micro-Fluorescence Analyzer for Plating Thickness and Composition Analysis , - 1989, William Silverman, Veeco Instruments, Inc., Syosset, NY |
| ELECTROPLATING RINSEWATER EFFLUENT, - 1989, DETERMINATION OF FEASIBLE OPERATING CONDITIONS FOR METAL RECOVERY FROM |
| CORROSION MONITORING OF PAINTED AUTOBODY TEST PANELS BY ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY , Feb - 1989, WANG, YAR-MING; RADOVIC, DUSANKA. |
| COMPARISON OF SOME MECHANICAL AND CORROSION PROPERTIES OF ELECTROLESS AND ELECTROPLATED NICKEL-PHOSPHORUS ALLOYS, - 1989, WEIL, R; LEE, J.H.; KIM, I.; PARKER, K. |
| BATTLING FASTENER CORROSION WITH ORGANIC COATINGS. , Mar - 1989, WILLIAMS, CHARLES R. |
| AEROSPACE SURFACE FINISHERS QUALIFICATION SYSTEM , - 1989, YOUSRI, SID |
| COMPLYING WITH AIR QUALITY STANDARDS WITH NEW TRIVALENT CHROMIUM PLATING TECHNOLOGY , - 1989, ZAKI, NABIL |
| The Effect of Ultrasonic Agitation On Copper Plating in an Acid Bath, Mar - 1989, M.C. Hsiao and C.C. Wan |
| Catalytic Anodes for High-Speed Electroplating and Electrogalvanizing, Apr - 1989, K.L. Hardee, L.K. Mitchell and E.J. Rudd |
| Determination by Ion Chromatography Of Ethylene Glycol Degradation Products In Chromium Plating and Electropolishing Baths, May - 1989, Sam Sopok |
| Pulsed Current Electroplating Of Silver-Gallium Alloy, May - 1989, W. Reksc, K. Jurewicz and E. Frackowiak |
| Pulse Plating of Silver-Palladium Alloys, Jul - 1989, Dong Shou-Jiang, Y. Fukumoto and T. Hayashi |
| Alternatives to Organic Solvents in Metal-Cleaning Operations, - 1989, Mehta, Suresh Sam |
| Waste Minimization in Metal Parts Cleaning aka Waste Minimization in Metals Parts Cleaning, - 1989, US Environmental Protection Agency, Office of Solid Waste and Emergency Response |
| Electroplating, - 1989, National Occupational Health and Safety Commission |
| An Electrochemical Mystery Story:
A Scientific Approach to Chromium Plating -- The 30 th William Blum Lecture, Jun - 1989, James P. Hoare |
| The 30th William Blum Lecture, An Electrochemical Mystery Story: A Scientific Approach to Chromium Plating, - 1989, Dr. James P. Hoare |
| Rack And Anode Effects On The Distribution Of Functional Chromium Electrodeposits, Jan - 1989, KNILL, E. |
| Improving the Operation of Cyanide Destruct Systems, Apr - 1988, Frank Altmayer |
| Finisher's Think Tank, Dec - 1988, Ronald Kornosky |
| Finisher's Think Tank, Dec - 1988, Ronald Kornosky |
| Finisher's Think Tank, Dec - 1988, Ronald Kornosky |
| Finisher's Think Tank, Dec - 1988, Ronald Kornosky |
| Do-It-Yourself Sampling, Part IV, Dec - 1988, Frank Altmayer |
| Do-It-Yourself Sampling, Part IV, Oct - 1988, Frank Altmayer |
| Do-It-Yourself Sampling, Part IV, Sep - 1988, Frank Altmayer |
| It Doesn't Have to Be a Grind, Sep - 1988, W.H. Safraneck |
| Troubleshooting Modern Bright Nickel Plating Solutions, Aug - 1988, Thomas J. Pullizi |
| Fill'em Up, Sep - 1988, W.H. Safraneck |
| Finisher's Think Tank, Sep - 1988, Ronald Kornosky |
| Finisher's Think Tank, Sep - 1988, Ronald Kornosky |
| Finisher's Think Tank, Sep - 1988, Ronald Kornosky |
| Finisher's Think Tank, Sep - 1988, Ronald Kornosky |
| Finisher's Think Tank, Sep - 1988, Ronald Kornosky |
| Finisher's Think Tank, Sep - 1988, Ronald Kornosky |
| Production Guide for Heavy Zinc Phosphating Practical Suggestions for Practical People Who Phosphate, Jul - 1988, Stanley Scislowski |
| Recognizing and Dealing with General Anodizing Problems, Jul - 1988, Richard Mahn |
| Finisher's Think Tank, Jul - 1988, Ronald Kornosky |
| Finisher's Think Tank, Jul - 1988, Ronald Kornosky |
| Anodizing Hot Line, Jun - 1988, Mel Faul |
| Anodizing Hot Line, Jun - 1988, Mel Faul |
| Anodizing Hot Line, Jun - 1988, Mel Faul |
| Anodizing Hot Line, Jun - 1988, Mel Faul |
| Anodizing Hot Line, Jun - 1988, Mel Faul |
| Anodizing Hot Line, Jun - 1988, Mel Faul |
| Waste-Treatment Tricks of the Trade, Apr - 1988, Frank Altmayer |
| Part 2: Cyanide By Any Other Name , Mar - 1988, Frank Altmayer |
| Part 1: Cyanide By Any Other Name, Feb - 1988, Frank Altmayer |
| Electroplating Case-Hardened Steel, Jan - 1988, Frank Altmayer |
| DEVELOPMENTS IN THE COLORING OF ANODIZED ALUMINUM , - 1988, TSCHEULIN, G. |
| THE POWER AND FREE CONVEYOR AND ITS POTENTIAL FOR PRODUCTIVITY IMPROVEMENT , - 1988, TYLMAN, T.A. |
| THE VOLTAMMETRIC DETERMINATION OF SULFURIC ACID IN A CHROMIUM PLATING BATH PLAT. , Nov - 1988, ULLRICH, L.W. |
| ELECTROFORMING NICKEL WITH DYNAMIC STRESS CONTROL , Mar - 1988, VAALER, L.E., GALLIHER, R.D., BROWN, R.G., RIDER, D.G. |
| INCREASING THE CRACK RESISTANCE OF POROUS ANODIC OXIDE FILMS ON ALUMINUM, - 1988, VENTURA, X.A. |
| SELECTIVE PULSE PLATING FROM AN ACID COPPER SULFATE BATH , Jan - 1988, VILAMBI, N.R.K., CHIN., D-T. |
| EFFECTIVENESS OF ELECTRODEPOSITED COATINGS IN REDUCING ATMOSPHERIC CORROSION OF COPPER SUBSTRATES , - 1988, VOYTKO, J.E., GUILINGER, T.R. |
| CORROSION MONITORING OF PAINTED AUTOBODY TEST PANELS BY ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) MEASUREMENT , - 1988, WANG, Y-M, RADOVIC, D. |
| ANALYSIS OF BRIGHT ACID TIN ADDITIVES BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY , - 1988, WARD, W., JOHNSON, A., MORSE, S., WINTERROWD, E. |
| A SORPTION FILTER HELPS MANUFACTURERS MEET STRICT EFFLUENT LIMITS , - 1988, WARHEIT, K.E. |
| THE EFFECT OF ADDITIVES ON THE STRUCTURE AND DIFFERENTIAL DOUBLE-LAYER CAPACITANCE OF ELECTROPLATED COPPER AESF RESEARCH PROJECT 62 , Nov - 1988, WEIL, ROLF; CHANG, JEI-WEI |
| THE 28TH WILLIAM BLUM LECTURE--ANODIZING OF ALUMINUM: THE SEALING PROBLEM , - 1988, WERNICK, S. |
| INFLUENCE OF PULSE PLATING ON SURFACE DISTRIBUTION AND METALLURGY OF COPPER DEPOSITS , May - 1988, WHITE, J.R., GALASCO, R.T. |
| THROWING POWER EFFECTS IN PERMALLOY ELECTROPLATING , Apr - 1988, WHITE, R.L. |
| SPECTROPHOTOMETRIC DETERMINATION OF PLATINUM, PALLADIUM, RHODIUM AND COPPER USING N, N'-DIMETHYLDITHIOOXAMIDE , - 1988, WIESE, P. |
| SOURCE REDUCTION OF CHLORINATED SOLVENTS - AEROSPACE APPLICATIONS , - 1988, WOLF, K. |
| APPLICATION OF ELECTROLESS NICKEL PLATING IN THE SEMICONDUCTOR MICROCIRCUIT INDUSTRY: , Jul - 1988, WONG, K., CHI, K., RANGAPPAN, A. |
| WASTE CONTROL AND MINIMIZATION: A COOPERATIVE EFFORT: , - 1988, WULFF, K.L. |
| CORROSION OF ELECTROLESS Ni-P-Cu ALLOY IN AN ATMOSPHERIC GAS CHAMBER , Dec - 1988, YANG, E.; DOSS, S.K.; PETERSON, P. |
| ELECTROLESS NICKEL PHOSPHORUS COPPER STUDY IN CORROSIVE ATMOPHERIC CHAMBER , - 1988, YANG, E., DOSS, S.K. |
| AN ELECTROCHEMICAL METHOD TO CONTROL THE ANODIZING PROCESS , - 1988, YOUSRI, S. |
| THE WEAR CHARACTERISTIC OF Ni-P-SiC COMPOSITED COATING , - 1988, ZONGGANG, D., XINMIN, H. |
| WET CHEMICAL PLATING ANALYSIS—, - 1988, ZUEHLKE, R.W. |
| Laser-Induced Selective Deposition on Metal Using Electroless Gold, Aug - 1988, HR. Khan, M.U. Kittel and Ch.J. Raub |
| Morphology of High Rate Electrozinc, Sep - 1988, T.R. Roberts, F.H. Guzzetta and R.Y. Lin |
| Analysis Methods for Zinc Plating Brighteners, Nov - 1988, David Crotty and Kenneth Bagnall |
| Electroless Copper Deposition With Hypophosphite as Reducing Agent, Jan - 1988, Aina Hung |
| Preferred Orientation and Morphology Of Pulse-Plated Copper and Cobalt, Apr - 1988, P.L. Cavallotti, D. Colombo, E. Galbiati, A. Piotti and F. Kruger |
| Morphology and Permeability of Nickel Electrodeposits, Aug - 1988, Wolfgang Paatsch |
| Clinical Applications of Electroformed Gold Alloy, Mar - 1988, Gerald A. Somers Jacques Blauis |
| Finishers' Think Tank, Feb - 1988, Ronald Kornosky |
| Kinetics of Electroless Copper Deposition With Hypophosphite as a Reducing Agent, Apr - 1988, Aina Hung |
| Hazardous Waste Reduction in Metal Parts Cleaning, - 1988, Kohl, Jerry |
| Technology Assessment of Selected Hazardous Waste Minimization Process Changes, - 1988, Carpenter, Charles J. |
| Preparation and Optimization of Pyrophosphate Bath for Copper Electroplating of Microwave Components, - 1988, L.G. Bhatgadde and S. Mahapatra |
| Preparation and Optimization of Pyrophosphate Bath for Copper Electroplating of Microwave Components, - 1988, L.G. Bhatgadde and S. Mahapatra (Indian Institute of Technology) |
| The Tribology of Contact Finishes for Electronic Connectors -- The 29 th William Blum Lecture, Jun - 1988, Dr. Morton Antler |
| The 28th William Blum Lecture, Anodizing of Aluminum: The Sealing Problem, - 1988, Dr. Simon Wernick |
| The 29th William Blum Lecture, The Tribology of Contact Finishes for Electronic Connectors, - 1988, Dr. Morton Antler |
| A REVOLUTION IN POWDER COATING TECHNOLOGY: THE FIVE-MINUTE CHANGE IS HERE , - 1987, TYLER, D.S. |
| HIGH-SPEED CHROMIUM PLATING USING ENHANCED MASS TRANSFER , Aug - 1987, VAALER, L.E., EL-SHAZLY, M.F., BROOMAN, E.W. |
| ANODIZING SAILBOAT MASTS , Jun - 1987, VAUGHT, M. |
| FFECTS OF GLYCINE AND THIOUREA AS BRIGHTENERS IN AN ACID ZINC SULFATE BATH, Jun - 1987, VENKATESHA, T.V., BALACHANDRA, J., MAYANNA, S.M., DAMBAL, R.P. E |
| ALUMINUM PLATING USING PULSED CURRENT IN INDUSTRIAL CELLS , - 1987, VENTURA, X.A. |
| AESF RESEARCH PROJECT 68 SELECTIVE PULSE PLATING , - 1987, VILAMBI, N.R.K; CHIN, D-T. |
| TRENDS IN VACUUM DEPOSITION , Dec - 1987, VOSSEN, J.L. |
| COPPER ANODE AREA FOR TODAY'S HIGH-SPEED PLATING , - 1987, WALKER, C.T. |
| THE EFFECT OF WATER ON THE ADHESION OF ORGANIC COATINGS AND ITS MITIGATION BY SURFACE TREATMENTS , - 1987, WALKER, P. |
| PASSIVATION AND CORROSION RESISTANCE OF TIN-ZINC ALLOY ELECTRODEPOSITS ON STEEL , Dec - 1987, WARWICK, M.E., DAVIS, P.E. |
| PREPARATION AND MAGNETIC PROPERTIES OF COBALT-GADOLINIUM AMORPHOUS ALLOY FILMS BY AN ELECTROPLATING METHOD , - 1987, WATANABE, T.; USUZAKA, N.; YAMAGUCHI, H. |
| STRUCTURE AND PROPERTIES OF ELECTRODEPOSITS , Dec - 1987, WEIL, R. |
| NEW DEVELOPMENTS IN MECHANICAL PLATING AND GALVANIZING , - 1987, WHITMORE, B. DR. |
| ORGANIC FINISHING OF FASTENERS , - 1987, WILLIAMS, C.R. |
| Electroforming Printing Plates at the Bureau of Engraving and Printing , Jan - 1987, Williams, R.H. |
| ELECTROFORMING PRINTING PLATES AT THE BUREAU OF ENGRAVING AND PRINTING , Jan - 1987, WILLIAMS, R.H. |
| MACHINING EXPTOC ROUTED CIRCUIT MATERIALS: , - 1987, Wolley, M. J.;. |
| SPRAY DYEING OF ALUMINUM:HAS IT COME OF AGE?: , - 1987, WOODS, J.L.;. |
| HIGH-EFFICIENCY CHROMIUM BRUSH PLATING TECHNIQUE , - 1987, WU SHENG, BIN |
| OUTDOOR EXPOSURE AND ACCELERATED TESTS OF ELECTROLESS NICKEL , Aug - 1987, YAJIMA, S., TOGAWA, Y., MATTSUSHITA, S., KANBE, T. |
| NEW CORROSION-RESISTANT Mg ALLOY SURFACE TREATMENT , - 1987, YAMAUCHI, G.; MINO, M.; SEKI, E. SAKITA; ARITA, K. |
| HIGH-TEMPERATURE HYDROTHERMAL TREATMENT OF ANODIC COATINGS ON ALUMINUM , Jun - 1987, YOSHIMURA, C., NOGUCHI, H., DOI, M. |
| EVALUATION OF ALUMINUM ANODIZED COATINGS USING ELECTROCHEMICAL CORROSION TECHNIQUES , Nov - 1987, YOUSRI, S., TEMPEL, P. |
| LASER AND ELECTROCHEMICAL STUDIES OF PB-SN ELECTRODEPOSITS: , - 1987, ZAHAVI, J.; ROTEL, M.;. |
| Improving Your Chloride Zinc Plating Operation, Oct - 1987, Stephen Schneider |
| Improved Method of Removing and Reclaiming Solution in Barrel Plating, Nov - 1987, John E. Hunt |
| Pulse-Plated Nickel-Molybdenum Coatings, Oct - 1987, M. Cherkaoui, E. Chassaing and K. Vu Quang |
| Electrodeposition of Iron-Chromium-Nickel Alloy, Oct - 1987, M. Matsuoka, R. Kammel and U. Landau |
| Corrosion of Porous Gold Plating In Field and Laboratory Environments, Nov - 1987, W.H. Abbott |
| Electrodeposition of Zinc-Manganese on Steel Strip, Nov - 1987, M. Sagiyama, T. Urakawa, T.
Adaniya, T. Hara and Y. Fukuda |
| Structure and Properties of Electrodeposits, Dec - 1987, R Weil |
| Passivation and Corrosion Resistance Of Tin-Zinc Alloy Electrodeposits on Steel, Dec - 1987, M.E. Warwick and P.E. Davis, CEF |
| Acoustic Emission During Chromium Plating, - 1987, Todaro, M. E. and Capsimalis, G. P. and Chen, E. S. |
| Atmospheric Evaporative Recovery Applied to a Nickel Plating Operation, - 1987, Wells, Brian E. |
| Anodizing of Aluminum:
The Sealing Problem -- The 28 th William Blum Lecture, Jun - 1987, Dr. Simon Wernick |
| RECOVERY OF NICKEL SALTS BY AN ELECTRODIALYSIS REVERSAL PROCESS , - 1986, TRAN, TAM V.; CLEMENS, PAUL B. |
| The Role of Sensors in Automatic Electroplating , Jun - 1986, Turner, D.R. |
| SENSOR SYSTEMS IN AUTOMATIC ELECTROPLATING , - 1986, TURNER, DENNIS DR. |
| HIGH-SPEED CHROMIUM PLATING USING ENHANCED MASS TRANSFER , - 1986, VAALER, L.E.; SHAZLY, M.F.; BROOMAN, E.W. |
| Evaluation of Electrochemical Recovery of Cadmium at a Metal Finishing Plant , Apr - 1986, Vachon, D.T.; Bissett, W.; Calver, B.A.; Dickson, G.C. |
| Electrochemical Measurement of Surface Area , Dec - 1986, Van Vechten, T.C.; Lashmore, D.S.; Johnson, C.E.; Puippe, J-Cl. |
| STATUS OF CHROMIUM AIR EMISSIONS , - 1986, VERVAERT, A.E. |
| ASESSMENT OF CHROMIUM EMISSIONS FROM CHROMIUM ELECTROPLATING FACILITIES, - 1986, VERVAERT, ALFRED E.; DULETSKY, BARBARA W. PRELIMINARY |
| WASTE TREAT OR RECOVER? , - 1986, WERBICKI, JOSEPH J. |
| High-Current-Density Electroplating of Zinc-Nickel and Zinc-Iron Alloys , Jul - 1986, Weymeersch, A.; Renard, L.; Conreur, J.J. |
| THE HEAT CLEANING PROCESS , - 1986, WHELAN, KENT |
| MASS BALANCE CONTROL OF PROCESS CHEMICALS FOR PRINTED WIRING BOARD PRODUCTION:, - 1986, WHITNEY, LINNEA; WILLIAMS, RODNEY; HEIKKILA, KURT;. |
| EVALUATION OF OPERATION AND MAINTENANCE MODIFICATIONS TO REDUCE TTO FROM METAL FINISHING OPERATIONS, - 1986, WOLBACH, D.; BUCHAN, W. |
| SEALING OF ANODIZED ALUMINUM: HOT, LUKEWARM AND COLD: , - 1986, YAFFE, BENJAMIN;. |
| Atmospheric Evaporators , Apr - 1986, Yates, B. |
| ADVANCES IN DECORATIVE TRIVALENT CHROME PLATING , - 1986, ZAKI, NABIL |
| Corrosion Resistance Evaluation of Chromated Electrogalvanized Steel Using AC Impedance Techniques , Feb - 1986, Zeller, R.L., III; Savinell, R.F. |
| The Plating Solution and the Human Body:
Complex Electrochemical Systems -- The 27 th William Blum Lecture, Jun - 1986, John W. “Jack” Dini |
| The 27th William Blum Lecture, The Plating Solution and the Human Body: Complex Electrochemical Systems, - 1986, Jack Dini |
| NEW ALKALINE COPPER PROCESS: A NOVEL ALTERNATIVE TO CYANIDE COPPER , - 1985, TOMASZEWSKI, L.C.; TREMMEL, ROBERT A. |
| STATISTICAL PROCESS CONTROL FOR PLATERS , - 1985, TREMMEL, PETER H. |
| ELECTRICAL/ELECTRONIC ASPECTS OF STRIP AND EDGE BOARD PLATING MACHINES , - 1985, TURNER, DENNIS R. |
| The Efficiency of Ultrasonic Cleaning , Jan - 1985, Walker, R. |
| Electrodeposition of Nickel-Iron Alloys With Ultrasound , Apr - 1985, Walker, R.; Halagan, S.A. |
| PROCESS CONTROL IMPROVEMENTS IN THE PLATED PART: , - 1985, WIEDMAYER, L.;. |
| QUALIFICATIONS OF PALLADIUM-NICKEL DEPOSITS ON EUROPEAN CONNECTORS , - 1985, WILKINSON, P.; BLAIR, ALAN; ROBERTO, D. |
| Evaporative Recovery for Cadmium Cyanide Plating , Nov - 1985, Williamson, R.G.; Natof, S. |
| RELIABLE FABRICATION OF HIGH-QUALITY PRINTED WIRING BOARDS, - 1985, WOPSCHALL, ROBERT H. |
| TWO-STEP ELECTROLYTIC COLORING SPECIFICATIONS: , - 1985, YAFFE, BEN;. |
| RECYCLING IN THE JAPANESE ELECTROPLATING INDUSTRY , - 1985, YAGISHITA, AISABURO; FUKUTA, TADASHI; YAGISHITA, KAZUHIKO; YAMADA, TOSHIKATSU; ABE, HIROSHI |
| LASER-INDUCED DIRECT METAL DEPOSITION ON SEMICONDUCTOR AND POLYMERIC SUBSTRATES FROM ELECTROPLATING SOLUTIONS , - 1985, ZAHAVI, J. DR.; TAMIR, S. |
| RESIN-BONDED MEDIA IN MASS FINISHING APPLICATIONS FOR PLATING: , - 1985, ZAKI, NABIL;. |
| Migration of Hazardous Substances Through Soil. Part 2. Determination of the Leachability of Metals from Five Industrial Wastes and Their Movement within Soil, - 1985, Houle, M. J. and Long, D. E. and Bell, R. and Weatherhead, D. C., Jr. and Grabbe, R. |
| Surface-Enhanced Raman Spectroscopy as a Probe or Adsorbate-Surface Bonding: Benzene and Monosubstituted Benzenes Adsorbed at Gold Electrodes, - 1985, Gao, Ping and Weaver, Michael J. |
| Evaluation of New and Emerging Technologies in the Metal Finishing Industry, - 1985, Dietz, J.D. and C.M. Cherniak |
| Waste Reduction Fact Sheet - Water Conservation for Electroplaters: Rinse Water Reuse, - 1985, NC Division of Pollution Prevention and Environmental Assistance |
| Source Reduction Potential in the Electroplating Industry, - 1985, Jordan, Gregory R |
| Electroanalytical Methods
for Research and Development in Electroplating -- The 26 th William Blum Lecture, Jun - 1985, Dr. Yutaka Okinaka |
| The 26th William Blum Lecture, Electroanalytical Methods for Research and Development in Electroplating, - 1985, Dr. Yutaka Okin |
| PROPERTIES OF ELECTROLESS NICKEL/PTFE COMPOSITE COATINGS , - 1984, TULSI, S.S.; HADLEY, J.S. |
| An Electrochemical Cell for Cadmium Recovery and Recycling , Dec - 1984, Tyson, A.G. |
| The Use of Sputtered Titanium Nitride Layers in Electroforming , Jul - 1984, Van de Leest, R.E; Gijsbers, K; Havinga, S. |
| Seventy-Five Years of Copper Plating , Jun - 1984, Van Tilburg, G.C. |
| ROTATING ELECTRODES: A UNIVERSAL TOOL FOR THE CONTROL AND OPTIMIZATION OF PLATING BATHS , - 1984, VANHUMBEECK, J. DR. |
| The Hardness of Iron Electrodeposited With Ultrasound , Oct - 1984, Walker, R.; Perrins, C.J. |
| SLUDGELESS ELECTROLESS METAL RECOVERY , - 1984, WARHEIT, KEVIN E. |
| PLATING BY PULSE CURRENT , - 1984, XU, WEI-YUAN |
| Gold Plating: Early 1900s vs. the 1980s , Jun - 1984, Weisberg, A.M. |
| Aluminum Finishing: Past, Present and Future , Feb - 1984, Woods, J.E. |
| THE DO'S AND DON'TS OF PRACTICAL MASS FINISHING FOR OPTIMUM PRODUCTIVITY: , - 1984, ZAKI, NABIL. |
| A New Ion-Exchange Material for Metal Finishers, Apr - 1984, Zapisek, S. |
| DURABLE METAL TANKS FOR LARGE VOLUME ELECTROLESS DEPOSITION , - 1984, ZEBLISHY, RUDOLPH |
| A History of Zinc Plating , Jun - 1984, Zehnder, J.A. |
| Engineering Properties of Various Coatings -- The 25 th William Blum Lecture, Jun - 1984, Harold Weisner |
| The 25th William Blum Lecture, Engineering Properties of Various Coatings, - 1984, Dr. Harold J. Wiesner |
| TRIVALENT CHROMIUM:A COMMERCIALLY VIABLE ALTERNATIVE , - 1983, TOMASZEWSKI, T.W.; FISCHER, R.E. |
| Maximum Rate of the Cathodic Reaction in Electroless Copper Deposition , Apr - 1983, Vitkavage, D.; Paunovic, M. |
| VACUUM PROCESSES FOR HARD-SURFACE FILM DEPOSITION , - 1983, VOROUS, TED VAN |
| THE RECOVERY AND TREATMENT OF METALS FROM SPENT ELECTROLESS PROCESSING SOLUTIONS , - 1983, WARHEIT, KEVIN E. |
| GOLD DISTRIBUTION ON PRINTED CIRCUIT BOARD EDGE CONNECTORS , - 1983, WATSON, PAUL DR. |
| A STUDY OF PALLADIUM-NICKEL AS A REPLACEMENT FOR GOLD IN ELECTRICAL CONTACT APPLICATIONS , - 1983, WHITLAW, KEITH J. |
| CLEANING, DESCALING, PASSIVATION, AND INSPECTION OF STAINLESS STEELS , - 1983, WILBUR, LEE H. |
| Palladium-Nickel Plating , Nov - 1983, Wild, M.J.; Blair, A. |
| CHROMATE CONVERSION COATING PROCESSES OF THE CONVENTIONAL AND NON-CONVENTIONAL TYPES FOR NONFERROUS METALS , - 1983, WITTKE, W.J. |
| Electroless Copper Plating--Chemistry and Maintenance: , Jan - 1983, Wynschenk, J. |
| Electrodeposited Nickel Composites Containing Diamond Particles , Feb - 1983, Zahavi, J.; Hazan, J. |
| ANALYSIS OF ORGANIC COMPONENTS IN COPPER PLATING BATHS BY LIQUID CHROMATOGRAPHY , - 1983, ZATKO, DAVID A.; FREITAG WALTER O. |
| China Report, Science and Technology, No. 202., - 1983, Fan Zhenggang |
| Aluminum-Manganese Plating from a Molten Salt Bath, - 1983, Jankowsky, E. J. |
| Development of Improved LACV-30 Propeller Blade Coatings for Protection Against Sand and Rain Erosion and Marine Environment Corrosion, - 1983, Malone, Glenn A. |
| Looking Back -- The 24 th William Blum Lecture, Jun - 1983, Fred Pearlstein |
| The 24th William Blum Lecture, Looking Back, - 1983, Fred Pearlstein |
| APPLICATION OF BTL PD TECHNOLOGY TO BARREL PLATING , - 1982, TROP, H.S. |
| ELECTRODEPOSITION AND PASSIVATION OF BRIGHT ZINC-NICKEL ALLOYS , - 1982, TSUJI, H.; KAMITANI, M. |
| Improving the Lightfastness of Color Anodized Aluminum , Feb - 1982, Turski, Z. |
| Black Chemical Oxide Coatings for Aluminum , Jun - 1982, Tuttle Jr, J.N. |
| THE FKJA METHOD AND THE LAFT EQUIPMENT , - 1982, TUZNIK, FRANCISZEK |
| AUTOMATIC MONITORING OF THE CURRENT EFFICIENCY IN PLATING BATHS , - 1982, VANHUMBEECK, DR. JACKY; VANGAEVER, DR. FRANK; |
| AUTOMATIC ANALYZER FOR COPPER IN WASTEWATER FROM PLATING SHOPS , - 1982, VANHUMBEECK, J.B. DR. |
| ELECTROLESS COPPER DEPOSITION: LIMITING CONDITIONS AND ACCELERATING-INHIBITING EFFECTS , - 1982, VITKAVAGE, DANIEL; PAUNOVIC, MILAN |
| IS THERE A PLANAR MAGNETRON IN YOUR FUTURE? , - 1982, VOROUS, TED VAN |
| Ion Exchange for Recovery of Precious Metals , Apr - 1982, Waitz Jr., H.W. |
| Effects of Grain Refiners in Gold Deposits on Aluminum Wire-Bond Reliability , Aug - 1982, Wakabayashi, S.; Murata, A.; Wakabayashi, N. |
| COPPER PLATING VARIABLES AFFECTING MULTILAYER BOARD HOLE QUALITY , - 1982, WALTON, R.F.; DORFMAN, HERBERT |
| The Kinetics of PdCl2/SnCl2 Activating Solutions for Electroless Plating: , Aug - 1982, Wang, Y.H.; Wan, C.C. |
| Direct Plating of Aluminum , Feb - 1982, Wasserman, A. |
| HIGH THROW TIN-LEAD PLATING , - 1982, WATSON, A.A.; HAGUE, B.; CHESSIN, H. |
| MODERN APPROACH TO CLEANING ALUMINUM FOR ANODIZING , - 1982, WATSON, RICHARD; DAILEY, J.H. |
| Material Science of Electrodeposits , Dec - 1982, Weil, R. |
| Decorative Gold Plating, II--Gold Alloy Deposits , May - 1982, Weisberg, A.M.; Shoushanian, H. |
| Decorative Gold Plating, I--an Historical Perspective , Apr - 1982, Weisberg, A.M.; Shoushanian, H. |
| LOWER-COST "FLASH" GOLD DEPOSITS, - 1982, WEISBER, ALFRED M. |
| ENERGY SAVINGS IN EXHAUST VENTILATION SYSTEMS, - 1982, WELCH, PHILIP R. |
| ANALYSIS OF GOLD IN SOLUTION - THE ALTERNATIVES , - 1982, WERBICKI, J.J. |
| AN INTRODUCTION TO PROGRAMMED EXPERIMENTATION , - 1982, WERBICKI, JOSEPH J. |
| Controlling NOx Emissions From Aluminum Bright Dips , Oct - 1982, White, J.N. |
| DIRECT FILTRATION...THE THREE-FOR-ONE OPTION , - 1982, WHITE, JERRY; GREENBERG, LAWRENCE; CRAIN, RICHARD |
| Electrolytic Oxidation of Excess Cr exp 3+ From Black Chromium Plating Baths: , Sep - 1982, Whiteley Jr, R V ; Brown, N E. |
| Anodizing With a Dual-Purpose Electrolyte: Reynolds Metals Co. , Sep - 1982, Wilbur, L.H. |
| Heavy Metal Removal Using Dithiocarbamates , Jan - 1982, Wing, R.E.; Rayford, W.E. |
| PROPER PRETREATMENT FOR POWDER , - 1982, WITTKE, WILLIAM |
| A SURVEY ON INTEGRAL ANODIZING AND ELECTROLYTIC COLORING PROCESSES FOR ARCHITECTURAL AND DECORATIVE PURPOSES: , - 1982, WOODS, JACK L.;. |
| Advantages of Pulse Anodizing, Jul - 1982, Yokoyama, K.; Konno, H.; Takahashi, H; Nagayama, M. |
| Properties of Electrodeposited Composite Coatings , Jan - 1982, Zahavi, J.; Kerbel, H. |
| Control and Treatment Technology for the Metal Finishing Industry: In-Plant Changes, Jan - 1982, [no author] |
| Maintenance in Service of High Temperature Parts, - 1982, |
| Material Science of Electrodeposits ‐ The 23 th William Blum Lecture, Jun - 1982, Dr. Rolf Weil |
| The 23rd William Blum Lecture, Material Science of Electrodeposits, - 1982, Rolf Weil |
| A COMPARISON OF DC AND PULSE RECTIFICATION IN BARREL PLATING OF CONNECTORS, - 1981, TOWNE, DAVID |
| Decorative Nickel-Iron Coatings II--An Acceptable and Economic Alternative to Bright Nickel , Feb - 1981, 2726. Tremmel, R.A. |
| Electrodeposition of Zinc From a Zincate Bath With Ultrasound , Feb - 1981, Walker, R.; Holt, N.S. |
| Effect of Filler Size on the Adhesion of Electroless Copper to Polyvinyl Chloride , Aug - 1981, Wan, C-C ; Chen, J-S. |
| EFFECT OF FILLER SIZE ON THE ADHESION OF ELECTROLESS DEPOSITS TO PLASTICS, - 1981, WAN, DR. CHI-CHAO; CHEN, JEN SHIA |
| Electrodeposits From a Noncyanide Bath , Dec - 1981, Wang, S.-S.; Chai, J.-K.; Shui, Y.-M.; Liang, J.-K. Cd-Ti |
| ELECTRODEPOSITION MECHANISMS UNDER PRACTICAL PLATING CONDITIONS , - 1981, WEIL, ROLF DR. |
| Zinc Electrodeposition at High Current Densities, II -- Characteristics of Deposits , May - 1981, Weymeersch, A.; Winand, R.; Renard, L. |
| Zinc Electrodeposition at High Current Densities, I – , Apr - 1981, Weymeersch, A.; Winand, R.; Renard, L. |
| DECORATIVE BLACK NICKEL PLATING , - 1981, WIECZERNIAK, WALTER; TREMMEL, ROBERT |
| DESIGN AND CONSTRUCTION OF AN ANODIZING PLANT, - 1981, WILLIAMS, DOUGLAS |
| Wastewater Treatment of Acid Cadmium Rinses , Jan - 1981, Wing, R.E.; Doane, W.M. |
| COLORED ARCHITECTURAL AND PHOTOCHEMICALLY ETCHED PRODUCTS FROM ALUMINUM: , - 1981, WOODS, JACK, L.;. |
| Orientation and Microstructure of Dull Nickel Electrodeposits, Apr - 1981, Ye, G.C.; Lee, D.N. |
| ANODIC OXIDATION OF ALUMINUM UTILIZING CURRENT RECOVERY EFFECT , - 1981, YOKOYAMA, KAZUO; KONNO, HIDETAKA; TAKAHASHI, HIDEAKI; NAGAYAMA, MASAICHI |
| Microelectronic Component Lead Finishes, Sep - 1981, Zakraysek, L. |
| MODERN ELECTROLESS COPPER SYSTEMS WITH AUTOMATIC CONTROL, - 1981, ZEBLISKY, R. |
| APPLICATION OF COMPLIANCE COATINGS: A PRACTICAL GUIDE TO THE SELECTION OF BEST OPTIONS, - 1981, ZIEGWEID, JOSEPH E. |
| Report on the Results of the AES/EPA Sludge Characterization Project, Jun - 1981, Kenneth R. Coulter |
| Don't Believe Everything You Hear ‐ The 22th William Blum Lecture, Jun - 1981, Dr. Joseph Edwards |
| The 22nd William Blum Lecture, Don’t Believe Everything You Hear, - 1981, Dr. Joseph Edwards |
| ELECTROLYTIC STRIPPING--A NEW GENERATION OF METAL STRIPPING PROCESSES, - 1980, TOMASZEWSKI, L.C. |
| A REVIEW OF THE DEVELOPMENT AND PRODUCTION OF D.W.I. TINPLATE IN SOUTHERN AFRICA , - 1980, TROMANS, J.K.; VAN SCHOOR, R.A. |
| Stabilization of Black Chromate Conversion Coatings on Zinc , May - 1980, 2771. Van de Leest, R.E.; Wessels, J. |
| RELIABILITY STUDIES OF METALLIZATION PROCEDURES FOR KOVAR LEAD FRAMES , - 1980, VAUGHAN, JAMES G. |
| Painting Efficiency of Automatic Electrostatic Systems , Mar - 1980, Walberg, A.C. |
| The Role of Hydrosonic Agitation on the Electrodeposition of Zinc From a Zincate Bath , May - 1980, Walker, R.; Holt, N.S. |
| Chromium Plating From Dilute Electrolytes , Sept - 1980, Wallace Jr., A.J. |
| ADDITION AGENT FOR CONTINUOUS TIN PLATING OF WIRE AND STRIP IN FLUOROBORATE BATHS , - 1980, WASSERMAN, ARTHUR |
| THE CROSS-SECTIONAL STRUCTURES OF THICK ELECTRODEPOSITS AND THEIR RELATIONSHIP TO THEIR PROPERTIES (AES PROJECT 38A) , - 1980, WEIL, R.; CHOI, H.J. |
| AN ATOMIC ABSORPTION ANALYSIS TECHNIQUE FOR GOLD COMPARABLE TO FIRE ASSAY , - 1980, WERBICKI, J.J. |
| ONE-SIDE GALVANIZING AUTO-GALV , - 1980, WHITE, ALLEN W. |
| THE ION TRANSFER MEMBRANE--A NEW TECHNOLOGY FOR THE TREATMENT OF CHROMIUM PLATING WASTE AND RECOVERY OF CHROMIUM(VI) , - 1980, WHITSON, P.E.; RYDER, G.A. |
| PLATING ON DIFFICULT-TO-PLATE METALS: WHAT'S NEW? , - 1980, WIESNER, HAROLD J. |
| COMPARATIVE STUDY OF PEPTONE AND NON-PEPTONE MATTE SOLDER BATHS: , - 1980, WILLIS, W.J.;. |
| Characterization of a Mixed Acid Aluminum Etchant , Mar - 1980, Win, H.; Morin, T.J. |
| Adhesion of Sulfamate Nickel Electrodeposits on Aluminum-Zinc-Magnesium Alloys Anodized in Phosphoric Acid , Jan - 1980, Wittrock, H.J. |
| Low-Concentration Hexavalent Chromium Plating Baths:, Jul - 1980, Wu, S H L. |
| ELECTROLESS NICKEL PLATING ON SILICON , - 1980, YOSHIDA, KEI |
| Cyanide Waste Treatment Technology--the Old, the New and the Practical , Aug - 1980, Zabban, W.; Helwick, R. |
| CLOSED LOOP ELECTROLESS COPPER BATH OPERATON USING ION EXCHANGE , - 1980, ZEBLISHY, RUDOLPH |
| INFLATION: THE CHALLENGE TO GOLD'S ROLE AS AN INDUSTRIAL COMMODITY:, - 1980, ZIMMERMAN, THOMAS. |
| Opportunism! -- The 21 th William Blum Lecture, Jun - 1980, William H. Safranek |
| The 21st William Blum Lecture, Opportunism!, - 1980, William H. Safranek |
| A New Chemical Finishing Process for Aluminum , Jun - 1979, Tuttle Jr, J.N. |
| HIGH SPEED ELECTROLESS COPPER PLATING AT ROOM TEMPERATURE , - 1979, VAIDYA, N.; MCCORMACK, JOHN |
| ELECTROFORMING A MOLD FOR CASTING PLASTIC FRESNEL LENSES , - 1979, WALDROP, F.B.; WALDROP, R.C.; WASHINGTON, C.A.; PATTERSON, H.E. |
| SOLUTION DRAG-OUT AND RINSING AFTER CHROMIUM PLATING , Nov - 1979, WALLACE JR., A.J. |
| APPLICATION OF PULSE CURRENT TO ACIDIC COPPER PLATING , - 1979, WAN, CHI-CHAO |
| Electroforming With Heat-Resistant, Sulfur-Hardened Nickel , Oct - 1979, Wearmouth, W.R; Belt, K.C. |
| Effect of Ultrasonic Agitation on Silver Plating , - 1979, Wei, T.Y.; Wang, Y.Y.; Wan, C.C. |
| SOME PROPERTY-STRUCTURE RELATIONSHIPS IN ELECTRODEPOSITS AESF RESEARCH PROJECT 38 , - 1979, WEIL, R. DR. |
| POLLUTION CONTROL IN ANODIZING OPERATIONS , - 1979, WHITE, JOHN. |
| Precision Etching of Thick-Film Aluminum Circuits, Apr - 1979, Wiesner, H.J. |
| Some Mechanical Properties of Copper Electrodeposited From Pyrophosphate and Sulfate Solutions , Mar - 1979, Wiesner, H.J.; Frey, W.P. |
| CERAMIC/METALLIC THERMAL BARRIER COATINGS FOR GAS TURBINE ENGINES , - 1979, WILKINS, C.R. |
| Selective Gold Plating on Palladium--Titanium Conductor Patterns , Jan - 1979, Winters, Earl D. |
| INTRODUCTION TO ELECTROFORMING , - 1979, WORRELL, L. |
| A. ELECTROLESS NICKEL BATHS AS A FACTOR IN PRODUCING BLISTERS ON ALUMINUM , - 1979, YARLOSKY, E.; ALEKSINAS, M.; MARCZAK, |
| ULTRAFILTRATION OF CATHODIC ELECTRODEPOSITION PAINTS--SEVEN YEARS OF FIELD EXPERIENCE , Nov - 1979, ZAHKA, J.; MIR, L. |
| FUNCTIONAL AND DURABILITY TESTING OF SOLAR RECEIVER COATINGS , - 1979, ZERLAUT, G.A. |
| Investigation of Electroplated Electrical Contacts, - 1979, Kohlmann, William H |
| Effluent Guidelines and Standards; Electroplating Point Source Category; Pretreatment Standards for Existing Sources, - 1979, US EPA |
| Development Document for Existing Source Pretreatment Standards for the Electroplating, - 1979, US EPA |
| Technical Communication -- (Or—Your Old Technical Editor Strikes Again) -- The 20 th William Blum Lecture, Jun - 1979, Frederick B. Lowenheim |
| The 20th William Blum Lecture, Technical Communication – (Or—Your Old Technical Editor Strikes Again), - 1979, Frederick B. Lowenheim |
| A NEW AND NOVEL CHEMICAL FINISHING PROCESS FOR ALUMINUM WHICH PROVIDES CORROSION RESISTANCE AND BRILLIANT COLORS , - 1978, TUTTLE, J.N. |
| HIGH-ENERGY PLASMA-SPRAYED TUNGSTEN CARBIDE COBALT DEVELOPMENT FOR TURBINE APPLICATIONS , - 1978, WALLACE, F.J. |
| THICKNESS CALCULATIONS OF ELECTROPLATED DEPOSITIONS , - 1978, WEILER, G.G.; WARNECKE, H.J. |
| THROWING POWER IN ACID COPPER ELECTROLYTES, - 1978, WEILER, G.G. |
| EDDY CURRENT, MAGNETIC PROPERTIES AND IMPEDANCE MEASUREMENT TECHNIQUES , - 1978, WEINSTOCK, JACQUES J. |
| CONTROL FOR A MODERN ANODIZING FACILITY , - 1978, WHITE, J.N |
| Treatment of Complexed Copper Rinsewaters With Insoluble Starch Xanthate , Dec - 1978, Wing, R.E.; Rayford, W.E.; Doane, W.M. |
| BULK ANODIZING OF ALUMINUM , - 1978, YARD, D.H. |
| Troubleshooting Chloride Zinc Plating Solutions , Sep - 1978, Zehnder, J.A. |
| Magnetohydrodynamic Lightweight Channel Development, - 1978, Swallom, D. W. and Sonju, O. K. and Meader, D. E. and Heskey, G. T. |
| Research and Decorative Coatings -- The 19 th William Blum Lecture, Jun - 1978, Burton B. Knapp |
| The 19th William Blum Lecture, Research and Decorative Coatings, - 1978, Burton B. Knapp |
| NOTCH TENSILE TESTS FOR DETERMINING HYDROGEN EMBRITTLEMENT , - 1977, TURNS, E.W. |
| RECLAIMING PLATING WASTE WATER BY REVERSE OSMOSIS , - 1977, WARNKE, J.E.; THOMAS, K.G.; CREASON, S.C. |
| AUTOMATED PC PLATING - A RADICAL COST-CUTTING APPROACH , - 1977, WEISBERG, ALFRED M. |
| CONTINUOUS PLATING OF COPPER, NICKEL AND CHROMIUM ON WIDE STEEL STRIP FOR DECORATIVE AND FUNCTIONAL APPLICATIONS , - 1977, WETTWER, HAGEN |
| INSTRUMENT FOR MEASUREMENT OF ABSORPTANCE AND EMITTANCE , - 1977, WILEY, R.R. |
| SOLAR COLLECTORS FOR THE SHENANDOAH COMMUNITY CENTER , - 1977, WILLIAMS, R.J. DR. |
| AMBIENT-TEMPERATURE CONVERSION COATINGS OF ALUMINUM FOR SOLAR ABSORPTION , - 1977, WILLIAMS, R.K. |
| CHROMIC ACID RECOVERY: THREE PLANTS- THREE SOLUTIONS: , - 1977, WISNER, R.L.; |
| A SCIENTIFIC APPROACH TO ETCHBACK , - 1977, WITHERELL, DR D.R. |
| TITANIUM:ITS BEHAVIOR AS A RACK MATERIAL FOR ALUMINUM ANODIZING: , - 1977, WOODS, J.L.;. |
| LABORATORY STUDIES OF THE TREATABILITY OF ELECTROPLATING WASTE, - 1977, YOST, K.J.; SCARFI, A. |
| WHISKER GROWTH FROM A BRIGHT ACID TIN ELECTRODEPOSIT , Mar - 1977, ZAKRAYSEK, L. |
| Wear Characteristics of Sputtered vs. Electroplated Chromium on Aluminum, - 1977, Crowson, Andrew |
| Pollutant Generation by Air Force Electroplating Processes, - 1977, Daley, Peter S. |
| The Plater and Pollution -- The 18 th William Blum Lecture, Jun - 1977, Joseph B. Kushner |
| The 18th William Blum Lecture, The Plater and Pollution - How to Meet Water Quality Requirements without Offending the EPA, - 1977, Joseph B. Kushner |
| How to Save Dollars Through Proper Rinsing Techniques , Dec - 1976, D.A. Swalheim |
| What is the Precision of a Coating Thickness Measurement Made by Beta Backscatter? , Nov - 1976, A. Ott |
| CHROMIUM-GOLD THIN FILM METALLIZATION , - 1976, TRAEGER, R.K. |
| INSTRUMENTATION AND CONTROL OF ELECTROLESS COPPER PLATING SOLUTIONS , - 1976, TUCKER, DR. WILLIAM B. |
| THE COMPLEXITY OF THE POLYMER-METAL INTERFACE ELECTROLESS NICKEL VERSUS ELECTROLESS COPPER , - 1976, TUOMI, D. |
| ELECTROPLATED GOLD MOLYBDENUM ALLOY AS A SOLID FILM LUBRICANT , - 1976, TURNS, E.W. |
| EFFECT OF OPERATING VARIABLES ON THE RATE OF CHEMICAL MILLING OF ALUMINUM , - 1976, WALTON, R.F. |
| METHODS OF REDUCING POROSITY IN GOLD DEPOSITS , - 1976, WEISBERG, A.M.; SHOUSHANIAN, H.; MORRISSEY, R.J. |
| NON-CYANIDE-CONTAINING SILVER PLATING BATH, - 1976, WEISBERG, A.M.; SHOUSHANIAN, H. |
| SELECTIVE ABSORBER COATINGS BY INTERFERENCE TECHNIQUES , - 1976, WINEGARNER, RICHARD M. |
| BLACK PAINTS FOR SOLAR COLLECTORS: ARE THEY ALL THE SAME?, - 1976, WOLF, R.E.; RAY, C.; LAVAN, Z. |
| ANODIC COATINGS ON ALUMINUM AS SOLAR SELECTIVE SURFACES , - 1976, WOODS, J.L. |
| A NEW HARD ANODIZING PROCESS FOR ALUMINUM, - 1976, WOODS, J.L. |
| A NEW HARD ANODIZING PROCESS: , - 1976, WOODS, J.L.;. |
| PERFORMANCE OF A MILDLY-SELECTIVE COATING FROM THE CALDWELL CHEMICAL COATINGS CORPORATION, - 1976, YTTERHUS, J.A. |
| TIN WHISKER GROWTH FROM A BRIGHT ACID TIN ELECTROPLATED FINISH , - 1976, ZAKRAYSEK, L. |
| STANDARD FOR HYBRID MICROCIRCUITS , - 1976, ZIMMERMAN, D.D. |
| Electrodeposition and Government Laboratories -- The 17 th William Blum Lecture, Jun - 1976, Fielding Ogburn |
| The 16th William Blum Lecture, Theoretical and Practical Aspects of Alloy Plating, - 1976, Ernst Raub |
| The 17th William Blum Lecture, Electrodeposition and Government Laboratories, - 1976, Fielding Ogburn |
| AN EVALUATION OF THE WEAR PROPERTIES OF ELECTROLESS NICKEL , - 1975, TOPE, N.; BAKER, E.A.; JACKSON, B.C. |
| MEASUREMENT OF THIN GOLD FLASHES IN ELECTRONIC APPLICATIONS , - 1975, TROP, H.A.; LOGAN, W. |
| POSITIVE CONTACT TITANIUM ANODE HOOKS AND RODS FOR UNIFORM COPPER PLATING AND LOW MAINTENANCE , - 1975, TURNER, D.R. |
| CHROMIUM PLATING DIRECTLY ON ZINC DIE CASTINGS , - 1975, WARD, J.J.B.; COOK, A.R. |
| HEAT PIPE RADIATORS FOR THE TRANS-ALASKA PIPELINE , - 1975, WATER, E.D.; GERING, G.S.; GALATE, J.W. |
| SOLUTION CHEMISTRY CONTROL FOR NICKEL SULFAMATE ELECTROFORMING , - 1975, WEBER, J.R. |
| HIGH-SPEED HARD GOLD ELECTROLYTES - THE NEXT GENERATION, - 1975, WHITLAW, K.J.; MARTIN, J.L. |
| A SURVEY OF "NON-EXEMPLARY" CHEMICAL DESTRUCT TREATMENT SYSTEM PERFORMANCE , - 1975, YOST, K.J.; MASARIK, D.R. |
| CLARIFIERS AND LAMELLA SEPARATORS - A COMPARISON , - 1975, ZARAS, H. FRANK; WISNER, ROBERT L. |
| Theoretical and Practical Aspects of Alloy Plating -- The 16 th William Blum Lecture, Jun - 1975, Ernst Raub |
| The 15th William Blum Lecture, Electroplating, Electrochemistry and Electronics, - 1975, George Dubpernell |
| ELECTROPLATES ON TITANIUM: PROPERTIES AND EFFECTS , - 1974, TURNS, E.W.; BROWNING, J.W.; JONES, R.L. |
| CONTINUOUS PLATING OF SPLICING CONNECTORS FOR COMMUNICATIONS CABLES, - 1974, VOYTKO, J.E. |
| Ultrasonic Aging of Electroplating Solutions , Dec - 1974, Walker, Robert; Bridges, Christopher E. |
| CORROSION-ASSOCIATED BLISTERING OF PLATED PLASTICS , - 1974, WEDEL, R. |
| THE ORIGIN OF COLOR IN INTERNALLY COLORED ANODIC COATINGS ON Al 99.99 , - 1974, WEFERS, K.; EVANS, W.T. |
| APPLICATIONS OF TRANSMISSION ELECTRON MICROSCOPY FOR ELECTROPLATED METALS , - 1974, WEIL, R. |
| HYDROGEN EMBRITTLEMENT IN BARREL ALKALINE ZINC PLATING:, - 1974, ZEHNDER, J.; HAJDU, J.; NAGY, J.;. |
| Integral Glass Covers for Silicon Solar Cells, - 1974, Rauch, Sr., Harry W. and Ulrich, Donald R. |
| Integral Glass Covers for Silicon Solar Cells, - 1974, Rauch, Sr., Harry W. and Ulrich, Donald R. |
| Electroplating, Electrochemistry and Electronics -- The 15 th William Blum Lecture, Jun - 1974, George Dubpernell |
| The 13th William Blum Lecture, Polarization, - 1974, Thomas Percy Hoar |
| The 14th William Blum Lecture, Current Distribution on Microprofiles, - 1974, Otto Kardos |
| METALLIZATION OF POLYMERS WITHOUT PRIOR PRETREATMENT , - 1973, TOWNSEND, W.P.; EMERSON, J.A.; KENNEY, J.T. |
| RESEARCH PROJECT 29 INTERDIFFUSION IN THE COPPER-ELECTRODEPOSITED GOLD SYSTEM , - 1973, TURNS, J.C.; OWEN, E.L. |
| Properties of Electroless Ni Coatings on High Strength Steels , - 1973, Turns, E.W.; Browning, J.W. |
| PRODUCER'S VIEW ON GOLD , - 1973, WALLACE, R.E. |
| EFFECT OF THE ELECTROCOAT PAINT SYSTEM ON INDUSTRIAL PAINT EMISSION , - 1973, WEIDMAYER, L.W. |
| CATHODIC ELECTRODEPOSITION AND ULTRAFILTRATION APPLICATIONS IN ELECTROCOATING , - 1973, WISMER, M.; LEBRAS, L.R. |
| Current Distribution on Microprofiless -- The 14 th William Blum Lecture, Jun - 1973, Otto Kardos |
| RESEARCH PROJECT 30 CRYSTAL DEFECTS IN ELECTRODEPOSITS , - 1972, WEIL, R.; WU, J.B.C. |
| Boric/Sulfamic Acid Plating Baths for Coating Depleted Uranium , Oct - 1972, Wilkinson, B.D.; Childs, E.L. |
| JOB SHOP MAINTENANCE , - 1972, WOOLEY, R.J. |
| Conductive, Lusterless Coatings for Light Metals, - 1972, Layer, C. H. and Schaer, G. R. and Beach, J. G. and Safranek, W. H. |
| Polarization -- The 13 th William Blum Lecture, Jun - 1972, Thomas Percy Hoar |
| EFFECTS OF COBALT ON PROPERTIES OF MATED FILM NDRO WIRE , - 1971, TOLEDO, E.; WOLF, M.; BENNETT, C.; LAVASH, W. |
| SILVER-RHENIUM ALLOY PLATING--INDUSTRIAL DEVELOPMENT , Feb - 1971, TURNS, E.W. |
| SPRAY RINSE PARAMETER STUDY FOR CIRCUIT BOARDS, - 1971, WILLSON, D.L. |
| PREPARATION AND MAGNETIC PROPERTIES OF MAGNETITE THIN FILMS , - 1971, WOURI, E.R.; SPELIOTIS, D.E. |
| RECOVERY OF MIXED RINSE WATER BY MEANS OF ION EXCHANGE, May - 1971, ZIEVERS, J.F.; NOVOTNY, C.J. |
| Nickel Electrobonded Quartz Blanks, - 1971, Stanley, Joseph M |
| Some Practical and Theoretical Considerations
of Corrosion and the Role of Chromium -- The 12 th Wliiiam Blum Lecture, Jun - 1971, Jesse E. Stareck |
| The 12th William Blum Lecture, Some Practical and Theoretical Considerations of Corrosion and the Role of Chromium, - 1971, Jesse E. Stareck |
| EFFECTIVE NICKEL SALTS IN PERMALLOY PLATING BATHS FOR PRODUCTION OF DRO WIRE , May - 1970, TOLEDO, E.; SEMIENKO, P. |
| ETCHING AND GOLD PLATING OF COPPER-CLAD MYLAR LAMINATES, - 1970, TRAVIESO, R. |
| PROPERTIES OF FLEXIBLE PRINTED CIRCUITS MADE FROM COPPER-CLAD MYLAR LAMINATES , Dec - 1970, TRAVIESO, R. |
| STRENGTHENING OF ELECTRODEPOSITED LEAD AND LEAD ALLOYS, PT. 2: MECHANICAL PROPERTIES , Apr - 1970, VANDERVOORT, R.R.; RAYMOND, E.L.; WIESNER, H.J.; FREY, W.P. |
| EFFECT OF BENZOTRIAZOLE ON THE STRESS IN COPPER ELECTRODEPOSITS , Jun - 1970, WALKER, R. |
| AES RESEARCH PROJECT 30 DEFECTS IN THE EARLY STAGES OF ELECTROCRYSTALLIZATION , - 1970, WEIL, R.; NAKAHARA, S. |
| METAL FINISHING WASTES--METHODS OF DISPOSAL , Jan - 1970, ZIEVERS, J.F.; CRAIN, R.W.; BARCLAY, F.G. |
| Some Contributions of U.S. Supply Houses
to Plating Science and Technology -- The 11 th William Blum Lecture, Jun - 1970, Arthur H. DuRose |
| The 11th William Blum Lecture, Some Contributions of U.S. Supply Houses to Plating Science and Technology, - 1970, Arthur H. DuRose |
| CODEPOSITION OF FINELY DISPERSED PARTICLES WITH METALS , Nov - 1969, TOMASZEWSKI, T.W.; TOMASZEWSKI, L.C.; BROWN, H. |
| Air Pollution Potential from Electroplating Operations, - 1969, Diamond, Philip |
| The Nucleation Dependent Growth Layer:
A Structure Element in Electrocrystallization -- The 10 th William Blum Lecture, Jun - 1969, Prof. Dr. Hellmuth Fischer |
| MODIFIED COPPER FLUOBORATE BATH FOR MIRROR FINISH ON PLATED WIRE , - 1968, TOLEDO, EMIL |
| CHEMICAL MILLING OF ALUMINUM: INFLUENCE OF PROCESS VARIABLES , Dec - 1968, TURNS, E.W. |
| AUTOTITRATION OF COPPER(II) IN COPPER PLATING SOLUTIONS WITH EDTA , Aug - 1968, VOYDANOFF, E.S. |
| WASTE TREATMENT IN METAL FINISHING - U.S. AND EUROPEAN PRACTICES , Nov - 1968, ZIEVERS, J.F.; CRAIN, R.W.; BARCLAY, F.G. |
| Nickel and Its Alloys, - 1968, Rosenberg, Samuel J. |
| Addition Agents, Anions and Inclusions
in Bright Nickel Plating -- The 9 th William Blum Lecture, Jun - 1968, Dr. Henry Brown |
| The 8th William Blum Lecture, Mechanism of the Plating Process, - 1968, Dr. Henry B. Linford |
| The 9th William Blum Lecture, Addition Agents, Anions and Inclusions in Bright Nickel Plating, - 1968, Dr. Henry Brown |
| The 10th William Blum Lecture, The Nucleation Dependent Growth Layer: A Structure Element in Electrocrystallization, - 1968, Prof. Dr. Hellmuth Fischer |
| A STUDY OF THE EFFECTS OF SOME FACTORS ON DIMENSIONS OF IMAGES IN PHOTOSENSITIVE RESIST COATINGS , Nov - 1967, TULUMELLO, J.; HARDING, W.B. |
| PRECIOUS METAL ELECTRODEPOSITS FOR ELECTRICAL CONTACT SERVICE PLATING, , Aug - 1967, 2791. VINES, RAYMOND F. |
| THE EFFECT OF OTHER METALLIC IONS ON THE ELECTROCRYSTALLIZATION OF SILVER FROM NITRATE SOLUTIONS , Mar - 1967, YOUNG, JOHN P. |
| Vacuum sputtering process for chromium plating titanium alloys, phase 2, - 1967, Matley, T. and Luedeman, R. T |
| VACUUM SPUTTERING PROCESS FOR CHROMIUM PLATING TITANIUM ALLOYS, PHASE 2, - 1967, Matley, T. ; Luedeman, R. T. |
| Mechanism of the Plating Process -- The 8 th William Blum Lecture, Jun - 1967, Dr. Henry B. Linford |
| The 7th William Blum Lecture, Metallurgical Aspects of Electrodeposits, - 1967, Dr. Harold J. Read |
| ELECTROPLATING COBALT-60 WITHOUT RESIDUE, - 1966, Christensen, Carl J. ; Jacobsen, Andrew T. |
| Some practical considerations for reducing the surface resistivity of x-band components, - 1966, Kessler, Alan H. |
| Electroplating cobalt-60 without residue, - 1966, Christensen, Carl J. and Jacobsen, Andrew T. |
| Metallurgical Aspects of Electrodeposits -- The 7 th William Blum Lecture, Jun - 1966, Dr. Harold J. Read |
| Control of stress corrosion, - 1965, Wolff, R. H. |
| Manufacturing methods for electroplating silver, gold, and rhodium on electrical connector contacts, - 1965, Tweed, Rexford E. |
| The cellular structure of thick-layered anodic oxide films, - 1965, Tomashov, N. D. and Zalivalov, F. P. |
| Solid film lubricant substrates, - 1964, Murphy, G. P. and Meade, F. S. |
| Pem for electrochemical etched transistors, - 1964, Weisel, D. and Schmechel, D. |
| A survey of electroforming for fabricating structures, - 1964, Safranek, W. H. |
| Electroforming refractory metal alloys, - 1964, Turns, E. W. and Hildebrand, J. F. |
| Research and development of erosion and oxidation resistant coatings for graphite, - 1964, Goodman, E. and Thompson, R. and Hogland, T. |
| Research and development program of thermionic conversion of heat to electricity, volume 1, - 1964, Bristow, R. H. and Grossman, L. N. and Kaznoff, A. J |
| High temperature thermoelectric research, - 1964, Henderson, C. M. and Ault, R. G. and Beaver, E. R. and Harris, D. H. and Hedley, W. H. and Janowiecki, R. J. |
| ANNUAL AIR FORCE SCIENCE AND ENGINEERING SYMPOSIUM (11TH) Held in BROOKS AIR FORCE BASE, TEXAS on 20-22 OCTOBER 1964, - 1964, Aerospace Medical Div Brooks Afb Tx |
| Solar flat plate thermoelectric generator research, - 1964, Rush, Robert E. |
| Some Engineering Aspects of Electrodeposition -- The 6 th William Blum Lecture, Jun - 1964, Mr. R.A.F. Hammond |
| The 6th William Blum Lecture, Some Engineering Aspects of Electrodeposition, - 1964, Mr. R.A.F. Hammond |
| Control of stress corrosion, - 1963, Wolff, R. H. |
| Exploration of new methods for preventing galvanic corrosion between magnesium and steel, - 1963, Stelling, Donald K. |
| The effect of additives of electrodeposition and electrodissolution of metals, - 1963, Franklin, Thomas C. and Barrett, Jerry and Graves, Robert E. and Tibbals, Fred and Bowman, John |
| Inorganic chemistry process improvement, - 1963, Foertter, Lincoln I. and Long, Sam A. |
| Inorganic chemistry process improvement, - 1963, Foertter, Lincoln I. and Long, Sam A. |
| Manual of metal-to-ceramic sealing techniques, - 1963, Johnson, C. W. and Cheatham, E. W. |
| Ceramic to Metal Seals for High-Temperature Thermionic Converters, - 1963, |
| The preparation of thin metal foils by microtomy: an assessment of the technique, and its application to metallurgical investigations with the electron microscope, - 1963, Dennis, P. P. and Brammar, I. S. |
| Heat resistant conversion coatings for steel, - 1963, Wagner, Linden H. |
| Pitting of Decorative Nickel-Chromium Coatings -- The 5 th William Blum Lecture, Jun - 1963, Dr. W. Andrew Wesley |
| The 5th William Blum Lecture, Pitting of Decorative Nickel-Chromium Coatings, - 1963, Dr. W. Andrew Wesley |
| Materials - 4340 steel - stress corrosion and effects of banding literature survey, part 1. Stress corrosion, - 1962, Owen, H. P. |
| Processing-plating systems-unclad 2020 aluminum alloy-chemical and physical properties-evaluation of, - 1962, Armstrong, W. L |
| Process - plating - tin on aluminum and aluminum alloys - chemical and physical properties - investigation of, - 1962, Armstrong, W. L |
| Evaluation of cadmium plating systems for hydrogen embrittlement, - 1962, ozan, Theodore G. |
| Process - plating - crack - free chromium, cf-500, physical and chemical properties, evaluation of, - 1962, Turns, E. W. |
| Hydrogen embrittlement of electroplated high strength steels, - 1962, Forney, J. W. and Katlin, J. M |
| Flame heated thermionic converter research, - 1962, Martini, W. R. and McKisson, R. L. and Clark, E. V. |
| The Speed of Processes Involved in Electroplating:
Movement of Solute, Attainment of
the Steady State and Formation of Metal -- The 4 th William Blum Lecture, Jun - 1962, Dr. Abner Brenner |
| The 4th William Blum Lecture, The Speed of Processes Involved in Electroplating: Movement of Solute, Attainment of the Steady State and Formation of Metal, - 1962, Dr. Abner Brenner |
| Final design and construction details for a 6000 btu/hr. Thermoelectric air conditioner, - 1961, Howling, D. H. ; Bevans, R. S. |
| Evaluation of Unichrome cf-500 crack-free chromium electroplating process, - 1961, Perrin, G. Q. |
| Production of electroplated coatings with special magnetic properties, - 1961, Polukarov, Yu. M. |
| Conversion coating for chromium, - 1961, Wolff, R. H. and Hanson, A. C. |
| The Challenge Before Us -- The 3rd William Blum Lecture, Jun - 1961, Dr. Charles L. Faust |
| The 3rd William Blum Lecture, The Challenge Before Us, - 1961, Dr. Charles L. Faust |
| Selective Coatings for Extraterrestrial Solar Energy Conversion: A Fundamental Analysis, - 1960, Van Vliet, Robert M. |
| ELECTROPLATING WITH ALLOYS, - 1960, Vyacheslavov, P. M. |
| EVALUATION OF UNICHROME CF-500 CRACK-FREE CHROMIUM ELECTROPLATING PROCESS, - 1960, Perrin, G. Q. |
| Electroplating with alloys, - 1960, Vyacheslavov, P. M. |
| Dissolution and solubility of metals in lithium, - 1960, Minushkin, B. And Steinmetz, H. |
| Corrosion resistance, electrical conductivity and adhesion characteristics on material-coatings and adhesion characteristics, - 1960, Hooper, A. F. and George, J. C. and Keller, E. E. |
| High Temperature Surface Parameters for Solar Power, - 1960, Butler, C. F. and Jenkins, R. J. and Rudkin, R. L. and Laughridge, F. I. |
| Faraday’s Law Applied to Cleaning -- The 2nd William Blum Lecture, Jun - 1960, A. Kenneth Graham |
| The 2nd William Blum Lecture, Faraday’s Law Applied to Cleaning, - 1960, A. Kenneth Graham |
| Education and the Electroplating Industry -- The 1rst William Blum Lecture, Jun - 1959, Dr. William Blum |
| The 1st William Blum Lecture, Education and the Electroplating Industry, - 1959, Dr. William Blum |
| Material - zinc-treated magnesium - metal plating - physical properties - evaluation of, - 1958, Armstrong, W. L. |
| Material-finishes and coatings-zinc, silver, chromium, nickel plates. Effect of Electroplated and chemically plated coatings on strength, corrosion, heat resistant and abrasion resistant properties of 4340 steel at 280.000 to 300.000 PSI ultimate strength, - 1957, Forney, Jr., D. M. and Haney, R. J. and Wise, W. E. |
| High-Resolution Autoradiography, - 1955, Towe, George C. and Gomberg, Henry J. and Freeman, J. W. |
| On the question of the electrodeposition of 'black nickel', - 1954, Fedotyev, N. P. and Viacheslavov, P. M. and Gnusin, N. P. |
| Development of new polymers for aircraft application, - 1952, ADAMS, JOHN And HAEFNER, ALBERT And KESKKULA, HENNO |
| Preparation of Hard Oxide Films on Evaporated Aluminum Surfaces and Applications of Such Films, - 1949, Hass, Georg |
| Sponge Rollers and Flow Controller for Rinse Water Reduction at a Printed Circuit Board Manufacturer, May - 1996, [no author] |
| No-Clean/VOC Free Printed Circuit Board Assembly , May - 1996, [no author] |
| Hard Chromium Coatings with Sputter Deposition , May - 1996, [no author] |
| Evaluation of Five Waste Minimization Technologies at the General Dynamics Pomona Division: Bead Blast Paint Stripping , May - 1996, [no author] |
| Field Testing of In-Situ Phosphatizing Coatings, Jan - 1996, [no author] |
| Testing of Environmentally Preferred Architectural Coatings, May - 1996, [no author] |
