Pollution Prevention and Control Technologies
for Plating Operations
A Project Sponsored by the National Center for Manufacturing
Sciences and Conducted in Cooperation with the National
Association of Metal Finishers
Library of Congress Cataloging-in-Publication Data
Cushnie, George C., Jr
Pollution Prevention and Control Technology for Plating Operations.
Includes bibliographical references.
1. Electroplating - Metal recovery.
2. Waste minimization - Handbooks, manuals, etc.
Copyright © 1994 by the National Center for Manufacturing
All rights reserved.
This book was prepared by CAI Engineering as contractor to
the National Center for Manufacturing Sciences, Inc. (NCMS). It
is protected both under the U.S. Copyright Act and applicable
state trade secret laws and may not be reproduced or disseminated
without the express written permission of the NCMS. (NCMS members
may reproduce and disseminate in accordance with their membership
contracts with the NCMS and the NCMS bylaws and policies and procedures.)
Neither NCMS, members of NCMS, nor any person or entity acting
on behalf of them:
Makes any warranty or representation with respect to the accuracy,
completeness, or usefulness of the information contained in this
Makes any warranty or representation that the use of information,
apparatus, method, or process disclosed in this report will not
infringe any proprietary rights of a third party.
Makes any warranty or representation that the information contained
in this report is statistically reliable or has been prepared
based on generally accepted analytical data collection procedures
or has been verified in any manner.
Assumes any liability with respect to the use of, or for damages
resulting from the use of, any information, apparatus, methods,
or process disclosed in this report.
The information and any express or implied opinions in this
book do not represent the opinions or views of the NCMS, members
of NCMS, or any person or company acting on behalf of the NCMS.
This book is intended only to be a factual report of responses
submitted by a cross section of manufacturers and vendors in the
electroplating industry. Reliance on the information contained
herein is at the user's own risk.
Neither the NCMS, its members, or any person or entity acting
on behalf of the NCMS makes any warranties whatsoever as to the
contents hereof, and all warranties of merchant ability and
fitness for purpose are hereby disclaimed.
National Center for Manufacturing Sciences
3025 Boardwalk Drive
Ann Arbor, MI 48108-3266
Back to Main Table of Contents