Ask the Expert Question-and-Answer Archive
(Hard Chrome Plating)

by Randy Taylor, Advanced Tooling Corporation.
November, 2006

Changing Brass to Black

Q. We have a brass base coffee talble with glass top. Can the base be painted or plated black?

A. "Painted black" No doubt it can be painted or powder coated, and that may be the simpler choice, especially if you're not all that particular about the end result, so long as it looks nice.

"Plated black"? Well that's a more challenging task and it depends on a number of things. For example, the condition of the brass metal, ability of the table to be disassembled, the accessibility for polishing and hand working, finding the right restoration house to do a quality job, and your willingness to pay a healthy price for all the work.

There are numerous black coatings available, "black chrome, black nickel, black copper, black conversion coatings for zinc and cadmium, black oxide, most are commercial wet processes but there are some antique shops that do black coatings. Good luck with your decision.

 

 

 

 


The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation.
You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.

Please note that many of the regulatory discussions on STERC refer to federal regulations. In many cases, states or local governments have promulgated relevant rules and standards
that are different and/or more stringent than the federal regulations. Therefore, to assure full compliance, you should investigate and comply with all applicable federal, state and local regulations.