Presented in Partnership with:
 
 

Ask the Expert Question-and-Answer Archive (Wastewater Treatment)

by Mike McGinness, EcoShield Environmental Systems, Inc.
March, 2012

Calculating Chrome Discharge Limits

Q. My chrome discharge limit is-lets say- 0.5 mg/day. The wastewater flow is 400 gpd. If the result of my sampling was 0.12 mg/L. How do I know if I am in compliance?

A. Is your limit .5 mg/day, or .5 mg/l?

.5 mg/day is unusual, if not unheard of?

But to answer your question:

Take the (400 Gallons/day)*(.12 mg/Liter)*( 3.78 liters/gallon) = 181.44 mg/day of Chrome discharged

Best Regards,

Mike McGinness

 

| Home | Subscribe | Regulations | Compliance Assistance | News | Resources | Resource Locators | Directories | Online Training | About | Search | NASF.org |


The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation.
You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.

Please note that many of the regulatory discussions on STERC refer to federal regulations. In many cases, states or local governments have promulgated relevant rules and standards
that are different and/or more stringent than the federal regulations. Therefore, to assure full compliance, you should investigate and comply with all applicable federal, state and local regulations.