Presented in Partnership with:
 
 

 

Ask the Expert Question-and-Answer Archive (Wastewater Treatment)

by Mike McGinness, EcoShield Environmental Systems, Inc.
January, 2007

Alternatives to Chrome Passivates

Q. We pretreat (phosphating process) our steel sheets in preparation for powder coating. Is it really necessary to passivate/seal after zinc phosphating? Can I do away with this step and simply rinse the sheets with water after phosphating? Id like eliminate the use of chrome passivate. If passivation is necessary, can you suggest alternatives to chrome passivates?

A. I would not suggest eliminating the final sealer / rinse. It acts to improve corrosion resistance and acts to improve paint adhesion. Eliminating the sealer/rinse would substantially reduce paint adhesion and reduce corrosion resistance.

Most, if not all of the metal finishing specialty chemical manufacturers and suppliers have non-chromate sealers readily available. Give them a call.

 

| Home | Subscribe | Regulations | Compliance Assistance | News | Resources | Resource Locators | Directories | Online Training | About | Search | NASF.org |


The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation.
You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.

Please note that many of the regulatory discussions on STERC refer to federal regulations. In many cases, states or local governments have promulgated relevant rules and standards
that are different and/or more stringent than the federal regulations. Therefore, to assure full compliance, you should investigate and comply with all applicable federal, state and local regulations.